According to ISI method of measurement, the order of the sequence is
(A) Length, breadth, height
(B) Breadth, length, height
(C) Height, length, breadth
(D) None of these

1 Answer

Answer :

(A) Length, breadth, height

Related questions

Description : The order of booking dimensions is (A) Length, breadth, height (B) Breadth, length, height (C) Height, breadth, length (D) None of these

Last Answer : (A) Length, breadth, height

Description : According to ISI recommendations, the maximum depth of stress block for balanced section of a beam of effective depth d is (A) 0.43 d (B) 0.55 d (C) 0.68 d (D) 0.85 d

Last Answer : Answer: Option A

Description : According to ISI, bitumen is classified into (A) 2 grades (B) 4 grades (C) 8 grades (D) 10 grades

Last Answer : Answer: Option D

Description : The dimensions of a 35 litre forma for measuring aggregates by volume, are: (A) length 30 cm, breadth 25 cm, height 30 cm (B) length 39 cm, breadth 25 cm, height 32 cm (C) length 27 cm, breadth 27 cm, height 48 cm (D) length 220 cm, breadth 25 cm, height 40 cm

Last Answer : Answer: Option C

Description : In long and short wall method of estimation, the length of long wall is the centre to centre distance between the walls and (A) Breadth of the wall (B) Half breadth of wall on each side (C) One fourth breadth of wall on each side (D) None of these

Last Answer : (B) Half breadth of wall on each side

Description : The length, breadth and height of a room are 5 m, 4 m and 3 m respectively. Find the cost of white washing the walls of the room and the ceiling at the rate of ₹7.50 m². -Maths 9th

Last Answer : Length of a room (l) = 5m Breadth (b) = 4 m and height (h) = 3 m ∴ Area of 4 walls = 2(l + b) x h = 2(5 + 4) x 3 = 6 x 9 = 54 m² and area of ceiling = l x b = 5 x ... ∴ Total area = 54 + 20 = 74 m2 Rate of white washing = 7.50 per m² ∴ Total cost = ₹74 x 7.50 = ₹555

Description : Find the lateral surface area and total surface area of a cuboid of length 80 cm, breadth 40 cm and height 20 cm. -Maths 9th

Last Answer : Length of cuboid (l) = 80 cm Breadth (b) = 40 cm Height (h) = 20 cm (i) ∴ Lateral surface area = 2h(l + b) = 2 x 20(80 + 40) cm² = 40 x 120 = 4800 cm² (ii) Total surface area = 2(lb ... x 40 + 40 x 20 + 20 x 80) cm² = 2(3200 + 800 + 1600) cm² = 5600 x 2 = 11200 cm²

Description : The length, breadth and height of a room are 5 m, 4 m and 3 m respectively. Find the cost of white washing the walls of the room and ceiling at the rate of Rs 7.50 per m2. -Maths 9th

Last Answer : Length (l) of room = 5m Breadth (b) of room = 4m Height (h) of room = 3m It can be observed that four walls and the ceiling of the room are to be white washed. Total area to be white washed = Area of walls + ... m2 area = Rs.7.50 (Given) Cost of white washing 74 m2 area = Rs. (74 7.50) = Rs. 555

Description : The length, breadth and height of a room are 5 m, -Maths 9th

Last Answer : Area of four walls = 2h (l + b) Here, l = 5 m, b = 4 m and h = 3 m Area of four walls = 2 x 3(5 + 4) = 54 m2 Area of ceiling = l x b = 5 x 4 = 20 m2 Total area to be white-washed = 54 + 20 = 74 m2 Cost of white-washing of 1 square metre = ₹ 7.50 ∴ Cost of white-washing = ₹74 x 7.50 = ₹ 555.

Description : The length, breadth and height of a rectangular parallelopiped are in the ratios 6 : 3 : 1. If the surface area of a cube is equal -Maths 9th

Last Answer : answer:

Description : A cuboid shaped wooden block has 6 cm length, 4 cm breadth and 1 cm height. 17. Two faces measuring 4 cm x 1 cm are coloured in black. 18. Two faces measuring 6 cm x 1 cm are coloured in red. 19. Two faces ... colour on two sides and rest of the four sides having no colour ? (a)12 (b)10 (c)8 (d)4

Last Answer : Answer key : (c)

Description : A cuboid shaped wooden block has 6 cm length, 4 cm breadth and 1 cm height. 12. Two faces measuring 4 cm x 1 cm are coloured in black. 13. Two faces measuring 6 cm x 1 cm are coloured in red. 14. Two ... How many cubes will have 4 coloured sides and two non-coloured sides ? (a)8 (b)4 (c)16 (d)10

Last Answer : Answer key : (b)

Description : A cuboid shaped wooden block has 6 cm length, 4 cm breadth and 1 cm height. 7. Two faces measuring 4 cm x 1 cm are coloured in black. 8. Two faces measuring 6 cm x 1 cm are coloured in red. 9. Two faces measuring ... 1 cm(from 4 cm side). How many small cubes will be formed? (a)6 (b)12 (c)16 (d)24

Last Answer : Answer key : (d)

Description : A cuboid shaped wooden block has 6 cm length, 4 cm breadth and 1 cm height. 2. Two faces measuring 4 cm x 1 cm are coloured in black. 3. Two faces measuring 6 cm x 1 cm are coloured in red. 4. Two faces ... and black colours on at least one side of the cube will be formed? (a)16 (b)12 (c)10 (d)4

Last Answer : Answer key : (d)

Description : The external length, breadth and height of a closed box are 10cm, 9cm and 7cm respectively. The total inner surface area of the box is 262 sq.cm. If the walls of the box are of uniform thickness “t” cm, then “t” equals a) 1cm b) 23/3 cm c) 28/9 cm d) 42.5 cm

Last Answer : a) 1cm

Description : What is the correct sequence of hill stations according to height above mean sea level in descending order? (a) Kodaikanal, Darjeeling, Shimla and Mahabaleshwar (b) Shimla, Darjeeling, ... (c) Kodaikanal, Shimla, Mahabaleshwar and Darjeeling (d) Mahabaleshwar, Shimla, Darjeeling and Kodaikanal

Last Answer : Ans: (b)

Description : The discharge through a large rectangular orifice is given by (where H1 = Height of the liquid above the top of the orifice, H2 = Height of the liquid above the bottom of the orifice, b = Breadth of the orifice, and Cd = Coefficient of ... H1 3/2) (D) Q = (2/3) Cd b (2g) (H2 2 - H1 2 )

Last Answer : Answer: Option C

Description : If L, B and D length, breadth and depth of water in a rectangular sedimentation tank of total  discharge Q, the settling velocity, is  (A) Q/H (B) Q/D (C) Q/(D × B)  (D) Q/(L × B) 

Last Answer : (D) Q/(L × B) 

Description : A simply supported uniform rectangular bar breadth b, depth d and length L carries an isolated  load W at its mid-span. The same bar experiences an extension e under same tensile load. The  ratio of the maximum deflection to the ... (A) L/d (B) L/2d (C) (L/2d)² (D) (L/3d)²

Last Answer : (C) (L/2d)

Description : In a flow net (A) Flow lines and equipotential lines cross each other at right angles (B) Fields are rectangles whose length is twice the breadth (C) Smaller the dimensions of the field, ... gradient and velocity of flow through it (D) For homogeneous soil, the curves are smooth and circular

Last Answer : Option A

Description : The ratio of the length to breadth of a wooden float, is (A) 4.5 (B) 5.5 (C) 6.5 (D) 7.5

Last Answer : (D) 7.5

Description : A queen closer is a (A) Brick laid with its length parallel to the face or direction of wall (B) Brick laid with its breadth parallel to the face or direction of wall (C) Brick having the same ... bricks but half the breadth (D) Brick with half the width at one end and full width at the other

Last Answer : Answer: Option C

Description : The portion of the slab which acts monolithically with the beam and which resists the compressive stresses, is called _________of flange of the T-beam (a) Length (b) Breadth (c) Thickness (d) Depth

Last Answer : (b) Breadth

Description : Write a short note on ISI and AGMARK. -SST 10th

Last Answer : ISI: Indian Standards Institute. AGMARK: AG' is for agriculture and Mark' is for certification mark. Agmark: Food Products. ISI: Electrical Appliances and Industrial products. These are ... a product. These marks generate trust among the consumers regarding the good quality of a commodity.

Description : How does logo with letters ISI, Agmark or Hallmark help consumers ? -SST 10th

Last Answer : These logos help consumers to get assured of quality while purchasing the goods and services. These logos are the symbols of trust, confidence and goodwill of the product.

Description : Write a short note on ISI and AGMARK. -SST 10th

Last Answer : These are logos and certifications which help consumers get assured of quality while purchasing goods and services. The organisations that monitor and issue these certificates allow producers to use their ... it is mandatory on the part of the producers to get certified by these organisations.

Description : What is the full form of 'ISI' ? -How To ?

Last Answer : The full form of 'ISI' is Indian Standards Institution

Last Answer : ISI - Indian Standards Institution; Inter Services Intelligence

Last Answer : ISI is Pakistan's military intelligence agency.

Last Answer : INTER SERVICES INTELLIGENCE

Description : ISI mark is not given to which of the following products? (1) Electrical goods (2) Hosiery goods (3) Biscuits (4) Cloth

Last Answer : (3) Biscuits Explanation: ISI mark is a certification mark for industrial products in India, which is mandatory for certain products to be sold in India, like most of the electrical appliances ... appliances etc., and other products like portland cement, LPG valves, LPG cylinders, automotive tyres.

Description : Agricultural Commodities are graded with – (1) ISI (2) Eco-products (3) AGMARK (4) Green Product

Last Answer : (3) AGMARK Explanation: AGMARK is a certification mark employed on agricultural products in India, assuring that they con-form to a set of standards approved by the Director-ate of Marketing and ... India by the Agricultural Produce (Grading and Marking) Act of 1937 (and ammended in 1986).

Description : As per the ISI Standard first grade toilet soap should have a TFM of?

Last Answer : 76%

Description : ISI mark is not given to which of the following products? (1) Electrical goods (2) Hosiery goods (3) Biscuits (4) Cloth

Last Answer : Biscuits

Description : What is that which, supposing it's greatest breadth to be four inches, length nine inches, and depth three inches and contains a solid foot? -Riddles

Last Answer : A shoe.

Description : The capacity of a cuboidal tank is 50000 litres of water. Find the breadth of the tank, if its length and depth are respectively 2.5 m and 10 m -Maths 9th

Last Answer : Length (l) and depth (h) of tank is 2.5 m and 10 m respectively. To find: The value of breadth, say b. Formula to find the volume of a tank = l b h = (2.5 b 10) m3= 25b m3 Capacity ... of water (Given) Therefore, 25000 b = 50000 This implies, b = 2 Therefore, the breadth of the tank is 2 m.

Description : Give possible expression for the length and breadth of the rectangle whose area is given by 4a2 +4a - 3. -Maths 9th

Last Answer : Given, area of rectangle = 4a2 + 6a-2a-3 = 4a2 + 4a – 3 [by splitting middle term] = 2a(2a + 3) -1 (2a + 3) = (2a – 1)(2a + 3) Hence, possible length = 2a -1 and breadth = 2a + 3

Description : Write the coordinates of the vertices of a rectangle whose length and breadth are 5 and 3 units respectively, -Maths 9th

Last Answer : Given, length of a rectangle = 5 units and breadth of a rectangle = 3 units One vertex is at origin i.e., (0, 0) and one of the other vertices lies in III quadrant. So, the length of the rectangle is 5 ... negative,direction of y-axis and then vertex is C(0, -3). The fourth vertex B is (-5, - 3).

Description : Give possible expression for the length and breadth of the rectangle whose area is given by 4a2 +4a - 3. -Maths 9th

Last Answer : Given, area of rectangle = 4a2 + 6a-2a-3 = 4a2 + 4a – 3 [by splitting middle term] = 2a(2a + 3) -1 (2a + 3) = (2a – 1)(2a + 3) Hence, possible length = 2a -1 and breadth = 2a + 3

Description : Write the coordinates of the vertices of a rectangle whose length and breadth are 5 and 3 units respectively, -Maths 9th

Last Answer : Given, length of a rectangle = 5 units and breadth of a rectangle = 3 units One vertex is at origin i.e., (0, 0) and one of the other vertices lies in III quadrant. So, the length of the rectangle is 5 ... negative,direction of y-axis and then vertex is C(0, -3). The fourth vertex B is (-5, - 3).

Description : If the length of a rectangle is decreased by 3 units and breadth increased by 4 unit, then the area will increase by 9 sq. units. Represent this situation as a linear equation in two variables. -Maths 9th

Last Answer : Solution :-

Description : Write the coordinates of the vertices of a rectangle whose length and breadth are 6 and 3 units respectively, one vertex at the origin, the longer side lies on the y-axis and one of the vertices lies in the second quadrant. -Maths 9th

Last Answer : Solution :-

Description : The length of a rectangle is decreasing at a rate of 3 cm/sec and breadth is increasing at a rate of 4 cm/sec. Find the rate of change of its (a) peri

Last Answer : The length of a rectangle is decreasing at a rate of 3 cm/sec and breadth is increasing at a ... breadth of rectangle are 7 cm and 8 cm respectively.

Description : The diagonal of a rectangle is 10 units. The formula to find the diagonal is `d=sqrt(l^(2)+b^(2))`. Where l and b are length and breadth respectively.

Last Answer : The diagonal of a rectangle is 10 units. The formula to find the diagonal is `d=sqrt(l^(2)+b ... breadth respectively. (10+b)(10-b) is equal to______.

Description : A is the area of the rectangle with length l units and breadth b units. Rewrite the formula for area making l as the subject.

Last Answer : A is the area of the rectangle with length l units and breadth b units. Rewrite the formula for area making l as the subject.

Description : How many square tiles of side 9 cm are required to cover a rectangle of length 36 cm and breadth 18 cm exactly without any tiles overlapping?

Last Answer : 8 of them.

Description : How many square tiles of side 9 cm are required to cover a rectangle of length 36 cm and breadth 18 cm exactly without any tiles overlapping?

Last Answer : 8 of them.

Description : What is the ratio of the length and breadth of the Indian National Flag

Last Answer : 0.12638888888889

Description : Globular proteins have completely folded, coiled polypeptide chain and the axial ratio (ratio of length to breadth) is (A) Less than 10 and generally not greater than 3–4 (B) Generally 10 (C) Greater than 10 and generally 20 (D) Greater than 10

Last Answer : Answer : A

Description : A muff coupling is connecting two shafts. The torque involved is 650N-m. The shaft diameter is 45mm with length and breadth of the key being 14mm and 80mm respectively. Find the shear stress induced in the key. a) 30.2N/mm2 b) 25.8N/mm2 c) 34.4N/mm2 d) None of the listed

Last Answer : b) 25.8N/mm2