The width of different roads as recommended in Nagpur plan by the Indian Road Conference for hilly region, is (A) Same for National Highways (B) Different for National Highways (C) Same for State Highways (D) Same for Major District roads

The width of different roads as recommended in Nagpur plan by the Indian Road Conference for
hilly region, is
(A) Same for National Highways
(B) Different for National Highways
(C) Same for State Highways
(D) Same for Major District roads
by

1 Answer

Answer :

Answer: Option B
by

Related questions

The usual width of side drains along Highways in hilly region, is (A) 50 cm (B) 60 cm (C) 70 cm (D) 100 cm

Description : The usual width of side drains along Highways in hilly region, is (A) 50 cm (B) 60 cm (C) 70 cm (D) 100 cm

Last Answer : Answer: Option B

The usual width of parapet walls along Highways in hilly region, is (A) 50 cm (B) 60 cm (C) 70 cm (D) 80 cm

Description : The usual width of parapet walls along Highways in hilly region, is (A) 50 cm (B) 60 cm (C) 70 cm (D) 80 cm

Last Answer : Answer: Option B

The width of pavement in addition to a gravelled berm 1 m on either side for a two directional traffic recommended by Nagpur Conference of Chief Engineers, is (A) 4.7 m (B) 5.7 m (C) 6.7 m (D) 7.7 m

Description : The width of pavement in addition to a gravelled berm 1 m on either side for a two directional traffic recommended by Nagpur Conference of Chief Engineers, is (A) 4.7 m (B) 5.7 m (C) 6.7 m (D) 7.7 m

Last Answer : Answer: Option C

On the recommendations of Nagpur Conference, the minimum width of a village road may be (A) 2.45 m (B) 2.75 m (C) 3.66 m (D) 4.90 m

Description : On the recommendations of Nagpur Conference, the minimum width of a village road may be (A) 2.45 m (B) 2.75 m (C) 3.66 m (D) 4.90 m

Last Answer : Answer: Option A

According to IRC : 52-1973, for a single lane National Highway in hilly region, (A) Width of the carriageway must be 3.75 m (B) Shoulders on either side must be 1.25 m (C) Total width of the road-way must be 6.25 m (D) Total of the above

Description : According to IRC : 52-1973, for a single lane National Highway in hilly region, (A) Width of the carriageway must be 3.75 m (B) Shoulders on either side must be 1.25 m (C) Total width of the road-way must be 6.25 m (D) Total of the above

Last Answer : Answer: Option D

According to the recommendations of Nagpur Conference, the width formation of an ideal National Highway in hard rock cutting, is (A) 8.9 m (B) 7.9 m (C) 6.9 m (D) 6.5 m

Description : According to the recommendations of Nagpur Conference, the width formation of an ideal National Highway in hard rock cutting, is (A) 8.9 m (B) 7.9 m (C) 6.9 m (D) 6.5 m

Last Answer : Answer: Option B

The normal road width of National and State highways (A) Is kept 45 m (B) In plain and rolling terrain built-up area, is 30 m (C) In mountainous built-up area is 20 m (D) All the above

Description : The normal road width of National and State highways (A) Is kept 45 m (B) In plain and rolling terrain built-up area, is 30 m (C) In mountainous built-up area is 20 m (D) All the above

Last Answer : Answer: Option D

Road width 8.8 m of two lane National highways or State highways in mountainous terrain (A) Excludes the width of parapet (0.6 m) (B) Excludes the width of side drain (0.6 m) (C) Excludes the width of parapet and side drain (D) Includes the width of parapet and side drain

Description : Road width 8.8 m of two lane National highways or State highways in mountainous terrain (A) Excludes the width of parapet (0.6 m) (B) Excludes the width of side drain (0.6 m) (C) Excludes the width of parapet and side drain (D) Includes the width of parapet and side drain

Last Answer : Answer: Option C

Widening of the roads on curves in hilly region, is done (A) On the outer side (B) On the inner side (C) On the outer and inner sides equally (D) Less on outer side and more on inner side

Description : Widening of the roads on curves in hilly region, is done (A) On the outer side (B) On the inner side (C) On the outer and inner sides equally (D) Less on outer side and more on inner side

Last Answer : Answer: Option B

Alignment of highways in hilly regions, is decided on (A) Long stretch of very hard cutting (B) Number of river crossings (C) Natural unstable areas (D) All the above

Description : Alignment of highways in hilly regions, is decided on (A) Long stretch of very hard cutting (B) Number of river crossings (C) Natural unstable areas (D) All the above

Last Answer : Answer: Option D

The normal road land width for a major district road in open area, is (A) 45 m (B) 25 m (C) 15 m (D) 12 m

Description : The normal road land width for a major district road in open area, is (A) 45 m (B) 25 m (C) 15 m (D) 12 m

Last Answer : Answer: Option B

Roadway width for a National highways and State highways (two-lanes) is (A) 12 m (B) 9 m (C) 9.5 m (D) 15 m

Description : Roadway width for a National highways and State highways (two-lanes) is (A) 12 m (B) 9 m (C) 9.5 m (D) 15 m

Last Answer : Answer: Option A

The width of the right of way in urban area, is kept between 24 m to 60 m for (A) National Highways (B) State Highways (C) Both (a) and (b) (D) None of these

Description : The width of the right of way in urban area, is kept between 24 m to 60 m for (A) National Highways (B) State Highways (C) Both (a) and (b) (D) None of these

Last Answer : Answer: Option D

Chhota Nagpur plateau is called the heart of industrial India because it is : (a) near to major iron and steel centres (b) a big link of roads and railways (c) rich in minerals and power fuels (d) very fertile for industrial crops

Description : Chhota Nagpur plateau is called the heart of industrial India because it is : (a) near to major iron and steel centres (b) a big link of roads and railways (c) rich in minerals and power fuels (d) very fertile for industrial crops

Last Answer : Ans: (c)

The National highways system is the responsibility of (a) State Governments (b) Central Government (c) A special Roads Authority (d) State and Central Government

Description : The National highways system is the responsibility of (a) State Governments (b) Central Government (c) A special Roads Authority (d) State and Central Government

Last Answer : Ans: (b)

Roads that link the important cities of various states are referred to as : (1) State Roads (2) National Highways (3) State Highways (4) Superways

Description : Roads that link the important cities of various states are referred to as : (1) State Roads (2) National Highways (3) State Highways (4) Superways

Last Answer : (2) National Highways Explanation: The National Highways Network of India, is a network of highways that is managed and maintained by agencies of the Government of India. India has 70,934 km of national highways (NH) connecting all the major cities and state capitals as of August 2011.

Border Roads Organisation for hilly regions (India), was formed in (A) 1947 (B) 1954 (C) 1958 (D) 1960

Description : Border Roads Organisation for hilly regions (India), was formed in (A) 1947 (B) 1954 (C) 1958 (D) 1960

Last Answer : Answer: Option D

The gradients of trace cuts for hilly roads, are kept (A) Equal to ruling gradient (B) 10 to 20 per cent easier than ruling gradients (C) 10 to 20 per cent steeper than ruling gradients (D) None of these

Description : The gradients of trace cuts for hilly roads, are kept (A) Equal to ruling gradient (B) 10 to 20 per cent easier than ruling gradients (C) 10 to 20 per cent steeper than ruling gradients (D) None of these

Last Answer : Answer: Option B

Minimum radius of curvature of National Highways or State highways in hill region free from snow, is kept (A) 60 m (B) 50 m (C) 33 m (D) 30 m

Description : Minimum radius of curvature of National Highways or State highways in hill region free from snow, is kept (A) 60 m (B) 50 m (C) 33 m (D) 30 m

Last Answer : Answer: Option B

The National Forest Policy of India has recommended ____ percent forest cover for hilly areas.

Description : The National Forest Policy of India has recommended ____ percent forest cover for hilly areas.

Last Answer : The National Forest Policy of India has recommended ____ percent forest cover for hilly areas. A. 67 B. 33 C. 19.4 D. 30

State any four preventive measures of landslides in hilly roads

Description : State any four preventive measures of landslides in hilly roads

Last Answer : a) By providing proper and effective drainage system to intercept and divert seeping water b) By constructing buttress at toe and providing retaining structures c) By providing slopes and their treatment to ... g) By providing nets. h) Chemical treatment. i) Growth of vegetation on the slopes.

Pick up the correct statement from the following: (A) Minimum desirable width of medians on rural highways is 5 metres (B) Minimum width of medians should be 3 metres (C) On long bridges and viaducts, the width of medians should be 1.5 m (D) All the above

Description : Pick up the correct statement from the following: (A) Minimum desirable width of medians on rural highways is 5 metres (B) Minimum width of medians should be 3 metres (C) On long bridges and viaducts, the width of medians should be 1.5 m (D) All the above

Last Answer : Answer: Option D

The Chennai – Bengaluru – Coimbatore - Madurai region is ______. (a) A major industrial region (b) A major agricultural region (c) Mangrove forest region (d) Dry Mountainous (Hilly) region

Description : The Chennai – Bengaluru – Coimbatore - Madurai region is ______. (a) A major industrial region (b) A major agricultural region (c) Mangrove forest region (d) Dry Mountainous (Hilly) region

Last Answer : Ans: (a)

Why is it dangerous to drive on hilly roads ?

Description : Why is it dangerous to drive on hilly roads ?

Last Answer : Hilly roads are usually winding. Many times there are also invisible curves so that the next road is at about 900 angles. This is why driving on hilly roads is extremely dangerous.

What are the precautions to be taken on hilly roads ?

Last Answer : Maintain a safe distance from the car in front. Carefully move up slowly in gear 1 or first gear. You have to go to the top of the hill and climb more slowly , because the visibility on ... to maintain additional distance from the vehicle in front. No overtaking can be done during the ups and downs.

What is the main natural cause of disruption of roads in hilly areas

Description : What is the main natural cause of disruption of roads in hilly areas

Last Answer : landslide

The normal road land width for a National or State highway, in open areas should be (A) 45 m (B) 30 m (C) 24 m (D) 20 m

Description : The normal road land width for a National or State highway, in open areas should be (A) 45 m (B) 30 m (C) 24 m (D) 20 m

Last Answer : Answer: Option A

Is the Highways department as frugal, with salt, and sand for winter roads in your area as they are up here in B.C Canada?

Description : Is the Highways department as frugal, with salt, and sand for winter roads in your area as they are up here in B.C Canada?

Last Answer : Sorry there are a couple of questions in this one, feel free to answer any or all of them.

........................ model is a map which indicates roads, highways, towns and inter- relationships a. Iconic model b. Analogue model c. Mathematical model d. None of these

Description : ........................ model is a map which indicates roads, highways, towns and inter- relationships a. Iconic model b. Analogue model c. Mathematical model d. None of these

Last Answer : b. Analogue model

The road foundation for modern highways construction, was developed by (A) Tresguet (B) Telford (C) Tresguet and Telford simultaneously (D) Telford and Macadam simultaneously

Description : The road foundation for modern highways construction, was developed by (A) Tresguet (B) Telford (C) Tresguet and Telford simultaneously (D) Telford and Macadam simultaneously

Last Answer : Answer: Option D

Design of horizontal curves on highways, is based on (A) Design speed of vehicles (B) Permissible friction on the road surface (C) Permissible centrifugal ratio (D) All the above

Description : Design of horizontal curves on highways, is based on (A) Design speed of vehicles (B) Permissible friction on the road surface (C) Permissible centrifugal ratio (D) All the above

Last Answer : Answer: Option D

According to Indian Road Congress, the width of carriageway, is(A) 3.75 m for single lane (B) 7.0 m for two lanes without raised kerbs (C) 7.5 m for two lanes with raised kerbs (D) All the above

Description : According to Indian Road Congress, the width of carriageway, is (A) 3.75 m for single lane (B) 7.0 m for two lanes without raised kerbs (C) 7.5 m for two lanes with raised kerbs (D) All the above

Last Answer : Answer: Option D

Pick up the incorrect statement from the following. The super-elevation on roads is (A) Directly proportional to width of pavement (B) Directly proportional to velocity of vehicles (C) Inversely proportional to acceleration due to gravity (D) Inversely proportional to the radius of curvature

Description : Pick up the incorrect statement from the following. The super-elevation on roads is (A) Directly proportional to width of pavement (B) Directly proportional to velocity of vehicles (C) Inversely proportional to acceleration due to gravity (D) Inversely proportional to the radius of curvature

Last Answer : Answer: Option B

The weaving length of a roadway is the distance (A) Between the channelizing islands (B) Equal to half circumference (C) Equal to total width of adjoining radial roads (D) Equal to diameter of rotary

Description : The weaving length of a roadway is the distance (A) Between the channelizing islands (B) Equal to half circumference (C) Equal to total width of adjoining radial roads (D) Equal to diameter of rotary

Last Answer : Answer: Option A

The first session of Indian National Congress was held at a) Bombay b) Delhi c) Kolkata d) Nagpur

Description : The first session of Indian National Congress was held at a) Bombay b) Delhi c) Kolkata d) Nagpur

Last Answer : a) Bombay

As the Roman Empire declined, its famous road system suffered. Roads gradually broke down because they were not maintained. What was a major effect of this?

Description : As the Roman Empire declined, its famous road system suffered. Roads gradually broke down because they were not maintained. What was a major effect of this?

Last Answer : As the Roman Empire declined, its famous road system suffered. Roads gradually broke down because they were not maintained. What was a major effect of this? Communication in the empire became less reliable.

What types of grasses and plants sustain harsh winters, hilly, sandy soil, and road salt?

Description : What types of grasses and plants sustain harsh winters, hilly, sandy soil, and road salt?

Last Answer : Buffalo grass (side oats gramma) is very hardy and can take just about anything.

If C is basic capacity per lane, V is velocity in km/hour, S is stopping distance plus length of the vehicles in metres, the formula C = 1000V/S is applicable to (A) District roads (B) Two lane roads (C) Two lane roads in one direction (D) None of these

Description : If C is basic capacity per lane, V is velocity in km/hour, S is stopping distance plus length of the vehicles in metres, the formula C = 1000V/S is applicable to (A) District roads (B) Two lane roads (C) Two lane roads in one direction (D) None of these

Last Answer : Answer: Option C

Road makers along roads from the edge of a kerb should not be less than (A) 40 cm (B) 45 cm (C) 50 cm (D) 60 cm

Description : Road makers along roads from the edge of a kerb should not be less than (A) 40 cm (B) 45 cm (C) 50 cm (D) 60 cm

Last Answer : Answer: Option D

At a road junction, 16 cross conflict points are severe, if (A) Both are one-way roads (B) Both are two-way roads (C) One is two-way road and other is one-way road (D) None of these

Description : At a road junction, 16 cross conflict points are severe, if (A) Both are one-way roads (B) Both are two-way roads (C) One is two-way road and other is one-way road (D) None of these

Last Answer : Answer: Option B

Roughness index of roads, is expressed as (A) Size of the stone on the pavement (B) Number of patches on the pavement (C) Cumulative deformation of surface per horizontal distance (D) Type of the road surface

Description : Roughness index of roads, is expressed as (A) Size of the stone on the pavement (B) Number of patches on the pavement (C) Cumulative deformation of surface per horizontal distance (D) Type of the road surface

Last Answer : Answer: Option C

The maximum safe speed on roads, depends on the (A) Type of road surface (B) Type of curves (C) Sight distance (D) All the above

Description : The maximum safe speed on roads, depends on the (A) Type of road surface (B) Type of curves (C) Sight distance (D) All the above

Last Answer : Answer: Option D

At a road junction, 7 cross conflict points are severe if (A) Both are one-way roads (B) Both are two-way roads (C) One is two-way road and other is one-way road (D) None of these

Description : At a road junction, 7 cross conflict points are severe if (A) Both are one-way roads (B) Both are two-way roads (C) One is two-way road and other is one-way road (D) None of these

Last Answer : Answer: Option C

Following type of pavement is generally known as flexible pavement (A) Water-bound macadam roads (B) Stabilised soil roads (C) Road constructed with various layers of building material well compacted (D) All the above

Description : Following type of pavement is generally known as flexible pavement (A) Water-bound macadam roads (B) Stabilised soil roads (C) Road constructed with various layers of building material well compacted (D) All the above

Last Answer : Answer: Option D

To prevent a head-on-collision of vehicles travelling in opposite directions along four-lane roads (A) Markings on the road are provided (B) Physical dividers are provided (C) Area dividers are provided (D) Medians of wide area are provided

Description : To prevent a head-on-collision of vehicles travelling in opposite directions along four-lane roads (A) Markings on the road are provided (B) Physical dividers are provided (C) Area dividers are provided (D) Medians of wide area are provided

Last Answer : Answer: Option D

The most commonly adopted method to provide super-elevation on roads, is by pivoting the road surface about (A) Outer edge so that the inner edge is lowered (B) Crown so that outer edge is raised and inner edge is lowered (C) Inner edge so that outer edge is raised (D) None of these

Description : The most commonly adopted method to provide super-elevation on roads, is by pivoting the road surface about (A) Outer edge so that the inner edge is lowered (B) Crown so that outer edge is raised and inner edge is lowered (C) Inner edge so that outer edge is raised (D) None of these

Last Answer : Answer: Option C

In hill roads the side drains arc provided (A) Only on the hill side of road (B) Only on the opposite side of hill (C) On both sides of roa(D) None of the above

Description : In hill roads the side drains arc provided (A) Only on the hill side of road (B) Only on the opposite side of hill (C) On both sides of roa (D) None of the above

Last Answer : Answer: Option A

Which of the following is not true with regard to the coastal plains of India ? (a) The west coast has a narrow alluvial margin interspersed by hilly terrain (b) The eastern coast has a wide plain with well-developed deltas of the major rivers (c) The west coast has little indentation except towards the south (d) The west and east coasts, have the same alluvial features

Description : Which of the following is not true with regard to the coastal plains of India ? (a) The west coast has a narrow alluvial margin interspersed by hilly terrain (b) The eastern coast has a ... little indentation except towards the south (d) The west and east coasts, have the same alluvial features

Last Answer : Ans: (d)

The Chhota Nagpur Industrial Region is also known as the ‘Ruhr of India’. Give two reasons to explain why ? -Geography

Description : The Chhota Nagpur Industrial Region is also known as the ‘Ruhr of India’. Give two reasons to explain why ? -Geography

Last Answer : The Chota Nagpur industrial region is also known as the Ruhr of India' because : Different types of minerals like coal, iron ore, bauxite, mica, etc., are available in this region ... helped in the development of different types of mineral-based industries like iron and steel industry, etc.

Explain three reasons as to why there is a large concentration of iron and steel plants in the Chota Nagpur region. -Geography

Description : Explain three reasons as to why there is a large concentration of iron and steel plants in the Chota Nagpur region. -Geography

Last Answer : Three reasons for large concentration of iron and steel plant in Chota Nagpur Region : (i) Availability of raw iron ore (ii) Availability of coal (iii) Availability of cheap labour