When each particle of aggregates is thinly coated with cement paste, a heterogeneous solid is formed, which is known as (A) Hydration (B) Gel (C) Concrete (D) None of these

When each particle of aggregates is thinly coated with cement paste, a heterogeneous solid is
formed, which is known as
(A) Hydration
(B) Gel
(C) Concrete
(D) None of these
by

1 Answer

Answer :

Answer: Option C
by

Related questions

Pick up the correct statement from the following: (A) Water cement paste hardens due to hydration (B) During hardening cement binds the aggregates together (C) Cement provides strength, durability and water tightness to the concrete (D) All the above

Description : Pick up the correct statement from the following: (A) Water cement paste hardens due to hydration (B) During hardening cement binds the aggregates together (C) Cement provides strength, durability and water tightness to the concrete (D) All the above

Last Answer : Answer: Option D

Concrete gains strength due to (A) Chemical reaction of cement with sand and coarse aggregates (B) Evaporation of water from concrete (C) Hydration of cement (D) All the above

Description : Concrete gains strength due to (A) Chemical reaction of cement with sand and coarse aggregates (B) Evaporation of water from concrete (C) Hydration of cement (D) All the above

Last Answer : Answer: Option C

Concrete gains strength due to [ A ] Chemical reaction of cement with sand and coarse aggregates [ B ] Evaporation of water from concrete [ C ] Hydration of cement [ D ] All the above

Description : Concrete gains strength due to [ A ] Chemical reaction of cement with sand and coarse aggregates [ B ] Evaporation of water from concrete [ C ] Hydration of cement [ D ] All the above

Last Answer : [ C ] Hydration of cement

Pick up the incorrect statement from the following: (A) The degree of grinding of cement, is called fineness (B) The process of changing cement paste into hard mass, is known as setting of cement (C) The phenomenon by virtue of which cement does not allow transmission of sound, is known as soundness of cement (D) The heat generated during chemical reaction of cement with water, is known as heat of hydration

Description : Pick up the incorrect statement from the following: (A) The degree of grinding of cement, is called fineness (B) The process of changing cement paste into hard mass, is known as setting of ... (D) The heat generated during chemical reaction of cement with water, is known as heat of hydration

Last Answer : Answer: Option C

In the method of voids for determination of the quantity of cement paste, it is assumed that (A) Voids in coarse aggregates are filled by fine aggregates (B) Voids in fine aggregates are filled by the cement paste (C) Volume of fine aggregates is equal to total voids in coarse aggregates plus 10% extra (D) All the above

Description : In the method of voids for determination of the quantity of cement paste, it is assumed that (A) Voids in coarse aggregates are filled by fine aggregates (B) Voids in fine aggregates are filled by ... of fine aggregates is equal to total voids in coarse aggregates plus 10% extra (D) All the above

Last Answer : Answer: Option D

The condition not applicable to water cement ratio law, is (A) Internal moisture conditions on hydration continue till complete strength is gained (B) Concrete specimens may be tested at any temperature (C) Concrete specimens need be of same age (D) Concrete specimens need be of same size

Description : The condition not applicable to water cement ratio law, is (A) Internal moisture conditions on hydration continue till complete strength is gained (B) Concrete specimens may be tested at any temperature (C) Concrete specimens need be of same age (D) Concrete specimens need be of same size

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) The concrete gains strength due to hydration of cement (B) The concrete does not set at freezing point (C) The strength of concrete increases with its age (D) All the above

Description : Pick up the correct statement from the following: (A) The concrete gains strength due to hydration of cement (B) The concrete does not set at freezing point (C) The strength of concrete increases with its age (D) All the above

Last Answer : Answer: Option D

The deleterious materials present in the aggregate (a) Prevent normal hydration of cement (b) Reduce the strength and durability of concrete. (c) Modify the setting action and cause efloresecence. (d) All of the above

Description : The deleterious materials present in the aggregate (a) Prevent normal hydration of cement (b) Reduce the strength and durability of concrete. (c) Modify the setting action and cause efloresecence. (d) All of the above

Last Answer : (d) All of the above

The ratio of various ingredients (cement, sand, aggregates) in concrete of grade M 200, is (A) 1 : 2 : 4 (B) 1 : 3 : 6 (C) 1 : 1½ : 3 (D) 1 : 1 : 2

Description : The ratio of various ingredients (cement, sand, aggregates) in concrete of grade M 200, is (A) 1 : 2 : 4 (B) 1 : 3 : 6 (C) 1 : 1½ : 3 (D) 1 : 1 : 2

Last Answer : (C) 1 : 1½ : 3

While designing an air entrained concrete (A) Water cement ratio is reduced (B) Proportion of aggregates is reduced (C) An allowance for the entrained air is made (D) All the above

Description : While designing an air entrained concrete (A) Water cement ratio is reduced (B) Proportion of aggregates is reduced (C) An allowance for the entrained air is made (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) The weight of ingredients of concrete mix, is taken in kilograms (B) Water and aggregates are measured in litres (C) 20 bags of cement make one tonne (D) All the above

Description : Pick up the correct statement from the following: (A) The weight of ingredients of concrete mix, is taken in kilograms (B) Water and aggregates are measured in litres (C) 20 bags of cement make one tonne (D) All the above

Last Answer : Answer: Option D

For a good concrete (A) Aggregates should be hard and durable (B) Water should be free from organic materials (C) Cement should be sufficient to produce the required strength (D) All the above

Description : For a good concrete (A) Aggregates should be hard and durable (B) Water should be free from organic materials (C) Cement should be sufficient to produce the required strength (D) All the above

Last Answer : Answer: Option D

According to Water-Cement Ratio Law, the strength of workable plastic concrete (A) Depends upon the amount of water used in the mix (B) Does not depend upon the quality of cement mixed with aggregates (C) Does not depend upon the quantity of cement mixed with aggregates (D) All the above

Description : According to Water-Cement Ratio Law, the strength of workable plastic concrete (A) Depends upon the amount of water used in the mix (B) Does not depend upon the quality of cement mixed with aggregates (C) Does not depend upon the quantity of cement mixed with aggregates (D) All the above

Last Answer : Answer: Option D

If 50 kg of fine aggregates and 100 kg of coarse aggregates are mixed in a concrete whose water cement ratio is 0.6, the weight of water required for harsh mix, is (A) 8 kg (B) 10 kg (C) 12 kg (D) 14 kg

Description : If 50 kg of fine aggregates and 100 kg of coarse aggregates are mixed in a concrete whose water cement ratio is 0.6, the weight of water required for harsh mix, is (A) 8 kg (B) 10 kg (C) 12 kg (D) 14 kg

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) An increase in water content must be accompanied by an increase in cement content (B) Angular and rough aggregates reduce the workability of the concrete (C) The slump of the concrete mix decreases due to an increase in temperature (D) All the above

Description : Pick up the correct statement from the following: (A) An increase in water content must be accompanied by an increase in cement content (B) Angular and rough aggregates reduce the workability of the ... The slump of the concrete mix decreases due to an increase in temperature (D) All the above

Last Answer : Answer: Option D

For preparing ordinary concrete, the quantity of water used, is (A) 5% by weight of aggregates plus 20% of weight of cement (B) 10% by weight of aggregates plus 10% of weight of cement (C) 5% by weight of aggregates plus 30% of weight of cement (D) 30% by weight of aggregates plus 10% of weight of cement

Description : For preparing ordinary concrete, the quantity of water used, is (A) 5% by weight of aggregates plus 20% of weight of cement (B) 10% by weight of aggregates plus 10% of weight of cement (C) ... aggregates plus 30% of weight of cement (D) 30% by weight of aggregates plus 10% of weight of cement

Last Answer : Answer: Option C

For batching 1:3:6 concrete mix by volume, the ingredients required per bag of 50 kg cement, are: (A) 70 litres of sand and 120 litres of aggregates (B) 70 kg of sand and 140 litres of aggregates (C) 105 litres of sand and 140 litres of aggregates (D) 105 litres of sand and 210 litres of aggregates

Description : For batching 1:3:6 concrete mix by volume, the ingredients required per bag of 50 kg cement, are: (A) 70 litres of sand and 120 litres of aggregates (B) 70 kg of sand and 140 litres of ... C) 105 litres of sand and 140 litres of aggregates (D) 105 litres of sand and 210 litres of aggregates

Last Answer : Answer: Option D

Concrete mainly consists of (A) Cement (B) Aggregates (C) Water (D) All the above

Description : Concrete mainly consists of (A) Cement (B) Aggregates (C) Water (D) All the above

Last Answer : Answer: Option D

For the construction of cement concrete dams, the maximum permissible size of the aggregates, is (A) 40 mm (B) 50 mm (C) 60 mm (D) 70 mm

Description : For the construction of cement concrete dams, the maximum permissible size of the aggregates, is (A) 40 mm (B) 50 mm (C) 60 mm (D) 70 mm

Last Answer : Answer: Option A

If the various concrete ingredients i.e. cement, sand and aggregates are in the ratio of 1:3:6, the grade of concrete, is (A) M 100 (B) M 150 (C) M 200 (D) M 250

Description : If the various concrete ingredients i.e. cement, sand and aggregates are in the ratio of 1:3:6, the grade of concrete, is (A) M 100 (B) M 150 (C) M 200 (D) M 250

Last Answer : Answer: Option A

Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C) Curing of concrete is done for proper compaction of cement (D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Description : Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C ... D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Last Answer : Option D

The inert mineral material used for the manufacture of mortars and concrete is (a) Cement (b) Water (c) Aggregates (d) Admixture

Description : The inert mineral material used for the manufacture of mortars and concrete is (a) Cement (b) Water (c) Aggregates (d) Admixture

Last Answer : (c) Aggregates

Shrinkage in concrete can be reduced by using (i) Low water cement ratio (ii) More amount of cement in the concrete (iii) Presaturated aggregates [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Description : Shrinkage in concrete can be reduced by using (i) Low water cement ratio (ii) More amount of cement in the concrete (iii) Presaturated aggregates [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Last Answer : [ C ] i and iii

The basic purpose of a retarder in concrete is (A) To increase the initial setting time of cement paste in concrete (B) To decrease the initial setting time of cement paste in concrete (C) To render the concrete more water tight (D) To improve the workability of concrete mix

Description : The basic purpose of a retarder in concrete is (A) To increase the initial setting time of cement paste in concrete (B) To decrease the initial setting time of cement paste in concrete (C) To render the concrete more water tight (D) To improve the workability of concrete mix

Last Answer : Answer: Option A

The process of conversion of plastic concrete to solid stage is called [ A ] Hydration [ B ] Hardening [ C ] Setting [ D ] Curing

Description : The process of conversion of plastic concrete to solid stage is called [ A ] Hydration [ B ] Hardening [ C ] Setting [ D ] Curing

Last Answer : [ C ] Setting

A thick paste of cement, sand and water is called – (1) Concrete (2) R.C.C. (3) Mortar (4) Kiln

Description : A thick paste of cement, sand and water is called – (1) Concrete (2) R.C.C. (3) Mortar (4) Kiln

Last Answer : (3) Mortar Explanation: Mortar is a workable paste used to bind construction blocks together and fill the gaps between them. Modern mortars are typically made from a mixture of sand, a binder such as cement or lime, and water

A thick paste of cement, sand and water is called (1) Concrete (2) R.C.C. (3) Mortar (4) Kiln

Description : A thick paste of cement, sand and water is called (1) Concrete (2) R.C.C. (3) Mortar (4) Kiln

Last Answer : Mortar

Hydration of cement is due to chemical action of water with (A) Tricalcium silicate and dicalcium silicate (B) Dicalcium silicate and tricalcium aluminate (C) Tricalcium aluminate and tricalcium alumino ferrite (D) All the above

Description : Hydration of cement is due to chemical action of water with (A) Tricalcium silicate and dicalcium silicate (B) Dicalcium silicate and tricalcium aluminate (C) Tricalcium aluminate and tricalcium alumino ferrite (D) All the above

Last Answer : Answer: Option D

Addition of pozzolana to cement (A) Decreases workability (B) Increases strength (C) Increases heat of hydration (D) None of these

Description : Addition of pozzolana to cement (A) Decreases workability (B) Increases strength (C) Increases heat of hydration (D) None of these

Last Answer : Answer: Option D

Addition of pozzolana to cement causes (A) Reduction in permeability (B) Loss of heat of hydration (C) Reduction in bleeding (D) All the above

Description : Addition of pozzolana to cement causes (A) Reduction in permeability (B) Loss of heat of hydration (C) Reduction in bleeding (D) All the above

Last Answer : Answer: Option D

Di-calcium silicate (C2S) (A) Hydrates rapidly (B) Generates less heat of hydration (C) Hardens rapidly (D) Provides less ultimate strength to cement

Description : Di-calcium silicate (C2S) (A) Hydrates rapidly (B) Generates less heat of hydration (C) Hardens rapidly (D) Provides less ultimate strength to cement

Last Answer : Answer: Option B

Tricalcium aluminate (C3A) (A) Reacts fast with water (B) Generates less heat of hydration (C) Causes initial setting and early strength of cement (D) Does not contribute to develop ultimate strength

Description : Tricalcium aluminate (C3A) (A) Reacts fast with water (B) Generates less heat of hydration (C) Causes initial setting and early strength of cement (D) Does not contribute to develop ultimate strength

Last Answer : Answer: Option B

Portland pozzolana cement possesses (A) Higher resistance to chemical attack (B) Lower heat of hydration (C) Lower shrinkage on drying (D) All the above

Description : Portland pozzolana cement possesses (A) Higher resistance to chemical attack (B) Lower heat of hydration (C) Lower shrinkage on drying (D) All the above

Last Answer : Answer: Option D

Addition of pozzolana to ordinary Portland cement increases (A) Bleeding (B) Shrinkage (C) Permeability (D) Heat of hydration

Description : Addition of pozzolana to ordinary Portland cement increases (A) Bleeding (B) Shrinkage (C) Permeability (D) Heat of hydration

Last Answer : Answer: Option B

Hydration of cement is due to the chemical action of water with. (a) Tricalcium silicate (b) Dicalcium silicate (c) Tricalcium aluminate (d) All of these

Description : Hydration of cement is due to the chemical action of water with. (a) Tricalcium silicate (b) Dicalcium silicate (c) Tricalcium aluminate (d) All of these

Last Answer : (d) All of these

The presence of dicalcium silicate in cement. (a) Hydrates the cement slowly. (b) Generates less heat of hydration. (c) Has more resistance to sulphate attack. (d) All of these

Description : The presence of dicalcium silicate in cement. (a) Hydrates the cement slowly. (b) Generates less heat of hydration. (c) Has more resistance to sulphate attack. (d) All of these

Last Answer : (d) All of these

The presence of tricalcium silicate in cement (a) Hydrates the cement rapidly (b) Generates less heat of hydration. (c) Offer high resistance to sulphate attack (d) All of these

Description : The presence of tricalcium silicate in cement (a) Hydrates the cement rapidly (b) Generates less heat of hydration. (c) Offer high resistance to sulphate attack (d) All of these

Last Answer : (a) Hydrates the cement rapidly

The heat of hydration for low heat cement at the age of 7 days shall not exceed [ A ] 80 cal / gm [ B ] 75 cal / gm [ C ] 70 cal / gm [ D ] 65 cal / gm

Description : The heat of hydration for low heat cement at the age of 7 days shall not exceed [ A ] 80 cal / gm [ B ] 75 cal / gm [ C ] 70 cal / gm [ D ] 65 cal / gm

Last Answer : [ D ] 65 cal / gm

During the process of hardening of cement, _______ will takes place [ A ] Bleeding [ B ] Segregation [ C ] Hydration [ D ] All the above

Description : During the process of hardening of cement, _______ will takes place [ A ] Bleeding [ B ] Segregation [ C ] Hydration [ D ] All the above

Last Answer : [ C ] Hydration

A 'breath test' used by traffic police to check drunken driving uses: (1) potassium dichromate-sulphuric acid (2) potassium permanganate-sulphuric acid (3) turmeric on filter paper (4) silica gel coated with silver nitrate

Description : A 'breath test' used by traffic police to check drunken driving uses: (1) potassium dichromate-sulphuric acid (2) potassium permanganate-sulphuric acid (3) turmeric on filter paper (4) silica gel coated with silver nitrate

Last Answer : (1) potassium dichromatesulphuric acid Explanation: The main constituent of alcohol is Ethanol and the concentration of ethanol in a sample can be determined by back titration with acidified potassium ... contact with the yellow dichromate-coated crystals, the color changes from yellow to green.

A ‘breath test’ used by traffic police to check drunken driving uses: (1) potassium dichromate-sulphuric acid (2) potassium perma-nganatesulphuric acid (3) turmeric on filter paper (4) silica gel coated with silver nitrate

Description : A ‘breath test’ used by traffic police to check drunken driving uses: (1) potassium dichromate-sulphuric acid (2) potassium perma-nganatesulphuric acid (3) turmeric on filter paper (4) silica gel coated with silver nitrate

Last Answer : potassium dichromate-sulphuric acid

Pavement is said to be flexible if it contains (A) Water bound macadam surface (B) Stabilised soil base constructed of lime cement or tar (C) Bitumen-bound stone layer of varying aggregates (D) All the above

Description : Pavement is said to be flexible if it contains (A) Water bound macadam surface (B) Stabilised soil base constructed of lime cement or tar (C) Bitumen-bound stone layer of varying aggregates (D) All the above

Last Answer : Answer: Option D

Batching error means inaccuracy in the quantity of (A) Aggregates (B) Cement (C) Water (D) All the above

Description : Batching error means inaccuracy in the quantity of (A) Aggregates (B) Cement (C) Water (D) All the above

Last Answer : Option D

For preparing a test-specimen, it is necessary (A) To mix cement and fine aggregate by dry hand (B) To mix coarse aggregates (C) To mix water to the cement, fine aggregates and coarse aggregates (D) All the above

Description : For preparing a test-specimen, it is necessary (A) To mix cement and fine aggregate by dry hand (B) To mix coarse aggregates (C) To mix water to the cement, fine aggregates and coarse aggregates (D) All the above

Last Answer : Answer: Option D

If P, Y and Z are the weights of cement, fine aggregates and coarse aggregates respectively and W/C is the water cement ratio, the minimum quantity of water to be added to first batch, is obtained by the equation (A) 0.1P + 0.3Y + 0.1Z = W/C × P (B) 0.3P + 0.1Y + 0.01Z = W/C × P (C) 0.4P + 0.2Y + 0.01Z = W/C × P (D) 0.5P + 0.3Y + 0.01Z = W/C × P

Description : If P, Y and Z are the weights of cement, fine aggregates and coarse aggregates respectively and W/C is the water cement ratio, the minimum quantity of water to be added to first batch, is obtained by the equation (A) 0.1P + 0.3Y + 0. ... + 0.2Y + 0.01Z = W/C P (D) 0.5P + 0.3Y + 0.01Z = W/C P

Last Answer : Answer: Option B

For given workability the grading requiring the least amount of water is one that gives (A) Greatest surface area for the given cement and aggregates (B) Least surface area for the given cement and aggregates (C) Least weight for the given cement and aggregates (D) Greatest weight for the given cement and aggregates

Description : For given workability the grading requiring the least amount of water is one that gives (A) Greatest surface area for the given cement and aggregates (B) Least surface area for the given cement ... weight for the given cement and aggregates (D) Greatest weight for the given cement and aggregates

Last Answer : Answer: Option A

ick up the incorrect statement from the following: (A) Admixtures accelerate hydration (B) Admixtures make concrete water proof (C) Admixtures make concrete acid proof (D) Admixtures give high strength

Description : ick up the incorrect statement from the following: (A) Admixtures accelerate hydration (B) Admixtures make concrete water proof (C) Admixtures make concrete acid proof (D) Admixtures give high strength

Last Answer : Answer: Option A

The process of keeping the concrete structure moist is called [ A ] Hydration [ B ] Curing [ C ] Creep [ D ] Shrinkage

Description : The process of keeping the concrete structure moist is called [ A ] Hydration [ B ] Curing [ C ] Creep [ D ] Shrinkage

Last Answer : [ B ] Curing

The process of hardening of concrete in the presence of water is called [ A ] Creep [ B ] Hydration [ C ] Shrinkage [ D ] Curing

Description : The process of hardening of concrete in the presence of water is called [ A ] Creep [ B ] Hydration [ C ] Shrinkage [ D ] Curing

Last Answer : [ B ] Hydration

If 1500 g of water is required to have a cement paste 1875 g of normal consistency, the percentage of water is, (A) 20 % (B) 25 % (C) 30 % (D) 35 %

Description : If 1500 g of water is required to have a cement paste 1875 g of normal consistency, the percentage of water is, (A) 20 % (B) 25 % (C) 30 % (D) 35 %

Last Answer : (B) 25 %