Pick up the incorrect statement from the following: (A) Dimensions are measured to the nearest 0.01 m (B) Areas are measured to the nearest 0.01 sq.m (C) Cubic contents are measured to the nearest 0.1 cum (D) Weights are measured to the nearest 0.001 tonnes

Pick up the incorrect statement from the following:
(A) Dimensions are measured to the nearest 0.01 m
(B) Areas are measured to the nearest 0.01 sq.m
(C) Cubic contents are measured to the nearest 0.1 cum
(D) Weights are measured to the nearest 0.001 tonnes
by

1 Answer

Answer :

(D) Weights are measured to the nearest 0.001 tonnes
by

Related questions

The void ratio of a soil sample decreases from 1.50 to 1.25 when the pressure is increased from 25 tonnes/m2 to 50 tonnes/m2 , the coefficient of compressibility is (A) 0.01 (B) 0.02 (C) 0.05 (D) 0.001

Description : The void ratio of a soil sample decreases from 1.50 to 1.25 when the pressure is increased from 25 tonnes/m2 to 50 tonnes/m2 , the coefficient of compressibility is (A) 0.01 (B) 0.02 (C) 0.05 (D) 0.001

Last Answer : (A) 0.01

The volume is measured correct to the nearest (A) 0.01 cum (B) 0.02 cum (C) 0.03 cum (D) 0.04 cum

Description : The volume is measured correct to the nearest (A) 0.01 cum (B) 0.02 cum (C) 0.03 cum (D) 0.04 cum

Last Answer : (A) 0.01 cum

While preparing a detailed estimate (A) Dimension should be measured correct to 0.01 m (B) Area should be measured correct to 0.01 sqm (C) Volume should be measured correct to 0.01 cum (D) All the above

Description : While preparing a detailed estimate (A) Dimension should be measured correct to 0.01 m (B) Area should be measured correct to 0.01 sqm (C) Volume should be measured correct to 0.01 cum (D) All the above

Last Answer : (D) All the above

Pick up the incorrect statement from the following: (A) No deduction is made for the volume occupied by reinforcement (B) No deduction is made for the openings upto 0.1 sq.m (C) No deduction is made for volumes occupied by pipes, not exceeding 100 sq.cm in crosssection (D) None of these

Description : Pick up the incorrect statement from the following: (A) No deduction is made for the volume occupied by reinforcement (B) No deduction is made for the openings upto 0.1 sq.m (C) No deduction is made for volumes occupied by pipes, not exceeding 100 sq.cm in crosssection (D) None of these

Last Answer : (D) None of these

Pick up the correct statement from the following: (A) Pointing is measured in sq.m (B) Plastering is measured in sq.m (C) Glazing is measured in sq.m (D) All the above

Description : Pick up the correct statement from the following: (A) Pointing is measured in sq.m (B) Plastering is measured in sq.m (C) Glazing is measured in sq.m (D) All the above

Last Answer : (D) All the above

When a constant discharge 2.91 litres/sec. was obtained in a pumping test, the draw downs in the test wells at 3 m and 6.184 m were 2.6 m and 0.3 m respectively. If over-all depth of the pumping well was 16 m, the permeability of the soil, is (A) 0.0005 cm/sec (B) 0.001 cm/sec (C) 0.002 cm/sec (D) 0.01 cm/sec

Description : When a constant discharge 2.91 litres/sec. was obtained in a pumping test, the draw downs in the test wells at 3 m and 6.184 m were 2.6 m and 0.3 m respectively. If over-all depth of the pumping well was 16 m, the ... (A) 0.0005 cm/sec (B) 0.001 cm/sec (C) 0.002 cm/sec (D) 0.01 cm/sec

Last Answer : Answer: Option B

Pick up the incorrect statement from the following: (A) While measuring a distance with a tape of length 100.005 m, the distance to be increasing by 0.005 m for each tape length (B) An increase in temperature causes a tape to increase in length and the measured distance is too large (C) The straight distance between end points of a suspended tape is reduced by an amount called the sag correction (D) A 100 m tape of cross section 10 mm × 0.25 mm stretches about 10 mm under 5 kg pull

Description : Pick up the incorrect statement from the following: (A) While measuring a distance with a tape of length 100.005 m, the distance to be increasing by 0.005 m for each tape length (B) An increase in ... ) A 100 m tape of cross section 10 mm 0.25 mm stretches about 10 mm under 5 kg pull

Last Answer : (B) An increase in temperature causes a tape to increase in length and the measured distance is too large

What is the typical separation between the two conductors in a parallel wire line? A. 0.001 to 0.01 m B. 200 to 500 mm C. 0.635 to 15.24 cm D. 2.5 to 5 in.

Description : What is the typical separation between the two conductors in a parallel wire line? A. 0.001 to 0.01 m B. 200 to 500 mm C. 0.635 to 15.24 cm D. 2.5 to 5 in.

Last Answer : C. 0.635 to 15.24 cm

The specific gravity of water is taken as (A) 0.001 (B) 0.01 (C) 0.1 (D) 1

Description : The specific gravity of water is taken as (A) 0.001 (B) 0.01 (C) 0.1 (D) 1

Last Answer : Answer: Option D

The area is measured correct to the nearest (A) 0.01 sqm (B) 0.02 sqm (C) 0.03 sqm (D) 0.04 sqm

Description : The area is measured correct to the nearest (A) 0.01 sqm (B) 0.02 sqm (C) 0.03 sqm (D) 0.04 sqm

Last Answer : (A) 0.01 sqm

The bulk density of aggregates, is generally expressed as (A) tonnes/cubic metre (B) kg/cubic metre (C) kg/litre (D) g/cm3

Description : The bulk density of aggregates, is generally expressed as (A) tonnes/cubic metre (B) kg/cubic metre (C) kg/litre (D) g/cm3

Last Answer : (C) kg/litre

If the above tape weights 0.001 kg/ft, sag is a.2.73 ft b.3.13 ft c.2.90 ft d.3.03 ft e.107 dynes

Description : If the above tape weights 0.001 kg/ft, sag is a.2.73 ft b.3.13 ft c.2.90 ft d.3.03 ft e.107 dynes

Last Answer : c. 2.90 ft

The item of steel work which is measured in sq.m, is (A) Collapsible gates (B) Rolling shutters (C) Ventilators and glazing (D) All the above

Description : The item of steel work which is measured in sq.m, is (A) Collapsible gates (B) Rolling shutters (C) Ventilators and glazing (D) All the above

Last Answer : (D) All the above

The item of the brick structure measured in sq.m, is (A) Reinforced brick work (B) Broken glass coping (C) Brick edging (D) Brick work in arches

Description : The item of the brick structure measured in sq.m, is (A) Reinforced brick work (B) Broken glass coping (C) Brick edging (D) Brick work in arches

Last Answer : (B) Broken glass coping

Brick walls are measured in sq. m if the thickness of the wall is (A) 10 cm (B) 15 cm (C) 20 cm (D) None of these

Description : Brick walls are measured in sq. m if the thickness of the wall is (A) 10 cm (B) 15 cm (C) 20 cm (D) None of these

Last Answer : (A) 10 cm

In a number sequence what is 0.001 0.01 0.1 1?

Description : In a number sequence what is 0.001 0.01 0.1 1?

Last Answer : Each successive number is ten times the one before it.

What is the Next number in the sequence 0.001 0.01 0.1 1?

Description : What is the Next number in the sequence 0.001 0.01 0.1 1?

Last Answer : 10

Threshold limit value of copper in the atmospheric air is - (1) 0.001 mg/m3 (2) 0.01 mg/m3 (3) 1.0 mg/m3 (4) 5.0 mg/m3

Description : Threshold limit value of copper in the atmospheric air is - (1) 0.001 mg/m3 (2) 0.01 mg/m3 (3) 1.0 mg/m3 (4) 5.0 mg/m3

Last Answer : (3) 1.0 mg/m3 Explanation: Inspirable copper dust takes a predominantly fibrous effect. The ALV of copper aerosol in the workplace atmosphere is 0.5 mg/m3, while the threshold limit value (TLV) is 1.0 mg/m3.

A micron is equal to – (1) 0.1 ram (2) 0.01 mm (3) 0.001 mm (4) 0.0001 mm

Description : A micron is equal to – (1) 0.1 ram (2) 0.01 mm (3) 0.001 mm (4) 0.0001 mm

Last Answer : (3) 0.001 mm Explanation: 1 micron = 0.001 millimeters. A micrometre (micron) is one-millionth of a metre (or one-thousandth of a millimetre, 0.001 mm). Its unit symbol in the ... is a common unit of measurement for wavelengths of infrared radiation as well as sizes of cells and bacteria.

Period of oscillation of 3 cm microwaves in seconds is (1) 1 x 10¹⁰ (2) 1 x 10⁻¹⁰ (3) 0.01 (4) 0.001

Description : Period of oscillation of 3 cm microwaves in seconds is (1) 1 x 10¹⁰ (2) 1 x 10⁻¹⁰ (3) 0.01 (4) 0.001

Last Answer : (2) 1 x 10⁻¹⁰ Explanation: The period of oscillation of 3 cm microwaves is 1 x 10^-10 (Physics, Volume 1, by Halliday). The period of oscillation is the smallest interval of time in which a system undergoing oscillation returns to the state it was in at the beginning of the oscillation.

A conductor with a cross-sectional area of one circular mil would have a diameter of _____________. A. 0.1 inches B. 0.01 inches C. 0.001 inches D. 0.0001 inches

Description : A conductor with a cross-sectional area of one circular mil would have a diameter of _____________. A. 0.1 inches B. 0.01 inches C. 0.001 inches D. 0.0001 inches

Last Answer : Answer: C

Very low pressure is expressed in microns (μ), which is equal to__________ mm of Hg column (absolute) at 0°C.(A) 0.0001(B) 0.001(C) 0.01(D) 0.1

Description : Very low pressure is expressed in microns (μ), which is equal to__________ mm of Hg column (absolute) at 0°C. (A) 0.0001 (B) 0.001 (C) 0.01 (D) 0.1

Last Answer : (B) 0.001

Carbon content in steel is __________ percent. (A) 0.1-2 (B) 4-6 (C) 2-4 (D) 0.001-0.01

Description : Carbon content in steel is __________ percent. (A) 0.1-2 (B) 4-6 (C) 2-4 (D) 0.001-0.01

Last Answer : (A) 0.1-2

Angstrom (Å) is equal to (a) 0.01 mm (b) 0.001 mm (c) 0.0001 mm (d) 0.00001 mm

Description : Angstrom (Å) is equal to (a) 0.01 mm (b) 0.001 mm (c) 0.0001 mm (d) 0.00001 mm

Last Answer : (b) 0.001 mm

Rotary vacuum pumps can reduce the absolute pressure to as low as __________ mm Hg. (A) 1 (B) 0.1 (C) 0.01 (D) 0.001

Description : Rotary vacuum pumps can reduce the absolute pressure to as low as __________ mm Hg. (A) 1 (B) 0.1 (C) 0.01 (D) 0.001

Last Answer : (C) 0.01

Maximum permissible residual chlorine in treated water should be __________ mg/litre. (A) 0.001 to 0.01 (B) 0.2 to 0.3 (C) 2 to 3 (D) 5 to 10

Description : Maximum permissible residual chlorine in treated water should be __________ mg/litre. (A) 0.001 to 0.01 (B) 0.2 to 0.3 (C) 2 to 3 (D) 5 to 10

Last Answer : (B) 0.2 to 0.3

The difference in one unit of Rockwell hardness number corresponds to a difference in the depth of indentation of __________ mm. (A) 0.001 (B) 0.01 (C) 0.002 (D) 0.02

Description : The difference in one unit of Rockwell hardness number corresponds to a difference in the depth of indentation of __________ mm. (A) 0.001 (B) 0.01 (C) 0.002 (D) 0.02

Last Answer : Option C

The time of closing the cycle, in modern circuit breakers is (a) 0.003 sec (b) 0.001 sec (c) 0.01 sec (d) 0.10 sec (e) none of the above

Description : The time of closing the cycle, in modern circuit breakers is (a) 0.003 sec (b) 0.001 sec (c) 0.01 sec (d) 0.10 sec (e) none of the above

Last Answer : (a) 0.003 sec

The mechanical splice attenuation loss is _____ dB or less ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.001 ∙ d. 1

Description : The mechanical splice attenuation loss is _____ dB or less ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.001 ∙ d. 1

Last Answer : a. 0.1

A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is A. 8.0 bit B. 2.0 bit C. 1.9 bit D. 2.1 bit

Description : A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is A. 8.0 bit B. 2.0 bit C. 1.9 bit D. 2.1 bit

Last Answer : C. 1.9 bit

A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is a. 8.0 bit b. 2.0 bit c. 1.9 bit d. 2.1 bit

Description : A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is a. 8.0 bit b. 2.0 bit c. 1.9 bit d. 2.1 bit

Last Answer : c. 1.9 bit

A micron is equal to (1) 0.1 mm (2) 0.01 mm (3) 0.001 mm(4) 0.0001 mm

Description : A micron is equal to (1) 0.1 mm (2) 0.01 mm (3) 0.001 mm(4) 0.0001 mm

Last Answer : 0.001 mm

In a transistor Colpitts oscillator, C1 = 0.001 µF, C2 = 0.01 µF and L = 5 µH. The frequency of oscillation in

Description : In a transistor Colpitts oscillator, C1 = 0.001 µF, C2 = 0.01 µF and L = 5 µH. The frequency of oscillation in MHz will be (a) 2.37 MHz (b) 10.00 MHz (c) 11.54 MHz (d) 9.09 MHz 

Last Answer : c

A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the force exerted by the jet on the plate would be in the range a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Description : A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the ... a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Last Answer : a. 15 - 20 kg

Pick up the incorrect statement from the following regarding fire hydrants (A) Fire hydrants are fitted in water mains at 100 m to 150 m apart at fire (B) The minimum water pressure hydrants, is kept 1.5 kg/cm2 (C) The water at pressure 1 to 1.5 kg/cm2 is made available for 4 to 5 hours for constant use (D) None of these

Description : Pick up the incorrect statement from the following regarding fire hydrants (A) Fire hydrants are fitted in water mains at 100 m to 150 m apart at fire (B) The minimum water pressure hydrants, is kept 1.5 kg/ ... to 1.5 kg/cm2 is made available for 4 to 5 hours for constant use (D) None of these

Last Answer : (D) None of these

Pick up the incorrect statement from the following: (A) Tresguet did not provide the top camber for the drainage of surface water (B) Tresguet provided the top camber for the drainage of surface water (C) Telford provided two layers of stones in the central 5.4 m width and one layer was provided on the sides (D) Macadam provided a camber to the formation at the dug-up state, to drain percolated water

Description : Pick up the incorrect statement from the following: (A) Tresguet did not provide the top camber for the drainage of surface water (B) Tresguet provided the top camber for the drainage of surface ... (D) Macadam provided a camber to the formation at the dug-up state, to drain percolated water

Last Answer : Answer: Option A

Pick up the incorrect statement from the following: (A) Lead is the average horizontal straight distance between the borrow pit and the place of spreading soil (B) The lead is calculated for each block of the excavated area (C) The unit of lead is 50 m for a distance upto 500 m (D) The unit of lead is 1 km where the lead exceeds 2 km

Description : Pick up the incorrect statement from the following: (A) Lead is the average horizontal straight distance between the borrow pit and the place of spreading soil (B) The lead is calculated for each block of the ... a distance upto 500 m (D) The unit of lead is 1 km where the lead exceeds 2 km

Last Answer : (D) The unit of lead is 1 km where the lead exceeds 2 km

Pick up the incorrect statement from the following: (A) As a wave of sea water approaches the coast line, it is generally accompanied by a drift of water in the direction of wave advance (B) The on-shore wind helps to produce wave action as well as rise of M.S.L. (C) A falling hydraulic gradient occurs in the direction of the wave (D) The wave while receding carries finer particles out to deep water

Description : Pick up the incorrect statement from the following: (A) As a wave of sea water approaches the coast line, it is generally accompanied by a drift of water in the direction of wave advance (B) ... in the direction of the wave (D) The wave while receding carries finer particles out to deep water

Last Answer : (C) A falling hydraulic gradient occurs in the direction of the wave

Pick up the incorrect statement from the following: In a dry dock block made of hard wood, (A) Spacing of the blocks is 1.35 m (B) The lowest block is 1.8 m long 40 cm × 40 cm in cross-section (C) The middle block is 1.6 m long 40 cm × 40 cm in cross-section (D) None of these

Description : Pick up the incorrect statement from the following: In a dry dock block made of hard wood, (A) Spacing of the blocks is 1.35 m (B) The lowest block is 1.8 m long 40 cm × 40 cm in cross-section (C) The middle block is 1.6 m long 40 cm × 40 cm in cross-section (D) None of these

Last Answer : (D) None of these

Pick up the incorrect statement from the following: (A) Space between the exterior walls of a warehouse and bag piles should be 30 cm (B) Cement bags should preferably be piled on wooden planks (C) Width and height of the pile should not exceed 3 m and 2.70 m respectively (D) None of these

Description : Pick up the incorrect statement from the following: (A) Space between the exterior walls of a warehouse and bag piles should be 30 cm (B) Cement bags should preferably be piled on wooden planks (C) Width and height of the pile should not exceed 3 m and 2.70 m respectively (D) None of these

Last Answer : Answer: Option D

The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2 , the permissible maximum crippling load will be (A) 1.288 tonnes (B) 12.88 (C) 128.8 tonnes (D) 288.0

Description : The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2 , the permissible maximum crippling load will be (A) 1.288 tonnes (B) 12.88 (C) 128.8 tonnes (D) 288.0

Last Answer : (B) 12.88

A three hinged parabolic arch hinged at the crown and springing, has a horizontal span of 4.8 m and a central rise of 1 m. It carries a uniformly distributed load of 0.75 tonne per metre over half left hand span. The horizontal thrust at the support will be (A) 10.8 tonnes (B) 1.08 tonnes (C) 1.8 tonnes (D) 0.8 tonnes

Description : A three hinged parabolic arch hinged at the crown and springing, has a horizontal span of 4.8 m  and a central rise of 1 m. It carries a uniformly distributed load of 0.75 tonne per metre over half  left hand span ... A) 10.8 tonnes  (B) 1.08 tonnes  (C) 1.8 tonnes  (D) 0.8 tonnes 

Last Answer : (B) 1.08 tonnes 

A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale reading is 5 mm and zero of circular

Description : A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale reading is 5 mm and zero of circular

Last Answer : A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale ... (C) 0.053 cm (D) 0.529 cm

The brick work is measured in sq metre, in case of (A) Honey comb brick work (B) Brick flat soling (C) Half brick walls or the partition (D) All the above

Description : The brick work is measured in sq metre, in case of (A) Honey comb brick work (B) Brick flat soling (C) Half brick walls or the partition (D) All the above

Last Answer : (D) All the above

Name any two sparsely populated regions of the world having less than 01 persons per sq km. -Geography

Description : Name any two sparsely populated regions of the world having less than 01 persons per sq km. -Geography

Last Answer : (i) The hot and the cold deserts (ii) High rainfall zones near the equator.

Pick up the correct statement from the following: (A) The structural member subjected to compression and whose dimensions are small as compared to its length, is called a stmt (B) The vertical compression members are generally known as columns or stanchions (C) Deflection in lateral direction of a long column, is generally known as buckling (D) All the above

Description : Pick up the correct statement from the following:  (A) The structural member subjected to compression and whose dimensions are small as  compared to its length, is called a stmt  (B) The ... in lateral direction of a long column, is generally known as buckling  (D) All the above

Last Answer : (D) All the above

What are the dimensions of the rack, and does it come with any weights?

Description : What are the dimensions of the rack, and does it come with any weights?

Last Answer : Maxicam-Triple-Level-Dumbbell-Rack-6-Pair is approximately 30 inches in height, 22 inches in width and 36 inches in length and it does not come with any weights. Troy-Two-Tier-Dumbbell-Rack-10-Pair comes ... in length, 31 inches in height and 25 inches in width. It does not come with any weights.

Pick up the incorrect statement from the following: (A) The water entering the slow sand filters should be treated by 9.386 coagulants (B) The depth of water on the filter should be twice the depth of the filter sand (C) When the filter head is 0.75 times the depth of filter sand, the water obtained is purest (D) All the above

Description : Pick up the incorrect statement from the following:  (A) The water entering the slow sand filters should be treated by 9.386 coagulants  (B) The depth of water on the filter should be twice the ... is 0.75 times the depth of filter sand, the water obtained is purest  (D) All the above 

Last Answer : (D) All the above 

Pick up the incorrect statement from the following. For performing compressive strength test of cement (A) Cement and standard sand mortar are used in the ratio of 1 : 3 (B) Water is added at the rate of (P/4) + 3.0 percentage of water where P is the percentage of water for standard consistency (C) A cube mould of 10 cm × 10 cm × 10 cm is used (D) The prepared moulds are kept in a atmosphere of 50% relative humidity

Description : Pick up the incorrect statement from the following. For performing compressive strength test of cement (A) Cement and standard sand mortar are used in the ratio of 1 : 3 (B) Water is added at the ... cm 10 cm is used (D) The prepared moulds are kept in a atmosphere of 50% relative humidity

Last Answer : Answer: Option A