If the area calculated form the plan plotted with measurements by an erroneous chain, accurate area of the plan is (A) Measured area × (Length of chain used/Nominal chain length) (B) Measured area × (Nominal chain length/ Length of chain used) (C) Measured area × (Nominal chain length/ Length of chain used)² (D) Measured area × (Length of chain used/Nominal chain length)²

If the area calculated form the plan plotted with measurements by an erroneous chain, accurate 

area of the plan is 

(A) Measured area × (Length of chain used/Nominal chain length) 

(B) Measured area × (Nominal chain length/ Length of chain used) 

(C) Measured area × (Nominal chain length/ Length of chain used)² 

(D) Measured area × (Length of chain used/Nominal chain length)² 


by

1 Answer

Answer :

(D) Measured area × (Length of chain used/Nominal chain length)² 


by

Related questions

The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Description : The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Last Answer : (A) Chain surveying

Which one of the following mistakes/errors may be cumulative + or - : (A) Bad ranging (B) Bad straightening (C) Erroneous length of chain (D) Sag

Description : Which one of the following mistakes/errors may be cumulative + or - :  (A) Bad ranging  (B) Bad straightening  (C) Erroneous length of chain  (D) Sag

Last Answer : (C) Erroneous length of chain

Correct distance obtained by an erroneous chain is: (A) (Erroneous chain length/Correct chain length) × Observed distance (B) (Correct chain length/Erroneous chain length) × Observed distance (C) (Correct chain length/Observed distance) × Erroneous chain length (D) None of these

Description : Correct distance obtained by an erroneous chain is: (A) (Erroneous chain length/Correct chain length) × Observed distance (B) (Correct chain length/Erroneous chain length) × Observed distance (C) (Correct chain length/Observed distance) × Erroneous chain length (D) None of these

Last Answer : (A) (Erroneous chain length/Correct chain length) × Observed distance

Angles to a given pivot station observed from a number of traverse stations when plotted, the lines to the pivot station intersect at a common point (A) Angular measurements are correct and not the linear measurements (B) Linear measurements are correct and not the angular measurements (C) Angular and linear measurements are correct and not the plotting of traverse (D) Angular and linear measurements and also plotting of the traverse are correct

Description : Angles to a given pivot station observed from a number of traverse stations when plotted, the lines to the pivot station intersect at a common point (A) Angular measurements are correct and ... plotting of traverse (D) Angular and linear measurements and also plotting of the traverse are correct

Last Answer : (D) Angular and linear measurements and also plotting of the traverse are correct

For a closed traverse the omitted measurements may be calculated (A) Length of one side only (B) Bearing of one side only (C) Both length and bearing of one side (D) All the above

Description : For a closed traverse the omitted measurements may be calculated (A) Length of one side only (B) Bearing of one side only (C) Both length and bearing of one side (D) All the above

Last Answer : (D) All the above

The area of any irregular figure of the plotted map is measured with (A) Pentagraph (B) Sextant (C) Clinometer (D) Planimeter

Description : The area of any irregular figure of the plotted map is measured with (A) Pentagraph (B) Sextant (C) Clinometer (D) Planimeter

Last Answer : (D) Planimeter

When troubleshooting electronic equipment, you should use a high impedance multimeter ________________. A. to prevent excess current flow through the meter that would damage it B. for AC measurements only and a low resistance meter for DC measurements C. whenever a low impedance meter is not available, regardless of the components being tested D. so as not to load down the circuit and obtain erroneous voltage readings

Description : When troubleshooting electronic equipment, you should use a high impedance multimeter ________________. A. to prevent excess current flow through the meter that would damage it B. for AC measurements only ... being tested D. so as not to load down the circuit and obtain erroneous voltage readings

Last Answer : Answer: D

The actual density of a rock is 1.53 g/ml. You measured and calculated the density as 1.62 g/ml. How accurate was your answer?

Description : The actual density of a rock is 1.53 g/ml. You measured and calculated the density as 1.62 g/ml. How accurate was your answer?

Last Answer : (1.62 – 1.53)/1.53 * 100 = 5.89%

In open channels, the specific energy is the (A) Total energy per unit discharge (B) Total energy measured with respect to the datum passing through the bottom of the channel (C) Total energy measured above the horizontal datum (D) Kinetic energy plotted above the free surface of water

Description : In open channels, the specific energy is the (A) Total energy per unit discharge (B) Total energy measured with respect to the datum passing through the bottom of the channel (C) Total energy measured above the horizontal datum (D) Kinetic energy plotted above the free surface of water

Last Answer : Answer: Option B

Transit rule of adjusting the consecutive coordinates of a traverse is used where (A) Linear and angular measurements of the traverse are of equal accuracy (B) Angular measurements are more accurate than linear measurements (C) Linear measurements are more accurate than angular measurements (D) All of the above

Description : Transit rule of adjusting the consecutive coordinates of a traverse is used where (A) Linear and angular measurements of the traverse are of equal accuracy (B) Angular measurements are more accurate ... (C) Linear measurements are more accurate than angular measurements (D) All of the above

Last Answer : (B) Angular measurements are more accurate than linear measurements

A simply supported uniform rectangular bar breadth b, depth d and length L carries an isolated load W at its mid-span. The same bar experiences an extension e under same tensile load. The ratio of the maximum deflection to the elongation, is (A) L/d (B) L/2d (C) (L/2d)² (D) (L/3d)²

Description : A simply supported uniform rectangular bar breadth b, depth d and length L carries an isolated  load W at its mid-span. The same bar experiences an extension e under same tensile load. The  ratio of the maximum deflection to the ... (A) L/d (B) L/2d (C) (L/2d)² (D) (L/3d)²

Last Answer : (C) (L/2d)

If N is the algebraic difference of grades, S is the minimum sight distance in metres, the length (L) of a summit curve is (A) NS/4 (B) NS²/4 (C) N²S/4(D) (NS)²/4

Description : If N is the algebraic difference of grades, S is the minimum sight distance in metres, the length (L) of a summit curve is (A) NS/4 (B) NS²/4 (C) N²S/4 (D) (NS)²/4

Last Answer : Answer: Option B

If W is total load per unit area on a panel, D is the diameter of the column head, L is the span in two directions, then the sum of the maximum positive bending moment and average of the negative bending moment for the design of the span of a square flat slab, should not be less than (A) WL/12 (L - 2D/3)² (B) WL/10 (L + 2D/3)² (C) WL/10 (L - 2D/3)² (D) WL/12 (L - D/3)²

Description : If W is total load per unit area on a panel, D is the diameter of the column head, L is the span in two directions, then the sum of the maximum positive bending moment and average of the negative bending moment for the design of the span ... (L + 2D/3)² (C) WL/10 (L - 2D/3)² (D) WL/12 (L - D/3)²

Last Answer : Answer: Option C

If l1 and l2 are the lengths of long and short spans of a two way slab simply supported on four edges and carrying a load w per unit area, the ratio of the loads split into w1 and w2acting on strips parallel to l2 and l1 is (A) w1/w2 = l2/l1 (B) w1/w2 = (l2/l1)² (C) w1/w2 = (l2/l1)3 (D) w1/w2 = (l2/l1)

Description : If l1 and l2 are the lengths of long and short spans of a two way slab simply supported on four edges and carrying a load w per unit area, the ratio of the loads split into w1 and w2acting on strips parallel to l2 and l1 is (A) ... l1 (B) w1/w2 = (l2/l1)² (C) w1/w2 = (l2/l1)3 (D) w1/w2 = (l2/l1)

Last Answer : Answer: Option D

The cross-section of a road partly in banking and partly in cutting is shown in the given figure. The area of the shaded portion is (A) b - rd)²/(r - s) (B) b - rd)²/(r + s) (C) ½ × (b + rd)²/(r - s) (D) b - rd)²/(s - r)

Description : The cross-section of a road partly in banking and partly in cutting is shown in the given figure. The area of the shaded portion is (A) b - rd)²/(r - s) (B) b - rd)²/(r + s) (C) ½ × (b + rd)²/(r - s) (D) b - rd)²/(s - r)

Last Answer : (A) b - rd)²/(r - s)

The area of the cross-section of a road fully in banking shown in the given figure, is (A) [sb² + r² (2bd + sd)²]/(r² - s²) (B) [sb² + r² (2bd + sd)²]/(r² - s5 ) (C) [sb² + r² (2bd + sd)²]/(r - s) (D) None of these

Description : The area of the cross-section of a road fully in banking shown in the given figure, is (A) [sb² + r² (2bd + sd)²]/(r² - s²) (B) [sb² + r² (2bd + sd)²]/(r² - s5 ) (C) [sb² + r² (2bd + sd)²]/(r - s) (D) None of these

Last Answer : (A) [sb² + r² (2bd + sd)²]/(r² - s²)

When National Income is calculated with reference to a base year, it is called: A. Nominal National Income B. Net National Income C. Real National Income D. Gross National Income

Description : When National Income is calculated with reference to a base year, it is called: A. Nominal National Income B. Net National Income C. Real National Income D. Gross National Income

Last Answer : C. Real National Income

Pick up the correct statement from the following: (A) All pipes and fittings are classified according to their diameters (B) The diameter of the pipes is the nominal diameter of internal bore (C) All pipes are measured along the centre line of the pipes in metres (D) All the above

Description : Pick up the correct statement from the following: (A) All pipes and fittings are classified according to their diameters (B) The diameter of the pipes is the nominal diameter of internal bore (C) All pipes are measured along the centre line of the pipes in metres (D) All the above

Last Answer : (D) All the above

Prolongation of chain line across an obstruction in chain surveying, is done by (A) Making angular measurements (B) Drawing perpendiculars with a chain (C) Solution of triangles (D) All the above

Description : Prolongation of chain line across an obstruction in chain surveying, is done by (A) Making angular measurements (B) Drawing perpendiculars with a chain (C) Solution of triangles (D) All the above

Last Answer : (B) Drawing perpendiculars with a chain

In chain surveying field work is limited to (A) Linear measurements only (B) Angular measurements only (C) Both linear and angular measurements (D) All the above

Description : In chain surveying field work is limited to (A) Linear measurements only (B) Angular measurements only (C) Both linear and angular measurements (D) All the above

Last Answer : (A) Linear measurements only

What is the simplest way to get accurate measurements for stairs and guardrail?

Description : What is the simplest way to get accurate measurements for stairs and guardrail?

Last Answer : A Square is the quickest way…

To assess circulating oxygen levels the 2001 Kidney Disease Outcomes Quality Initiative: Management of Anemia Guidelines recommends the use of which of the following diagnostic tests? a) Hemoglobin Although hematocrit has always been the blood test of choice to assess for anemia, the 2001 Kidney Disease Outcomes Quality Initiative: Management of Anemia Guidelines, recommend that anemia be quantified using hemoglobin rather than hematocrit measurements, as it is more accurate in assessment of circulating oxygen.

Description : To assess circulating oxygen levels the 2001 Kidney Disease Outcomes Quality Initiative: Management of Anemia Guidelines recommends the use of which of the following diagnostic tests? a) Hemoglobin ... gases Arterial blood gases assess the adequacy of oxygenation, ventilation, and acid-base status.

Last Answer : a) Hemoglobin Although hematocrit has always been the blood test of choice to assess for anemia, the 2001 Kidney Disease Outcomes Quality Initiative: Management of Anemia Guidelines, recommend that ... rather than hematocrit measurements, as it is more accurate in assessment of circulating oxygen.

A dc bridge widely used for the accurate measurements of resistance

Description : A dc bridge widely used for the accurate measurements of resistance

Last Answer : Wheatstone bridge

Pick up the correct statement from the following: (A) The apparent error on reversal is twice the actual error (B) The correction may be made equal to half the observed discrepancy (C) The good results may be obtained from a defective instrument by reversing and taking the mean of two erroneous results (D) All the above

Description : Pick up the correct statement from the following: (A) The apparent error on reversal is twice the actual error (B) The correction may be made equal to half the observed discrepancy (C) The ... a defective instrument by reversing and taking the mean of two erroneous results (D) All the above

Last Answer : (D) All the above

The method of reversal (A) Is usually directed to examine whether a certain part is truly parallel or perpendicular to another (B) Makes the erroneous relationship between parts evident (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : The method of reversal (A) Is usually directed to examine whether a certain part is truly parallel or perpendicular to another (B) Makes the erroneous relationship between parts evident (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : (C) Both (a) and (b

For the same draw down in two observations wells at distances r1 and r2, the times after start of pumping are t1 and t2 hours respectively. The relation which holds good is (A) t2 = r2/r1 × t1 (B) t2 = (r2/r1)² × t1 (C) t2 = (r2/r1)3 × t1 (D) t2 = (r2/r1) × t1 2

Description : For the same draw down in two observations wells at distances r1 and r2, the times after start of  pumping are t1 and t2 hours respectively. The relation which holds good is  (A) t2 = r2/r1 × t1 (B) t2 = (r2/r1)² × t1 (C) t2 = (r2/r1)3  × t1 (D) t2 = (r2/r1) × t1 2

Last Answer : (B) t2 = (r2/r1)² × t1

For calculating the permissible stress 0 y /[(1 + a(l/r)²]is the empirical formula, known as (A) Straight line formula (B) Parabolic formula (C) Perry's formula (D) Rankine's formula

Description : For calculating the permissible stress 0 y /[(1 + a(l/r)²]is the empirical formula, known as  (A) Straight line formula  (B) Parabolic formula  (C) Perry's formula  (D) Rankine's formula 

Last Answer : (D) Rankine's formula 

For calculating the allowable stress of long columns 0 y/n [1 - a (1/r)²]is the empirical formula, known as (A) Straight line formula (B) Parabolic formula (C) Perry's formula (D) Rankine's formula

Description : For calculating the allowable stress of long columns 0 y/n [1 - a (1/r)²]is the empirical formula,  known as  (A) Straight line formula  (B) Parabolic formula  (C) Perry's formula  (D) Rankine's formula 

Last Answer : (B) Parabolic formula 

The coefficient of curvature is defined (A) D60/D10 (B) D10/D60 (C) D30 ²/D60 D10 (D) D10 ²/ D30 D60

Description : The coefficient of curvature is defined (A) D60/D10 (B) D10/D60 (C) D30 ²/D60 D10 (D) D10 ²/ D30 D60

Last Answer : (C) D30 ²/D60 D10

According to Rankine's formula, the minimum depth of foundation (A) h = (P/W) [(1 - sin )/(1 + sin )]² (B) h = (w/P) [(1 - sin )/(1 + sin )]² (C) h = (P/w) [(1 - sin )/(1 + tan )]² (D) h = (P/w) [(1 - tan )/(1 + tan )]²

Description : According to Rankine's formula, the minimum depth of foundation (A) h = (P/W) [(1 - sin )/(1 + sin )]² (B) h = (w/P) [(1 - sin )/(1 + sin )]² (C) h = (P/w) [(1 - sin )/(1 + tan )]² (D) h = (P/w) [(1 - tan )/(1 + tan )]²

Last Answer : Answer: Option A

Long and short spans of a two way slab are ly and lx and load on the slab acting on strips parallel to lx and ly be wx and wy respectively. According to Rankine Grashoff theory (A) (wx /wy ) = (ly /lx ) (B) (wx/wy) = (ly/lx)² (C) (wx /wy ) = (ly /lx )4 (D) None of these

Description : Long and short spans of a two way slab are ly and lx and load on the slab acting on strips parallel to lx and ly be wx and wy respectively. According to Rankine Grashoff theory (A) (wx /wy ) = (ly /lx ) (B) (wx/wy) = (ly/lx)² (C) (wx /wy ) = (ly /lx )4 (D) None of these

Last Answer : Answer: Option C

If is the net upward pressure on a square footing of side for a square column of side , the maximum bending moment is given by (A) B.M = pb (c - a)/4 (B) B.M = pb (b - a)²/4 (C) B.M = pb (b - a)²/8 (D) B.M = pb (b + a)/8

Description : If is the net upward pressure on a square footing of side for a square column of side , the maximum bending moment is given by (A) B.M = pb (c - a)/4 (B) B.M = pb (b - a)²/4 (C) B.M = pb (b - a)²/8 (D) B.M = pb (b + a)/8

Last Answer : Answer: Option C

If S is the potential infiltration, P is rainfall in cm in a drainage of a soil with fair pasture cover, the direct run off Q in cm is given by (A) Q = (P - 0.1 S)²/(P + 0.4 S) (B) Q = (P - 0.2 S)²/(P + 0.6 S) (C) Q = (P - 0.2 S)²/(P + 0.8 S) (D) Q = (P - 0.2 S)²/(P + 0.2 S)

Description : If S is the potential infiltration, P is rainfall in cm in a drainage of a soil with fair pasture cover, the direct run off Q in cm is given by (A) Q = (P - 0.1 S)²/(P + 0.4 S) (B) Q = (P - 0.2 S)²/(P + 0.6 S) (C) Q = (P - 0.2 S)²/(P + 0.8 S) (D) Q = (P - 0.2 S)²/(P + 0.2 S)

Last Answer : Answer: Option C

If V is the design speed in km/hour and R is the radius of the curve of a hill road, the super￾elevation (A) e = V / 127 R (B) e = V² / 127 R (C) e = V ²/ 225 R (D) e = V / 225 R

Description : If V is the design speed in km/hour and R is the radius of the curve of a hill road, the super￾elevation (A) e = V / 127 R (B) e = V² / 127 R (C) e = V ²/ 225 R (D) e = V / 225 R

Last Answer : Answer: Option C

According to Rankine's formula, minimum depth of foundations, is (A) (P/w) × [(1 + sin )/(1 - )]² (B) (P/w) × [(1 - sin )/(1 + )]² (C) (P/2w) × [(1 - sin )/(1 + )]² (D) (P/w) × [(1 + sin )/(1 - )]

Description : According to Rankine's formula, minimum depth of foundations, is (A) (P/w) × [(1 + sin )/(1 - )]² (B) (P/w) × [(1 - sin )/(1 + )]² (C) (P/2w) × [(1 - sin )/(1 + )]² (D) (P/w) × [(1 + sin )/(1 - )]

Last Answer : Answer: Option B

If a linear traverse follows a sharp curve round a large lake where it is difficult to have long legs, the accuracy of the traverse may be improved by (A) Taking short legs (B) Making repeated observations of angular and linear measurements (C) Making a subsidiary traverse to determine the length of a long leg (D) All the above

Description : If a linear traverse follows a sharp curve round a large lake where it is difficult to have long legs,  the accuracy of the traverse may be improved by  (A) Taking short legs  (B) Making ... (C) Making a subsidiary traverse to determine the length of a long leg  (D) All the above 

Last Answer : (C) Making a subsidiary traverse to determine the length of a long leg 

If the maximum shear stress at the end of a simply supported R.C.C. beam of 16 m effective span is 10 kg/cm2 , the length of the beam having nominal reinforcement, is (A) 8 cm (B) 6 m (C) 8 m (D) 10 m

Description : If the maximum shear stress at the end of a simply supported R.C.C. beam of 16 m effective span is 10 kg/cm2 , the length of the beam having nominal reinforcement, is (A) 8 cm (B) 6 m (C) 8 m (D) 10 m

Last Answer : Answer: Option C

While surveying a plot of land by plane tabling, the field observations (A) And plotting proceed simultaneously (B) And plotting do not proceed simultaneously (C) And recorded in field books to be plotted later (D) All the above

Description : While surveying a plot of land by plane tabling, the field observations (A) And plotting proceed simultaneously (B) And plotting do not proceed simultaneously (C) And recorded in field books to be plotted later (D) All the above

Last Answer : (A) And plotting proceed simultaneously

Pick up the correct statement from the following: (A) Hydrograph is a plot of discharge and time (B) In hydrographs, time is plotted on X-axis (C) The maximum flow in the river due to rainfall, is called peak flow (D) All the above

Description : Pick up the correct statement from the following: (A) Hydrograph is a plot of discharge and time (B) In hydrographs, time is plotted on X-axis (C) The maximum flow in the river due to rainfall, is called peak flow (D) All the above

Last Answer : Answer: Option D

A CPM family includes (A) CPA (Critical Path Analysis) (B) CPP (Critical Path Plotted) (C) MCE (Minimum Cost Expenditure) (D) All the above

Description : A CPM family includes (A) CPA (Critical Path Analysis) (B) CPP (Critical Path Plotted) (C) MCE (Minimum Cost Expenditure) (D) All the above

Last Answer : (D) All the above

In a plane-table survey, the process of determining the plotted position of a station occupied by the plane-table by means of sights taken towards known points, the locations of which have already been plotted, is known as (a) Radiation (b) Resection (c) Intersection (d) Traversing

Description : In a plane-table survey, the process of determining the plotted position of a station occupied by the plane-table by means of sights taken towards known points, the locations of which have already been plotted, is known as (a) Radiation (b) Resection (c) Intersection (d) Traversing

Last Answer : (b) Resection

The cell mass can be measured optically by determining the amount of light scattered by a suspension of cells. The measurements are usually at a wavelength of A.300-400nm B.400-500nmC.500-600nm D.600-700nm

Description : The cell mass can be measured optically by determining the amount of light scattered by a suspension of cells. The measurements are usually at a wavelength of A.300-400nm B.400-500nm C.500-600nm D.600-700nm

Last Answer : D.600-700nm

Radar surface-angular measurements are referenced to true north and measured in what plane?

Description : Radar surface-angular measurements are referenced to true north and measured in what plane?

Last Answer : Horizontal plane.

How is Nominal GDP is measured in?

Description : How is Nominal GDP is measured in?

Last Answer : Need answer

The ratio of foreign rates to domestic rates measured in the 'same' currency is known as:a) Real exchange rateb) Nominal exchange ratec) Superfluous exchange rated) None of the above

Description : The ratio of foreign rates to domestic rates measured in the 'same' currency is known as: a) Real exchange rate b) Nominal exchange rate c) Superfluous exchange rate d) None of the above

Last Answer : a) Real exchange rate

Most of the outcome/dependent variable characteristics and attributes measured on educational characteristics probably exist at the ______________ level of measurement. a. Nominal b. Ordinal c. Interval d. Ratio

Description : Most of the outcome/dependent variable characteristics and attributes measured on educational characteristics probably exist at the ______________ level of measurement. a. Nominal b. Ordinal c. Interval d. Ratio

Last Answer : b. Ordinal

Nominal GDP is A. The total value of goods and services net of exports B. The total value of goods and services produced during periods of low unemployment C. The total value of goods and services measured at current prices D. The total value of goods and services produced at full employment.

Description : Nominal GDP is A. The total value of goods and services net of exports B. The total value of goods and services produced during periods of low unemployment C. The total value of goods and services measured at current prices D. The total value of goods and services produced at full employment.

Last Answer : C. The total value of goods and services measured at current prices

Nominal GDP is measured in ………………..prices (a) Base year ; (b) Current year ; (c) 1980 ; (d) 2000

Description : Nominal GDP is measured in ………………..prices (a) Base year ; (b) Current year ; (c) 1980 ; (d) 2000

Last Answer : (b) Current year ;

Nominal GDP is (a) The total value of goods and services net of exports (b) The total value of goods and services produced during periods of low unemployment (c) The total value of goods and services measured at current prices (d) The total value of goods and services produced at full employment.

Description : Nominal GDP is (a) The total value of goods and services net of exports (b) The total value of goods and services produced during periods of low unemployment (c) The total value of goods and services measured at current prices (d) The total value of goods and services produced at full employment.

Last Answer : (c) The total value of goods and services measured at current prices

The length of line measured by 20 m chain was found to be 751 m. The chain was tested before start of measurement and was found correct. The chain was again tested after measurement and was found 6 cm too short. What shall be the correct length of line ?

Description : The length of line measured by 20 m chain was found to be 751 m. The chain was tested before start of measurement and was found correct. The chain was again tested after measurement and was found 6 cm too short. What shall be the correct length of line ?

Last Answer : Given Data: Standard length of chain (L)= 20m Measured Length (M.L.) = 751 m Error before start of measurement = 0.0 Error after measurement = 6 cm = 0.06 m To Find: Actual length or Correct length Solution: ... (L'/L)  = (751) x (19.97/20)  = 749.87 Correct length of line is 749.87 m