Pick up the correct statement from the following: (A) The framework which consists of a series of connected lines, the lengths and directions of which are found from measurements, is called a traverse (B) The system of a series of lines which forms a circuit which ends at the starting point, is called a closed traverse (C) The traverse that starts from a point already fixed in some survey system and ends on another such point, is called a controlled traverse (D) All the above

Pick up the correct statement from the following:
(A) The framework which consists of a series of connected lines, the lengths and directions of
which are found from measurements, is called a traverse
(B) The system of a series of lines which forms a circuit which ends at the starting point, is called
a closed traverse
(C) The traverse that starts from a point already fixed in some survey system and ends on
another such point, is called a controlled traverse
(D) All the above
by

1 Answer

Answer :

(D) All the above
by

Related questions

Angles to a given pivot station observed from a number of traverse stations when plotted, the lines to the pivot station intersect at a common point (A) Angular measurements are correct and not the linear measurements (B) Linear measurements are correct and not the angular measurements (C) Angular and linear measurements are correct and not the plotting of traverse (D) Angular and linear measurements and also plotting of the traverse are correct

Description : Angles to a given pivot station observed from a number of traverse stations when plotted, the lines to the pivot station intersect at a common point (A) Angular measurements are correct and ... plotting of traverse (D) Angular and linear measurements and also plotting of the traverse are correct

Last Answer : (D) Angular and linear measurements and also plotting of the traverse are correct

Pick up the correct statement from the following: (A) The directions of plumb lines suspended at different points in a survey are not strictly parallel (B) In surveys of small extent, the effect of curvature may be ignored and the level surface of the earth is assumed as horizontal (C) In surveys of large extent, the effect of curvature of the earth must be considered (D) All the above

Description : Pick up the correct statement from the following: (A) The directions of plumb lines suspended at different points in a survey are not strictly parallel (B) In surveys of small extent, the effect of ... of large extent, the effect of curvature of the earth must be considered (D) All the above

Last Answer : (D) All the above

For a closed traverse the omitted measurements may be calculated (A) Length of one side only (B) Bearing of one side only (C) Both length and bearing of one side (D) All the above

Description : For a closed traverse the omitted measurements may be calculated (A) Length of one side only (B) Bearing of one side only (C) Both length and bearing of one side (D) All the above

Last Answer : (D) All the above

State the different point to be considered in selection of survey station for a closed traverse

Description : State the different point to be considered in selection of survey station for a closed traverse 

Last Answer : 1) Main survey stations should be inter visible. 2) The main survey lines should form well-conditioned triangles. 3) Each triangle or portion of skeleton must be provided with sufficient check lines. ... ) Survey line must be as few as possible so that the frame work can be plotted conveniently.

Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made vertically downwards from a horizontal plane (C) The horizontal plane with reference to which staff readings are taken, coincides with the level surface through the telescope axis (D) All the above

Description : Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made ... readings are taken, coincides with the level surface through the telescope axis (D) All the above

Last Answer : (D) All the above

In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per 30 metre tape duly corrected for temperature, slope and sag, the angular error of closure not to exceed (where n is the number of traverse legs) (A) 50" n(B) 30" n(C) 60" n (D) None of these

Description : In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per ... legs) (A) 50" n (B) 30" n (C) 60" n (D) None of these

Last Answer : (A) 50" n

If a linear traverse follows a sharp curve round a large lake where it is difficult to have long legs, the accuracy of the traverse may be improved by (A) Taking short legs (B) Making repeated observations of angular and linear measurements (C) Making a subsidiary traverse to determine the length of a long leg (D) All the above

Description : If a linear traverse follows a sharp curve round a large lake where it is difficult to have long legs,  the accuracy of the traverse may be improved by  (A) Taking short legs  (B) Making ... (C) Making a subsidiary traverse to determine the length of a long leg  (D) All the above 

Last Answer : (C) Making a subsidiary traverse to determine the length of a long leg 

If the angular measurements of a traverse are more precise than its linear measurements, balancing of the traverse, is done by (A) Bowditch's rule (B) Transit rule (C) Empirical rule (D) All of the above

Description : If the angular measurements of a traverse are more precise than its linear measurements,  balancing of the traverse, is done by  (A) Bowditch's rule  (B) Transit rule  (C) Empirical rule  (D) All of the above 

Last Answer : (B) Transit rule 

Transit rule of adjusting the consecutive coordinates of a traverse is used where (A) Linear and angular measurements of the traverse are of equal accuracy (B) Angular measurements are more accurate than linear measurements (C) Linear measurements are more accurate than angular measurements (D) All of the above

Description : Transit rule of adjusting the consecutive coordinates of a traverse is used where (A) Linear and angular measurements of the traverse are of equal accuracy (B) Angular measurements are more accurate ... (C) Linear measurements are more accurate than angular measurements (D) All of the above

Last Answer : (B) Angular measurements are more accurate than linear measurements

Pick up the correct statement from the following (A) 1 second of arc corresponds to a displacement ratio of 1:206, 300 (B) 1 degree of arc corresponds to a displacement ratio of 1:57(C) The angular errors tend to propagate themselves along a traverse as the square root of the number of stations (D) All the above

Description : Pick up the correct statement from the following (A) 1 second of arc corresponds to a displacement ratio of 1:206, 300 (B) 1 degree of arc corresponds to a displacement ratio of 1:57 (C) ... to propagate themselves along a traverse as the square root of the number of stations (D) All the above

Last Answer : (D) All the above

The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Description : The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Last Answer : (A) Chain surveying

Which of the following molecules forms lengths of DNA with ‘sticky ends’?

Description : 12 Which of the following molecules forms lengths of DNA with ‘sticky ends’? a) DNA ligase b) DNA polymerase c) RNA polymerase d) Restriction enzyme

Last Answer : ANS: d Restriction enzyme

Pick up the correct statement from the following: (A) The artificial barrier constructed to enclose "n area for safe anchorage, is called break water (B) The smoothened surface at the top end of the vertical face of a guay wall, is called fending (C) The effective berthing lengths of inclined guays can be adjusted (D) All the above

Description : Pick up the correct statement from the following: (A) The artificial barrier constructed to enclose "n area for safe anchorage, is called break water (B) The smoothened surface at the top end of ... fending (C) The effective berthing lengths of inclined guays can be adjusted (D) All the above

Last Answer : (D) All the above

If deflection angles are measured in a closed traverse, the difference between the sum of the right-hand and that of the left hand angles should be equal to (A) 0° (B) 90° (C) 180° (D) 360°

Description : If deflection angles are measured in a closed traverse, the difference between the sum of the right-hand and that of the left hand angles should be equal to (A) 0° (B) 90° (C) 180° (D) 360°

Last Answer : (D) 360°

In a closed traverse, sum of south latitudes exceeds the sum of north latitudes and the sum of east departures exceeds the sum of west departures, then, the closing line will lie in (A) North-west quadrant (B) North-east quadrant (C) South-east quadrant (D) South-west quadrant

Description : In a closed traverse, sum of south latitudes exceeds the sum of north latitudes and the sum of east departures exceeds the sum of west departures, then, the closing line will lie in (A) North-west quadrant (B) North-east quadrant (C) South-east quadrant (D) South-west quadrant

Last Answer : (A) North-west quadrant

The operation of making the algebraic sum of latitudes and departures of a closed traverse, each equal to zero, is known (A) Balancing the sights (B) Balancing the departures (C) Balancing the latitudes (D) Balancing the traverse

Description : The operation of making the algebraic sum of latitudes and departures of a closed traverse, each equal to zero, is known (A) Balancing the sights (B) Balancing the departures (C) Balancing the latitudes (D) Balancing the traverse

Last Answer : (D) Balancing the traverse

If in a closed traverse, the sum of the north latitudes is more than the sum of the south latitudes and also the sum of west departures than the sum of the east departures, the bearing of the closing line is in the (A) NE quadrant (B) SE quadrant (C) NW quadrant(D) SW quadrant

Description : If in a closed traverse, the sum of the north latitudes is more than the sum of the south latitudes and also the sum of west departures than the sum of the east departures, the bearing of the closing line is in the (A) NE quadrant (B) SE quadrant (C) NW quadrant (D) SW quadrant

Last Answer : (B) SE quadrant

Bowditch rule is applied to (A) An open traverse for graphical adjustment (B) A closed traverse for adjustment of closing error (C) Determine the effect of local attraction (D) None of the above

Description : Bowditch rule is applied to (A) An open traverse for graphical adjustment (B) A closed traverse for adjustment of closing error (C) Determine the effect of local attraction (D) None of the above

Last Answer : (B) A closed traverse for adjustment of closing error

Pick up the correct statement from the following: (A) The distance of the eccentric axial load from the C.G. beyond which tension develops, is known as kern distance (B) In visco-elastic material, stress-strain relation is dependent on time (C) An orthotropic material has different properties in three mutually perpendicular directions (D) All the above

Description : Pick up the correct statement from the following: (A) The distance of the eccentric axial load from the C.G. beyond which tension develops, is known as kern distance (B) In visco ... (C) An orthotropic material has different properties in three mutually perpendicular directions (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) The plywoods do not split or crack due to changes in atmosphere (B) The commercial plywoods are available upto 150 cm wide and upto 300 cm long (C) The plywoods possess uniform tensile strength in all directions (D) All the above

Description : Pick up the correct statement from the following: (A) The plywoods do not split or crack due to changes in atmosphere (B) The commercial plywoods are available upto 150 cm wide and upto 300 cm long (C) The plywoods possess uniform tensile strength in all directions (D) All the above

Last Answer : Answer: Option D

A resonant system has a fundamental frequency of 100 Hz. If the next higher frequency that gives a resonance are 300 Hz and 500 Hz, the system could be (a) A pip open at both ends (b) A pipe closed at both ends (c) A string vibrating between two fixed points (d) A pipe open at one end and closed at the other

Description : A resonant system has a fundamental frequency of 100 Hz. If the next higher frequency that gives a resonance are 300 Hz and 500 Hz, the system could be (a) A pip open at both ends (b) A pipe ... (c) A string vibrating between two fixed points (d) A pipe open at one end and closed at the other

Last Answer : Ans:(d)

Pick up the correct statement from the following: (A) Frequency is the number of wave crests passing a fixed point in one second (B) Frequency of a wave is measured in Hertz (Hz) (C) Amplitude of a wave is the height of its crust from the mid-point (D) All of these

Description : Pick up the correct statement from the following: (A) Frequency is the number of wave crests passing a fixed point in one second (B) Frequency of a wave is measured in Hertz (Hz) (C) Amplitude of a wave is the height of its crust from the mid-point (D) All of these

Last Answer : Answer: Option D

what- possible side lengths for a rectangular frame are 6 inches, 10 inches, and 12 inches.If all measurements are whole numbers, which dimensions can be used to frame a picture that has an area between 45 and 50 square inches?

Description : what- possible side lengths for a rectangular frame are 6 inches, 10 inches, and 12 inches.If all measurements are whole numbers, which dimensions can be used to frame a picture that has an area between 45 and 50 square inches?

Last Answer : 6 in. by 8 in., 10 in. by 5 in., 12 in. by 4 in.

what= possible side lengths for a rectangular fence are 8 feet, 10 feet, and 12 feet. Marsha wants to fence in an area between 90 and 130 square feet.If the measurements are whole numbers, what dimensions can Marsha use?

Description : what= possible side lengths for a rectangular fence are 8 feet, 10 feet, and 12 feet. Marsha wants to fence in an area between 90 and 130 square feet.If the measurements are whole numbers, what dimensions can Marsha use?

Last Answer : 8 ft. by 12 ft., 10 ft. by 10 ft., 12 ft. by 10 ft.

Pick up the correct statement from the following: (A) Rain which is intercepted by buildings, vegetations and other objects, is generally known as rainfall interception (B) The difference between the total rainfall and intercepted rainfall, is generally called ground rainfall (C) When rainfall exceeds the interception rainfall, water reaches the ground and infiltration starts (D) All the above

Description : Pick up the correct statement from the following: (A) Rain which is intercepted by buildings, vegetations and other objects, is generally known as rainfall interception (B) The difference between ... the interception rainfall, water reaches the ground and infiltration starts (D) All the above

Last Answer : Answer: Option D

Find condition is true for food web a) A food web only follows just one path c) A food web starts with a consumer b) A food web ends with a producer d) A food web shoes many paths plants and animals connected

Description : Find condition is true for food web a) A food web only follows just one path c) A food web starts with a consumer b) A food web ends with a producer d) A food web shoes many paths plants and animals connected

Last Answer : A food web shoes many paths plants and animals connected

List any four methods of plotting a compass traverse survey & explain any one in brief. Also state the meaning of adjustment of closing error of traverse.

Description : List any four methods of plotting a compass traverse survey & explain any one in brief. Also state the meaning of adjustment of closing error of traverse.

Last Answer : Methods of plotting compass traverse are: 1. By parallel meridian through each station. 2. By included angle. 3. By paper protractor. 4. By rectangular co-ordinates. 5. ... . 5. Finally join new points to get corrected traverse ABCDEA after graphical adjustment of closing error. 

Pick up the correct statement from the following: (A) Mistakes arise from inattention, inexperience or carelessness (B) Systematic errors persist and have regular effects in the survey performances (C) Accidental errors occur inspite of every precaution is taken (D) All the above

Description : Pick up the correct statement from the following: (A) Mistakes arise from inattention, inexperience or carelessness (B) Systematic errors persist and have regular effects in the survey performances (C) Accidental errors occur inspite of every precaution is taken (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) Detailed survey is carried out for a strip of land about 30 m at sharp curves (B) Levels are taken along the trace cut at an interval of 20 m (C) Contour interval is generally adopted at 2 metres vertical interval (D) All the above

Description : Pick up the correct statement from the following: (A) Detailed survey is carried out for a strip of land about 30 m at sharp curves (B) Levels are taken along the trace cut at an interval of 20 m (C) Contour interval is generally adopted at 2 metres vertical interval (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following (A) The contour lines having the same elevation cannot unite and continue as one line (B) A contour can not end abruptly, but must ultimately close itself not necessarily within the limits of map (C) The direction of steepest slope at a point on a contour is at right angles to the contour (D) All the above

Description : Pick up the correct statement from the following (A) The contour lines having the same elevation cannot unite and continue as one line (B) A contour can not end abruptly, but must ultimately close itself not ... slope at a point on a contour is at right angles to the contour (D) All the above

Last Answer : (D) All the above

When 10 cells in series are connected to the ends of a resistance of `59 Omega`, the current is found to be 0.25 A, but when the same cells after bein

Description : When 10 cells in series are connected to the ends of a resistance of `59 Omega`, the current is found to be 0.25 A, but when the same cells after bein

Last Answer : When 10 cells in series are connected to the ends of a resistance of `59 Omega`, the ... Calculate the internal resistance and emf of each cell.

A system which consists of fixed amount of mass and no mass can cross its boundary called _____.  A. Equilibrium system  B. Thermal equilibrium system  C. Open system  D. Closed system

Description : A system which consists of fixed amount of mass and no mass can cross its boundary called _____.  A. Equilibrium system  B. Thermal equilibrium system  C. Open system  D. Closed system

Last Answer : Closed system

Pick up the correct statement from the following: (A) Adding 5% to 6% of moisture content by weight, increases the volume of dry sand from 18% to 38% (B) The bulking of fine sand is more than that of coarse sand (C) If the percentage content of moisture exceeds 10%, increase in bulk of sand starts increasing (D) All the above

Description : Pick up the correct statement from the following: (A) Adding 5% to 6% of moisture content by weight, increases the volume of dry sand from 18% to 38% (B) The bulking of fine sand is ... the percentage content of moisture exceeds 10%, increase in bulk of sand starts increasing (D) All the above

Last Answer : Answer: Option D

A series wound DC motor has its armature and field connected in series with a resistor. When the motor is disconnected from its power supply, this motor will exemplify __________. A. the proper connections for across the line starting B. the proper connections for an automatic strip heater C. a reversing controller circuit D. dynamic braking

Description : A series wound DC motor has its armature and field connected in series with a resistor. When the motor is disconnected from its power supply, this motor will exemplify __________. A. the ... the proper connections for an automatic strip heater C. a reversing controller circuit D. dynamic braking

Last Answer : Answer: D

Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio (above the minimum reflux ratio), the fixed cost of the distillation column first increases and then decreases (C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Description : Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio ( ... (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Last Answer : C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux

Pick up the correct statement from the following: (A) A refracting telescope consists optically of two lenses (B) The principal axes of both the lenses coincide the optical axis of the telescope(C) The lens nearer the object to be viewed is convex and is called objective (D) All the above

Description : Pick up the correct statement from the following: (A) A refracting telescope consists optically of two lenses (B) The principal axes of both the lenses coincide the optical axis of the telescope (C) The lens nearer the object to be viewed is convex and is called objective (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) A harbour without any port complex, is called a refuge harbour (B) A harbour used for fishery, is called fishery harbour (C) The terminal building of a commercial harbour consists of an administrative block, customs clearance and ware-houses (D) All the above

Description : Pick up the correct statement from the following: (A) A harbour without any port complex, is called a refuge harbour (B) A harbour used for fishery, is called fishery harbour (C) The ... commercial harbour consists of an administrative block, customs clearance and ware-houses (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) The substance which consists of one primary chemical, is known as monomer (B) The polymer consists of thousands of monomers joined together (C) The polymer molecule is called macro-molecule (D) All the above

Description : Pick up the correct statement from the following: (A) The substance which consists of one primary chemical, is known as monomer (B) The polymer consists of thousands of monomers joined together (C) The polymer molecule is called macro-molecule (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Sand consists of coarse particles of silica formed due to the disintegration of rocks (B) The grains of sand are not affected by frost (C) Sand beds are permeable and do not allow water to rise up between pores due to capillary action (D) All the above

Description : Pick up the correct statement from the following: (A) Sand consists of coarse particles of silica formed due to the disintegration of rocks (B) The grains of sand are not affected by frost (C) Sand ... and do not allow water to rise up between pores due to capillary action (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement about silt soil from the following: (A) The silt soil has particle size from 0.02 mm to 0.06 mm (B) In organic fine grained silt soil possesses no plasticity (C) The least plastic type normally consists of more or less equidimensional grains of quartz (D) All the above

Description : Pick up the correct statement about silt soil from the following: (A) The silt soil has particle size from 0.02 mm to 0.06 mm (B) In organic fine grained silt soil possesses no ... The least plastic type normally consists of more or less equidimensional grains of quartz (D) All the above

Last Answer : Answer: Option D

Pick up the correct specification of Ramsden eyepiece from the following: (A) It consists of two equal piano convex lenses (B) The curved surfaces of Plano-convex lenses face each other (C) The distance between the diaphragm and the front lens of the eyepiece is kept equal to 1/4 th of the focal length of a lens so that rays from a point on the diaphragm enter the eye as a parallel beam (D) All the above

Description : Pick up the correct specification of Ramsden eyepiece from the following:  (A) It consists of two equal piano convex lenses  (B) The curved surfaces of Plano-convex lenses face each other  (C) ... from a point on the diaphragm enter the eye as a  parallel beam  (D) All the above 

Last Answer : (D) All the above 

What is open traverse and closed traverse?

Description : What is open traverse and closed traverse?

Last Answer : a) Open traverse - 1. When starting point of survey does not coincide with last point of the survey, it is known as open traverse. 2. It is used for the survey roads, rivers coastal line railways ... traverse. 2. It is suitable for the survey of boundaries of ponds, forests, estate, etc.

Define: i) Open Traverse ii) Closed Traverse.

Description : Define: i) Open Traverse ii) Closed Traverse. 

Last Answer : i) Open traverse: When the first and last survey lines does not meets at common point and hence does not form a closed polygon, then it is said to be open traverse.  ii) Closed Traverse: When last and first survey stations meet at common point, traverse is called as closed traverse.

Explain Graphical adjustment of closing error in a closed traverse.

Description : Explain Graphical adjustment of closing error in a closed traverse.  

Last Answer : Step: 1) Draw a horizontal line AA1 equal to the length of perimeter of the traverse to a suitable scale. 2) Mark the distances AB,BC,CD, etc on the line as per their lengths. 3) Draw a perpendicular ... errors 7) Join the the new points which gives the closed traversed. A, B, C, D and A.

Differentiate between open traverse and closed traverse on any two points

Description : Differentiate between open traverse and closed traverse on any two points

Last Answer : Differentiation between Open Traverse and Closed Traverse Closed Traverse Open Traverse When a traverse forms a closed polygon it is called as Closed Traverse   When a traverse does not form a closed polygon it is ... angles = (2n + 4) x 90 There is no such check 

What are the checks applied in case of closed traverse?

Description : What are the checks applied in case of closed traverse?

Last Answer : The errors involved in traverse are of two types: angular and linear. For important traverse angular values are checked by doubling the angles and linear measurements by chain and tape. Check For Angular ... by observation of bearings The fore bearing of the last line should be equal to 180°.