On a pavement with parabolic camber, the angle of inclination of the vehicles will be (A) More at the crown (B) Less at the edges(C) More at the edges (D) Same at the edges as well as at the crown

On a pavement with parabolic camber, the angle of inclination of the vehicles will be
(A) More at the crown
(B) Less at the edges
(C) More at the edges
(D) Same at the edges as well as at the crown
by

1 Answer

Answer :

Answer: Option C
by

Related questions

Camber in pavements is provided by (A) Straight line method (B) Parabola method (C) Straight at the edges and parabolic at the crown (D) All the above

Description : Camber in pavements is provided by (A) Straight line method (B) Parabola method (C) Straight at the edges and parabolic at the crown (D) All the above

Last Answer : Answer: Option D

The convexity provided to the carriageway between the crown and edge of the pavement, is known as (A) Super-elevation (B) Camber (C) Height of the pavement (D) None of these

Description : The convexity provided to the carriageway between the crown and edge of the pavement, is known as (A) Super-elevation (B) Camber (C) Height of the pavement (D) None of these

Last Answer : Answer: Option B

If the difference in elevation of an edge of the pavement 9 m wide and its crown is 15 cm, the camber of the pavement, is (A) 1 in 60 (B) 1 in 45 (C) 1 in 30 (D) 1 in 15

Description : If the difference in elevation of an edge of the pavement 9 m wide and its crown is 15 cm, the camber of the pavement, is (A) 1 in 60 (B) 1 in 45 (C) 1 in 30 (D) 1 in 15

Last Answer : Answer: Option C

The camber on pavements, is provided by (A) Straight line method (B) Parabolic method (C) Straight line and parabolic at crown (D) Elliptical method

Description : The camber on pavements, is provided by (A) Straight line method (B) Parabolic method (C) Straight line and parabolic at crown (D) Elliptical method

Last Answer : Answer: Option C

Excessive camber on pavements may cause (A) Deterioration of central portion (B) Slip of the speedy vehicles towards the edges (C) Erosion of the berms (D) All the above

Description : Excessive camber on pavements may cause (A) Deterioration of central portion (B) Slip of the speedy vehicles towards the edges (C) Erosion of the berms (D) All the above

Last Answer : Answer: Option D

The camber of shoulders in water bound macadam roads is (A) Equal to the cross slope of pavement (B) Less than the cross slope of pavement (C) Greater than the cross slope of pavement (D) Zero

Description : The camber of shoulders in water bound macadam roads is (A) Equal to the cross slope of pavement (B) Less than the cross slope of pavement (C) Greater than the cross slope of pavement (D) Zero

Last Answer : Answer: Option A

Explain the following terms with sketch and suitable range: (i) King pin inclination (ii) Camber

Description : Explain the following terms with sketch and suitable range: (i) King pin inclination (ii) Camber 

Last Answer : (i) King pin inclination It is the angle between vertical line and centre line of king pin or steering axis when viewed from the front of the vehicle. King pin inclination helps the straight ahead ... positive if the tilt is outward at the top. Camber should not generally exceed 2°. 

Before providing super-elevation on roads, the portion of the carriageway between the crown and the outer edge is made (A) To have a reduced fall (B) Horizontal (C) To have slope of the camber on the other half of the carriageway (D) None of these

Description : Before providing super-elevation on roads, the portion of the carriageway between the crown and the outer edge is made (A) To have a reduced fall (B) Horizontal (C) To have slope of the camber on the other half of the carriageway (D) None of these

Last Answer : Answer: Option C

When load is applied on concrete pavement (A) Away from edges, the maximum bending moment is negative (B) Away from edges, the maximum bending moment cause compression (C) On the edges, the maximum stress is parallel to the edge of the slab (D) None of these

Description : When load is applied on concrete pavement (A) Away from edges, the maximum bending moment is negative (B) Away from edges, the maximum bending moment cause compression (C) On the edges, the maximum stress is parallel to the edge of the slab (D) None of these

Last Answer : Answer: Option C

The horizontal deflection of a parabolic curved beam of span 10 m and rise 3 m when loaded with a uniformly distributed load l t per horizontal length is (where Ic is the M.I. at the crown, which varies as the slope of the arch). (A) 50/EIc (B) 100/EIc (C) 150/EIc (D) 200/E

Description : The horizontal deflection of a parabolic curved beam of span 10 m and rise 3 m when loaded with  a uniformly distributed load l t per horizontal length is (where Ic  is the M.I. at the crown, which  varies as the slope ... arch).  (A) 50/EIc (B) 100/EIc (C) 150/EIc (D) 200/E

Last Answer : (D) 200/E

The rise of a parabolic arch at quarter points, is equal to (A) 1/3 times the rise of the crown (B) 1/4 times the rise of the crown (C) 1/2 times the rise of the crown (D) 3/4 times the rise of the crown

Description : The rise of a parabolic arch at quarter points, is equal to (A) 1/3 times the rise of the crown (B) 1/4 times the rise of the crown (C) 1/2 times the rise of the crown (D) 3/4 times the rise of the crown

Last Answer : (D) 3/4 times the rise of the crown

A three hinged parabolic arch hinged at the crown and springing, has a horizontal span of 4.8 m and a central rise of 1 m. It carries a uniformly distributed load of 0.75 tonne per metre over half left hand span. The horizontal thrust at the support will be (A) 10.8 tonnes (B) 1.08 tonnes (C) 1.8 tonnes (D) 0.8 tonnes

Description : A three hinged parabolic arch hinged at the crown and springing, has a horizontal span of 4.8 m  and a central rise of 1 m. It carries a uniformly distributed load of 0.75 tonne per metre over half  left hand span ... A) 10.8 tonnes  (B) 1.08 tonnes  (C) 1.8 tonnes  (D) 0.8 tonnes 

Last Answer : (B) 1.08 tonnes 

Pick up the incorrect statement from the following. The super-elevation on roads is (A) Directly proportional to width of pavement (B) Directly proportional to velocity of vehicles (C) Inversely proportional to acceleration due to gravity (D) Inversely proportional to the radius of curvature

Description : Pick up the incorrect statement from the following. The super-elevation on roads is (A) Directly proportional to width of pavement (B) Directly proportional to velocity of vehicles (C) Inversely proportional to acceleration due to gravity (D) Inversely proportional to the radius of curvature

Last Answer : Answer: Option B

The weight of vehicles affects (A) Pavement thickness (B) Ruling gradient (C) Limiting gradient (D) All the above

Description : The weight of vehicles affects (A) Pavement thickness (B) Ruling gradient (C) Limiting gradient (D) All the above

Last Answer : Answer: Option D

Least force required to draw a body up the inclined plane is W sin (plane inclination + friction angle) applied in the direction (A) Along the plane (B) Horizontally (C) Vertically(D) At an angle equal to the angle of friction to the inclined plane

Description : Least force required to draw a body up the inclined plane is W sin (plane inclination + friction  angle) applied in the direction  (A) Along the plane  (B) Horizontally  (C) Vertically  (D) At an angle equal to the angle of friction to the inclined plane 

Last Answer : (D) At an angle equal to the angle of friction to the inclined plane 

If a gauge is installed perpendicular to the slope, its measurement is reduced by multiplying (A) Sine of the angle of inclination with vertical (B) Cosine of the angle of inclination with vertical (C) Tangent of the angle of inclination with vertical (D) Calibration coefficient of the gauge

Description : If a gauge is installed perpendicular to the slope, its measurement is reduced by multiplying (A) Sine of the angle of inclination with vertical (B) Cosine of the angle of inclination with vertical (C) Tangent of the angle of inclination with vertical (D) Calibration coefficient of the gauge

Last Answer : Answer: Option B

divide wall is provided (A) At right angle to the axis of weir (B) Parallel to the axis of weir and upstream of it (C) Parallel to the axis of weir and downstream of it (D) At an inclination to the axis of weir

Description : divide wall is provided (A) At right angle to the axis of weir (B) Parallel to the axis of weir and upstream of it (C) Parallel to the axis of weir and downstream of it (D) At an inclination to the axis of weir

Last Answer : Answer: Option A

An open vessel of water is accelerated up an inclined plane. The free water surface will (A) Be horizontal (B) Make an angle in direction of inclination of inclined plane (C) Make an angle in opposite direction to inclination of inclined plane (D) Any one of above is possible

Description : An open vessel of water is accelerated up an inclined plane. The free water surface will (A) Be horizontal (B) Make an angle in direction of inclination of inclined plane (C) Make an angle in opposite direction to inclination of inclined plane (D) Any one of above is possible

Last Answer : Answer: Option C

Which type of mirror is used in the head lights of vehicles? (1) Plane mirror (2) Concave mirror (3) Convex mirror (4) Parabolic mirror

Description : Which type of mirror is used in the head lights of vehicles? (1) Plane mirror (2) Concave mirror (3) Convex mirror (4) Parabolic mirror

Last Answer : (2) Concave mirror Explanation: Car head lights have concave mirrors because it collects and focuses as much as possible of the light from the bulb and send it out as a fairly tight beam in one ... at the focal point. The reflected light is parallel and gives more visibility to the driver at night.

Which type of mirror is used in the head lights of vehicles ? (1) Plane mirror (2) Concave mirror (3) Convex mirror (4) Parabolic mirror

Description : Which type of mirror is used in the head lights of vehicles ? (1) Plane mirror (2) Concave mirror (3) Convex mirror (4) Parabolic mirror

Last Answer : Concave mirror

Following type of pavement is generally known as flexible pavement (A) Water-bound macadam roads (B) Stabilised soil roads (C) Road constructed with various layers of building material well compacted (D) All the above

Description : Following type of pavement is generally known as flexible pavement (A) Water-bound macadam roads (B) Stabilised soil roads (C) Road constructed with various layers of building material well compacted (D) All the above

Last Answer : Answer: Option D

If N is deviation angle the length L of a parabolic vertical curve for overtaking sight distance S, is (A) NS²/9.6 if L > S (B) NS²/9.6 if L < S (C) 2S - 9.6/N if L < S (D) Both (A) and (C)

Description : If N is deviation angle the length L of a parabolic vertical curve for overtaking sight distance S, is (A) NS²/9.6 if L > S (B) NS²/9.6 if L < S (C) 2S - 9.6/N if L < S (D) Both (A) and (C)

Last Answer : Answer: Option D

If N is deviation angle, the length L, of a parabolic vertical curve for safe stopping distance S, is(A) NS²/4.4 if L > S(B) 2S - 4.4/N if L < S(C) 2S - 4.4/N if L > S(D) Both (a) and (b)

Description : If N is deviation angle, the length L, of a parabolic vertical curve for safe stopping distance S, is (A) NS²/4.4 if L > S (B) 2S - 4.4/N if L < S (C) 2S - 4.4/N if L > S (D) Both (a) and (b)

Last Answer : Answer: Option D

The direction of projection for the range of a projectile to be maximum on an inclined plane having angle of inclination 30? to the horizontal, whould be a.45? with horizontal b.30? with vertical c.30? with horizontal d.60? with inclined plane e.45? with inclined plane

Description : The direction of projection for the range of a projectile to be maximum on an inclined plane having angle of inclination 30? to the horizontal, whould be a.45? with horizontal b.30? with vertical c.30? with horizontal d.60? with inclined plane e.45? with inclined plane

Last Answer : b. 30? with vertical

The angle which an inclined surface makes with the horizontal when a body placed on it is on the point moving down is known as a.Angle of friction b.Angle of limiting friction c.Angle of inclination d.Angle of repose e.None of the above

Description : The angle which an inclined surface makes with the horizontal when a body placed on it is on the point moving down is known as a.Angle of friction b.Angle of limiting friction c.Angle of inclination d.Angle of repose e.None of the above

Last Answer : d. Angle of repose

A gun fires shell with a muzzle velocity of 600 m/sec. The angle of inclination of the gun so that the shell hits a target at a distance of 32 km at level 100 m higher than the gun would be approximately? a.60? b.45? c.30? d.15? e.Either of (A) and (C)

Description : A gun fires shell with a muzzle velocity of 600 m/sec. The angle of inclination of the gun so that the shell hits a target at a distance of 32 km at level 100 m higher than the gun would be approximately? a.60? b.45? c.30? d.15? e.Either of (A) and (C)

Last Answer : e. Either of (A) and (C)

What is the difference between the angle of inclination and the angle of incidence?

Description : What is the difference between the angle of inclination and the angle of incidence?

Last Answer : Need answer

What is the angle of inclination of GPS system? A. 55˚ B. 65˚ C. 105˚ D. 45˚

Description : What is the angle of inclination of GPS system? A. 55˚ B. 65˚ C. 105˚ D. 45˚

Last Answer : A. 55

Select the correct statement. (A) More the value of group index, less thickness of pavement will be required (B) More the value of CBR, greater thickness of pavement will be required (C) Minimum and maximum values of group index can be 0 and 20 respectively (D) All of the above

Description : Select the correct statement. (A) More the value of group index, less thickness of pavement will be required (B) More the value of CBR, greater thickness of pavement will be required (C) Minimum and maximum values of group index can be 0 and 20 respectively (D) All of the above

Last Answer : Answer: Option C

The aggregate impact value of the aggregate used in (A) Building concrete is less than 45 (B) Road pavement concrete is less than 30 (C) Runway concrete is less than 30 (D) All the above

Description : The aggregate impact value of the aggregate used in (A) Building concrete is less than 45 (B) Road pavement concrete is less than 30 (C) Runway concrete is less than 30 (D) All the above

Last Answer : Answer: Option D

The desirable camber for straight roads with water bound macadam or gravel surface, is (A) 1 in 33 to 1 in 25 (B) 1 in 40 to 1 in 33 (C) 1 in 150 to 1 in 140 (D) 1 in 160 to 1 in 140

Description : The desirable camber for straight roads with water bound macadam or gravel surface, is (A) 1 in 33 to 1 in 25 (B) 1 in 40 to 1 in 33 (C) 1 in 150 to 1 in 140 (D) 1 in 160 to 1 in 140

Last Answer : Answer: Option B

Pick up the incorrect statement from the following: (A) Tresguet did not provide the top camber for the drainage of surface water (B) Tresguet provided the top camber for the drainage of surface water (C) Telford provided two layers of stones in the central 5.4 m width and one layer was provided on the sides (D) Macadam provided a camber to the formation at the dug-up state, to drain percolated water

Description : Pick up the incorrect statement from the following: (A) Tresguet did not provide the top camber for the drainage of surface water (B) Tresguet provided the top camber for the drainage of surface ... (D) Macadam provided a camber to the formation at the dug-up state, to drain percolated water

Last Answer : Answer: Option A

If the designed speed on a circular curve of radius 1400 m is 80 km/hour, no super-elevation is provided, if the camber, is (A) 4 % (B) 3 % (C) 2 % (D) 1.7 %

Description : If the designed speed on a circular curve of radius 1400 m is 80 km/hour, no super-elevation is provided, if the camber, is (A) 4 % (B) 3 % (C) 2 % (D) 1.7 %

Last Answer : Answer: Option C

On earth roads, the camber should preferably be (A) 1 in 20 to 1 in 24 (B) 1 in 30 to 1 in 48 (C) 1 in 15 to 1 in 20 (D) 1 in 10 to 1 in 15

Description : On earth roads, the camber should preferably be (A) 1 in 20 to 1 in 24 (B) 1 in 30 to 1 in 48 (C) 1 in 15 to 1 in 20 (D) 1 in 10 to 1 in 15

Last Answer : Answer: Option A

The desirable camber for straight cement concrete roads, is (A) 1 in 33 to 1 in 25 (B) 1 in 40 to 1 in 33 (C) 1 in 150 to 1 in 140 (D) 1 in 160 to 1 in 140

Description : The desirable camber for straight cement concrete roads, is (A) 1 in 33 to 1 in 25 (B) 1 in 40 to 1 in 33 (C) 1 in 150 to 1 in 140 (D) 1 in 160 to 1 in 140

Last Answer : Answer: Option D

In scanty rainfall regions, the camber provided will be (A) Nil (B) Flatter (C) Steeper (D) None of these

Description : In scanty rainfall regions, the camber provided will be (A) Nil (B) Flatter (C) Steeper (D) None of these

Last Answer : Answer: Option B

The desirable camber for straight roads with thin bituminous surfacing, is (A) 1 in 33 to 1 in 25 (B) 1 in 40 to 1 in 33 (C) 1 in 150 to 1 in 140 (D) 1 in 160 to 1 in 140

Description : The desirable camber for straight roads with thin bituminous surfacing, is (A) 1 in 33 to 1 in 25 (B) 1 in 40 to 1 in 33 (C) 1 in 150 to 1 in 140 (D) 1 in 160 to 1 in 140

Last Answer : Answer: Option C

The minimum value of camber provided for thin bituminous surface hill roads, is (A) 2.2 % (B) 2.5 % (C) 3.0 % (D) 3.5 %

Description : The minimum value of camber provided for thin bituminous surface hill roads, is (A) 2.2 % (B) 2.5 % (C) 3.0 % (D) 3.5 %

Last Answer : Answer: Option B

On concrete roads, the camber generally provided, is (A) 1 in 20 to 1 in 24 (B) 1 in 30 to 1 in 48 (C) 1 in 36 to 1 in 48 (D) 1 in 60 to 1 in 72

Description : On concrete roads, the camber generally provided, is (A) 1 in 20 to 1 in 24 (B) 1 in 30 to 1 in 48 (C) 1 in 36 to 1 in 48 (D) 1 in 60 to 1 in 72

Last Answer : Answer: Option D

The camber for hill roads in case of bituminous surfacing is adopted as (A) 2 % (B) 2.5 % (C) 3 % (D) 4 %

Description : The camber for hill roads in case of bituminous surfacing is adopted as (A) 2 % (B) 2.5 % (C) 3 % (D) 4 %

Last Answer : Answer: Option B

Hill roads are (A) Provided camber along spur curves (B) Provided camber along valley curves (C) Seldom provided a camber (D) None of these

Description : Hill roads are (A) Provided camber along spur curves (B) Provided camber along valley curves (C) Seldom provided a camber (D) None of these

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) The cross fall of the shoulder should be at least 0.5% steeper than camber (B) On super-elevated sections, the shoulders should be provided a cross fall equal to camber (C) Earthen roads in general are provided steepest cross-fall (D) All the above

Description : Pick up the correct statement from the following: (A) The cross fall of the shoulder should be at least 0.5% steeper than camber (B) On super-elevated sections, the shoulders should be provided a ... equal to camber (C) Earthen roads in general are provided steepest cross-fall (D) All the above

Last Answer : Answer: Option D

Maximum number of vehicles can be parked with (A) Parallel parking (B) 30° angle parking (C) 45° angle parking (D) 90° angle parking

Description : Maximum number of vehicles can be parked with (A) Parallel parking (B) 30° angle parking (C) 45° angle parking (D) 90° angle parking

Last Answer : Answer: Option D

Contact pressure beneath a rigid footing resting on cohesive soil is (A) Less at edges compared to middle (B) More at edges compared to middle (C) Uniform throughout (D) None of the above

Description : Contact pressure beneath a rigid footing resting on cohesive soil is (A) Less at edges compared to middle (B) More at edges compared to middle (C) Uniform throughout (D) None of the above

Last Answer : Answer: Option B

For a slab supported on its four edges with corners held down and loaded uniformly, the Marcus correction factor to the moments obtained by Grashoff Rankine's theory (A) Is always less than 1 (B) Is always greater than 1 (C) Can be more than 1 (D) Can be less than 1

Description : For a slab supported on its four edges with corners held down and loaded uniformly, the Marcus correction factor to the moments obtained by Grashoff Rankine's theory (A) Is always less than 1 (B) Is always greater than 1 (C) Can be more than 1 (D) Can be less than 1

Last Answer : Answer: Option A

To prevent movement of moisture from sub-grade to road pavement at the same level as that of water-table, thickness of a cut off layer of coarse sand, is (A) 15 cm (B) 20 cm (C) 30 cm (D) 45 cm

Description : To prevent movement of moisture from sub-grade to road pavement at the same level as that of water-table, thickness of a cut off layer of coarse sand, is (A) 15 cm (B) 20 cm (C) 30 cm (D) 45 cm

Last Answer : Answer: Option A

From any point on the surface with a given inclination (A) Only one contour gradient is possible (B) Two contour gradients are possible (C) Indefinite contour gradients are possible (D) All of the above

Description : From any point on the surface with a given inclination  (A) Only one contour gradient is possible  (B) Two contour gradients are possible  (C) Indefinite contour gradients are possible  (D) All of the above

Last Answer : (C) Indefinite contour gradients are possible 

An imaginary line lying throughout the surface of ground and preserving a constant inclination to the horizontal is known as (A) Contour line (B) Horizontal equivalent (C) Contour interval (D) Contour gradient

Description : An imaginary line lying throughout the surface of ground and preserving a constant inclination to the horizontal is known as (A) Contour line (B) Horizontal equivalent (C) Contour interval (D) Contour gradient

Last Answer : (D) Contour gradient

An imaginary line lying throughout on the surface of the earth and preserving a constant inclination to the horizontal, is called (A) Contour line (B) Contour gradient (C) Level line (D) Line of gentle scope

Description : An imaginary line lying throughout on the surface of the earth and preserving a constant inclination to the horizontal, is called (A) Contour line (B) Contour gradient (C) Level line (D) Line of gentle scope

Last Answer : (B) Contour gradient

If a cohesive soil specimen is subjected to a vertical compressive load, the inclination of the cracks to the horizontal is (A) 90° (B) 45° (C) 22.5° (D) 0

Description : If a cohesive soil specimen is subjected to a vertical compressive load, the inclination of the cracks to the horizontal is (A) 90° (B) 45° (C) 22.5° (D) 0

Last Answer : (B) 45°