The bulk density of aggregates does not depend upon: (A) Size and shape of aggregates (B) Specific gravity of aggregates (C) Grading of aggregates (D) Size and shape of the container

The bulk density of aggregates does not depend upon:
(A) Size and shape of aggregates
(B) Specific gravity of aggregates
(C) Grading of aggregates
(D) Size and shape of the container
by

1 Answer

Answer :

Answer: Option D
by

Related questions

The bulk density of aggregates, depends upon (A) Shape (B) Grading (C) Compaction (D) All the above

Description : The bulk density of aggregates, depends upon (A) Shape (B) Grading (C) Compaction (D) All the above

Last Answer : Answer: Option D

The strength and quality of concrete, depend upon: (A) Grading of aggregates (B) Surface area of aggregates (C) Shape of aggregates (D) All the above

Description : The strength and quality of concrete, depend upon: (A) Grading of aggregates (B) Surface area of aggregates (C) Shape of aggregates (D) All the above

Last Answer : Answer: Option D

The strength and quality of concrete depends upon (i)Grading of aggregates (ii)Shape of aggregates (iii)Surface area of aggregates (iv)Surface texture of aggregates [ A ] i, ii and iv [ B ] ii, iii and iv [ C ] i, iii and iv [ D ] i, ii, iii and iv

Description : The strength and quality of concrete depends upon (i)Grading of aggregates (ii)Shape of aggregates (iii)Surface area of aggregates (iv)Surface texture of aggregates [ A ] i, ii and iv [ B ] ii, iii and iv [ C ] i, iii and iv [ D ] i, ii, iii and iv

Last Answer : [ D ] i, ii, iii and iv

The strength of durability of concrete depends upon. (a) Size of aggregates (b) Grading of aggregates (c) Moisture contents of aggregates (d) All of these.

Description : The strength of durability of concrete depends upon. (a) Size of aggregates (b) Grading of aggregates (c) Moisture contents of aggregates (d) All of these.

Last Answer : (d) All of these.

Pick up the incorrect statement from the following: (A) In properly graded aggregates, bulk density is more (B) In single size aggregates, bulk density is least (C) In single size aggregates, bulk density is maximum (D) None of these

Description : Pick up the incorrect statement from the following: (A) In properly graded aggregates, bulk density is more (B) In single size aggregates, bulk density is least (C) In single size aggregates, bulk density is maximum (D) None of these

Last Answer : Answer: Option C

According to Water-Cement Ratio Law, the strength of workable plastic concrete (A) Depends upon the amount of water used in the mix (B) Does not depend upon the quality of cement mixed with aggregates (C) Does not depend upon the quantity of cement mixed with aggregates (D) All the above

Description : According to Water-Cement Ratio Law, the strength of workable plastic concrete (A) Depends upon the amount of water used in the mix (B) Does not depend upon the quality of cement mixed with aggregates (C) Does not depend upon the quantity of cement mixed with aggregates (D) All the above

Last Answer : Answer: Option D

The bulk density of aggregates, is generally expressed as (A) tonnes/cubic metre (B) kg/cubic metre (C) kg/litre (D) g/cm3

Description : The bulk density of aggregates, is generally expressed as (A) tonnes/cubic metre (B) kg/cubic metre (C) kg/litre (D) g/cm3

Last Answer : (C) kg/litre

The bulk density of aggregates , is (a) kN/m3 (b) Kg/1tr (c) g/cm3 (d) All the above.

Description : The bulk density of aggregates , is (a) kN/m3 (b) Kg/1tr (c) g/cm3 (d) All the above.

Last Answer : (b) Kg/1tr

The general relationship between specific gravity (G), weight of water ( ), degree of saturation (Sr ), void ratio (e) and bulk density ( ), is (A) = (S - eSr ) /(1 + e) (B) = (G + eSr ) /(1 + e) (C) = (1 + e) /(G + Sr ) (D) = (1 - Sr ) e/(G + Sr )

Description : The general relationship between specific gravity (G), weight of water ( ), degree of saturation (Sr ), void ratio (e) and bulk density ( ), is (A) = (S - eSr ) /(1 + e) (B) = (G + eSr ) /(1 + e) (C) = (1 + e) /(G + Sr ) (D) = (1 - Sr ) e/(G + Sr )

Last Answer : (B) = (G + eSr ) /(1 + e)

I.S. Sieve Nos. 10 mm and 4.75 mm are generally used for grading of (A) Coarse aggregates (B) Fine aggregates (C) Neither (a) nor (b) (D) Both (a) and (b)

Description : I.S. Sieve Nos. 10 mm and 4.75 mm are generally used for grading of (A) Coarse aggregates (B) Fine aggregates (C) Neither (a) nor (b) (D) Both (a) and (b)

Last Answer : Answer: Option D

If a grading curve is horizontal between the portions of 20 mm I.S. Sieve and 4.75 mm I.S. Sieve, the graded aggregates do not contain (A) 20 mm particles (B) 10 mm particles (C) 4.75 mm particles (D) All the above

Description : If a grading curve is horizontal between the portions of 20 mm I.S. Sieve and 4.75 mm I.S. Sieve, the graded aggregates do not contain (A) 20 mm particles (B) 10 mm particles (C) 4.75 mm particles (D) All the above

Last Answer : Answer: Option D

The maximum amount of dust which may be permitted in aggregates is (A) 5% of the total aggregates for low workability with a coarse grading (B) 10% of the total aggregates for low workability with a fine grading (C) 20% of the total aggregates for a mix having high workability with fine grading (D) All the above

Description : The maximum amount of dust which may be permitted in aggregates is (A) 5% of the total aggregates for low workability with a coarse grading (B) 10% of the total aggregates for low workability with ... of the total aggregates for a mix having high workability with fine grading (D) All the above

Last Answer : Answer: Option D

For given workability the grading requiring the least amount of water is one that gives (A) Greatest surface area for the given cement and aggregates (B) Least surface area for the given cement and aggregates (C) Least weight for the given cement and aggregates (D) Greatest weight for the given cement and aggregates

Description : For given workability the grading requiring the least amount of water is one that gives (A) Greatest surface area for the given cement and aggregates (B) Least surface area for the given cement ... weight for the given cement and aggregates (D) Greatest weight for the given cement and aggregates

Last Answer : Answer: Option A

Index number expressing the relative sizes of both coarse and fine aggregates, is called (A) Proportioning of aggregates (B) Fineness modulus (C) Grading of aggregates (D) None of these

Description : Index number expressing the relative sizes of both coarse and fine aggregates, is called (A) Proportioning of aggregates (B) Fineness modulus (C) Grading of aggregates (D) None of these

Last Answer : Answer: Option B

Pick out the correct statement: (A) Removal of iron from ceramic material is necessitated (by magnetic separation method) so as to avoid discolouration of ceramic products (B) The operating cost of shaking screen is more than that of a vibrating screen (C) Screen capacity does not depend upon the specific gravity of the minerals (D) Asphalt is best crushed using toothed roll crusher

Description : Pick out the correct statement: (A) Removal of iron from ceramic material is necessitated (by magnetic separation method) so as to avoid discolouration of ceramic products (B) The operating cost of ... upon the specific gravity of the minerals (D) Asphalt is best crushed using toothed roll crusher

Last Answer : (A) Removal of iron from ceramic material is necessitated (by magnetic separation method) so as to avoid discolouration of ceramic products

The 28 days cube strength of mass concrete using aggregates of maximum size 5 cm for gravity dams should be (A) Between 150 to 300 kg/cm2 (B) Between 350 to 600 kg/cm2 (C) Between 150 to 500 kg/cm2 (D) Below 200 kg/cm2

Description : The 28 days cube strength of mass concrete using aggregates of maximum size 5 cm for gravity dams should be (A) Between 150 to 300 kg/cm2 (B) Between 350 to 600 kg/cm2 (C) Between 150 to 500 kg/cm2 (D) Below 200 kg/cm2

Last Answer : Answer: Option D

The factor which affects workability, is (A) Water content and its temperature (B) Shape and size of the aggregates (C) Air entraining agents (D) All the above

Description : The factor which affects workability, is (A) Water content and its temperature (B) Shape and size of the aggregates (C) Air entraining agents (D) All the above

Last Answer : (D) All the above

Which parameter is used for the grading of paraffin waxes? (A) Specific gravity (B) Melting point (C) Viscosity (D) Penetration number

Description : Which parameter is used for the grading of paraffin waxes? (A) Specific gravity (B) Melting point (C) Viscosity (D) Penetration number

Last Answer : (C) Viscosity

Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Description : Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

The specific yield of soil depends upon (A) Compaction of stratum (B) Distribution of pores (C) Shape and size of particles (D) All the above

Description : The specific yield of soil depends upon (A) Compaction of stratum (B) Distribution of pores (C) Shape and size of particles (D) All the above

Last Answer : (D) All the above

With an increase in size of tube, the rise or depression of liquid in the tube due to surface tension will (A) Decrease (B) Increase (C) Remain unchanged (D) Depend upon the characteristics of liquid

Description : With an increase in size of tube, the rise or depression of liquid in the tube due to surface tension will (A) Decrease (B) Increase (C) Remain unchanged (D) Depend upon the characteristics of liquid

Last Answer : Answer: Option A

The time period of a simple pendulum does not depend upon the mass of the body suspended at the free end of the string. This statement is known as ___________ . (A) law of gravity (B) law of mass (C) law of isochronism (D) law of length

Description : The time period of a simple pendulum does not depend upon the mass of the body suspended at the free end of the string. This statement is known as ___________ . (A) law of gravity (B) law of mass (C) law of isochronism (D) law of length

Last Answer : (B) law of mass

The rate of emission of radiation by a body does not depend upon the (A) Wavelength of radiation (B) Surface temperature of the body (C) Nature of the surface (D) Shape and porosity of the body

Description : The rate of emission of radiation by a body does not depend upon the (A) Wavelength of radiation (B) Surface temperature of the body (C) Nature of the surface (D) Shape and porosity of the body

Last Answer : (D) Shape and porosity of the body

The rate of emission of radiation by a body does not depend upon the (A) Wavelength of radiation (B) Surface temperature of the body (C) Nature of the surface (D) Shape and porosity of the body

Description : The rate of emission of radiation by a body does not depend upon the (A) Wavelength of radiation (B) Surface temperature of the body (C) Nature of the surface (D) Shape and porosity of the body

Last Answer : (D) Shape and porosity of the body

Tilth is related to a. Soil aggregates shape b. Soil aggregates size distribution c. Soil aggregates arrangement d. All of these

Description : Tilth is related to a. Soil aggregates shape b. Soil aggregates size distribution c. Soil aggregates arrangement d. All of these

Last Answer : d. All of these

Which of the following tests measures the toughness of road aggregates? (A) Crushing strength test (B) Abrasion test (C) Impact test (D) Shape test

Description : Which of the following tests measures the toughness of road aggregates? (A) Crushing strength test (B) Abrasion test (C) Impact test (D) Shape test

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) According to the petrological characteristics, concrete aggregates are classified as heavy weight, normal weight and light weight (B) According to the shape of the particles, concrete aggregates are classified as rounded irregular, angular and flaky (C) According to the surface texture of the particles, the concrete aggregates are classified as glassy, smooth, granular, rough, crystalline, honey combed and porous (D) All the above

Description : Pick up the correct statement from the following: (A) According to the petrological characteristics, concrete aggregates are classified as heavy weight, normal weight and light weight (B) According to ... glassy, smooth, granular, rough, crystalline, honey combed and porous (D) All the above

Last Answer : Answer: Option D

The aggregates of __________________-shape have maximum voids (a) Irregular (b) Angular (c)Rounded (d) Flaky

Description : The aggregates of __________________-shape have maximum voids (a) Irregular (b) Angular (c)Rounded (d) Flaky

Last Answer : (b) Angular

The aggregates of __________________-shape have manimum voids (a) Irregular (b) Angular (c)Rounded (d) Flaky

Description : The aggregates of __________________-shape have manimum voids (a) Irregular (b) Angular (c)Rounded (d) Flaky

Last Answer : (c)Rounded

The penetration of x-rays through an object depends upon the object’s _____. A. Density B. Shape C. Pressure D. Size

Description : The penetration of x-rays through an object depends upon the object’s _____. A. Density B. Shape C. Pressure D. Size

Last Answer : ANSWER: A

While Young's modulus ‘E’ relates to change in length and bulk modulus ‘K’ relates to change in volume, modulus of rigidity ‘G’ relates to change in: A. weight B. density C. shape D. temperature

Description : While Young's modulus ‘E’ relates to change in length and bulk modulus ‘K’ relates to change in volume, modulus of rigidity ‘G’ relates to change in: A. weight B. density C. shape D. temperature

Last Answer : . shape

The capacity of a pneumatic conveying system depends upon the (A) Bulk density of materials (B) Pressure of the conveying air (C) Diameter of the conveying line (D) All (A), (B) and (C)

Description : The capacity of a pneumatic conveying system depends upon the (A) Bulk density of materials (B) Pressure of the conveying air (C) Diameter of the conveying line (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Shell side pressure drop in a shell and tube heat exchanger does not depend upon the (A) Baffle spacing & shell diameter (B) Tube diameter & pitch (C) Viscosity, density & mass velocity of shell side fluid (D) None of these

Description : Shell side pressure drop in a shell and tube heat exchanger does not depend upon the (A) Baffle spacing & shell diameter (B) Tube diameter & pitch (C) Viscosity, density & mass velocity of shell side fluid (D) None of these

Last Answer : (D) None of these

Location of vena-contracta in an orificemeter does not depend upon the (A) Type of orifice (B) Density, viscosity & compressibility of the fluid (C) Ratio of pipe diameter to orifice diameter (D) Pipe roughness

Description : Location of vena-contracta in an orificemeter does not depend upon the (A) Type of orifice (B) Density, viscosity & compressibility of the fluid (C) Ratio of pipe diameter to orifice diameter (D) Pipe roughness

Last Answer : (A) Type of orifice

Drag force acting on a body does not depend upon the (A) Density of the fluid (B) Density of the body (C) Velocity of the body (D) Projected area of the body

Description : Drag force acting on a body does not depend upon the (A) Density of the fluid (B) Density of the body (C) Velocity of the body (D) Projected area of the body

Last Answer : (B) Density of the body

Transition from laminar flow to turbulent flow in fluid flow through a pipe does not depend upon the (A) Length of the pipe (B) Diameter of the pipe (C) Density of the fluid (D) Velocity of the fluid

Description : Transition from laminar flow to turbulent flow in fluid flow through a pipe does not depend upon the (A) Length of the pipe (B) Diameter of the pipe (C) Density of the fluid (D) Velocity of the fluid

Last Answer : (A) Length of the pipe

Friction factor for fluid flow in pipe does not depend upon the (A) Pipe length (B) Pipe roughness (C) Fluid density & viscosity (D) Mass flow rate of fluid

Description : Friction factor for fluid flow in pipe does not depend upon the (A) Pipe length (B) Pipe roughness (C) Fluid density & viscosity (D) Mass flow rate of fluid

Last Answer : A) Pipe length

Pick up the correct statement from the following: (A) Continuous grading is not necessary for obtaining a minimum of air voids (B) The omission of a certain size of aggregate is shown by a straight horizontal line on the grading curve (C) The omission of a certain size of aggregate in concrete increases the workability but also increases the liability to segregation (D) All the above

Description : Pick up the correct statement from the following: (A) Continuous grading is not necessary for obtaining a minimum of air voids (B) The omission of a certain size of aggregate is shown by ... in concrete increases the workability but also increases the liability to segregation (D) All the above

Last Answer : Answer: Option D

The risk of segregation is more for (A) Wetter mix (B) Larger proportion of maximum size aggregate (C) Coarser grading (D) All the above

Description : The risk of segregation is more for (A) Wetter mix (B) Larger proportion of maximum size aggregate (C) Coarser grading (D) All the above

Last Answer : Answer: Option D

Extensive properties of a thermodynamic system depend upon the __________ of the system. (A) Specific volume (B) Temperature (C) Mass (D) Pressure

Description : Extensive properties of a thermodynamic system depend upon the __________ of the system. (A) Specific volume (B) Temperature (C) Mass (D) Pressure

Last Answer : (C) Mass

If dry density, water density and specific gravity of solids of a given soil sample are 1.6 g/cc, 1.84 g/cc and 2.56 respectively, the porosity of the soil sample, is (A) 0.375 (B) 0.370 (C) 0.380 (D) 0.390

Description : If dry density, water density and specific gravity of solids of a given soil sample are 1.6 g/cc, 1.84 g/cc and 2.56 respectively, the porosity of the soil sample, is (A) 0.375 (B) 0.370 (C) 0.380 (D) 0.390

Last Answer : (A) 0.375

A sample of saturated soil has 30% water content and the specific gravity of soil grains is 2.6. The dry density of the soil mass in g/cm3 , is (A) 1.47 (B) 1.82 (C) 1.91 (D) None of these

Description : A sample of saturated soil has 30% water content and the specific gravity of soil grains is 2.6. The dry density of the soil mass in g/cm3 , is (A) 1.47 (B) 1.82 (C) 1.91 (D) None of these

Last Answer : (D) None of these

A pycnometer is used to determine (A) Water content and voids ratio (B) Specific gravity and dry density (C) Water content and specific gravity (D) Voids ratio and dry density

Description : A pycnometer is used to determine (A) Water content and voids ratio (B) Specific gravity and dry density (C) Water content and specific gravity (D) Voids ratio and dry density

Last Answer : (C) Water content and specific gravity

Fundamental relationship between dry density ( d), specific gravity (G), water content ( ) and percentage of air voids (na) is: (A) d = (1 - na) G (1 + ) (B) d = (1 + na) G (1 + ) (C) d = (1 + na) G (1 - ) (D) d = (1 - na) G (1 - )

Description : Fundamental relationship between dry density ( d), specific gravity (G), water content ( ) and percentage of air voids (na) is: (A) d = (1 - na) G (1 + ) (B) d = (1 + na) G (1 + ) (C) d = (1 + na) G (1 - ) (D) d = (1 - na) G (1 - )

Last Answer : Answer: Option A

19. The density of a liquid in kg/m3 is numerically equal to its specific gravity. A) True B) False

Description : 19. The density of a liquid in kg/m3 is numerically equal to its specific gravity. A) True B) False

Last Answer : A

The weight per unit volume of a liquid at a standard temperature and pressure is called (A) Specific weight (B) Mass density (C) Specific gravity (D) None of these

Description : The weight per unit volume of a liquid at a standard temperature and pressure is called (A) Specific weight (B) Mass density (C) Specific gravity (D) None of these

Last Answer : Answer: Option A

If 850 kg liquid occupies volume of one cubic meter, men 0.85 represents its (A) Specific weight (B) Specific mass (C) Specific gravity (D) Specific density

Description : If 850 kg liquid occupies volume of one cubic meter, men 0.85 represents its (A) Specific weight (B) Specific mass (C) Specific gravity (D) Specific density

Last Answer : Answer: Option C

The mass per unit volume of a liquid at a standard temperature and pressure is called (A) Specific weight (B) Mass density (C) Specific gravity (D) None of these

Description : The mass per unit volume of a liquid at a standard temperature and pressure is called (A) Specific weight (B) Mass density (C) Specific gravity (D) None of these

Last Answer : Answer: Option B

The ratio of specific weight of a liquid to the specific weight of pure water at a standard temperature is called (A) Density of liquid (B) Specific gravity of liquid (C) Compressibility of liquid (D) Surface tension of liquid

Description : The ratio of specific weight of a liquid to the specific weight of pure water at a standard temperature is called (A) Density of liquid (B) Specific gravity of liquid (C) Compressibility of liquid (D) Surface tension of liquid

Last Answer : Answer: Option B

Choose the correct relationship (A) Specific gravity = gravity × density (B) Dynamic viscosity = kinematic viscosity × density (C) Gravity = specific gravity × density (D) Kinematic viscosity = dynamic viscosity × density

Description : Choose the correct relationship (A) Specific gravity = gravity × density (B) Dynamic viscosity = kinematic viscosity × density (C) Gravity = specific gravity × density (D) Kinematic viscosity = dynamic viscosity × density

Last Answer : Answer: Option B