A certain thickness of the coal, if stored unscientifically on soft (katcha) ground having no metallic/concrete flooring gets sunked into the ground, which is termed as the 'carpet loss'. The carpet loss may be of the order of __________ cms. (A) 1 to 2 (B) 3 to 4 (C) 5 to 15 (D) 20 to 40

A certain thickness of the coal, if stored unscientifically on soft (katcha)
ground having no metallic/concrete flooring gets sunked into the ground,
which is termed as the 'carpet loss'. The carpet loss may be of the order of
__________ cms.
(A) 1 to 2
(B) 3 to 4
(C) 5 to 15
(D) 20 to 40
by

1 Answer

Answer :

(C) 5 to 15
by

Related questions

Sodium salt of higher molecular weight fatty acid is termed as the __________ soap. (A) Hard(B) Soft(C) Metallic(D) Lubricating

Description : Sodium salt of higher molecular weight fatty acid is termed as the __________ soap. (A) Hard (B) Soft (C) Metallic (D) Lubricating

Last Answer : (B) Soft

What is the critical radius of insulation (cms) for a metallic cylinder, if the convective heat transfer co-efficient with the ambient atmosphere is 5 W/m2. °K? Thermal conductivity of metal and insulation material are 40 and 0.1 W/m.°K respectively. (A) 2 (B) 8 (C) 10 (D) 40

Description : What is the critical radius of insulation (cms) for a metallic cylinder, if the convective heat transfer co-efficient with the ambient atmosphere is 5 W/m2. °K? Thermal conductivity of metal and insulation material are 40 and 0.1 W/m.°K respectively. (A) 2 (B) 8 (C) 10 (D) 40

Last Answer : (A) 2

Main boring diameter for petroleum well is 20-30 cms in diameter, while the depth of the oil well may be about __________ kms. (A) 0.1 to 0.5 (B) 1.5 to 4.5 (C) 7.5 to 12.5 (D) 15-20

Description : Main boring diameter for petroleum well is 20-30 cms in diameter, while the depth of the oil well may be about __________ kms. (A) 0.1 to 0.5 (B) 1.5 to 4.5 (C) 7.5 to 12.5 (D) 15-20

Last Answer : (B) 1.5 to 4.5

For constructing a terrazzo floor, Pick up the incorrect statement from the following: (A) A base course is prepared as in cement concrete flooring (B) A 32 mm thick layer of cement concrete (1 : 2 : 4) is laid on the base course and the surface is made smooth by trowelling (C) Glass strips are driven into the layer according to the pattern required (D) After final grinding is over, oxalic acid mixed with water is spread over and rubbed hard with soft material

Description : For constructing a terrazzo floor, Pick up the incorrect statement from the following: (A) A base course is prepared as in cement concrete flooring (B) A 32 mm thick layer of cement concrete ... final grinding is over, oxalic acid mixed with water is spread over and rubbed hard with soft material

Last Answer : Answer: Option B

The thickness of metallic shielding on cables is usually (a) 0.04 mm (b) 0.2 to 0.4 mm (e) 3 to 5 mm (d) 40 to 60 mm

Description : The thickness of metallic shielding on cables is usually (a) 0.04 mm (b) 0.2 to 0.4 mm (e) 3 to 5 mm (d) 40 to 60 mm

Last Answer : (a) 0.04 mm

According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than (A) 20 cm (B) 30 cm (C) 40 cm (D) 75 cm

Description : According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than (A) 20 cm (B) 30 cm (C) 40 cm (D) 75 cm

Last Answer : Answer: Option B

Lime concrete is generally used for (A) Wall foundations (B) Flooring at ground level (C) Both (A) and (B) (D) Neither (A) nor (b)

Description : Lime concrete is generally used for (A) Wall foundations (B) Flooring at ground level (C) Both (A) and (B) (D) Neither (A) nor (b)

Last Answer : Answer: Option B

Herringbone bond is used for (A) Walls having thickness more than 4 bricks (B) Architectural finish to the face work (C) Ornamental panels in brick flooring (D) All the above

Description : Herringbone bond is used for (A) Walls having thickness more than 4 bricks (B) Architectural finish to the face work (C) Ornamental panels in brick flooring (D) All the above

Last Answer : Answer: Option D

According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Description : According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Last Answer : Answer: Option C

The maximum thickness of concrete floor of a cement warehouse, is (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm

Description : The maximum thickness of concrete floor of a cement warehouse, is (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm

Last Answer : (D) 25 cm

Wind loss' resulting from unscientific storage of coal may be the order of about __________ percent. (A) 2.5 (B) 7.5 (C) 10.5 (D) 14.5

Description : Wind loss' resulting from unscientific storage of coal may be the order of about __________ percent. (A) 2.5 (B) 7.5 (C) 10.5 (D) 14.5

Last Answer : (A) 2.5

Shaving soaps are (A) Soft potassium soaps (potassium salt of fatty acid) with free Stearic acid to give lather a lasting property (B) Metallic soaps compounded with frothing agents (C) High free alkali soaps having excess of cane sugar and alcohol (D) None of these

Description : Shaving soaps are (A) Soft potassium soaps (potassium salt of fatty acid) with free Stearic acid to give lather a lasting property (B) Metallic soaps compounded with frothing agents (C) High free alkali soaps having excess of cane sugar and alcohol (D) None of these

Last Answer : (A) Soft potassium soaps (potassium salt of fatty acid) with free Stearic acid to give lather a lasting property

Three materials A, B and C of equal thickness and of thermal conductivity of 20, 40 & 60 kcal/hr. m. °C respectively are joined together. The temperature outside of A and C are 30°C and 100°C respectively. The interface between B and C will be at a temperature of __________ °C. (A) 40 (B) 95 (C) 70 (D) 50

Description : Three materials A, B and C of equal thickness and of thermal conductivity of 20, 40 & 60 kcal/hr. m. °C respectively are joined together. The temperature outside of A and C are 30°C and 100°C respectively. The interface ... C will be at a temperature of __________ °C. (A) 40 (B) 95 (C) 70 (D) 50

Last Answer : (C) 70

Tar yield in the low temperature and high temperature carbonisation of dry coal may be respectively __________ percent. (A) 3 & 10 (B) 10 & 3 (C) 10 & 20 (D) 15 & 8

Description : Tar yield in the low temperature and high temperature carbonisation of dry coal may be respectively __________ percent. (A) 3 & 10 (B) 10 & 3 (C) 10 & 20 (D) 15 & 8

Last Answer : (B) 10 & 3

The equivalent diameter of channel of a constant non-circular cross￾section of 3 cm by 6 cm will be __________ cms. (A) 20 (B) 12 (C) 8 (D) 2

Description : The equivalent diameter of channel of a constant non-circular cross￾section of 3 cm by 6 cm will be __________ cms. (A) 20 (B) 12 (C) 8 (D) 2

Last Answer : (D) 2

The peripheral velocity at inlet of a centrifugal pump having inlet diameter of 25 cms and rotating at 950 rpm is __________ m/sec. (A) 1.8 (B) 12.4 (C) 186.2 (D) 736.4

Description : The peripheral velocity at inlet of a centrifugal pump having inlet diameter of 25 cms and rotating at 950 rpm is __________ m/sec. (A) 1.8 (B) 12.4 (C) 186.2 (D) 736.4

Last Answer : (B) 12.4

The thickness of bituminous carpet varies from (A) 20 to 25 mm (B) 50 to 75 mm (C) 75 to 100 mm (D) 100 to 120 mm

Description : The thickness of bituminous carpet varies from (A) 20 to 25 mm (B) 50 to 75 mm (C) 75 to 100 mm (D) 100 to 120 mm

Last Answer : Answer: Option A

A journal bearing with hydrodynamic lubrication is running steadily with a certain amount of minimum film thickness. When the load and speed are doubled, how does the minimum film thickness vary? [IES-2008] (a) Remains unchanged (b) Gets doubled (c) Gets reduced to one-fourth of original value (d) Gets reduced to half of original value

Description : A journal bearing with hydrodynamic lubrication is running steadily with a certain amount of minimum film thickness. When the load and speed are doubled, how does the minimum film thickness vary? [IES-2008 ... Gets reduced to one-fourth of original value (d) Gets reduced to half of original value

Last Answer : (a) Remains unchanged

The strength of concrete using air entraining cement gets reduced by (a) 5 to 10% (b) 10 to 15% (c) 15 to 20% (d) 20 to 25%

Description : The strength of concrete using air entraining cement gets reduced by (a) 5 to 10% (b) 10 to 15% (c) 15 to 20% (d) 20 to 25%

Last Answer : (b) 10 to 15%

The danger level should be marked with a bright red band …… wide centrally over a white band …… wide for a length of……… a) 5 cm, 10 cm, 60 cms* b) 10 cm, 20 cm, 60 cm c) 15 cm, 30 mm, 60 cm d) None of the above

Description : The danger level should be marked with a bright red band …… wide centrally over a white band …… wide for a length of……… a) 5 cm, 10 cm, 60 cms* b) 10 cm, 20 cm, 60 cm c) 15 cm, 30 mm, 60 cm d) None of the above

Last Answer : a) 5 cm, 10 cm, 60 cms*

Solid Hardwood Flooring vs. Carpet?

Description : Solid Hardwood Flooring vs. Carpet?

Last Answer : Hardwood floors are 100% more durable than most carpets. Also hardwood floors will bring more resale value to your home because of the lasting value.

During percussion drilling (A) Ground water observations are hindered due to entry of the slurry in the soil below the bottom of the hole (B) Caving or mixing of strata are caused in soft soils or cohesionless soils (C) The soil to a considerable depth below the bottom of the hole gets disturbed (D) All the above

Description : During percussion drilling (A) Ground water observations are hindered due to entry of the slurry in the soil below the bottom of the hole (B) Caving or mixing of strata are caused in soft soils or ... The soil to a considerable depth below the bottom of the hole gets disturbed (D) All the above

Last Answer : Answer: Option D

If a is the offset of concrete bed in cms, and d is the depth of concrete bed in cms, then (A) d = 0.445 a (B) d = 0.557 a (C) d = 0.775 a (D) None of these

Description : If a is the offset of concrete bed in cms, and d is the depth of concrete bed in cms, then (A) d = 0.445 a (B) d = 0.557 a (C) d = 0.775 a (D) None of these

Last Answer : Option C

The following statements relate to the RA 9298. Which statement is true? a. The Professional Regulation Commission has the authority to remove any member of the Board of Accountancy for negligence, incompetence, or any other just cause. b. No person shall be appointed as a member of the Board of Accountancy unless he has been in the practice of accountancy for at least 10 years, among others. c. Insanity is not a ground for proceeding against a CPA. d. After three years, subject to certain conditions, the Board of Accountancy may order the reinstatement of a CPA whose certificate of registration has been revoked.

Description : The following statements relate to the RA 9298. Which statement is true? a. The Professional Regulation Commission has the authority to remove any member of the Board of Accountancy for ... of Accountancy may order the reinstatement of a CPA whose certificate of registration has been revoked.

Last Answer : No person shall be appointed as a member of the Board of Accountancy unless he has been in the practice of accountancy for at least 10 years, among others

Transparent soaps (e.g. Pears) are (A) Usually soft soap (made from coconut oil) in which cane sugar & alcohol are added and finally washed with methylated spirit to achieve transparency (B) Metallic soaps with frothing agent and free Stearic acid to achieve transparency (C) Metallic soaps with frothing agent from which glycerine has not been recovered (D) None of these

Description : Transparent soaps (e.g. Pears) are (A) Usually soft soap (made from coconut oil) in which cane sugar & alcohol are added and finally washed with methylated spirit to achieve transparency (B) ... (C) Metallic soaps with frothing agent from which glycerine has not been recovered (D) None of these

Last Answer : (A) Usually soft soap (made from coconut oil) in which cane sugar & alcohol are added and finally washed with methylated spirit to achieve transparency

The excess air required for the combustion of pulverised coal is of the order of about __________ percent. (A) 5 (B) 15 (C) 30 (D) 45

Description : The excess air required for the combustion of pulverised coal is of the order of about __________ percent. (A) 5 (B) 15 (C) 30 (D) 45

Last Answer : (B) 15

The pipe wall thickness is minimum for a pipe of given nominal size having schedule number (A) 160 (B) 120 (C) 80 (D) 40

Description : The pipe wall thickness is minimum for a pipe of given nominal size having schedule number (A) 160 (B) 120 (C) 80 (D) 40

Last Answer : (D) 40

For compacting plain concrete road surface of thickness less than 20 cm, we use (A) Internal vibrator (B) Screed vibrator (C) Form vibrator (D) None of these

Description : For compacting plain concrete road surface of thickness less than 20 cm, we use (A) Internal vibrator (B) Screed vibrator (C) Form vibrator (D) None of these

Last Answer : Answer: Option B

For compacting plain concrete road surface of thickness less than 20 cm, the following vibrator is used. [ A ] Internal vibrator [ B ] Screed vibrator [ C ] Form vibrator [ D ] None of the above

Description : For compacting plain concrete road surface of thickness less than 20 cm, the following vibrator is used. [ A ] Internal vibrator [ B ] Screed vibrator [ C ] Form vibrator [ D ] None of the above

Last Answer : [ B ] Screed vibrator

Rod mills employed for grinding (A) Employ a steel shell having L/D ratio of 1.5 to 3.0 (B) Is useful for handling sticky materials (C) Employ steel rods of 2-12 cms diameter extending over full length of the mill (D) All 'a', 'b' & 'c'

Description : Rod mills employed for grinding (A) Employ a steel shell having L/D ratio of 1.5 to 3.0 (B) Is useful for handling sticky materials (C) Employ steel rods of 2-12 cms diameter extending over full length of the mill (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

For reinforced concrete work, aggregates having a nominal size of -------- are generally used [ A ] 20 mm [ B ] 40 mm [ C ] 50 mm [ D ] 60 mm

Description : For reinforced concrete work, aggregates having a nominal size of -------- are generally used [ A ] 20 mm [ B ] 40 mm [ C ] 50 mm [ D ] 60 mm

Last Answer : [ A ] 20 mm

Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Description : Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Last Answer : (B) 25-30

A furnace is made of a refractory brick wall of thickness 0.5 metre and thermal conductivity 0.7 W/m.°K For the same temperature drop and heat loss, this refractory wall can be replaced by a layer of diatomaceous earth of thermal conductivity 0.14 W/m.K and thickness __________ metre. (A) 0.01 (B) 0.1 (C) 0.25 (D) 0.5

Description : A furnace is made of a refractory brick wall of thickness 0.5 metre and thermal conductivity 0.7 W/m.°K For the same temperature drop and heat loss, this refractory wall can be replaced by a layer of diatomaceous earth of ... and thickness __________ metre. (A) 0.01 (B) 0.1 (C) 0.25 (D) 0.5

Last Answer : (B) 0.1

A fluid (µ/ρ) = 0.01 cm2 /sec is moving at critical flow condition (NRe = 2100) through a pipe of dia 3 cms. Velocity of flow is __________ cm/sec. (A) 7 (B) 700 (C) 7000 (D) 630

Description : A fluid (µ/ρ) = 0.01 cm2 /sec is moving at critical flow condition (NRe = 2100) through a pipe of dia 3 cms. Velocity of flow is __________ cm/sec. (A) 7 (B) 700 (C) 7000 (D) 630

Last Answer : (A) 7

A mercury (specific gravity = 13.6) manometer connected across an orificemeter fitted in a pipe shows a manometer reading of 2 cms. If the manometer liquid is changed to carbon tetrachloride (specific gravity = 1.6), then for the same flow rate of water the new manometer reading will be __________ cms. (A) 17 (B) 42(C) 84 (D) 1.8

Description : A mercury (specific gravity = 13.6) manometer connected across an orificemeter fitted in a pipe shows a manometer reading of 2 cms. If the manometer liquid is changed to carbon tetrachloride (specific gravity = 1.6), then ... new manometer reading will be __________ cms. (A) 17 (B) 42 (C) 84 (D) 1.8

Last Answer : __________ cms. (A) 17

A hydraulic press has a ram of 10 cms in diameter and a plunger of 1 cm in diameter. The force required on the plunger to raise a weight of 10 tons on the ram is __________ kg. (A) 10 (B) 100 (C) 1000 (D) 10000

Description : A hydraulic press has a ram of 10 cms in diameter and a plunger of 1 cm in diameter. The force required on the plunger to raise a weight of 10 tons on the ram is __________ kg. (A) 10 (B) 100 (C) 1000 (D) 10000

Last Answer : (B) 100

Pick out the wrong statement. (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment (B) The emissivity of a surface increases with increase in surface roughness (C) The emissivity of a polished surface is quite low (D) The emissivity of a non-metallic surface decreases with increase in the temperature

Description : Pick out the wrong statement. (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment (B) The emissivity of a surface increases with increase in surface roughness ... quite low (D) The emissivity of a non-metallic surface decreases with increase in the temperature

Last Answer : (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment

Actual operating speed of a ball mill may vary from 65 to 80% of the critical speed. Which of the following duties would require the ball mill to be operated at maximum percentage of critical speed? (A) Wet grinding in low viscous suspension (B) Wet grinding in high viscous suspension (C) Dry grinding of large particles (upto 1.25 cms) (D) Dry grinding of large particles in un-baffed mills

Description : Actual operating speed of a ball mill may vary from 65 to 80% of the critical speed. Which of the following duties would require the ball mill to be operated at maximum percentage of critical speed? (A) ... of large particles (upto 1.25 cms) (D) Dry grinding of large particles in un-baffed mills

Last Answer : (D) Dry grinding of large particles in un-baffed mills

Maximum heat dissipation occurs from a steel wire (k = 0.5 W/m. k) of 15 mm diameter exposed to air (h = 20W/m2.k), when the insulation thickness is __________ mm. (A) 15 (B) 25 (C) 10 (D) 30

Description : Maximum heat dissipation occurs from a steel wire (k = 0.5 W/m. k) of 15 mm diameter exposed to air (h = 20W/m2.k), when the insulation thickness is __________ mm. (A) 15 (B) 25 (C) 10 (D) 30

Last Answer : (B) 25

Best type of piles for soft soil having little resistance to the flow of concrete, is (A) Simplex pile (B) Vibro pile (C) Raymond pile (D) Franki pile

Description : Best type of piles for soft soil having little resistance to the flow of concrete, is (A) Simplex pile (B) Vibro pile (C) Raymond pile (D) Franki pile

Last Answer : Answer: Option B

Ash content in the coke produced from a coking coal having 20% ash may be around __________ percent. (A) 6 (B) 12 (C) 18 (D) 24

Description : Ash content in the coke produced from a coking coal having 20% ash may be around __________ percent. (A) 6 (B) 12 (C) 18 (D) 24

Last Answer : (D) 24

If the width of a pavement slab is 7.5 m, thickness 20 cm and working stress 1400 kg/cm2 , spacing of 10 mm tie bars for the longitudinal joint, is (A) 10 cm (B) 20 cm (C) 30 cm (D) 40 cm

Description : If the width of a pavement slab is 7.5 m, thickness 20 cm and working stress 1400 kg/cm2 , spacing of 10 mm tie bars for the longitudinal joint, is (A) 10 cm (B) 20 cm (C) 30 cm (D) 40 cm

Last Answer : Answer: Option C

How does the cost of slate flooring compare to concrete?

Description : How does the cost of slate flooring compare to concrete?

Last Answer : A finished concrete floor is generally less expensive than a slate or stone floor. A simple professionally poured concrete floor can average about $5.00 a square meter. An installed slate floor costs ... . Stamped concrete is also an option that looks nice but it is still less than slate.

For the construction of buildings, the subheads of the estimate are (A) Earthwork, Concrete work, Brick work (B) Brickwork, Stone work, Roofing (C) Brickwork Flooring, Wood work, Steel work (D) All the above

Description : For the construction of buildings, the subheads of the estimate are (A) Earthwork, Concrete work, Brick work (B) Brickwork, Stone work, Roofing (C) Brickwork Flooring, Wood work, Steel work (D) All the above

Last Answer : (D) All the above

How to Level a Concrete Slab Before Flooring ?

Description : How to Level a Concrete Slab Before Flooring ?

Last Answer : How to Level a Concrete Slab Before Flooring This is a project that shouldn't be too difficult to tackle. Leveling a concrete slab should be done when it's not too cold outside or raining, since ... as necessary to match the surrounding concrete. Stay off the floors for at least 12 to 24 hours.

A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. Specific heat of block material is 0.4 kJ.kg-1. K-1. Ignoring the effect of expansion and contraction and also the heat capacity to tank, the total entropy change in kJ.kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Description : A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. ... .kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Last Answer : (B) 0

The optimum moisture content in solids to be crushed/ground ranges from __________ percent. (A) 3 to 4 (B) 8 to 10 (C) 10 to 15 (D) 15 to 20

Description : The optimum moisture content in solids to be crushed/ground ranges from __________ percent. (A) 3 to 4 (B) 8 to 10 (C) 10 to 15 (D) 15 to 20

Last Answer : (A) 3 to 4

What is a soft metallic element?

Description : What is a soft metallic element?

Last Answer : leadsymbol Pb