If 1500 g of water is required to have a cement paste 1875 g of normal consistency, the percentage
of water is,
(A) 20 %
(B) 25 %
(C) 30 %
(D) 35 %

1 Answer

Answer :

(B) 25 %

Related questions

Description : The percentage of water for making a cement paste of normal consistency varies from (a) 15 to 25% (b) 25 to 35% (c) 35 to 50% (d) 50 to 60%

Last Answer : (b) 25 to 35%

Description : For determining the compressive strength test on cement is, the percentage amount of water to be added as (Pa = Percentage of water for required consistency) [ A ] 0.25 Pa + 2.5 [ B ] 0.25 Pa + 3.5 [ C ] 0.35 Pa + 2.5 [ D ] 0.35 Pa + 3.5

Last Answer : [ B ] 0.25 Pa + 3.5

Description : The normal consistency of ordinary Portland cement is about (A) 10 % (B) 20 % (C) 30 % (D) 40 %

Last Answer : Answer: Option C

Description : If ‘W’ is the percentage of water required for normal consistency of cement, water to be added for determination of initial setting time is (a) 0.50 W (b) 0.62 W (c) 0.75 W (d) 0.85 W

Last Answer : (d) 0.85 W

Description : For maximum strength and durability minimum percentage of cement, by weight is (A) 15 % (B) 20 % (C) 25 % (D) 30 %

Last Answer : Answer: Option D

Description : If is the percentage of water required for normal consistency, water to be added for determination of initial setting time, is (A) 0.70 P (B) 0.75 P (C) 0.80 P (D) 0.85 p

Last Answer : Answer: Option D

Description : The percentage of voids in cement is approximately (A) 25 % (B) 40 % (C) 60 % (D) 80 %

Last Answer : (B) 40

Description : Pick up the incorrect statement from the following. For performing compressive strength test of cement (A) Cement and standard sand mortar are used in the ratio of 1 : 3 (B) Water is added at the ... cm 10 cm is used (D) The prepared moulds are kept in a atmosphere of 50% relative humidity

Last Answer : Answer: Option A

Description : Percentage of pozzolanic material containing clay upto 80% used for the manufacture of pozzolana cement, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Last Answer : (A) 30 %

Description : An alloy contains 36 % of bronze. What quantity of alloy is required to get 340 g of bronze? a) 1500 b) 944.4 c) 950 d) 1000 e) 980.5 

Last Answer : Answer: B  Let the quantity of alloy required = x g Then 36 % of x =340 g  ⇒ 36/100 × x = 340 g  x = (340 × 100)/36 g  x = 34000/36 g x = 944.4 g

Description : The percentage of chlorine in fresh bleaching powder is roughly (A) 50 to 60 (B) 30 to 35 (C) 40 to 50 (D) 20 to 25

Last Answer : (B) 30 to 35

Description : For one bag of cement water required is (a) 10 kg (b) 30 kg (c) 35 kg (d) 39 kg

Last Answer : (c) 35 kg

Description : The percentage of water for normal consistency, is (A) 5% to 15% (B) 10% to 25% (C) 15% to 25% (D) 20% to 30%

Last Answer : Answer: Option C

Description : For determining the moisture content of a soil sample, the following data is available Weight of container = 260 g, Weight of soil sample and = 320 g container, Weight of soil sample (dried) and = 310 g container. The moisture content of the soil sample, is (A) 15 % (B) 18 % (C) 20 % (D) 25 %

Last Answer : (C) 20 %

Description : The percentage of alumina in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80 %

Last Answer : Answer: Option B

Description : Percentage of silica in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80

Last Answer : Answer: Option C

Description : If water content of a soil is 40%, G is 2.70 and void ratio is 1.35, the degree of saturation is (A) 70 % (B) 75 % (C) 80 % (D) 85 %

Last Answer : Answer: Option C

Description : The percentage of alumina and silica in good fire clay vary respectively is (A) 25, 75 (B) 30, 70 (C) 35, 65 (D) All of these

Last Answer : Answer: Option A

Description : The practical limit of moisture content achieved in air drying of timber is (A) 5 % (B) 15 % (C) 25 % (D) 35 %

Last Answer : Answer: Option B

Description : For quality control of Portland cement, the test essentially done is (A) Setting time (B) Tensile strength (C) Consistency (D) All the above

Last Answer : D

Description : The normal daily output of Urea through urine in grams: (A) 10 to 20 (B) 15 to 25 (C) 20 to 30 (D) 25 to 35

Last Answer : Answer : C

Description : A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one- ... beam, the number of shear stirrups required, is (A) 30 (B) 35 (C) 40 (D) 45

Last Answer : Answer: Option C

Description : An ordinary Portland cement when tested for its fineness, should not leave any residue on I.S. sieve No. 9, more than (A) 5 % (B) 10 % (C) 15 % (D) 20 %

Last Answer : (B) 10 %

Description : In case of hand mixing of concrete, the extra cement to be added is (A) 5 % (B) 10 % (C) 15 % (D) 20 %

Last Answer : (B) 10 %

Description : Water cement ratio is generally expressed in volume of water required per (A) 10 kg (B) 20 kg (C) 30 kg (D) 50 kg

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) Water cement paste hardens due to hydration (B) During hardening cement binds the aggregates together (C) Cement provides strength, durability and water tightness to the concrete (D) All the above

Last Answer : Answer: Option D

Description : Pick up the incorrect statement from the following: (A) The degree of grinding of cement, is called fineness (B) The process of changing cement paste into hard mass, is known as setting of ... (D) The heat generated during chemical reaction of cement with water, is known as heat of hydration

Last Answer : Answer: Option C

Description : The basic purpose of a retarder in concrete is (A) To increase the initial setting time of cement paste in concrete (B) To decrease the initial setting time of cement paste in concrete (C) To render the concrete more water tight (D) To improve the workability of concrete mix

Last Answer : Answer: Option A

Description : A singly reinforced concrete beam of 25 cm width and 70 cm effective depth is provided with 18.75 cm2 steel. If the modular ratio (m) is 15, the depth of the neutral axis, is (A) 20 cm (B) 25 cm (C) 30 cm (D) 35 cm

Last Answer : Answer: Option C

Description : The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm2 respectively. If m = 15, the depth of its neutral axis is (A) 20 cm (B) 25 cm (C) 30 cm (D) 35 cm

Last Answer : Answer: Option C

Description : The maximum ratio of span to depth of a slab simply supported and spanning in one direction, is (A) 35 (B) 25 (C) 30 (D) 20

Last Answer : Answer: Option C

Description : The peak of a 4 hour flood hydrograph is 240 m3 /sec. If the rainfall excess is 80 mm and base flow which is constant is 40 m3 /sec, peak of 4hours unit hydrograph will be (A) 20 m3 /sec (B) 25 m3 /sec (C) 30 m3 /sec (D) 35 m3 /sec

Last Answer : Answer: Option B

Description : Minimum clear cover (in mm) to the main steel bars in slab, beam, column and footing respectively, are (a) 10, 15, 20 and 25 (b) 15, 25, 40 and 75 (c ) 20, 25, 30 and 40 (d) 20, 35, 40 and 75

Last Answer : (b) 15, 25, 40 and 75

Description : The maximum ratio of span to depth of a slab simply supported and spanning in one direction is (a) 35 (b) 25 (c) 30 (d) 20

Last Answer : (c) 30

Description : The total weight of a pycnometer with water and oven dried soil 20 (g) is 1600 g. The pycnometer filled with water alone weighs 1500 g. The specific gravity of the soil, is (A) 1.0 (B) 1.5 (C) 2.0 (D) 2.5

Last Answer : (C) 2.0

Description : Water required per bag of cement, is (A) 7 kg (B) 14 kg (C) 21 kg (D) 35 kg

Last Answer : (D) 35 kg

Description : When each particle of aggregates is thinly coated with cement paste, a heterogeneous solid is formed, which is known as (A) Hydration (B) Gel (C) Concrete (D) None of these

Last Answer : Answer: Option C

Description : In the method of voids for determination of the quantity of cement paste, it is assumed that (A) Voids in coarse aggregates are filled by fine aggregates (B) Voids in fine aggregates are filled by ... of fine aggregates is equal to total voids in coarse aggregates plus 10% extra (D) All the above

Last Answer : Answer: Option D

Description : The reduction of the PH value, by the action of atmospheric carbon dioxide with the alkali of the cement paste is called [ A ] atmospheric corrosion [ B ] chloride corrosion [ C ] oxidation [ D ] carbonation

Last Answer : [ D ] carbonation

Description : The reduction of the PH value, by the action of atmospheric carbon dioxide with the alkali of the cement paste is called [ A ] atmospheric corrosion [ B ] chloride corrosion [ C ] oxidation [ D ] carbonation

Last Answer : [ D ] carbonation

Description : An Aided school has only three classes which contain 70, 36 and 40students respectively. The pass percentage of these classes are30,25 and 20 respectively. The pass percentage of the aided school is A) 23 % B) 15% C) 26 % D) 30% 

Last Answer : C) Total number of students passed in class1 = 30/100 *70 = 21 Total number of students passed in class 2= 25/100 *36 = 9 Total number of students passed in class 3= 20/100 *40 = 8 Total number of students passed in the school = 38 Thus, pass percentage of the school = 38 /146*100 = 26 %

Description : The absolute percentage error in the computed discharge over a rectangular weir corresponding to an absolute error of 1.5 % in the measurement of head over the sill of the weir would be : (a) 1.5 (b) 2.25 (c) 2.5 (d) 3.75

Last Answer : (b) 2.25

Description : Two observation wells penetrating into a confined aquifer are located 1500 m apart in the direction of flow. Heads of 50 m and 25 m are indicated at these two observation wells. If the coefficient of permeability for the ... well to another is (a) 75 days (b) 750 days (c) 1200 days (d) 3000 days

Last Answer : (b) 750 days

Description : If the permissible compressive and tensile stresses in a singly reinforced beam are 50 kg/cm2 and 1400 kg/cm2 respectively and the modular ratio is 18, the percentage area At of the steel required for an economic section, is (A) 0.496 % (B) 0.596 % (C) 0.696 % (D) 0.796 %

Last Answer : Answer: Option C

Description : The percentage of the aggregate of F.M. 2.6 to be combined with coarse aggregate of F.M. 6.8 for obtaining the aggregates of F.M. 5.4, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Last Answer : (C) 50 %

Description : A helical spring is fabricated by wrapping wire 19.05 mm in diameter around a forming cylinder 203.2 mm in diameter. Compute the number of turns required to permit an elongation of 101.6 mm. without exceeding a shearing ... G = 82737 N/mm2. a. 10 turns b. 20 turns c. 25 turns d. 30 turns

Last Answer : a. 10 turns

Description : The percentage of carbon in mild steel is (A) 0.08 to 0.3 % (B) 0.5 to 1.4 % (D) 2.35 % (D) 0.5 %

Last Answer : (A) 0.08 to 0.3 %

Description : Recommended moisture contain for harvesting of paddy crop is between — percentage a. 21 to 23 b. 25 to 27 c. 10 to 15 d. 30 to 35

Last Answer : a. 21 to 23

Description : The weight of a pycnometer containing 400 g sand and water full to the top is 2150 g. The weight of pycnometer full of clean water is 1950 g. If specific gravity of the soil is 2.5, the water content is (A) 5 % (B) 10 % (C) 15 % (D) 20 %

Last Answer : (D) 20 %

Description : The efficiency of a internal combustion engine normally is of the order of a. 15-20 % b. 20-25% c. 25-30% d. 30-35%

Last Answer : ANSWER d. 30-35%