Pick up the correct statement from the following: (A) The eyepiece plays no part in defining the line of sight (B) The diaphragm plays no part in defining the line of sight (C) The optical centre of the objective plays no part in defining the line of sight (D) None of these

Pick up the correct statement from the following:
(A) The eyepiece plays no part in defining the line of sight
(B) The diaphragm plays no part in defining the line of sight
(C) The optical centre of the objective plays no part in defining the line of sight
(D) None of these
by

1 Answer

Answer :

(A) The eyepiece plays no part in defining the line of sight
by

Related questions

Pick up the correct statement from the following: (A) The diaphragm is placed between eyepiece and the objective but nearer to the former (B) The diaphragm is placed between the eyepiece and objective but nearer to the later (C) The outer component of the objective is a double-convex lens of crown glass (D) All the above

Description : Pick up the correct statement from the following: (A) The diaphragm is placed between eyepiece and the objective but nearer to the former (B) The diaphragm is placed between the eyepiece and objective ... outer component of the objective is a double-convex lens of crown glass (D) All the above

Last Answer : (D) All the above

Pick up the correct specification of Ramsden eyepiece from the following: (A) It consists of two equal piano convex lenses (B) The curved surfaces of Plano-convex lenses face each other (C) The distance between the diaphragm and the front lens of the eyepiece is kept equal to 1/4 th of the focal length of a lens so that rays from a point on the diaphragm enter the eye as a parallel beam (D) All the above

Description : Pick up the correct specification of Ramsden eyepiece from the following:  (A) It consists of two equal piano convex lenses  (B) The curved surfaces of Plano-convex lenses face each other  (C) ... from a point on the diaphragm enter the eye as a  parallel beam  (D) All the above 

Last Answer : (D) All the above 

The imaginary line passing through the intersection of cross hairs and the optical centre of the objective, is known as (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Description : The imaginary line passing through the intersection of cross hairs and the optical centre of the objective, is known as (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Last Answer : (B) Line of collimation

Pick up the correct statement from the following: (A) A refracting telescope consists optically of two lenses (B) The principal axes of both the lenses coincide the optical axis of the telescope(C) The lens nearer the object to be viewed is convex and is called objective (D) All the above

Description : Pick up the correct statement from the following: (A) A refracting telescope consists optically of two lenses (B) The principal axes of both the lenses coincide the optical axis of the telescope (C) The lens nearer the object to be viewed is convex and is called objective (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) If the image of the object does not fall on the plane of the cross-lines, parallax exists (B) Parallax has nothing to do with the eyepiece (C) The eyepiece is adjusted for clear vision of the cross hairs (D) All the above

Description : Pick up the correct statement from the following: (A) If the image of the object does not fall on the plane of the cross-lines, parallax exists (B) Parallax has nothing to do with the eyepiece (C) The eyepiece is adjusted for clear vision of the cross hairs (D) All the above

Last Answer : (D) All the above

Which one of the following statements is not correc t? (a) Parallax error is eliminated when there is no change in the staff reading when eye is moved up and down (b) The objective lens is to be focused towards a white or bright background for clear visibility of cross-hairs (c) Temporary adjustments of the dumpy level are to be performed at every set up (d) The eyepiece need not be adjusted after the first set up when the same surveyor is taking readings

Description : Which one of the following statements is not correc t? (a) Parallax error is eliminated when there is no change in the staff reading when eye is moved up and down (b) The objective lens is ... (d) The eyepiece need not be adjusted after the first set up when the same surveyor is taking readings

Last Answer : (b) The objective lens is to be focused towards a white or bright background for clear visibility of cross-hairs

In a theodolite the line passing through the intersection of the horizontal and vertical cross hairs and the optical centre of the object glass and its continuation, is known as (a) Horizontal axis (b) Vertical axis (c) Line of collination (d) Line of sight (e) Either of c or d above*

Description : In a theodolite the line passing through the intersection of the horizontal and vertical cross hairs and the optical centre of the object glass and its continuation, is known as (a) Horizontal axis (b) Vertical axis (c) Line of collination (d) Line of sight (e) Either of c or d above*

Last Answer : e) Either of c or d above*

Cross hairs in surveying telescopes, are fitted (A) In the objective glass (B) At the centre of the telescope (C) At the optical centre of the eye piece (D) In front of the eye piece

Description : Cross hairs in surveying telescopes, are fitted (A) In the objective glass (B) At the centre of the telescope (C) At the optical centre of the eye piece (D) In front of the eye piece

Last Answer : (D) In front of the eye piece

The real image of an object formed by the objective must lie (A) In the plane of cross hairs (B) At the centre of the telescope (C) At the optical centre of the eye-piece (D) Anywhere inside the telescope

Description : The real image of an object formed by the objective must lie (A) In the plane of cross hairs (B) At the centre of the telescope (C) At the optical centre of the eye-piece (D) Anywhere inside the telescope

Last Answer : (A) In the plane of cross hairs

If a light microscope has an eyepiece lens of magnification x15 what magnification of objective lens would be needed to get a total magnification of x1500?

Description : If a light microscope has an eyepiece lens of magnification x15 what magnification of objective lens would be needed to get a total magnification of x1500?

Last Answer : The total magnification is equal to the magnification of theeyepiece multiplied by the magnification of the objective lens.So in this case the objective lens would need to be 100X.

How do you find the total magnification of the eyepiece and the objective lens?

Description : How do you find the total magnification of the eyepiece and the objective lens?

Last Answer : Need answer

To increase the magnifying power of telescope, we should increase (a) The focal length of the objective (b) The focal length of the eyepiece (c) Aperture of the objective (d) Aperture of the eyepiece

Description : To increase the magnifying power of telescope, we should increase (a) The focal length of the objective (b) The focal length of the eyepiece (c) Aperture of the objective (d) Aperture of the eyepiece

Last Answer : Ans:(a)

The magnifying power of an astronomical telescope can be decreased by – (1) decreasing the focal length of the eyepiece (2) increasing the focal length of the eyepiece (3) increasing the focal length of the objective (4) None of these

Description : The magnifying power of an astronomical telescope can be decreased by – (1) decreasing the focal length of the eyepiece (2) increasing the focal length of the eyepiece (3) increasing the focal length of the objective (4) None of these

Last Answer : (2) increasing the focal length of the eyepiece Explanation: The magnifying power (M) of astronomical is given by M = (focal length of objective)/(focal length of eye piece). This ... piece should be small. Similarly, for decreased magnification, focal length of eye piece should be increased.

The magnifying power of an astronomical telescope can be decreased by – (1) decreasing the focal length of the eyepiece (2) increasing the focal length of the eyepiece (3) increasing the focal length of the objective (4) None of these

Description : The magnifying power of an astronomical telescope can be decreased by – (1) decreasing the focal length of the eyepiece (2) increasing the focal length of the eyepiece (3) increasing the focal length of the objective (4) None of these

Last Answer : (2) increasing the focal length of the eyepiece Explanation: The magnifying power (M) of astronomical is given by M = (focal length of objective)/(focal length of eye piece). This ... piece should be small. Similarly, for decreased magnification, focal length of eye piece should be increased.

A student wishes to study the cell structure under a light microscope having 10X eyepiece and 45X objective. He should illuminate the object by which one of the following colours of light so as to get the best possible resolution? (a) Blue (b) Green (c) Yellow (d) Red

Description : A student wishes to study the cell structure under a light microscope having 10X eyepiece and 45X objective. He should illuminate the object by which one of the following colours of light so as to get the best possible resolution? (a) Blue (b) Green (c) Yellow (d) Red

Last Answer : (a) Blue

What is the power of the objective lens of a microscope if an eyepiece of power 10x is used and the total magnification of the object is 40x? (A) 4 (B) 10 (C) 40 (D) 400

Description : What is the power of the objective lens of a microscope if an eyepiece of power 10x is used and the total magnification of the object is 40x? (A) 4 (B) 10 (C) 40 (D) 400

Last Answer : (A) 4

The magnifying power of an astronomical telescope can be decreased by (1) decreasing the focal length of the eyepiece (2) increasing the focal length of the eyepiece (3) increasing the focal length of the objective (4) None of these

Description : The magnifying power of an astronomical telescope can be decreased by (1) decreasing the focal length of the eyepiece (2) increasing the focal length of the eyepiece (3) increasing the focal length of the objective (4) None of these 

Last Answer :  increasing the focal length of the eyepiece

Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made vertically downwards from a horizontal plane (C) The horizontal plane with reference to which staff readings are taken, coincides with the level surface through the telescope axis (D) All the above

Description : Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made ... readings are taken, coincides with the level surface through the telescope axis (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) An observation or the resulting reading with the level on a levelling staff is called sight (B) A back sight is the first sight taken after setting up the instrument in any position (C) The first sight on each change point is a fore sight (D) All the above

Description : Pick up the correct statement from the following: (A) An observation or the resulting reading with the level on a levelling staff is called sight (B) A back sight is the first sight taken after setting up ... position (C) The first sight on each change point is a fore sight (D) All the above

Last Answer : (D) All the above

Diaphragm of a surveying telescope is held inside (A) Eye-piece (B) Objective (C) Telescope tube at its mid point (D) Telescope at the end nearer the eye-piece

Description : Diaphragm of a surveying telescope is held inside  (A) Eye-piece  (B) Objective  (C) Telescope tube at its mid point  (D) Telescope at the end nearer the eye-piece

Last Answer : (D) Telescope at the end nearer the eye-piece

In an internal focusing telescope (A) The objective is at a fixed distance from the diaphragm (B) The focusing is done by the sliding of a divergent lens (C) The focusing divergent lens is situated at about the middle of the tube (D) All the above

Description : In an internal focusing telescope (A) The objective is at a fixed distance from the diaphragm (B) The focusing is done by the sliding of a divergent lens (C) The focusing divergent lens is situated at about the middle of the tube (D) All the above

Last Answer : (D) All the above

0 Pick up the correct statement from the following: (A) The point through which the resultant of the shear stresses passes is known as shear centre(B) In the standard rolled channels, the shear centre is on the horizontal line passing through and away from the C.G. beyond web (C) In equal angles, the shear centre is on the horizontal plane and away from the C.G., outside of the leg projection (D) All the above

Description : 0 Pick up the correct statement from the following: (A) The point through which the resultant of the shear stresses passes is known as shear centre (B) In the standard rolled channels, the shear centre ... horizontal plane and away from the C.G., outside of the leg projection (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) All pipes and fittings are classified according to their diameters (B) The diameter of the pipes is the nominal diameter of internal bore (C) All pipes are measured along the centre line of the pipes in metres (D) All the above

Description : Pick up the correct statement from the following: (A) All pipes and fittings are classified according to their diameters (B) The diameter of the pipes is the nominal diameter of internal bore (C) All pipes are measured along the centre line of the pipes in metres (D) All the above

Last Answer : (D) All the above

Pick up the correct statement regarding the centre line method of estimating a building (A) Product of the centre line of the walls and area of cross-section of any item, gives total quantity of the item (B) The centre line is worked out separately for different sections of walls of a building (C) The centre line length is reduced by half the layer of main wall joining the partition wall (D) All the above

Description : Pick up the correct statement regarding the centre line method of estimating a building (A) Product of the centre line of the walls and area of cross-section of any item, gives total quantity of the ... length is reduced by half the layer of main wall joining the partition wall (D) All the above

Last Answer : (D) All the above

Referring of given figure, pick up the correct statement from the following: (A) The total length of centre line of four walls is 20 m (B) Length of long wall out-to-out is 6.80 m (C) Length of short walls in-to-in is 3.20 m (D) All the above

Description : Referring of given figure, pick up the correct statement from the following: (A) The total length of centre line of four walls is 20 m (B) Length of long wall out-to-out is 6.80 m (C) Length of short walls in-to-in is 3.20 m (D) All the above

Last Answer : (D) All the above

____ is a statement Which derives the role that an organization plays in a society. A. Goals. B. Mission. C. Objective. D. Success.

Description : ____ is a statement Which derives the role that an organization plays in a society. A. Goals. B. Mission. C. Objective. D. Success.

Last Answer : B. Mission.

Method of managing promotion budget by defining objectives, determining tasks to achieve objectives and estimating costs for activities is called A. percentage of sales method B. affordable method C. competitive parity method D. objective and task method

Description : Method of managing promotion budget by defining objectives, determining tasks to achieve objectives and estimating costs for activities is called A. percentage of sales method B. affordable method C. competitive parity method D. objective and task method

Last Answer : D. objective and task method

Pick up the correct statement from the following: (A) For channels, the shear centre does not coincide its centroid (B) The point of intersection of the bending axis with the cross section of the beam, is called shear centre (C) For I sections, the shear centre coincides with the centroid of the cross section of the beam (D) All the above

Description : Pick up the correct statement from the following:  (A) For channels, the shear centre does not coincide its centroid  (B) The point of intersection of the bending axis with the cross section ... shear centre coincides with the centroid of the cross section of the beam  (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) In the earth's magnetic field, a magnetic needle rests in magnetic meridian (B) The angle between the true meridian and the magnetic meridian is called magnetic variation (C) One end of the magnetic needle supported at its centre of gravity tends to dip down towards the nearer magnetic pole of the earth (D) All the above

Description : Pick up the correct statement from the following: (A) In the earth's magnetic field, a magnetic needle rests in magnetic meridian (B) The angle between the true meridian and the magnetic meridian is ... gravity tends to dip down towards the nearer magnetic pole of the earth (D) All the above

Last Answer : (D) All the above

Pick up the correct statement applicable to plate load test (A) Width of the test pit for plate load test is made five times the width of the plate (B) At the centre of the test pit, a hole is dug out whose size is kept equal to the size of the test plate (C) Bottom level of the hole dug at the centre of the test pit, is kept at the level of the actual formation (D) All the above

Description : Pick up the correct statement applicable to plate load test (A) Width of the test pit for plate load test is made five times the width of the plate (B) At the centre of the test pit, a hole is dug ... at the centre of the test pit, is kept at the level of the actual formation (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) A combined footing is so proportioned that centre of gravity of supporting area coincides with centre of gravity of two column loads (B) A combined footing may be either rectangular or trapezoidal in shape (C) Trapezoidal shaped footings may be provided under any loading (D) All the above

Description : Pick up the correct statement from the following: (A) A combined footing is so proportioned that centre of gravity of supporting area coincides with centre of gravity of two column loads (B) A ... in shape (C) Trapezoidal shaped footings may be provided under any loading (D) All the above

Last Answer : Answer: Option D

A clinometer is used for (A) Measuring angle of slope (B) Correcting line of collimation (C) Setting out right angles (D) Defining natural features

Description : A clinometer is used for (A) Measuring angle of slope (B) Correcting line of collimation (C) Setting out right angles (D) Defining natural features

Last Answer : (A) Measuring angle of slope

In a theodolite a condition arising when the image formed by the objective is not in the plane of cross hairs is known as (a) Parallax* (b) Out of sight (c) Out of place (d) Transiting

Description : In a theodolite a condition arising when the image formed by the objective is not in the plane of cross hairs is known as (a) Parallax* (b) Out of sight (c) Out of place (d) Transiting

Last Answer : (a) Parallax*

If f1 and f2 are the distances from the optical centre of a convex lens of focal length to conjugate two points P1 and P2 respectively, the following relationship holds good (A) f = f1 + f2 (B) f = ½ (f1 + f2) (C) 1/f = 1/f1 + 1/f2 (D) None of these

Description : If f1 and f2 are the distances from the optical centre of a convex lens of focal length to conjugate two points P1 and P2 respectively, the following relationship holds good (A) f = f1 + f2 (B) f = ½ (f1 + f2) (C) 1/f = 1/f1 + 1/f2 (D) None of these

Last Answer : (C) 1/f = 1/f1 + 1/f2

Select the correct statement. (a) Expiration occurs due to external intercostal muscles. (b) Intrapulmonary pressure is lower than the atmospheric pressure during inspiration. (c) Inspiration occurs when atmospheric pressure is less than intrapulmonary pressure. (d) Expiration is initiated due to contraction of diaphragm.

Description : Select the correct statement. (a) Expiration occurs due to external intercostal muscles. (b) Intrapulmonary pressure is lower than the atmospheric pressure during inspiration. (c) Inspiration ... less than intrapulmonary pressure. (d) Expiration is initiated due to contraction of diaphragm.

Last Answer : (b) Intrapulmonary pressure is lower than the atmospheric pressure during inspiration.

The intercept of a staff (A) Is maximum if the staff is held truly normal to the line of sight (B) Is minimum if the staff is held truly normal to the line of sight (C) Decreases if the staff is tilted away from normal (D) Increases if the staff is tilted towards normal

Description : The intercept of a staff (A) Is maximum if the staff is held truly normal to the line of sight (B) Is minimum if the staff is held truly normal to the line of sight (C) Decreases if the staff is tilted away from normal (D) Increases if the staff is tilted towards normal

Last Answer : (B) Is minimum if the staff is held truly normal to the line of sight

Two hill tops and 20 km apart are intervened by a third top . If the top most contour of the three hill tops are of the same value, state whether the line of sight AB (A) Passes clear of hill top C (B) Passes below the hill top C(C) Grazes the hill top C(D) None of these

Description : Two hill tops and 20 km apart are intervened by a third top . If the top most contour of the three hill tops are of the same value, state whether the line of sight AB (A) Passes clear of hill top C (B) Passes below the hill top C (C) Grazes the hill top C (D) None of these

Last Answer : (B) Passes below the hill top C

A transit is oriented by setting its vernier A to read the back azimuth of the preceding line. A back sight on the preceding transit station taken and transit is rotated about its vertical axis. The vernier A reads (A) Azimuth of the forward line (B) Bearing of the forward line (C) Back bearing of the forward line (D) Equal to 360°-azimuth of the forward line

Description : A transit is oriented by setting its vernier A to read the back azimuth of the preceding line. A back sight on the preceding transit station taken and transit is rotated about its vertical axis. The vernier ... (C) Back bearing of the forward line (D) Equal to 360°-azimuth of the forward line

Last Answer : (A) Azimuth of the forward line

In an adjusted level, when the bubble is central, the axis of the bubble tube becomes parallel to (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Description : In an adjusted level, when the bubble is central, the axis of the bubble tube becomes parallel to (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Last Answer : (A) Line of sight

When the bubble of the level tube of a level, remains central (A) Line of sight is horizontal (B) Axis of the telescope is horizontal (C) Line of collimation is horizontal (D) Geometrical axis of the telescope is horizontal

Description : When the bubble of the level tube of a level, remains central (A) Line of sight is horizontal (B) Axis of the telescope is horizontal (C) Line of collimation is horizontal (D) Geometrical axis of the telescope is horizontal

Last Answer : (A) Line of sight is horizontal

If the plane table is not horizontal in a direction at right angles to the alidade, the line of sight is parallel to the fiducial edge only for (A) Horizontal sights (B) Inclined sights upward (C) Inclined sight downward (D) None of these

Description : If the plane table is not horizontal in a direction at right angles to the alidade, the line of sight is parallel to the fiducial edge only for (A) Horizontal sights (B) Inclined sights upward (C) Inclined sight downward (D) None of these

Last Answer : (A) Horizontal sights

In levelling operation, (A) The first sight on any change point is a back sight (B) The second sight on any change point is a fore sight (C) The line commences with a fore sight and closes with a back sight (D) The line commences with a back sight and closes with a foresight

Description : In levelling operation, (A) The first sight on any change point is a back sight (B) The second sight on any change point is a fore sight (C) The line commences with a fore sight and closes with a back sight (D) The line commences with a back sight and closes with a foresight

Last Answer : (D) The line commences with a back sight and closes with a foresight

The line of sight is kept as high above ground surface as possible to minimise the error in the observed angles due to (A) Shimmering (B) Horizontal refraction (C) Vertical refraction (D) Both shimmering and horizontal refraction

Description : The line of sight is kept as high above ground surface as possible to minimise the error in the observed angles due to (A) Shimmering (B) Horizontal refraction (C) Vertical refraction (D) Both shimmering and horizontal refraction

Last Answer : (D) Both shimmering and horizontal refraction

Pick up the correct statement from the following regarding the pressure conduits: (A) Pressure conduits are permitted to run ¾th full (B) Pressure conduits are always laid along down grades (C) The hydraulic gradient line always coincides the invert of the conduit (D) None of these

Description : Pick up the correct statement from the following regarding the pressure conduits:  (A) Pressure conduits are permitted to run ¾th full  (B) Pressure conduits are always laid along down grades  ... ) The hydraulic gradient line always coincides the invert of the conduit  (D) None of these

Last Answer : (D) None of these

Pick up the correct statement from the following: (A) A level surface is perpendicular at all points to the direction of gravity (B) A level line lies in level surface (C) A horizontal surface is normal to the direction of gravity at only one point (D) All the above

Description : Pick up the correct statement from the following:  (A) A level surface is perpendicular at all points to the direction of gravity  (B) A level line lies in level surface  (C) A horizontal surface is normal to the direction of gravity at only one point  (D) All the above 

Last Answer : (D) All the above 

Pick up the correct statement from the following (A) The contour lines having the same elevation cannot unite and continue as one line (B) A contour can not end abruptly, but must ultimately close itself not necessarily within the limits of map (C) The direction of steepest slope at a point on a contour is at right angles to the contour (D) All the above

Description : Pick up the correct statement from the following (A) The contour lines having the same elevation cannot unite and continue as one line (B) A contour can not end abruptly, but must ultimately close itself not ... slope at a point on a contour is at right angles to the contour (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) O.M.C. refers to the moisture corresponding to the maximum point on the moisture content dry density curve (B) The line which shows moisture content dry density relation for soil containing a constant percentage of air voids, is known as air void line (C) The free fall of hammer for compaction is 30.5 cm (D) All the above

Description : Pick up the correct statement from the following: (A) O.M.C. refers to the moisture corresponding to the maximum point on the moisture content dry density curve (B) The line which shows moisture content dry ... void line (C) The free fall of hammer for compaction is 30.5 cm (D) All the above

Last Answer : (D) All the above