Description : The brick work is not measured in cu m in case of (A) One or more than one brick wall (B) Brick work in arches (C) Reinforced brick work (D) Half brick wall
Last Answer : (D) Half brick wall
Description : Brick walls are measured in sq. m if the thickness of the wall is (A) 10 cm (B) 15 cm (C) 20 cm (D) None of these
Last Answer : (A) 10 cm
Description : The item of steel work which is measured in sq.m, is (A) Collapsible gates (B) Rolling shutters (C) Ventilators and glazing (D) All the above
Last Answer : (D) All the above
Description : The brick work is measured in sq metre, in case of (A) Honey comb brick work (B) Brick flat soling (C) Half brick walls or the partition (D) All the above
Description : For 12 mm thick cement plastering 1 : 6 on 100 sq.m new brick work, the quantity of cement required, is (A) 0.200 m3 (B) 0.247 m3 (C) 0.274 m3 (D) 0.295 m
Last Answer : (C) 0.274 m3
Description : A bull nose brick is not used for (A) Rounding off sharp corners (B) Pillars (C) Decoration purpose (D) Arches
Last Answer : Answer: Option D
Description : The recommended value of modular ratio for reinforced brick work is (A) 18 (B) 30 (C) 40 (D) 58
Last Answer : (C) 40
Description : The permissible diagonal tensile stress in reinforced brick work is (A) About 0.1 N/mm² (B) Zero (C) 0.3 N/mm² to 0.7 N/mm² (D) About 1.0 N/m2
Last Answer : Answer: Option A
Description : A short column 20 cm 20 cm in section is reinforced with 4 bars whose area of cross section is 20 sq. cm. If permissible compressive stresses in concrete and steel are 40 kg/cm2 and 300 kg/cm2 , the Safe load on ... should not exceed (A) 4120 kg (B) 41,200 kg (C) 412,000 kg (D) None of these
Last Answer : Answer: Option B
Description : Pick up the incorrect statement from the following: (A) Dimensions are measured to the nearest 0.01 m (B) Areas are measured to the nearest 0.01 sq.m (C) Cubic contents are measured to the nearest 0.1 cum (D) Weights are measured to the nearest 0.001 tonnes
Last Answer : (D) Weights are measured to the nearest 0.001 tonnes
Description : Pick up the correct statement from the following: (A) Pointing is measured in sq.m (B) Plastering is measured in sq.m (C) Glazing is measured in sq.m (D) All the above
Description : The thickness of a reinforced brick partition wall, is generally kept (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm
Description : The position of the neutral axis in reinforced brick masonry is independent of the loading and is at a depth of
Last Answer : (a) One-third of the effective depth
Description : There are two hinged semicircular arches A, B and C of radii 5 m, 7.5 m and 10 m respectively and each carries a concentrated load W at their crowns. The horizontal thrust at their supports will be in the ratio of (A) 1 ... (B) 2 : 1½ : 1 (C) 1 : 1 : 2 (D) None of these
Last Answer : (C) 1 : 1 : 2
Description : In a singly reinforced beam, the effective depth is measured from its compression edge to (A) Tensile edge (B) Tensile reinforcement (C) Neutral axis of the beam (D) Longitudinal central axis
Description : Expanded metal is (A) Manufactured from steel sheets (B) Used for reinforced concrete in road pavements (C) Measured in term of SWM (short way mesh) and LWM (long way mesh) (D) All the above
Description : In a singly reinforced beam, the effective depth is measured form the compression edge to the (a) Tensile edge (b) Centre of tensile reinforcement (c) Neutral axis of the beam (d) All of the above
Last Answer : (b) Centre of tensile reinforcement
Description : In the construction of arches, sand box method is used for (A) Centring (B) Actual laying of arch work (C) Striking of centring (D) None of the above
Last Answer : Answer: Option C
Description : The following item of earth work is not measured separately. (A) Setting out of works (B) Site clearance (C) Steps in deep excavation (D) All the above
Description : Higher workability of concrete is required if the structure is (A) Made with cement concrete (B) Thick and reinforced (C) Thin and heavily reinforced (D) Thick and heavily reinforced
Description : In the reinforced cement concrete structure, the steel reinforcement consists of . (a) Deformed bars (b) Cold twisted bars (c) Mildsteel and medium tensile steel bars (d) All of these
Last Answer : (d) All of these
Description : In arches, stratified stones are placed so that their planes are (A) Parallel (B) Perpendicular (C) Radial (D) None of these
Description : A heavy stone is suitable for (A) Arches (B) Rubble masonry (C) Roads (D) Retaining walls
Description : Pick up the correct statement from the following: (A) Soft stones are required for carving (B) Light stones are required for arches (C) Hard stones are required to stand high pressure (D) All the above
Description : Pick up the correct statement from the following: (A) In stone arches, the stones are placed with their natural beds radial (B) In cornices, the stones are placed with their natural beds as vertical (C) In stone walls, the stones are placed with their natural beds as horizontal (D) All the above
Description : The triangular portion between any two adjacent arches and the tangent to their crowns, is (A) Haunch (B) Spandril (C) Soffit (D) Rise
Description : Arches in the form of masonry arcs struck from more than four centres, are called (A) Two curved arches (B) Gothic arches (C) Ogee arches (D) Drop gothic arches
Description : The lintels are preferred to arches because (A) Arches require more headroom to span the openings like doors, windows etc. (B) Arches require strong abutments to withstand arch thrust (C) Arches are difficult in construction (D) All of the above
Description : Pick up the correct statement in case of water supply. (A) Pipes laid in trenches and pipes fixed to walls are measured separately (B) Cutting through walls and floors are included with the item (C) Pipes are classified according to their sizes and quality (D) All the above
Description : The output quality of a printer is measured by A) Dot per inch B) Dot per sq. inch C) Dots printed per unit time D) All of above
Last Answer : Answer : B
Description : The output quality of a printer is measured by A) Dot per sq. inch B) Dot per inch C) Dots printed per unit time D) All of the above
Description : The output quality of a printer is measured by a. Dot per inch b. Dot per sq. inch c. Dots printed per unit time d. All of above
Last Answer : Dot per sq. inch
Last Answer : b. Dot per sq. inch
Description : A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2 MN/mm2 , the ... N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option
Last Answer : (C) 120 N/mm
Description : Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm
Description : For 100 sq. m cement concrete (1 : 2: 4) 4 cm thick floor, the quantity of cement required, is (A) 0.90 m3 (B) 0.94 m3 (C) 0.98 m3 (D) 1.00 m3
Last Answer : (B) 0.94 m3
Description : The expected out turn of 12 mm plastering with cement mortar is (A) 2.5 sq m (B) 4.0 sq m (C) 6.0 sq m (D) 8.0 sq m
Last Answer : (D) 8.0 sq m
Description : Pick up the incorrect statement from the following: (A) No deduction is made for the volume occupied by reinforcement (B) No deduction is made for the openings upto 0.1 sq.m (C) No deduction is made for volumes occupied by pipes, not exceeding 100 sq.cm in crosssection (D) None of these
Last Answer : (D) None of these
Description : The excavation exceeding 1.5 m in width and 10 sq.m in plan area with a depth not exceeding 30 cm, is termed as (A) Excavation (B) Surface dressing (C) Cutting (D) Surface excavation
Last Answer : (D) Surface excavation
Description : The plinth area of a building not includes (A) Area of the walls at the floor level (B) Internal shaft for sanitary installations up to 2 sq m. in area (C) Lift and wall including landing (D) Area of cantilevered porch
Last Answer : (D) Area of cantilevered porch
Description : If the effective plan area of a warehouse is 54 sq. m, and maximum height of piles permitted is 270 cm, the number of cement bags to be stored, is (A) 2000 bags (B) 2200 bags (C) 2400 bags (D) 2700 bags
Description : Knitting: How does drop stitch edging hide color changes in a striped scarf?
Last Answer : There will be one line of a different color-in Silk Garden, it will probably be less noticeable over the whole scarf, but it will still be there. It really can't be otherwise, because the yarn has ... two stitches, one the height of each row, with the yarn of the other color running alongside them.
Description : In moderate and northern climates edging of beds should be performed approximately every?
Last Answer : Feel Free to Answer
Description : What are my options for decorative edging around garden beds?
Last Answer : Some people use pavers or decorative bricks/stones and set them upright around the garden. There are many styles of decorative Fencing made of metal, wood or plastic that is just a few inches high, I found some really nice options at http://www.flowerpotheaven.com/landscape-garden-edging.htm
Description : What is the best edging tool for a lawn?
Last Answer : There are a few choices of edging tools for a lawn. You may want to consider either an automatic edger or even pruning shears, depending on how accurate you need the edging to be.
Description : Which edging rocks are the easiest to install and most affordable for a large job?
Last Answer : Plastic edging strips are probably the most economical of all the edging options you can purchase on the market today. The long strip variety is probably the easiest to work with. When laying this type of ... the edging and not quite as deep as the edging itself. It is most affordable for large job.
Description : What is the easiest tool to use for edging?
Last Answer : Any beveler can also use for edging, but if you really want quality edging consider using a dedicated edger.
Description : How high can you stack the Decorative Stone Landscape Garden Edging?
Last Answer : The Decorative Stone landscaping edging can be stacked about four inches high. If it gets any higher it may collapse on itself.
Description : Garden Edging
Last Answer : Garden Edging One of the most effective ways to keep weeds and unwanted grass from getting into your flowerbeds and gardens is to use a form of edging. Edging can be made of many different types of ... be expensive if you are able to use items that you may already have around the house and yard.