According to Darcy's formula, the loss of head due to friction in the pipe is (where f = Darcy's coefficient, l = Length of pipe, v = Velocity of liquid in pipe, and d = Diameter of pipe) (A) flv²/2gd (B) flv²/gd (C) 3flv²/2gd (D) 4flv²/2gd

According to Darcy's formula, the loss of head due to friction in the pipe is (where f = Darcy's
coefficient, l = Length of pipe, v = Velocity of liquid in pipe, and d = Diameter of pipe)
(A) flv²/2gd
(B) flv²/gd
(C) 3flv²/2gd
(D) 4flv²/2gd
by

1 Answer

Answer :

Answer: Option D
by

Related questions

The loss of head due to viscosity for laminar flow in pipes is (where d = Diameter of pipe, l = Length of pipe, v w = Specific weight of the flowing liquid) (A) 4 (B) 8 (C) 16 (D) 32

Description : The loss of head due to viscosity for laminar flow in pipes is (where d = Diameter of pipe, l = Length of pipe, v w = Specific weight of the flowing liquid) (A) 4 (B) 8 (C) 16 (D) 32

Last Answer : Answer: Option D

To pump water from a water reservoir 3 m deep and maximum water level at 135 m, a pump is installed to lift water up to R.L. 175 m at a constant rate of 36,00,000 litres per hour. If the length of the pipe is 1506 m and f = 0.01, ignoring other minor losses and assuming the economical diameter from Lea's formula D = 1.2 Q, the water horse power of the pump is (A) 400 (B) 450 (C) 500(D) 600

Description : To pump water from a water reservoir 3 m deep and maximum water level at 135 m, a pump is  installed to lift water up to R.L. 175 m at a constant rate of 36,00,000 litres per hour. If the length  of the ... the water horse power of the pump is  (A) 400  (B) 450  (C) 500 (D) 600

Last Answer : (D) 600

The loss of head due to friction in a pipe of uniform diameter in which a viscous flow is taking place, is (where RN = Reynold number) (A) 1/RN (B) 4/RN (C) 16/RN (D) 64/RN

Description : The loss of head due to friction in a pipe of uniform diameter in which a viscous flow is taking place, is (where RN = Reynold number) (A) 1/RN (B) 4/RN (C) 16/RN (D) 64/RN

Last Answer : Answer: Option C

With the usual meanings of letters, the equation V = 400 I (D10²/4) is used for determining the velocity of ground water flow in metres per day. It is known as (A) Meinzer's formula (B) Slichter's formula (C) Darcy's formula (D) Hazen's formula

Description : With the usual meanings of letters, the equation V = 400 I (D10²/4) is used for determining the velocity of ground water flow in metres per day. It is known as (A) Meinzer's formula (B) Slichter's formula (C) Darcy's formula (D) Hazen's formula

Last Answer : Answer: Option B

The equation V = (1000 ID10²/60) × (1.8T + 42) which is used for determining the velocity of ground water flow in metres per day is known as (A) Meinzer's formula (B) Slichter's formula (C) Darcy's formula (D) Hazen formula

Description : The equation V = (1000 ID10²/60) × (1.8T + 42) which is used for determining the velocity of ground water flow in metres per day is known as (A) Meinzer's formula (B) Slichter's formula (C) Darcy's formula (D) Hazen formula

Last Answer : Answer: Option D

A compound pipe is required to be replaced by a new pipe. The two pipes are said to be equivalent, if (A) Length of both the pipes is same (B) Diameter of both the pipes is same (C) Loss of head and discharge of both the pipes is same (D) Loss of head and velocity of flow in both the pipes is same

Description : A compound pipe is required to be replaced by a new pipe. The two pipes are said to be equivalent, if (A) Length of both the pipes is same (B) Diameter of both the pipes is same (C) Loss of ... discharge of both the pipes is same (D) Loss of head and velocity of flow in both the pipes is same

Last Answer : Answer: Option C

The loss of head at entrance in a pipe is (where v = Velocity of liquid in the pipe) (A) v²/2g (B) 0.5v²/2g (C) 0.375v²/2g (D) 0.75v²/2g

Description : The loss of head at entrance in a pipe is (where v = Velocity of liquid in the pipe) (A) v²/2g (B) 0.5v²/2g (C) 0.375v²/2g (D) 0.75v²/2g

Last Answer : Answer: Option B

The loss of head at exit of a pipe is (where v = Velocity of liquid in the pipe) (A) v²/2g (B) 0.5v²/2g (C) 0.375v²/2g (D) 0.75v²/2g

Description : The loss of head at exit of a pipe is (where v = Velocity of liquid in the pipe) (A) v²/2g (B) 0.5v²/2g (C) 0.375v²/2g (D) 0.75v²/2g

Last Answer : Answer: Option A

Two pipe systems can be said to be equivalent, when the following quantities are same (A) Friction loss and flow (B) Length and diameter (C) Flow and length (D) Friction factor and diameter

Description : Two pipe systems can be said to be equivalent, when the following quantities are same (A) Friction loss and flow (B) Length and diameter (C) Flow and length (D) Friction factor and diameter

Last Answer : Answer: Option A

For determining the velocity of flow of underground water, the most commonly used non￾empirical formula is (A) Darcy's formula (B) Slichter's formula (C) Hazen's formula (D) Lacy's formula

Description : For determining the velocity of flow of underground water, the most commonly used non￾empirical formula is  (A) Darcy's formula  (B) Slichter's formula  (C) Hazen's formula  (D) Lacy's formula 

Last Answer : (A) Darcy's formula 

Consider two pipes of same length and diameter through which water is passed at the same velocity. The friction factor for rough pipe is f1 and that for smooth pipe is f2 . Pick out the correct statement(A) f1 = f2 (B) f1 < f2 (C) f1 > f2 (D) Data not sufficient to relate f1 & f2

Description : Consider two pipes of same length and diameter through which water is passed at the same velocity. The friction factor for rough pipe is f1 and that for smooth pipe is f2 . Pick out the correct statement. (A) f1 = f2 (B) f1 < f2 (C) f1 > f2 (D) Data not sufficient to relate f1 & f2

Last Answer : (C) f1 > f2

If the velocity of flow as well as the diameter of the flowing pipe are respectively doubled through a pipe system in use since long, the head loss will thereafter be (a) Halved (b) Doubled (c) Increased 4 times (d) No change

Description : If the velocity of flow as well as the diameter of the flowing pipe are respectively doubled through a pipe system in use since long, the head loss will thereafter be (a) Halved (b) Doubled (c) Increased 4 times (d) No change

Last Answer : (b) Doubled

Which of the following two quantities when same, makes one pipe system equivalent to another pipe system? (A) Head & discharge(B) Length & discharge(C) Length & diameter(D) Friction factor & diameter

Description : Which of the following two quantities when same, makes one pipe system equivalent to another pipe system? (A) Head & discharge (B) Length & discharge (C) Length & diameter (D) Friction factor & diameter

Last Answer : (A) Head & discharge

Pick up the incorrect statement from the following: (A) The rate of flow of water through a unit cross-sectional area under a unit hydraulic gradient, is called coefficient of permeability (B) The rate of flow of water through a vertical strip of the aquifer of unit width and full depth under a unit hydraulic gradient, is called coefficient of transmissibility (C) The flow of water through aquifers, is governed by the Darcy's law (D) The term 'transmissibility' was introduced by Meinzer

Description : Pick up the incorrect statement from the following: (A) The rate of flow of water through a unit cross-sectional area under a unit hydraulic gradient, is called coefficient of permeability (B) ... aquifers, is governed by the Darcy's law (D) The term 'transmissibility' was introduced by Meinzer

Last Answer : Answer: Option D

The head loss in turbulent flow in a pipe varies (A) Directly as the velocity (B) Inversely as the square of the velocity (C) Approximately as the square of the velocity (D) Inversely as the square of the diameter

Description : The head loss in turbulent flow in a pipe varies (A) Directly as the velocity (B) Inversely as the square of the velocity (C) Approximately as the square of the velocity (D) Inversely as the square of the diameter

Last Answer : (C) Approximately as the square of the velocity

The head loss in turbulent flow in a pipe varies (A) As velocity (B) As (velocity) 2 (C) Inversely as the square of diameter

Description : The head loss in turbulent flow in a pipe varies (A) As velocity (B) As (velocity) 2 (C) Inversely as the square of diameter

Last Answer : (B) As (velocity)

The head loss in turbulent flow in a pipe varies (A) As velocity (B) As (velocity) 2 (C) Inversely as the square of diameter

Description : The head loss in turbulent flow in a pipe varies (A) As velocity (B) As (velocity) 2 (C) Inversely as the square of diameter

Last Answer : (C) Inversely as the square of diameter

Power transmitted through a pipe is maximum when the loss of head due to friction is :

Description : Power transmitted through a pipe is maximum when the loss of head due to friction is : (A) one-half of the total head supplied (B) one-third of the total head supplied (C) one-fourth of the total head supplied (D) zero

Last Answer : Power transmitted through a pipe is maximum when the loss of head due to friction is : one-third of the total head supplied 

The head loss in turbulent flow in pipe is proportional to(where, V = velocity of fluid through the pipe) (A) V 2 (B) 1/V 2 (C) 1/V (D) V

Description : The head loss in turbulent flow in pipe is proportional to(where, V = velocity of fluid through the pipe) (A) V 2 (B) 1/V 2 (C) 1/V (D) V

Last Answer : (A) V

A compound pipe of diameter d1, d2 and d3 having lengths l1, l2 and l3 is to be replaced by an equivalent pipe of uniform diameter d and of the same length (l) as that of the compound pipe. The size of the equivalent pipe is given by (A) l/d² = + + (B) l/d³ = + ) + (C) = + + (D)

Description : A compound pipe of diameter d1, d2 and d3 having lengths l1, l2 and l3 is to be replaced by an equivalent pipe of uniform diameter d and of the same length (l) as that of the compound pipe. The size of the equivalent pipe is given by (A) l/d² = + + (B) l/d³ = + ) + (C) = + + (D)

Last Answer : Answer: Option D

The efficiency of power transmission through pipe is (where H = Total supply head, and hf = Head lost due to friction in the pipe) (A) (H - hf )/H (B) H/(H - hf ) (C) (H + hf )/H (D) H/(H + hf )

Description : The efficiency of power transmission through pipe is (where H = Total supply head, and hf = Head lost due to friction in the pipe) (A) (H - hf )/H (B) H/(H - hf ) (C) (H + hf )/H (D) H/(H + hf )

Last Answer : Answer: Option A

The power transmitted through the nozzle is maximum when the head lost due to friction in the pipe is __________ of the total supply head. (A) One-half (B) One-third (C) Two-third (D) None of these

Description : The power transmitted through the nozzle is maximum when the head lost due to friction in the pipe is __________ of the total supply head. (A) One-half (B) One-third (C) Two-third (D) None of these

Last Answer : Answer: Option B

The power transmitted through the pipe is maximum when the head lost due to friction is equal to (A) One-fourth of the total supply head (B) One-third of the total supply head (C) One-half of the total supply head (D) Two-third of the total supply head

Description : The power transmitted through the pipe is maximum when the head lost due to friction is equal to (A) One-fourth of the total supply head (B) One-third of the total supply head (C) One-half of the total supply head (D) Two-third of the total supply head

Last Answer : Answer: Option B

The energy loss over a length of pipeline according to Darcy-Weisbach equation for pipe flow is ___________ the mean velocity of flow. (A) Directly proportional to (B) Directly proportional to square of (C) Inversely proportional to (D) Inversely proportional to square of

Description : The energy loss over a length of pipeline according to Darcy-Weisbach equation for pipe flow is ___________ the mean velocity of flow. (A) Directly proportional to (B) Directly proportional to square of (C) Inversely proportional to (D) Inversely proportional to square of

Last Answer : (B) Directly proportional to square of

Which of the following is not the function of a volute casing provided in a centrifugal pump? (A) To reduce the head loss in discharge (B) To increase the pump efficiency (C) To collect liquid from the periphery of the impeller and to transmit it to the delivery pipe at constant velocity (D) To increase the pump discharge rate

Description : Which of the following is not the function of a volute casing provided in a centrifugal pump? (A) To reduce the head loss in discharge (B) To increase the pump efficiency (C) To collect liquid ... and to transmit it to the delivery pipe at constant velocity (D) To increase the pump discharge rate

Last Answer : Option D

If h is the loss due to friction in a pipe. Total losses in strainer and bends may be taken as (A) 0.01 h (B) 0.45 h (C) 0.20 h (D) 0.25 h

Description : If h is the loss due to friction in a pipe. Total losses in strainer and bends may be taken as (A) 0.01 h (B) 0.45 h (C) 0.20 h (D) 0.25 h

Last Answer : Answer: Option D

For turbulent flow in smooth circular pipe, the velocity distribution is a function of the distance 'd' measured from the wall of the pipe and the friction velocity 'v', and it follows a __________ relationship. (A) Logarithmic (B) Linear (C) Hyperbolic (D) Parabolic

Description : For turbulent flow in smooth circular pipe, the velocity distribution is a function of the distance 'd' measured from the wall of the pipe and the friction velocity 'v', and it follows a __________ relationship. (A) Logarithmic (B) Linear (C) Hyperbolic (D) Parabolic

Last Answer : (A) Logarithmic

The discharge Q = 2 /2.3 log10 (R/rw) for the confined tube well is obtained from (A) Thiem's formula (B) Darcy's formula (C) Tolman's formula (D) Dupuits formula

Description : The discharge Q = 2 /2.3 log10 (R/rw) for the confined tube well is obtained from  (A) Thiem's formula  (B) Darcy's formula  (C) Tolman's formula  (D) Dupuits formula 

Last Answer : (D) Dupuits formula 

Coefficient of contraction is the ratio of (A) Actual velocity of jet at vena contracta to the theoretical velocity (B) Loss of head in the orifice to the head of water available at the exit of the orifice (C) Loss of head in the orifice to the head of water available at the exit of the orifice (D) Area of jet at vena-contracta to the area of orifice

Description : Coefficient of contraction is the ratio of (A) Actual velocity of jet at vena contracta to the theoretical velocity (B) Loss of head in the orifice to the head of water available at the exit of the ... available at the exit of the orifice (D) Area of jet at vena-contracta to the area of orifice

Last Answer : Answer: Option D

Coefficient of resistance is the ratio of (A) Actual velocity of jet at vena-contracta to the theoretical velocity (B) Area of jet at vena-contracta to the area of orifice (C) Loss of head in the orifice to the head of water available at the exit of the orifice (D) Actual discharge through an orifice to the theoretical discharge

Description : Coefficient of resistance is the ratio of (A) Actual velocity of jet at vena-contracta to the theoretical velocity (B) Area of jet at vena-contracta to the area of orifice (C) Loss ... available at the exit of the orifice (D) Actual discharge through an orifice to the theoretical discharge

Last Answer : Answer: Option C

If the chosen diameter of a pipe, is less than the economical diameter (A) Cost of pipe will be less (B) Head loss will be high (C) Cost of pumping will be more than saving (D) All the above

Description : If the chosen diameter of a pipe, is less than the economical diameter  (A) Cost of pipe will be less  (B) Head loss will be high  (C) Cost of pumping will be more than saving  (D) All the above

Last Answer : (D) All the above

The coefficient of discharge for an external mouthpiece depends upon (A) Velocity of liquid (B) Pressure of liquid (C) Area of mouthpiece (D) Length of mouthpiece

Description : The coefficient of discharge for an external mouthpiece depends upon (A) Velocity of liquid (B) Pressure of liquid (C) Area of mouthpiece (D) Length of mouthpiece

Last Answer : Answer: Option D

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

State the Darcy’s law of permeability with expression. Hence define coefficient of permeability.

Description : State the Darcy’s law of permeability with expression. Hence define coefficient of permeability.

Last Answer : Darcy's law of permeability: It states that for laminar flow, the rate of flow or discharge per unit time is directly proportional to hydraulic gradient. Expression: q = KiA  / = Ki  V = Ki ... velocity of flow under a unit hydraulic gradient through a soil. Mathematically: K = V/i

The Bernoulli's equation is based on the assumption that (A) There is no loss of energy of the liquid flowing (B) The velocity of flow is uniform across any cross-section of the pipe (C) No force except gravity acts on the fluid (D) All of the above

Description : The Bernoulli's equation is based on the assumption that (A) There is no loss of energy of the liquid flowing (B) The velocity of flow is uniform across any cross-section of the pipe (C) No force except gravity acts on the fluid (D) All of the above

Last Answer : Answer: Option D

If G is the specific gravity of particles of diameter d, the velocity of settlement V in still water at T°C, according to Stoke's law, is (A) V = 418 (G - 1) d² [(3T + 70)/100] (B) V = 418 (G - 1) d [(3T - 70)/100] (C) V = 418 (G - 1) d² [(2T + 70)/100] (D) V = 418 (G - 1) d 4 [(3T + 70)/100]

Description : If G is the specific gravity of particles of diameter d, the velocity of settlement V in still water  at T°C, according to Stoke's law, is  (A) V = 418 (G - 1) d² [(3T + 70)/100]  (B) V = 418 (G - 1) d [(3T - ... 1) d² [(2T + 70)/100]  (D) V = 418 (G - 1) d 4  [(3T + 70)/100] 

Last Answer : (A) V = 418 (G - 1) d² [(3T + 70)/100] 

Which of the following statement is wrong? (A) A flow whose streamline is represented by a curve is called two dimensional flow. (B) The total energy of a liquid particle is the sum of potential energy, kinetic energy and pressure energy. (C) The length of divergent portion in a Venturimeter is equal to the convergent portion. (D) A pitot tube is used to measure the velocity of flow at the required point in a pipe.

Description : Which of the following statement is wrong? (A) A flow whose streamline is represented by a curve is called two dimensional flow. (B) The total energy of a liquid particle is the sum of potential energy, ... (D) A pitot tube is used to measure the velocity of flow at the required point in a pipe.

Last Answer : Answer: Option C

Which of the following statements is/are true for coulomb damping? 1. Coulomb damping occurs due to friction between two lubricated surfaces2. Damping force is opposite to the direction of motion of vibrating body 3. For smooth surfaces, coefficient of friction depends upon velocity 4. Damping force depends upon the rubbing velocity between two rubbing surfaces a. Only statement 1 b. Statement 2, 3 and statement 4 c. Only statement 2 d. All the above statements are true

Description : Which of the following statements is/are true for coulomb damping? 1. Coulomb damping occurs due to friction between two lubricated surfaces2. Damping force is opposite to the direction of motion of vibrating body ... 2, 3 and statement 4 c. Only statement 2 d. All the above statements are true

Last Answer : c. Only statement 2

If is the rugosity coefficient, is the bed slope of sewer, the velocity of flow in m/sec may be obtained by the formula V = (1/n) r2/3 s1/2 evolved by A. Chezy B. Manning C. Bazin D. Kutter

Description : If is the rugosity coefficient, is the bed slope of sewer, the velocity of flow in m/sec may be obtained by the formula V = (1/n) r2/3 s1/2 evolved by A. Chezy B. Manning C. Bazin D. Kutter

Last Answer : ANS: B

When a liquid moves through a pipe having a varying diameter, the pressure against the inside walls of the pipe will be: w) the same throughout x) lowest where the diameter is smallest y) lowest where the diameter is largest z) lowest where the velocity of flow is lowest

Description : When a liquid moves through a pipe having a varying diameter, the pressure against the inside walls of the pipe will be: w) the same throughout x) lowest where the diameter is smallest y) lowest where the diameter is largest z) lowest where the velocity of flow is lowest 

Last Answer : ANSWER: X -- LOWEST WHERE THE DIAMETER IS SMALLEST

If C is basic capacity per lane, V is velocity in km/hour, S is stopping distance plus length of the vehicles in metres, the formula C = 1000V/S is applicable to (A) District roads (B) Two lane roads (C) Two lane roads in one direction (D) None of these

Description : If C is basic capacity per lane, V is velocity in km/hour, S is stopping distance plus length of the vehicles in metres, the formula C = 1000V/S is applicable to (A) District roads (B) Two lane roads (C) Two lane roads in one direction (D) None of these

Last Answer : Answer: Option C

In case of a pipe exit fitted with a nozzle, the (A) Conversion of kinetic head to pressure head is facilitated (B) Conversion of pressure head to kinetic head is facilitated (C) Power transmitted through the nozzle is maximum, when the head lost due to friction in the pipe is equal to one third of the total supply head (D) Both (B) and (C)

Description : In case of a pipe exit fitted with a nozzle, the (A) Conversion of kinetic head to pressure head is facilitated (B) Conversion of pressure head to kinetic head is facilitated (C) Power transmitted through the nozzle ... in the pipe is equal to one third of the total supply head (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

For laminar flow of Newtonian fluids through a circular pipe, for a given pressure drop and length & diameter of pipe, the velocity of fluid is proportional to (where, μ = fluid viscosity ) (A) μ (B) 1/μ (C) √μ (D) 1/√μ

Description : For laminar flow of Newtonian fluids through a circular pipe, for a given pressure drop and length & diameter of pipe, the velocity of fluid is proportional to (where, μ = fluid viscosity ) (A) μ (B) 1/μ (C) √μ (D) 1/√μ

Last Answer : (B) 1/μ

Transition from laminar flow to turbulent flow in fluid flow through a pipe does not depend upon the (A) Length of the pipe (B) Diameter of the pipe (C) Density of the fluid (D) Velocity of the fluid

Description : Transition from laminar flow to turbulent flow in fluid flow through a pipe does not depend upon the (A) Length of the pipe (B) Diameter of the pipe (C) Density of the fluid (D) Velocity of the fluid

Last Answer : (A) Length of the pipe

Major loss in sudden contraction in pipe flow is due to (A) Boundary friction (B) Flow contraction (C) Expansion of flow after sudden contraction (D) None of these

Description : Major loss in sudden contraction in pipe flow is due to (A) Boundary friction (B) Flow contraction (C) Expansion of flow after sudden contraction (D) None of these

Last Answer : (B) Flow contraction

09. The loss of head due to an obstruction in a pipe is twice the loss of head at its entrance. A) Agree B) Disagree

Description : 09. The loss of head due to an obstruction in a pipe is twice the loss of head at its entrance. A) Agree B) Disagree

Last Answer : A

Two piping system are said to be equivalent, when the __________ are same. (A) Fluid flow rate & friction loss (B) Length & friction factor (C) Diameter & friction factor (D) Length & diameter

Description : Two piping system are said to be equivalent, when the __________ are same. (A) Fluid flow rate & friction loss (B) Length & friction factor (C) Diameter & friction factor (D) Length & diameter

Last Answer : (A) Fluid flow rate & friction loss

For calculation of economical diameter D of a pipe in metres for a discharge Q to be pumped in cumecs, Lea suggested the empirical formula (A) D = 0.22 Q (B) D = 1.22 Q (C) D = 2.22 Q (D) D = 3.22 Q

Description : For calculation of economical diameter D of a pipe in metres for a discharge Q to be pumped in  cumecs, Lea suggested the empirical formula  (A) D = 0.22 Q (B) D = 1.22 Q (C) D = 2.22 Q (D) D = 3.22 Q

Last Answer : (B) D = 1.22 Q