Site order book is used for recording (A) Instructions by the executive engineers (B) Construction measurements (C) Issue of store equipments (D) Names of the casual labour

Site order book is used for recording
(A) Instructions by the executive engineers
(B) Construction measurements
(C) Issue of store equipments
(D) Names of the casual labour
by

1 Answer

Answer :

(A) Instructions by the executive engineers
by

Related questions

Mobilization advance up to 10% of the cost of work is given to a contractor (A) On commencement of work at site for payment of loan taken by him (B) For the purchase of construction materials (C) For the payment of advances to labour and other staff (D) For all activities required to start the work at site on finalization of the contract document

Description : Mobilization advance up to 10% of the cost of work is given to a contractor (A) On commencement of work at site for payment of loan taken by him (B) For the purchase of construction ... staff (D) For all activities required to start the work at site on finalization of the contract document

Last Answer : (D) For all activities required to start the work at site on finalization of the contract document

While filling the tender for any work, the contractor considers (A) Site survey (B) Availability of construction materials (C) Availability of labour (D) All the above

Description : While filling the tender for any work, the contractor considers (A) Site survey (B) Availability of construction materials (C) Availability of labour (D) All the above

Last Answer : (D) All the above

Knowledge of hydrology is necessary for civil engineers for (A) Designing and construction of irrigation structures (B) Designing and construction of bridges and culverts (C) Flood control works (D) All the above

Description : Knowledge of hydrology is necessary for civil engineers for (A) Designing and construction of irrigation structures (B) Designing and construction of bridges and culverts (C) Flood control works (D) All the above

Last Answer : Answer: Option D

Mention the name of form for recording the casual leave form Est.-50

Description : Mention the name of form for recording the casual leave form Est.-50

Last Answer : form Est.-50

In India, are prefabricated components costlier than those of traditional cast-in-situ items that the prefabricated components replace? (A) Yes, because of heavier overheads and handling cost (B) Yes, because of the very high order of quality control for the factory made components (C) No, because of repetitive manufacture of a number of elements (D) No, because of savings in site labour

Description : In India, are prefabricated components costlier than those of traditional cast-in-situ items that the prefabricated components replace? (A) Yes, because of heavier overheads and handling cost (B) Yes, ... of repetitive manufacture of a number of elements (D) No, because of savings in site labour

Last Answer : (C) No, because of repetitive manufacture of a number of elements

How did Philip Randolph plan to pressure Roosevelt to issue executive order 8802 which mandates fair hiring for government- funded jobs?

Description : How did Philip Randolph plan to pressure Roosevelt to issue executive order 8802 which mandates fair hiring for government- funded jobs?

Last Answer : by holding a protest march

Alternative energy - why not an executive order that every new construction have solar panels?

Description : Alternative energy - why not an executive order that every new construction have solar panels?

Last Answer : I’d be down for that.

A construction schedule is prepared after collecting (A) Number of operations (B) Output of labour (C) Output of machinery (D) All the above

Description : A construction schedule is prepared after collecting (A) Number of operations (B) Output of labour (C) Output of machinery (D) All the above

Last Answer : (D) All the above

During the construction period, price variation clause in contracts caters to (A) Increase in rates of only important materials (B) Variation in cost in materials element, labour element and petrol-oil-lubricant element (C) Variation in total cost of the project on an ad hoc basis (D) Rate of inflation

Description : During the construction period, price variation clause in contracts caters to (A) Increase in rates of only important materials (B) Variation in cost in materials element, labour element and petrol-oil-lubricant ... ) Variation in total cost of the project on an ad hoc basis (D) Rate of inflation

Last Answer : (B) Variation in cost in materials element, labour element and petrol-oil-lubricant element

A contractor wishes to determine a suitable combination of manual labour and machine work for the excavation of a multistory construction. For every cum of excavation, 3 man-hours are needed; or 0.2 machine-hour. Costs involved are Rs. 20 per man-hour and Rs. 500 per machine-hour. The total quantity of excavation is estimated to be 4,000 cum. The optimal quantity of excavation to be done manually for minimum total cost will be (a) 1500 cum (b) 1800 cum (c) 2250 cum (d) 2500 cum

Description : A contractor wishes to determine a suitable combination of manual labour and machine work for the excavation of a multistory construction. For every cum of excavation, 3 man-hours are needed; or 0.2 machine-hour. Costs ... total cost will be (a) 1500 cum (b) 1800 cum (c) 2250 cum (d) 2500 cum

Last Answer : (d) 2500 cum

How does construction of dams and canals create employment in large numbers in rural areas? (a) Large number of engineers are needed

Description : How does construction of dams and canals create employment in large numbers in rural areas? (a) Large number of engineers are needed

Last Answer : Take the case of Laxmi with her two-hectare plot of unirrigated land. The government can ... (d) Executives and administrators can easily be adjusted

Why did the engineers of the longest continuous-span suspension bridge in the world change the blueprints after construction started?

Description : Why did the engineers of the longest continuous-span suspension bridge in the world change the blueprints after construction started?

Last Answer : (Earthquake)

Write the names of any 4 personal protective equipments.

Description : Write the names of any 4 personal protective equipments.

Last Answer : Names of personal protective equipment: 1. Helmet 2. Hard hat 3. Goggles 4. Ear plug 5. Ear muff 6. Apron 7. Hand gloves 8. Boots 9. Safety shoes

Suppose marketers at Lever Brothers are trying to determine whether the use of money off coupons for detergent was the reason for a sales increase in a particular store. The type of study conducted to answer this question would be: A)exploratory B)descriptive C)casual D)qualitative

Description : Suppose marketers at Lever Brothers are trying to determine whether the use of money off coupons for detergent was the reason for a sales increase in a particular store. The type of study conducted to answer this question would be: A)exploratory B)descriptive C)casual D)qualitative

Last Answer : C)casual

The Overall in-charge of an organisation at the site responsible for the execution of the works, is (A) Executive Engineer (B) Engineer (C) Junior Engineer (D) Assistant Engineer

Description : The Overall in-charge of an organisation at the site responsible for the execution of the works, is (A) Executive Engineer (B) Engineer (C) Junior Engineer (D) Assistant Engineer

Last Answer : (B) Engineer

Which of the following statements is/are correct? 1. A materials requisition note is used to record the issue of direct material to a specific job. 2. A typical job cost will contain actual costs for material, labour and production overheads, and non –production overheads are often added as a percentage of total production cost 3. The job costing method can be applied in costing batches (a) (1) only (b) (1) and (2) only (c) (1) and (3) only (d) (2) and (3) only

Description : Which of the following statements is/are correct? 1. A materials requisition note is used to record the issue of direct material to a specific job. 2. A typical job cost will contain actual costs for material, labour and production ... 1) and (2) only (c) (1) and (3) only (d) (2) and (3) only

Last Answer : (c) (1) and (3) only

Was it a violation of power or an ethical issue with regards to the the Canadian political fiasco of Jody Wilson Raybould secretely recording a conversation with Clerk of the Privy Council Michael Wernick ?

Description : Was it a violation of power or an ethical issue with regards to the the Canadian political fiasco of Jody Wilson Raybould secretely recording a conversation with Clerk of the Privy Council Michael Wernick ?

Last Answer : They had this same question on CBC radio, the answer was yes and no under certain circumstances really looking forward to how this all plays out.

A recording and typing issue?

Description : A recording and typing issue?

Last Answer : Maybe if you use an external microphone. You can’t really eliminate ambient noise.

Malini has recently joined a construction company as marketing executive. She saw a presentation about the company. -Technology

Description : Malini has recently joined a construction company as marketing executive. She saw a presentation about the company. -Technology

Last Answer : 1. Insert Picture2. Record Narration3. Hyperlink/Interaction feature4. Header and Footer dialog box

1. Which type of coal is difficult to light in the open air? 2. Leukaemia or blood cancer is characterised by abnormal increase of which cells? 3. Howmany subjects are in the Union list? 4. Which instrument instrument used for recording earthquake waves? 5. Which Mughalemperor gave land for the construction of the Golden Temple at Amritsar?

Description : 1. Which type of coal is difficult to light in the open air? 2. Leukaemia or blood cancer is characterised by abnormal increase of which cells? 3. Howmany subjects are in the Union list? ... ship was sailing? 20. Which gave an impetus to the growth of militant nationalism on a widespread scale?

Last Answer : Answer : 1. Peat 2. White blood cells 3. 97 subjects 4. Seismograph 5. Akbar 6. Loss of electrons 7. Bangladesh 8. Under valuation of the assets. 9. Volcanoes 10. Guru Gobind Singh 11. ... 15. Wandiwash 16. Western Australia 17. Kathak 18. Pitcher plant 19. Mediterranean Sea 20. Partition of Bengal

The policy regarding engagement of casual workers reviewed by government as per the judgment of Supreme Court delivered on attend personally the due amount to the officials forwarded by service money order to the concerned officials The above action is a. Correct b. Not correct

Description : The policy regarding engagement of casual workers reviewed by government as per the judgment of Supreme Court delivered on attend personally the due amount to the officials forwarded by service money order to the concerned officials The above action is a. Correct b. Not correct

Last Answer : a. Correct

Marks and Spencer wants to learn about consumer attitudes toward mail order purchases and conducts a study to acquire this information, this study would best be classified as collecting _________data. A)casual B)experimental C)primary D)secondary

Description : Marks and Spencer wants to learn about consumer attitudes toward mail order purchases and conducts a study to acquire this information, this study would best be classified as collecting _________data. A)casual B)experimental C)primary D)secondary

Last Answer : C)primary

Casual leave need not be recorded in a) Absentee statement b) In service book c) Service rolls d) All the above

Description : Casual leave need not be recorded in a) Absentee statement b) In service book c) Service rolls d) All the above

Last Answer : d) All the above

In _________, machines and equipments are arranged in the order or sequence in which they are to be used for manufacturing the product A. Factory Layout. B. Product Layout. C. Process Layout. D. Combined Layout.

Description : In _________, machines and equipments are arranged in the order or sequence in which they are to be used for manufacturing the product A. Factory Layout. B. Product Layout. C. Process Layout. D. Combined Layout.

Last Answer : B. Product Layout.

Is a unique feature of the Earth's environment that aerospace engineers needed to imitate on a spacecraft in order to make manned spaceflight possible?

Description : Is a unique feature of the Earth's environment that aerospace engineers needed to imitate on a spacecraft in order to make manned spaceflight possible?

Last Answer : Need answer

Principle of similitude forms the basis of (A) Comparing two identical equipments (B) Designing models so that the result can be converted to prototypes (C) Comparing similarity between design and actual equipment (D) Hydraulic designs

Description : Principle of similitude forms the basis of (A) Comparing two identical equipments (B) Designing models so that the result can be converted to prototypes (C) Comparing similarity between design and actual equipment (D) Hydraulic designs

Last Answer : Answer: Option B

If a contractor proposes to increase concrete cover beyond contractual specification (i.e. 40mm to 70mm), shall engineers accept the proposal?

Description : If a contractor proposes to increase concrete cover beyond contractual specification (i.e. 40mm to 70mm), shall engineers accept the proposal?

Last Answer : In contractual aspect, based on the requirement of General Specification of Civil Engineering Works (1992 Edition), the tolerance of concrete cover is between + ... larger cover. Therefore, with an increase of concrete cover, the crack width will increase which is undesirable.

If on­site slump test fails, should engineers allow the contractor to continue the concreting works?

Description : If on­site slump test fails, should engineers allow the contractor to continue the concreting works?

Last Answer : This is a very classical question raised by many graduate engineers. In fact, there are two schools of thought regarding this issue. The first school of thought is rather straightforward: the contractor ... t the Engineer exercise his power to stop the contractor and save these extra time and cost?

Under what situation should engineers use pot bearings instead of elastomeric bearings?

Description : Under what situation should engineers use pot bearings instead of elastomeric bearings?

Last Answer : In the event of high vertical loads combined with large angle of rotations, rubber bearings are undesirable when compared with pot bearings. For instance, elastomeric ... bearings are better alternatives than elastomeric bearings in such an scenario as suggested by David J. Lee.

Under what situation shall engineers use jacking at one end only and from both ends in prestressing work?

Description : Under what situation shall engineers use jacking at one end only and from both ends in prestressing work?

Last Answer : During prestressing operation at one end, frictional losses will occur and the prestressing force decreases along the length of tendon until reaching the other end. These frictional losses include the ... if the total span length is sufficiently long, jacking from both ends should be considered.

Boston society of Civil Engineer's formula Q = 0.0056 × (D/t) in cumecs/square km is based upon (A) Rainfall and drainage area(B) Total run off and drainage area (C) Drainage area and its shape (D) Drainage area

Description : Boston society of Civil Engineer's formula Q = 0.0056 × (D/t) in cumecs/square km is based upon (A) Rainfall and drainage area (B) Total run off and drainage area (C) Drainage area and its shape (D) Drainage area

Last Answer : Answer: Option B

The width of pavement in addition to a gravelled berm 1 m on either side for a two directional traffic recommended by Nagpur Conference of Chief Engineers, is (A) 4.7 m (B) 5.7 m (C) 6.7 m (D) 7.7 m

Description : The width of pavement in addition to a gravelled berm 1 m on either side for a two directional traffic recommended by Nagpur Conference of Chief Engineers, is (A) 4.7 m (B) 5.7 m (C) 6.7 m (D) 7.7 m

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) Steel produced by open hearth process is milder than that obtained by the Bessemer process (B) Engineers prefer open hearth steel for structural purpose as it is more homogenous (C) Basic Bessemer process is suitable for converting poor ore containing a large proportion of sulphur and phosphorus into steel

Description : Pick up the correct statement from the following: (A) Steel produced by open hearth process is milder than that obtained by the Bessemer process (B) Engineers prefer open hearth steel ... is suitable for converting poor ore containing a large proportion of sulphur and phosphorus into steel

Last Answer : Answer: Option D

What do civil engineers do?

Description : What do civil engineers do?

Last Answer : Civil engineering focuses on structures that serve the public such as transportation systems, water treatment, government buildings, public facilities such as airports and train stations, ... , materials engineering, structural engineering, construction engineering, and water resource engineering.  

If the area calculated form the plan plotted with measurements by an erroneous chain, accurate area of the plan is (A) Measured area × (Length of chain used/Nominal chain length) (B) Measured area × (Nominal chain length/ Length of chain used) (C) Measured area × (Nominal chain length/ Length of chain used)² (D) Measured area × (Length of chain used/Nominal chain length)²

Description : If the area calculated form the plan plotted with measurements by an erroneous chain, accurate  area of the plan is  (A) Measured area (Length of chain used/Nominal chain length)  (B) Measured ... of chain used)²  (D) Measured area (Length of chain used/Nominal chain length)² 

Last Answer : (D) Measured area × (Length of chain used/Nominal chain length)² 

If a linear traverse follows a sharp curve round a large lake where it is difficult to have long legs, the accuracy of the traverse may be improved by (A) Taking short legs (B) Making repeated observations of angular and linear measurements (C) Making a subsidiary traverse to determine the length of a long leg (D) All the above

Description : If a linear traverse follows a sharp curve round a large lake where it is difficult to have long legs,  the accuracy of the traverse may be improved by  (A) Taking short legs  (B) Making ... (C) Making a subsidiary traverse to determine the length of a long leg  (D) All the above 

Last Answer : (C) Making a subsidiary traverse to determine the length of a long leg 

If the angular measurements of a traverse are more precise than its linear measurements, balancing of the traverse, is done by (A) Bowditch's rule (B) Transit rule (C) Empirical rule (D) All of the above

Description : If the angular measurements of a traverse are more precise than its linear measurements,  balancing of the traverse, is done by  (A) Bowditch's rule  (B) Transit rule  (C) Empirical rule  (D) All of the above 

Last Answer : (B) Transit rule 

Greater accuracy in linear measurements, is obtained by (A) Tacheometry (B) Direct chaining (C) Direct taping (D) All the above

Description : Greater accuracy in linear measurements, is obtained by (A) Tacheometry (B) Direct chaining (C) Direct taping (D) All the above

Last Answer : (C) Direct taping

In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per 30 metre tape duly corrected for temperature, slope and sag, the angular error of closure not to exceed (where n is the number of traverse legs) (A) 50" n(B) 30" n(C) 60" n (D) None of these

Description : In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per ... legs) (A) 50" n (B) 30" n (C) 60" n (D) None of these

Last Answer : (A) 50" n

Prolongation of chain line across an obstruction in chain surveying, is done by (A) Making angular measurements (B) Drawing perpendiculars with a chain (C) Solution of triangles (D) All the above

Description : Prolongation of chain line across an obstruction in chain surveying, is done by (A) Making angular measurements (B) Drawing perpendiculars with a chain (C) Solution of triangles (D) All the above

Last Answer : (B) Drawing perpendiculars with a chain

Pick up the correct statement from the following: (A) The framework which consists of a series of connected lines, the lengths and directions of which are found from measurements, is called a traverse (B) The system of a series of lines which forms a circuit which ends at the starting point, is called a closed traverse (C) The traverse that starts from a point already fixed in some survey system and ends on another such point, is called a controlled traverse (D) All the above

Description : Pick up the correct statement from the following: (A) The framework which consists of a series of connected lines, the lengths and directions of which are found from measurements, is called a traverse ... system and ends on another such point, is called a controlled traverse (D) All the above

Last Answer : (D) All the above

For a closed traverse the omitted measurements may be calculated (A) Length of one side only (B) Bearing of one side only (C) Both length and bearing of one side (D) All the above

Description : For a closed traverse the omitted measurements may be calculated (A) Length of one side only (B) Bearing of one side only (C) Both length and bearing of one side (D) All the above

Last Answer : (D) All the above

Setting out a curve by two theodolite method, involves (A) Linear measurements only (B) Angular measurements only (C) Both linear and angular measurements (D) None of these

Description : Setting out a curve by two theodolite method, involves (A) Linear measurements only (B) Angular measurements only (C) Both linear and angular measurements (D) None of these

Last Answer : (B) Angular measurements only

Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made vertically downwards from a horizontal plane (C) The horizontal plane with reference to which staff readings are taken, coincides with the level surface through the telescope axis (D) All the above

Description : Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made ... readings are taken, coincides with the level surface through the telescope axis (D) All the above

Last Answer : (D) All the above

Transit rule of adjusting the consecutive coordinates of a traverse is used where (A) Linear and angular measurements of the traverse are of equal accuracy (B) Angular measurements are more accurate than linear measurements (C) Linear measurements are more accurate than angular measurements (D) All of the above

Description : Transit rule of adjusting the consecutive coordinates of a traverse is used where (A) Linear and angular measurements of the traverse are of equal accuracy (B) Angular measurements are more accurate ... (C) Linear measurements are more accurate than angular measurements (D) All of the above

Last Answer : (B) Angular measurements are more accurate than linear measurements

In chain surveying field work is limited to (A) Linear measurements only (B) Angular measurements only (C) Both linear and angular measurements (D) All the above

Description : In chain surveying field work is limited to (A) Linear measurements only (B) Angular measurements only (C) Both linear and angular measurements (D) All the above

Last Answer : (A) Linear measurements only

Angles to a given pivot station observed from a number of traverse stations when plotted, the lines to the pivot station intersect at a common point (A) Angular measurements are correct and not the linear measurements (B) Linear measurements are correct and not the angular measurements (C) Angular and linear measurements are correct and not the plotting of traverse (D) Angular and linear measurements and also plotting of the traverse are correct

Description : Angles to a given pivot station observed from a number of traverse stations when plotted, the lines to the pivot station intersect at a common point (A) Angular measurements are correct and ... plotting of traverse (D) Angular and linear measurements and also plotting of the traverse are correct

Last Answer : (D) Angular and linear measurements and also plotting of the traverse are correct

Due to perturbation of the orbit, satellite orbit parameters are frequently updated on measurements carried out by its (A) Six ground stations (B) Five ground stations (C) Four ground stations (D) Three ground stations

Description : Due to perturbation of the orbit, satellite orbit parameters are frequently updated on measurements carried out by its (A) Six ground stations (B) Five ground stations (C) Four ground stations (D) Three ground stations

Last Answer : Answer: Option B