A construction schedule is prepared after collecting (A) Number of operations (B) Output of labour (C) Output of machinery (D) All the above

A construction schedule is prepared after collecting
(A) Number of operations
(B) Output of labour
(C) Output of machinery
(D) All the above
by

1 Answer

Answer :

(D) All the above
by

Related questions

Which of the following is active factor of production ? a. Labour b. Capital c. Machinery d. All of these

Description : Which of the following is active factor of production ? a. Labour b. Capital c. Machinery d. All of these

Last Answer : d. All of these

Consider the following statements: In the bar chart planning 1. Interdependence of the operations cannot be portrayed. 2. Progress of work can be measured. 3. Spare time of the activities can be determined. 4. Schedule cannot be updated. Of these statements (A) 1, 2 and 3 are correct (B) 1 and 4 are correct (C) 2, 3 and 4 are correct (D) 1, 2 and 4 are correct

Description : Consider the following statements: In the bar chart planning 1. Interdependence of the operations cannot be portrayed. 2. Progress of work can be measured. 3. Spare time of the activities can be determined. 4. ... and 4 are correct (C) 2, 3 and 4 are correct (D) 1, 2 and 4 are correct

Last Answer : (B) 1 and 4 are correct

For the construction of water bound macadam roads, the correct sequence of operations after spreading coarse aggregates is (A) Dry rolling, wet rolling, application of screening and application of filler (B) Dry rolling, application of filler, wet rolling and application of screening (C) Dry rolling, application of screening, wet rolling and application of filler (D) Dry rolling, application of screening, application of filler and wet rolling

Description : For the construction of water bound macadam roads, the correct sequence of operations after spreading coarse aggregates is (A) Dry rolling, wet rolling, application of screening and application of ... of filler (D) Dry rolling, application of screening, application of filler and wet rolling

Last Answer : Answer: Option C

Mobilization advance up to 10% of the cost of work is given to a contractor (A) On commencement of work at site for payment of loan taken by him (B) For the purchase of construction materials (C) For the payment of advances to labour and other staff (D) For all activities required to start the work at site on finalization of the contract document

Description : Mobilization advance up to 10% of the cost of work is given to a contractor (A) On commencement of work at site for payment of loan taken by him (B) For the purchase of construction ... staff (D) For all activities required to start the work at site on finalization of the contract document

Last Answer : (D) For all activities required to start the work at site on finalization of the contract document

Site order book is used for recording (A) Instructions by the executive engineers (B) Construction measurements (C) Issue of store equipments (D) Names of the casual labour

Description : Site order book is used for recording (A) Instructions by the executive engineers (B) Construction measurements (C) Issue of store equipments (D) Names of the casual labour

Last Answer : (A) Instructions by the executive engineers

While filling the tender for any work, the contractor considers (A) Site survey (B) Availability of construction materials (C) Availability of labour (D) All the above

Description : While filling the tender for any work, the contractor considers (A) Site survey (B) Availability of construction materials (C) Availability of labour (D) All the above

Last Answer : (D) All the above

During the construction period, price variation clause in contracts caters to (A) Increase in rates of only important materials (B) Variation in cost in materials element, labour element and petrol-oil-lubricant element (C) Variation in total cost of the project on an ad hoc basis (D) Rate of inflation

Description : During the construction period, price variation clause in contracts caters to (A) Increase in rates of only important materials (B) Variation in cost in materials element, labour element and petrol-oil-lubricant ... ) Variation in total cost of the project on an ad hoc basis (D) Rate of inflation

Last Answer : (B) Variation in cost in materials element, labour element and petrol-oil-lubricant element

A contractor wishes to determine a suitable combination of manual labour and machine work for the excavation of a multistory construction. For every cum of excavation, 3 man-hours are needed; or 0.2 machine-hour. Costs involved are Rs. 20 per man-hour and Rs. 500 per machine-hour. The total quantity of excavation is estimated to be 4,000 cum. The optimal quantity of excavation to be done manually for minimum total cost will be (a) 1500 cum (b) 1800 cum (c) 2250 cum (d) 2500 cum

Description : A contractor wishes to determine a suitable combination of manual labour and machine work for the excavation of a multistory construction. For every cum of excavation, 3 man-hours are needed; or 0.2 machine-hour. Costs ... total cost will be (a) 1500 cum (b) 1800 cum (c) 2250 cum (d) 2500 cum

Last Answer : (d) 2500 cum

After deciding to order replacement parts for aging machinery, the buyer for a construction company examines catalogues and trade publications. The buyer is probably at which stage of the organisational buying decision process? A)problem recognition B)product specification C)product-supplier search D)product selection E)product evauation

Description : After deciding to order replacement parts for aging machinery, the buyer for a construction company examines catalogues and trade publications. The buyer is probably at which stage of the ... recognition B)product specification C)product-supplier search D)product selection E)product evauation

Last Answer : C)product-supplier search

After deciding to order replacement parts for aging machinery, the buyer for a construction company examines catalogues and trade publications. The buyer is probably at which stage of the organisational buying decision process? A)problem recognition B)product specification C)product-supplier search D)product selection E)product evauation

Description : After deciding to order replacement parts for aging machinery, the buyer for a construction company examines catalogues and trade publications. The buyer is probably at which stage of the ... recognition B)product specification C)product-supplier search D)product selection E)product evauation

Last Answer : C)product-supplier

After deciding to order replacement parts for ageing machinery, the buyer for a construction company examines catalogues and trade publications. The buyer is probably at which stage of the organisational buying decision process? A)problem recognition B)product specification C)product-supplier search D)product selection E)product evauation

Description : After deciding to order replacement parts for ageing machinery, the buyer for a construction company examines catalogues and trade publications. The buyer is probably at which stage of the ... recognition B)product specification C)product-supplier search D)product selection E)product evauation

Last Answer : C)product-supplier search

Consider the following operations: 1. Drilling 2. Blasting 3. Mucking 4. Placing steel 5. Placing concrete The correct sequence of these operations in tunnel construction is (A) 1, 2, 4, 3, 5 (B) 1, 3, 2, 4, 5 (C) 1, 2, 3, 4, 5 (D) 1, 3, 4, 2,

Description : Consider the following operations: 1. Drilling 2. Blasting 3. Mucking 4. Placing steel 5. Placing concrete The correct sequence of these operations in tunnel construction is (A) 1, 2, 4, 3, 5 (B) 1, 3, 2, 4, 5 (C) 1, 2, 3, 4, 5 (D) 1, 3, 4, 2,

Last Answer : (C) 1, 2, 3, 4, 5

What are rental charges of construction machinery?

Description : What are rental charges of construction machinery?

Last Answer : It depends on the power and size of the construction machinery. It is a fact that you will be spending between $600 and $1500 daily renting one. It will cost something like $2000 to $5000 a week with an excavator rental plan that is paid monthly.

How to Find the Best Construction Machinery?

Description : How to Find the Best Construction Machinery?

Last Answer : The right construction machinery makes life a whole lot easier.Individuals with a passion for construction or companies justgetting off the ground or established groups looking to furthertheir business ... use of pricecomparison websites. By entering in the type of constructionmachinery you want

Who defined investment as "the construction of a new capital asset like machinery or factory building"? (1) Hansen (2) J.M. Keynes (3) Harrod (4) J.R. Hicks

Description : Who defined investment as "the construction of a new capital asset like machinery or factory building"? (1) Hansen (2) J.M. Keynes (3) Harrod (4) J.R. Hicks

Last Answer : (2) J.M. Keynes Explanation: Investment expenditure refers to the creation of new assets i.e. an addition to the stock of existing capital assets. According to Keynes investment demand depends upon ... the rate of interest (IR). Investment demand decreases with the increase in the rate of interest.

Who defined investment as “the construction of a new capital asset like machinery or factory building” ? (1) Hansen (2) J.M. Keynes (3) Harrod (4) J.R. Hicks

Description : Who defined investment as “the construction of a new capital asset like machinery or factory building” ? (1) Hansen (2) J.M. Keynes (3) Harrod (4) J.R. Hicks

Last Answer : J.M. Keynes

(d) Rs 1.50 Q.61. CA Co manufactures a single product and has drawn up the following flexed budget for the year. 60% 70% 80% Rs Rs Rs Direct materials 120,000 140,000 160,000 Direct labour 90,000 105,000 120,000 Production overheads 54,000 58,000 62,000 Other overheads 40,000 40,000 40,000 Total Cost 304,000 343,000 382,000 What would be the total cost in a budget that is prepared at the 77% level of activity? (a) Rs 330,300 (b) Rs 370,300 (c) Rs 373,300 (d) Rs 377,300

Description : Q.61. CA Co manufactures a single product and has drawn up the following flexed budget for the year.  60% 70% 80%  Rs Rs Rs Direct materials 120,000 140,000 160,000 Direct labour 90,000 105,000 120,000 Production ... activity? (a) Rs 330,300 (b) Rs 370,300 (c) Rs 373,300 (d) Rs 377,300

Last Answer : (b) Rs 370,300

The Philippine Accountancy Act of 2004 provides that all Working papers made during an audit shall be the property of the auditor. These working papers shall include the following, except: a. Working papers prepared by the CPA and his staff. b. Analysis and schedule prepared and submitted to the auditor by his client's staff. c. Excerpts or copies of documents furnished to the auditor. d. Any report submitted by the auditor to his client.

Description : The Philippine Accountancy Act of 2004 provides that all Working papers made during an audit shall be the property of the auditor. These working papers shall include the following, except: a. Working ... of documents furnished to the auditor. d. Any report submitted by the auditor to his client.

Last Answer : Any report submitted by the auditor to his client.

The schedule of Void Money Order should be prepared in ---------- a. Single Copy b . Duplicate c. Triplicate

Description : The schedule of Void Money Order should be prepared in ---------- a. Single Copy b . Duplicate c. Triplicate

Last Answer : b . Duplicate

Some organizations have escalator clause in their labour agreements. What does this clause provide for ? (A) Automatic increase in wage/salary depending on seniority (B) Wage increase depending on output per day by the worker (C) Automatic increase in wage/salary depending upon increase in price index (D) Automatic increase in wage/salary depending on increase in profits of the firm

Description : Some organizations have escalator clause in their labour agreements. What does this clause provide for ? (A) Automatic increase in wage/salary depending on seniority (B) Wage increase depending on output ... index (D) Automatic increase in wage/salary depending on increase in profits of the firm

Last Answer : Answer: Automatic increase in wage/salary depending on increase in profits of the firm

CG Co manufactures a single product T. Budgeted production output of product T during June is 200 units. Each unit of product T requires 6 labour hours for completion and CG Co anticipates 20 per cent idle time. Labour is paid at a rate of Rs7 per hour. The direct labour cost budget for March is (a) Rs 6,720 (b) 8,400 (c) 10,080 (d) 10,500

Description : CG Co manufactures a single product T. Budgeted production output of product T during June is  200 units. Each unit of product T requires 6 labour hours for completion and CG Co anticipates 20 per  cent idle time. Labour is paid at ... for March is (a) Rs 6,720 (b) 8,400 (c) 10,080 (d) 10,500

Last Answer : (d) 10,500

The formula used for calculation of labour rate variance is A. Total standard labour cost of actual output - Total actual cost of actual output B. (Standard rate per hour - Actual rate per hour) * Actual Hours C. (Standard time - Actual time) * Standard rate per hour D. Abnormal idle hours * Standard hourly rate

Description : The formula used for calculation of labour rate variance is A. Total standard labour cost of actual output - Total actual cost of actual output B. (Standard rate per hour - Actual rate per hour) ... time - Actual time) * Standard rate per hour D. Abnormal idle hours * Standard hourly rate

Last Answer : B. (Standard rate per hour - Actual rate per hour) * Actual Hours

While selecting the location of an intake for collecting surface water, the factor considered, is (A) The intake point should be near as far as possible to the treatment plant (B) The intake point should be in purer zone of the water source (C) The intake point in meandering rivers should be on concave banks (D) All the above

Description : While selecting the location of an intake for collecting surface water, the factor considered, is (A) The intake point should be near as far as possible to the treatment plant (B) The intake point should ... (C) The intake point in meandering rivers should be on concave banks (D) All the above

Last Answer : (D) All the above

The polythene bottles are used for collecting rain water and. their capacities is (A) 2 litres (B) 4 litres (C) 10 litres (D) All the above

Description : The polythene bottles are used for collecting rain water and. their capacities is (A) 2 litres (B) 4 litres (C) 10 litres (D) All the above

Last Answer : Option D

The process of manufacturing steel by heating short lengths of wrought iron bars mixed with charcoal in fire clay crucibles and collecting the molten iron into moulds, is known as (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Description : The process of manufacturing steel by heating short lengths of wrought iron bars mixed with charcoal in fire clay crucibles and collecting the molten iron into moulds, is known as (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Last Answer : Answer: Option B

Quality also can be looked at in terms of user satisfaction which includes a) A compliant product b) Good quality output c) Delivery within budget and schedule d) All of the mentioned

Description : Quality also can be looked at in terms of user satisfaction which includes a) A compliant product b) Good quality output c) Delivery within budget and schedule d) All of the mentioned

Last Answer : Ans : d

In India, are prefabricated components costlier than those of traditional cast-in-situ items that the prefabricated components replace? (A) Yes, because of heavier overheads and handling cost (B) Yes, because of the very high order of quality control for the factory made components (C) No, because of repetitive manufacture of a number of elements (D) No, because of savings in site labour

Description : In India, are prefabricated components costlier than those of traditional cast-in-situ items that the prefabricated components replace? (A) Yes, because of heavier overheads and handling cost (B) Yes, ... of repetitive manufacture of a number of elements (D) No, because of savings in site labour

Last Answer : (C) No, because of repetitive manufacture of a number of elements

The ALU gives the output of the operations and the output is stored in the ________ a) Memory Devices b) Registers c) Flags d) Output Unit

Description : The ALU gives the output of the operations and the output is stored in the ________ a) Memory Devices b) Registers c) Flags d) Output Unit

Last Answer : Answer: b Explanation: Any output generated by the ALU gets stored in the registers. The registers are the temporary memory locations within the processor that are connected by signal paths to the CPU

The computer performs all mathematical and logical operations inside its _______ A. Visual Display Unit B. Memory Unit C. Output Unit D. Central Processing Unit

Description : The computer performs all mathematical and logical operations inside its _______ A. Visual Display Unit B. Memory Unit C. Output Unit D. Central Processing Unit

Last Answer : D. Central Processing Unit

The main function of the ALU is: a) Store Data and Information for Future Use b) Perform arithmetic and logical operations c) Control Computer Output, such as Printing d) None of These

Description : The main function of the ALU is: a) Store Data and Information for Future Use b) Perform arithmetic and logical operations c) Control Computer Output, such as Printing d) None of These

Last Answer : b) Perform arithmetic and logical operations

The main function of the ALU is to a) perform arithmetic and logical operations b) store data and information for future use c) control computer output, such as printing d) monitor all computer activities e) None of these

Description : The main function of the ALU is to a) perform arithmetic and logical operations b) store data and information for future use c) control computer output, such as printing d) monitor all computer activities e) None of these

Last Answer : a) perform arithmetic and logical operations

The retrieval of information from the computer is defined as 1) collection of data 2) data retrieval operations 3) output 4) data output collection

Description : The retrieval of information from the computer is defined as 1) collection of data 2) data retrieval operations 3) output 4) data output collection

Last Answer : 3) output

Which of the following represents an output from the marketing environment? A)Money borrowed by Liverpool F.C. to help finance its operations B)Nike's television advertising campaign featuring a leading sports personality C)Information on shoppers' attitudes purchased by Debenhams Department Stores D)Steel purchased by Volvo to be used in producing cars

Description : Which of the following represents an output from the marketing environment? A)Money borrowed by Liverpool F.C. to help finance its operations B)Nike's television advertising campaign featuring a ... purchased by Debenhams Department Stores D)Steel purchased by Volvo to be used in producing cars

Last Answer : B)Nike's television advertising campaign featuring a leading sports personality

For constructing a terrazzo floor, Pick up the incorrect statement from the following: (A) A base course is prepared as in cement concrete flooring (B) A 32 mm thick layer of cement concrete (1 : 2 : 4) is laid on the base course and the surface is made smooth by trowelling (C) Glass strips are driven into the layer according to the pattern required (D) After final grinding is over, oxalic acid mixed with water is spread over and rubbed hard with soft material

Description : For constructing a terrazzo floor, Pick up the incorrect statement from the following: (A) A base course is prepared as in cement concrete flooring (B) A 32 mm thick layer of cement concrete ... final grinding is over, oxalic acid mixed with water is spread over and rubbed hard with soft material

Last Answer : Answer: Option B

After fixing the plane table to the tripod, the main operations which are needed at each plane table station are (i) Levelling (ii) Orientation (iii) Centering The correct sequence of these operations is (A) (i), (ii), (iii) (B) (i), (iii), (ii) (C) (iii), (i), (ii) (D) (ii), (iii), (i)

Description : After fixing the plane table to the tripod, the main operations which are needed at each plane table station are (i) Levelling (ii) Orientation (iii) Centering The correct sequence of these operations is (A) (i), (ii), (iii) (B) (i), (iii), (ii) (C) (iii), (i), (ii) (D) (ii), (iii), (i)

Last Answer : (B) (i), (iii), (ii)

The resection by two point problem as compared to three point problem (A) Gives more accurate problem (B) Takes less time (C) Requires more labour (D) None of the above

Description : The resection by two point problem as compared to three point problem (A) Gives more accurate problem (B) Takes less time (C) Requires more labour (D) None of the above

Last Answer : (C) Requires more labour

As compared to gravity dams, earthen dams (A) Are costlier (B) Are less susceptible to failure (C) Require sound rock foundations (D) Require less skilled labour

Description : As compared to gravity dams, earthen dams (A) Are costlier (B) Are less susceptible to failure (C) Require sound rock foundations (D) Require less skilled labour

Last Answer : Answer: Option D

As compared to wall type breakwater, mound type breakwater (A) Requires skilled labour (B) Requires low maintenance cost (C) Requires less material (D) Results in less damage due to gradual failure

Description : As compared to wall type breakwater, mound type breakwater (A) Requires skilled labour (B) Requires low maintenance cost (C) Requires less material (D) Results in less damage due to gradual failure

Last Answer : (D) Results in less damage due to gradual failure

A letter delivered to an addressee can be reposted within the post town for redirection a) After getting redirection feeb) After getting 50% of redirection fee c) After collecting fee equal to postage d) Free of cost

Description : A letter delivered to an addressee can be reposted within the post town for redirection a) After getting redirection feeb) After getting 50% of redirection fee c) After collecting fee equal to postage d) Free of cost

Last Answer : d) Free of cost

A limited company makes a net profit of Rs. 2,00,000 after writing off preliminary expenses amounting to Rs. 20,000 and providing for depreciation on assets amounting to Rs. 40,000 and gain of Rs. 10,000 on sale of a piece of machinery. What are the funds from operation ? (A) Rs. 2,00,000 (B) Rs. 2,40,000 (C) Rs. 2,50,000 (D) Rs. 2,60,000

Description : A limited company makes a net profit of Rs. 2,00,000 after writing off preliminary expenses amounting to Rs. 20,000 and providing for depreciation on assets amounting to Rs. 40,000 and gain of Rs. 10,000 on sale of a piece of ... 2,00,000 (B) Rs. 2,40,000 (C) Rs. 2,50,000 (D) Rs. 2,60,000

Last Answer : Answer: Rs. 2,50,000

The insulation resistance of electric equipment and machinery should be tested for the lowest normal insulation values _____________. A. immediately after shutting down the machine B. every time the brush rigging is adjusted C. immediately after starting up the machine D. every 30 days whether the machine is in use or not

Description : The insulation resistance of electric equipment and machinery should be tested for the lowest normal insulation values _____________. A. immediately after shutting down the machine B. every time the brush rigging is ... starting up the machine D. every 30 days whether the machine is in use or not

Last Answer : Answer: A

The Random errors tend to accumulate proportionally to (A) Numbers of operations involved (B) Reciprocal of operations involved (C) Square root of the number of operation involved (D) Cube root of the number of operation involved

Description : The Random errors tend to accumulate proportionally to (A) Numbers of operations involved (B) Reciprocal of operations involved (C) Square root of the number of operation involved (D) Cube root of the number of operation involved

Last Answer : (C) Square root of the number of operation involved

In the penetration macadam construction, the bitumen is (A) Sprayed after the aggregates are spread and compacted (B) Premixed with aggregates and then spread (C) Sprayed before the aggregates are spread and compacted (D) None of the above

Description : In the penetration macadam construction, the bitumen is (A) Sprayed after the aggregates are spread and compacted (B) Premixed with aggregates and then spread (C) Sprayed before the aggregates are spread and compacted (D) None of the above

Last Answer : Answer: Option A

The construction joints in buildings are provided after (A) 10 m (B) 15 m (C) 20 m (D) 40 m

Description : The construction joints in buildings are provided after (A) 10 m (B) 15 m (C) 20 m (D) 40 m

Last Answer : Answer: Option D

In clay soil (A) Swelling and shrinkage characteristics prevail (B) Consolidation continues even after several years of construction (C) Differential settlement is generally prevalent (D) All the above

Description : In clay soil (A) Swelling and shrinkage characteristics prevail (B) Consolidation continues even after several years of construction (C) Differential settlement is generally prevalent (D) All the above

Last Answer : Answer: Option D

Due to change in price level, a revised estimate is prepared if the sanctioned estimate exceeds (A) 2.0 % (B) 2.5 % (C) 4.0 % (D) 5.0 %

Description : Due to change in price level, a revised estimate is prepared if the sanctioned estimate exceeds (A) 2.0 % (B) 2.5 % (C) 4.0 % (D) 5.0 %

Last Answer : (D) 5.0 %

Pick up the incorrect statement from the following. For performing compressive strength test of cement (A) Cement and standard sand mortar are used in the ratio of 1 : 3 (B) Water is added at the rate of (P/4) + 3.0 percentage of water where P is the percentage of water for standard consistency (C) A cube mould of 10 cm × 10 cm × 10 cm is used (D) The prepared moulds are kept in a atmosphere of 50% relative humidity

Description : Pick up the incorrect statement from the following. For performing compressive strength test of cement (A) Cement and standard sand mortar are used in the ratio of 1 : 3 (B) Water is added at the ... cm 10 cm is used (D) The prepared moulds are kept in a atmosphere of 50% relative humidity

Last Answer : Answer: Option A

The plastics prepared from Vinyl resin are (A) Odourless (B) Non-toxic (C) Transparent (D) All of these

Description : The plastics prepared from Vinyl resin are (A) Odourless (B) Non-toxic (C) Transparent (D) All of these

Last Answer : civil-engineering

Pick up the correct statement from the following: (A) Melamine is obtained from calcium carbide (B) Formaldehyde is prepared synthetically from methane (C) The melamine when reacted with formaldehyde forms the melamine-formaldehyde resin (D) All the above

Description : Pick up the correct statement from the following: (A) Melamine is obtained from calcium carbide (B) Formaldehyde is prepared synthetically from methane (C) The melamine when reacted with formaldehyde forms the melamine-formaldehyde resin (D) All the above

Last Answer : Answer: Option D