In India, are prefabricated components costlier than those of traditional cast-in-situ items that the prefabricated components replace? (A) Yes, because of heavier overheads and handling cost (B) Yes, because of the very high order of quality control for the factory made components (C) No, because of repetitive manufacture of a number of elements (D) No, because of savings in site labour

In India, are prefabricated components costlier than those of traditional cast-in-situ items that the
prefabricated components replace?
(A) Yes, because of heavier overheads and handling cost
(B) Yes, because of the very high order of quality control for the factory made components
(C) No, because of repetitive manufacture of a number of elements
(D) No, because of savings in site labour
by

1 Answer

Answer :

(C) No, because of repetitive manufacture of a number of elements
by

Related questions

. A batch reactor suffers from following disadvantage. (A) Poor product quality control (B) High labour and handling cost (C) High shutdown time requirement for emptying, cleaning and refilling (D) All (A), (B) and (C)

Description : . A batch reactor suffers from following disadvantage. (A) Poor product quality control (B) High labour and handling cost (C) High shutdown time requirement for emptying, cleaning and refilling (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

As compared to gravity dams, earthen dams (A) Are costlier (B) Are less susceptible to failure (C) Require sound rock foundations (D) Require less skilled labour

Description : As compared to gravity dams, earthen dams (A) Are costlier (B) Are less susceptible to failure (C) Require sound rock foundations (D) Require less skilled labour

Last Answer : Answer: Option D

Conversion cost is the sum total of: A. Direct material cost and direct wages cost B. Direct wages, direct expenses and factory overheads C. Indirect wages and factory overheads D. Indirect wages, direct wages & factory overheads

Description : Conversion cost is the sum total of: A. Direct material cost and direct wages cost B. Direct wages, direct expenses and factory overheads C. Indirect wages and factory overheads D. Indirect wages, direct wages & factory overheads

Last Answer : C. Indirect wages and factory overheads

Which of the following statements is/are correct? 1. A materials requisition note is used to record the issue of direct material to a specific job. 2. A typical job cost will contain actual costs for material, labour and production overheads, and non –production overheads are often added as a percentage of total production cost 3. The job costing method can be applied in costing batches (a) (1) only (b) (1) and (2) only (c) (1) and (3) only (d) (2) and (3) only

Description : Which of the following statements is/are correct? 1. A materials requisition note is used to record the issue of direct material to a specific job. 2. A typical job cost will contain actual costs for material, labour and production ... 1) and (2) only (c) (1) and (3) only (d) (2) and (3) only

Last Answer : (c) (1) and (3) only

(d) Rs 1.50 Q.61. CA Co manufactures a single product and has drawn up the following flexed budget for the year. 60% 70% 80% Rs Rs Rs Direct materials 120,000 140,000 160,000 Direct labour 90,000 105,000 120,000 Production overheads 54,000 58,000 62,000 Other overheads 40,000 40,000 40,000 Total Cost 304,000 343,000 382,000 What would be the total cost in a budget that is prepared at the 77% level of activity? (a) Rs 330,300 (b) Rs 370,300 (c) Rs 373,300 (d) Rs 377,300

Description : Q.61. CA Co manufactures a single product and has drawn up the following flexed budget for the year.  60% 70% 80%  Rs Rs Rs Direct materials 120,000 140,000 160,000 Direct labour 90,000 105,000 120,000 Production ... activity? (a) Rs 330,300 (b) Rs 370,300 (c) Rs 373,300 (d) Rs 377,300

Last Answer : (b) Rs 370,300

During September, 300 labour hours were worked for a total cost of Rs 4800. The variable overhead expenditure variance was Rs 600 (A). Overheads are assumed to be related to direct labour hours of active working. What was the standard cost per labour hour? (a) Rs 14 (b) Rs 16.50 (c) Rs 17.50

Description : During September, 300 labour hours were worked for a total cost of Rs 4800. The variable  overhead expenditure variance was Rs 600 (A). Overheads are assumed to be related to direct labour  hours of active working. What was the standard cost per labour hour? (a) Rs 14 (b) Rs 16.50 (c) Rs 17.50

Last Answer : (a) Rs 14

Calculate the prime cost from the following information: Direct material purchased: Rs. 1,00,000 Direct material consumed: Rs. 90,000 Direct labour: Rs. 60,000 Direct expenses: Rs. 20,000 Manufacturing overheads: Rs. 30,000 (a) Rs. 1,80,000 (b) Rs. 2,00,000 (c) Rs. 1,70,000 (d) Rs. 2,10,000

Description : Calculate the prime cost from the following information: Direct material purchased: Rs. 1,00,000 Direct material consumed: Rs. 90,000 Direct labour: Rs. 60,000 Direct expenses: Rs. 20,000 Manufacturing overheads: Rs. 30,000 (a) Rs. 1,80,000 (b) Rs. 2,00,000 (c) Rs. 1,70,000 (d) Rs. 2,10,000

Last Answer : (c) Rs. 1,70,000

Marginal cost is computed as A. Prime cost + All Variable overheads B. Direct material + Direct labour + Direct Expenses + All variable overheads C. Total costs – All fixed overheads D. All of the above

Description : Marginal cost is computed as A. Prime cost + All Variable overheads B. Direct material + Direct labour + Direct Expenses + All variable overheads C. Total costs – All fixed overheads D. All of the above

Last Answer : A. Prime cost + All Variable overheads

Process B had no opening inventory. 13,500 units of raw material were transferred in at Rs 4.50 per unit. Additional material at Rs1.25per unit was added in process. Labour and overheads were Rs 6.25 per completed unit and Rs 2.50 per unit incomplete. If 11,750completed units were transferred out, what was the closing inventory in Process B? (a) Rs. 6562.50 (b) Rs. 12,250.00 (c) Rs. 14,437.50 (d) Rs. 25,375.00

Description : Process B had no opening inventory. 13,500 units of raw material were transferred in at Rs 4.50  per unit. Additional material at Rs1.25per unit was added in process. Labour and overheads were Rs 6.25  per completed unit and Rs ... 6562.50 (b) Rs. 12,250.00 (c) Rs. 14,437.50 (d) Rs. 25,375.00

Last Answer : (a) Rs 142,485

In element-wise classification of overheads, which one of the following is not included — (a) Fixed overheads (b) Indirect labour (c) Indirect materials (d) Indirect expenditure.

Description : In element-wise classification of overheads, which one of the following is not included — (a) Fixed overheads (b) Indirect labour (c) Indirect materials (d) Indirect expenditure.

Last Answer : (a) Fixed overheads

Explain the procedure of the storage, transportation and erection of prefabricated building elements.

Description : Explain the procedure of the storage, transportation and erection of prefabricated building elements. 

Last Answer : Storage of pre-fabricated building elements: 1) Procurement storage of Unloading raw materials 2) Testing of raw materials 3) Design of concrete mix 4) Fabrication of reinforcement cages 5) ... differs with risk condition, hence skilled foremen, and workers to be employed on the job.

Which of the following statements refer to correct purpose as regards testing of concrete by ultrasonic pulse velocity method? 1. To assess the quality of concrete in-situ. 2. To determine the dynamic modulus of elasticity of concrete. 3. To locate the presence of cracks in it (a) 1 and 2 only (b) 1 and 3 only (c) 2 and 3 only (d)1, 2 and 3

Description : Which of the following statements refer to correct purpose as regards testing of concrete by ultrasonic pulse velocity method? 1. To assess the quality of concrete in-situ. 2. To determine the dynamic modulus of elasticity of concrete. 3 ... and 2 only (b) 1 and 3 only (c) 2 and 3 only (d)1, 2 and 3

Last Answer : (d)1, 2 and 3

Pick up the correct statement from the following: (A) Air bubbles in casting produce a dull sound by tapping their surfaces lightly with a hammer (B) Cupola furnace is used for the manufacture of cast iron (C) Red short iron is of no value for welding purpose (D) All the above

Description : Pick up the correct statement from the following: (A) Air bubbles in casting produce a dull sound by tapping their surfaces lightly with a hammer (B) Cupola furnace is used for the manufacture of cast iron (C) Red short iron is of no value for welding purpose (D) All the above

Last Answer : Answer: Option D

Why is induced draught considered better than the forced draught? a) Because power requirement is high for forced draught b) Maintenance of induced draught fan is costlier c) Forced draught is less efficient d) Forced draught produces less amount of speed of air

Description : Why is induced draught considered better than the forced draught? a) Because power requirement is high for forced draught b) Maintenance of induced draught fan is costlier c) Forced draught is less efficient d) Forced draught produces less amount of speed of air

Last Answer : Because power requirement is high for forced draught

One aim of e-procurement is to increase savings by bulk buying of items: *  of the right quantity  from the right source.  of the right quality.  at the right price.

Description : One aim of e-procurement is to increase savings by bulk buying of items: *  of the right quantity  from the right source.  of the right quality.  at the right price.

Last Answer :  of the right quantity

One aim of e-procurement is to increase savings by bulk buying of items: A. of the right quantity. B. from the right source. C. of the right quality. D. at the right priceE. None of the above. Ans: A

Description : One aim of e-procurement is to increase savings by bulk buying of items: A. of the right quantity. B. from the right source. C. of the right quality. D. at the right priceE. None of the above. Ans: A

Last Answer : A. of the right quantity

By bulk buying of items, One aim of e-procurement is to increase savings A.right quantity. B.right thing. C.right quality. D.right price. Answer: A

Description : By bulk buying of items, One aim of e-procurement is to increase savings A.right quantity. B.right thing. C.right quality. D.right price. Answer: A

Last Answer : A.right quantity.

Calculate cost of sales from the following: Net Works cost: Rs. 2,00,000 Office & Administration Overheads: Rs. 1,00,000 Opening stock of WIP: Rs. 10,000 Closing Stock of WIP: Rs. 20,000 Closing stock of finished goods: Rs. 30,000 There was no opening stock of finished goods. Selling overheads: Rs. 10,000 (a) Rs. 2,70,000 (b) Rs. 2,80,000 (c) Rs. 3,00,000 (d) Rs. 3,20,000

Description : Calculate cost of sales from the following: Net Works cost: Rs. 2,00,000 Office & Administration Overheads: Rs. 1,00,000 Opening stock of WIP: Rs. 10,000 Closing Stock of WIP: Rs. 20,000 Closing stock of finished goods: Rs. ... Rs. 2,70,000 (b) Rs. 2,80,000 (c) Rs. 3,00,000 (d) Rs. 3,20,000

Last Answer : (b) Rs. 2,80,000

Site order book is used for recording (A) Instructions by the executive engineers (B) Construction measurements (C) Issue of store equipments (D) Names of the casual labour

Description : Site order book is used for recording (A) Instructions by the executive engineers (B) Construction measurements (C) Issue of store equipments (D) Names of the casual labour

Last Answer : (A) Instructions by the executive engineers

A manufacture undertakes to supply 2000 pieces of a particular component at Rs.25 per piece. According to his estimates, even if 5% fail to pass the quality tests, then he will make a profit of 25%. However as it turned out, 50% of the components were rejected. What is the loss to the manufacture? [TCS recruitment exam question] A. Rs 12,000 B. Rs 13,000 C. Rs 14,000 D. Rs 15,000 E. None f these

Description : A manufacture undertakes to supply 2000 pieces of a particular component at Rs.25 per piece. According to his estimates, even if 5% fail to pass the quality tests, then he will make a profit of 25%. However as it turned out, ... A. Rs 12,000 B. Rs 13,000 C. Rs 14,000 D. Rs 15,000 E. None f these

Last Answer : Answer - B. Rs 13,000 Explanation: 5% of 2000=100 so 2000-100=1900 so,if he sells 1900 he will get 25% profit cost per piece rs 25 so 25x 1900 don't solve here if 125% . ... /125=38000=CP if 50% rejected,only 1000 pieces sold so 1000 25=25000=SP loss=cp-sp= 38000-25000=13000

Reciprocating pumps (A) Are not suitable for variable heads (B) Are four times costlier than centrifugal pumps (C) Are not suitable for pumping water containing sediments (D) Single stroke produce pulsating flow

Description : Reciprocating pumps  (A) Are not suitable for variable heads  (B) Are four times costlier than centrifugal pumps  (C) Are not suitable for pumping water containing sediments  (D) Single stroke produce pulsating flow 

Last Answer : (A) Are not suitable for variable heads 

Assertion A : Normally turpentine oil is recommended as thinner for indoor painting. Reason R : Turpentine oil is costlier than other thinners. Select your answer according to the coding system given below: (A) Both A and R is true and R is the correct explanation of A (B) Both A and R is true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A : Normally turpentine oil is recommended as thinner for indoor painting. Reason R : Turpentine oil is costlier than other thinners. Select your answer according to the coding system given below: (A) Both A and R is ... of A (C) A is true but R is false (D) A is false but R is true

Last Answer : Answer: Option B

Bessemer process is used for the manufacture of (A) Pig iron (B) Cast iron (C) Wrought iron D) Steel

Description : Bessemer process is used for the manufacture of (A) Pig iron (B) Cast iron (C) Wrought iron D) Steel

Last Answer : Answer: Option D

The steel used for the manufacture of rails, is (A) Bessemer steel (B) Mild steel (C) Cast steel (D) Stainless steel

Description : The steel used for the manufacture of rails, is (A) Bessemer steel (B) Mild steel (C) Cast steel (D) Stainless steel

Last Answer : Answer: Option A

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber, Kel-F and Teflon (B) Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon

A company calculates the prices of jobs by adding overheads to the prime cost and adding 30% to total costs as a profit margin. Job number Y256 was sold for Rs1690 and incurred overheads of Rs 694. What was the prime cost of the job? (a) Rs 489 (b) Rs 606 (c) Rs 996 (d) Rs 1300

Description : A company calculates the prices of jobs by adding overheads to the prime cost and adding 30% to  total costs as a profit margin. Job number Y256 was sold for Rs1690 and incurred overheads of Rs 694.  What was the prime cost of the job? (a) Rs 489 (b) Rs 606 (c) Rs 996 (d) Rs 1300

Last Answer : (b) Rs 606

Consider the following features/factors: 1. Projects are of the non-repetitive type 2. Time required need not be known 3. Time required is known precisely 4. Events have been established for planning 5. Emphasis is given to activities of project PERT is preferred for planning because of (A) 1, 2 and 4 (B) 3, 4 and 5 (C) 1, 3 and 4 (D) 1, 2 and 5

Description : Consider the following features/factors: 1. Projects are of the non-repetitive type 2. Time required need not be known 3. Time required is known precisely 4. Events have been established for planning 5. Emphasis is given to ... and 4 (B) 3, 4 and 5 (C) 1, 3 and 4 (D) 1, 2 and 5

Last Answer : (A) 1, 2 and 4

The calorie requirement is higher in the rural areas because (a) They do not enjoy as much as people in the urban areas (b) Food items are expensive (c) They are engaged in mental work (d) People are engaged in physical labour

Description : The calorie requirement is higher in the rural areas because (a) They do not enjoy as much as people in the urban areas (b) Food items are expensive (c) They are engaged in mental work (d) People are engaged in physical labour

Last Answer : (d) People are engaged in physical labour

Mobilization advance up to 10% of the cost of work is given to a contractor (A) On commencement of work at site for payment of loan taken by him (B) For the purchase of construction materials (C) For the payment of advances to labour and other staff (D) For all activities required to start the work at site on finalization of the contract document

Description : Mobilization advance up to 10% of the cost of work is given to a contractor (A) On commencement of work at site for payment of loan taken by him (B) For the purchase of construction ... staff (D) For all activities required to start the work at site on finalization of the contract document

Last Answer : (D) For all activities required to start the work at site on finalization of the contract document

In the Capstone® simulation, what are the components of a product’s material cost? a. Cost of Inventory on hand and the cost to store it b. Reliability component cost and positioning component cost c. The costs associated with inventory, shipping and handling d. Level of automation and product reliability e. None of the above

Description : In the Capstone® simulation, what are the components of a product's material cost? a. Cost of Inventory on hand and the cost to store it b. Reliability component cost and positioning component ... , shipping and handling d. Level of automation and product reliability e. None of the above

Last Answer : b. Reliability component cost and positioning component cost

Internal costs include a) Developers salaries b) Managers and support personnel salaries c) The cost of overheads such as utilities, rent and senior managers d) Materials (such as manuals) and services such as travel e) All of the above.

Description : Internal costs include a) Developers salaries b) Managers and support personnel salaries c) The cost of overheads such as utilities, rent and senior  managers d) Materials (such as manuals) and services such as travel e) All of the above.

Last Answer : a) Developers salaries

In Project crashing, rent and overheads are treated as A.Significant Cost B.Insignificant costs C.Direct Costs D.Indirect Costs

Description : In Project crashing, rent and overheads are treated as  A.Significant Cost  B.Insignificant costs  C.Direct Costs  D.Indirect Costs

Last Answer : D.Indirect Costs

Which of the following is not a relevant cost in capital budgeting? A. Sunk Cost B. Opportunity cost C. Allocated overheads D. Both (a) and (c) above

Description : Which of the following is not a relevant cost in capital budgeting? A. Sunk Cost B. Opportunity cost C. Allocated overheads D. Both (a) and (c) above

Last Answer : D. Both (a) and (c) above

Manufacturing cost in a chemical company does not include the (A) Fixed charges (B) Plant overheads (C) Direct products cost (D) Administrative expenses

Description : Manufacturing cost in a chemical company does not include the (A) Fixed charges (B) Plant overheads (C) Direct products cost (D) Administrative expenses

Last Answer : (D) Administrative expenses

The items of fixed cost are: a. Depreciation and labour b. insurance and repair c. Taxes and fuels d. Interest and housing

Description : The items of fixed cost are: a. Depreciation and labour b. insurance and repair c. Taxes and fuels d. Interest and housing

Last Answer : d. Interest and housing

Have you heard the prefabricated steel structure building?

Description : Have you heard the prefabricated steel structure building?

Last Answer : Our life? Are we married?

What is the lifespan of a prefabricated house?

Description : How many years can a block of flats with normal modifications last? 300 years?

Last Answer : if there were no design and implementation errors, certainly 100, easily even 150 300 years will require major repairs, but technically and economically realistic it is

If you have a requirement to buy a large commercially available prefabricated wash rack?

Description : If you have a requirement to buy a large commercially available prefabricated wash rack?

Last Answer : Need answer

What prefabricated decks work well on a slope?

Description : What prefabricated decks work well on a slope?

Last Answer : A Mechanical type prefabricated decks work well on a slope. For more information of the product, you can also visit this site http://www.deckhouse.com/.

Which of the following is NOT a porous absorber? A. Prefabricated tiles B. Plasters and spray on materials C. Acoustic blankets D. Membrane absorber

Description : Which of the following is NOT a porous absorber? A. Prefabricated tiles B. Plasters and spray on materials C. Acoustic blankets D. Membrane absorber

Last Answer : D. Membrane absorber

Principal alloying elements of cast tool alloys which have very high wear resistance & high temperature strength are (A) Cobalt, chromium & tungsten (B) Cobalt, chromium & nickel (C) Molybdenum, tungsten & chromium (D) Cobalt, zirconium & molybdenum

Description : Principal alloying elements of cast tool alloys which have very high wear resistance & high temperature strength are (A) Cobalt, chromium & tungsten (B) Cobalt, chromium & nickel (C) Molybdenum, tungsten & chromium (D) Cobalt, zirconium & molybdenum

Last Answer : : Option A

In the Contact process of sulphuric acid manufacture, 98% acid cooler is made of (A) Stainless steel (B) Cast iron (C) Lead lined steel (D) Rubber lined steel

Description : In the Contact process of sulphuric acid manufacture, 98% acid cooler is made of (A) Stainless steel (B) Cast iron (C) Lead lined steel (D) Rubber lined steel

Last Answer : (B) Cast iron

In the Kraft (sulphate) process for the paper manufacture, the digestor is made of (A) Cast iron (B) Stainless steel (C) Karbate carbon (D) Wrought iron

Description : In the Kraft (sulphate) process for the paper manufacture, the digestor is made of (A) Cast iron (B) Stainless steel (C) Karbate carbon (D) Wrought iron

Last Answer : (B) Stainless steel

One litre of cold air weighs heavier than the dry air (1 Litre) because of the (a) Increased number of collisions between the molecules (b) Increased number of molecules at low temperature (c) Greater energy of molecules at high temperature (d) Lower energy of molecules at high temperature

Description : One litre of cold air weighs heavier than the dry air (1 Litre) because of the (a) Increased number of collisions between the molecules (b) Increased number of molecules at low temperature (c) Greater energy of molecules at high temperature (d) Lower energy of molecules at high temperature

Last Answer : Ans:(b)

The demand for labour is called - (1) Market demand (2) Direct demand (3) Derived demand (4) Factory demand

Description : The demand for labour is called - (1) Market demand (2) Direct demand (3) Derived demand (4) Factory demand

Last Answer : (3) Derived demand Explanation: The demand for labour is "derived- from the production and demand for the product being demanded. If the demand for the product increases, either the price will ... price and production numbers are met. Labour is "derived" from the market demand for the product.

The demand for labour is called (1) Market demand (2) Direct demand (3) Derived demand (4) Factory demand

Description : The demand for labour is called (1) Market demand (2) Direct demand (3) Derived demand (4) Factory demand

Last Answer :  Derived demand

Which of the following statements represents the main difference between a relay and a contactor? A. Contactors control current and relays control voltage. B. A relay is series connected and a contactor is parallel connected. C. Contactors can handle heavier loads than relays. D. Contactors are made from silver and relays are made from copper.

Description : Which of the following statements represents the main difference between a relay and a contactor? A. Contactors control current and relays control voltage. B. A relay is series connected and a contactor ... loads than relays. D. Contactors are made from silver and relays are made from copper.

Last Answer : Answer: C