w k intensity at that point will be (A) h (B) wh (C) w/h (D) h/w

w k
intensity at that point will be
(A) h
(B) wh
(C) w/h
(D) h/w
by

1 Answer

Answer :

Answer: Option B
by

Related questions

The pressure intensity in kN/m2 (or kPa) at any point in a liquid is (where w = Specific weight of liquid, and h = Depth of liquid from the surface) (A) w (B) wh (C) w/h (D) h/w

Description : The pressure intensity in kN/m2 (or kPa) at any point in a liquid is (where w = Specific weight of liquid, and h = Depth of liquid from the surface) (A) w (B) wh (C) w/h (D) h/w

Last Answer : Answer: Option B

The water pressure per metre length on a vertical masonry wall of dam is (where w = Specific weight of the liquid, and H = Height of the liquid) (A) wH/2(B) wH (C) wH2 /2 (D) wH2 /4

Description : The water pressure per metre length on a vertical masonry wall of dam is (where w = Specific weight of the liquid, and H = Height of the liquid) (A) wH/2 (B) wH (C) wH2 /2 (D) wH2 /4

Last Answer : Answer: Option C

A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall per unit length is (where w = Specific weight of liquid, and H = Height of liquid) (A) wH (B) wH/2 (C) wH2 /2 (D) wH2 /3

Description : A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall per unit length is (where w = Specific weight of liquid, and H = Height of liquid) (A) wH (B) wH/2 (C) wH2 /2 (D) wH2 /3

Last Answer : Answer: Option C

Engineering news formula for obtaining safe bearing capacity of pile for drop hammer, is, (A) Q = Wh/6 (S + 2.5) (B) Q = Wh/2.5 (S + 6) (C) Q = (W × 6)/h (S + 2.5) (D) Q = (W × 2.5)/6 (S + h)

Description : Engineering news formula for obtaining safe bearing capacity of pile for drop hammer, is, (A) Q = Wh/6 (S + 2.5) (B) Q = Wh/2.5 (S + 6) (C) Q = (W × 6)/h (S + 2.5) (D) Q = (W × 2.5)/6 (S + h)

Last Answer : Answer: Option A

If is the angle of repose of soil of weight w kg/m3 , the horizontal pressure p at a depth of h metres per metre length of wall, is (A) wh × [(1 - sin )/(1 + )] (B) (wh/2) × [(1 - sin )/(1 + )] (C) wh - sin )/(1 + )] (D) wh )/(1 - )

Description : If is the angle of repose of soil of weight w kg/m3 , the horizontal pressure p at a depth of h metres per metre length of wall, is (A) wh × [(1 - sin )/(1 + )] (B) (wh/2) × [(1 - sin )/(1 + )] (C) wh - sin )/(1 + )] (D) wh )/(1 - )

Last Answer : Answer: Option A

A son went to his father's house and knocked on the door. When his father answered the door, the son said, 'O.K., today is the day I promised to burn your house to the ground.' 'But I built the house in 1941 with my own two hands. It has a lot of sentimental value, and is still very useful to me,' replied the father. 'Too bad,' said the son, 'but I have always loathed it, especially in the wintertime, and I grew to especially hate it since you added that second hole to it when you built the addition to the house when I was a teenager.' 'But if you burn the house down, where will I go?' asked the father. 'You will just have to go where most people go in these modern times,' answered the son. 'Well, I guess you're right,' said his father. The son then promptly escorted his father outside, wh

Description : A son went to his father's house and knocked on the door. When his father answered the door, the son said, 'O.K., today is the day I promised to burn your house to the ground.' 'But I ... 'Well, I guess you're right,' said his father. The son then promptly escorted his father outside, wh -Riddles

Last Answer : The father, although he owned a fully functioning home, had never been able to break himself from the habit of going to the bathroom in the Outhouse he had built for his family back in 1941. The son, ... the son had been trying for some time to get his father to agree to let him burn it down.

Would Trump’s brand of politics help in putting another Republican in the WH or not?

Description : Would Trump’s brand of politics help in putting another Republican in the WH or not?

Last Answer : I freaking hope NOT! But again the right can be unpredictable ,and bat shit crazy at times.

What is the cheapest rechargeable AA per ACTUAL Wh not claimed capacity.

Description : What is the cheapest rechargeable AA per ACTUAL Wh not claimed capacity.

Last Answer : answer:NiMH is what you want. NiCads are cheaper but lack capacity, and anything Lithium is relatively expensive by any metric.

How many Wh of heat does each Hot Hands packet offer?

Description : How many Wh of heat does each Hot Hands packet offer?

Last Answer : answer:I do not have the absolute scientific answer for you but I do have a subjective one that might help others answer your question. First I commend you for asking the question in the form ... $0.00084 = ~ 0.1 cents Batteries and chemical heaters are very expensive when compared with electricity.

title : wh- question

Description : title : wh- question

Last Answer : WH-question is also called question word . These interrogative words contain the letters " W" and " H" . That is why they are called wh-question .

The ratio of the monthly earnings of A and B is ` 3 : 2` . The ratio of the monthly expenditures of A and B is ` 4 : 3` A saves Rs. 300 each month. Wh

Description : The ratio of the monthly earnings of A and B is ` 3 : 2` . The ratio of the monthly expenditures of A and B is ` 4 : 3` A saves Rs. 300 each month. Wh

Last Answer : The ratio of the monthly earnings of A and B is ` 3 : 2` . The ratio of the monthly expenditures of A and B ... (in Rs.) A. 180 B. 195 C. 165 D. 205

The length of a wire of a potentiometer is 100 cm, and the e.m.f. of its standard cell is E volt. It is employed to measure the e.m.f. of a battery wh

Description : The length of a wire of a potentiometer is 100 cm, and the e.m.f. of its standard cell is E volt. It is employed to measure the e.m.f. of a battery wh

Last Answer : The length of a wire of a potentiometer is 100 cm, and the e.m.f. of its standard cell is E ... current in the potentiometer wire D. `(30E)/(100)`

I need help with finding out wh sent a bill to collections for my husband. On my credit report it shows Medical payment data. Marie?

Description : I need help with finding out wh sent a bill to collections for my husband. On my credit report it shows Medical payment data. Marie?

Last Answer : You can contact any of the 3 major credit bureaus to find out more information on the medical payment that was late.

i need help with finding out wh sent a bill to collections for my husband. On my credit report it shows Medical payment data.?

Description : i need help with finding out wh sent a bill to collections for my husband. On my credit report it shows Medical payment data.?

Last Answer : Contact the credit reporting agency that issued the report and challenge the entry. Tell them you have no idea what it represents or who it is from. They will research the item. Many credit reports have incorrect information on them. It pays to check them frequently. Good Luck.

The carbon atom wh ich becomes asymmetric when the straight chain form of monosaccharide changes into ring form is known as CARBOHYDRATES AND CARBOHYDRATE METABOLISM 9 (A) Anomeric carbon atom (B) Epimeric carbon atom (C) Isomeric carbon atom (D) None of these

Description : The carbon atom wh ich becomes asymmetric when the straight chain form of monosaccharide changes into ring form is known as CARBOHYDRATES AND CARBOHYDRATE METABOLISM 9 (A) Anomeric carbon atom (B) Epimeric carbon atom (C) Isomeric carbon atom (D) None of these

Last Answer : A

Marketing effo ing efforts, wh rts, which incl ich include publi ude public health ca c health campaigns to reduc ns to reduce smoki e smoking, alcoh ng, alcoholism, drug abuse, and overeating are called _____. a. specialty product b. social marketing social marketing c. shopping product

Description : Marketing effo ing efforts, wh rts, which incl ich include publi ude public health ca c health campaigns to reduc ns to reduce smoki e smoking, alcoh ng, alcoholism, drug abuse, and overeating are called _____. a. specialty product b. social marketing social marketing c. shopping product

Last Answer : b. social marketing social marketing

Botanical Words Alphabetical List - WH

Description : Botanical Words Alphabetical List - WH

Last Answer : WHORL: Where three or more organs, such as leaves or petals, arise from the same point and form a circle around it.

Name the 5 elements of the periodic classification wh comprise the Carbon Group.

Description : Name the 5 elements of the periodic classification wh comprise the Carbon Group.

Last Answer : ANSWER: CARBON, SILICON, GERMANIUM, TIN AND LEAD

I will be describing a chemical element. Try to identify it with the fewest number of clues. This element is a halogen wh is a liquid at standard conditions. The element volatilizes readily at ro temperature to form a reddish vapor which is very irritating to the eyes a flesh. The atomic number of this element is 35 and its chemical symbol is Br. Name this element.

Description : I will be describing a chemical element. Try to identify it with the fewest number of clues. This element is a halogen wh is a liquid at standard conditions. The element volatilizes readily at ro ... . The atomic number of this element is 35 and its chemical symbol is Br. Name this element.

Last Answer : ANSWER: BROMINE

Maximum heat dissipation occurs from a steel wire (k = 0.5 W/m. k) of 15 mm diameter exposed to air (h = 20W/m2.k), when the insulation thickness is __________ mm. (A) 15 (B) 25 (C) 10 (D) 30

Description : Maximum heat dissipation occurs from a steel wire (k = 0.5 W/m. k) of 15 mm diameter exposed to air (h = 20W/m2.k), when the insulation thickness is __________ mm. (A) 15 (B) 25 (C) 10 (D) 30

Last Answer : (B) 25

Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water?  A. 0.043 K/s  B. 0.179 K/s  C. 0.357 K/s  D. 1.50 K/s Formula: Q = mcv ( T)

Description : Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water?  A. 0.043 K/s  B. 0.179 K/s  C. 0.357 K/s  D. 1.50 K/s Formula: Q = mcv ( T)

Last Answer : 0.179 K/s

The inventor of the Kelvin temperature scale was: w) K. Cavendish II x) **** William H. Harrison y) Sir William Thomson z) none of the above

Description : The inventor of the Kelvin temperature scale was: w) K. Cavendish II x) Lord William H. Harrison y) Sir William Thomson z) none of the above

Last Answer : ANSWER: Y -- SIR WILLIAM THOMSON

If Nf , Nd and H are total number flow channels, total number of potential drops and total hydraulic head differences respectively, the discharge q through the complete flow is given by (where K is a constant) (A) q = (Nf/Nd) (B) q = KH (Nd/(Nf ) (C) q = KH (Nf/Nd) (D) q = KH Nf/Nd)

Description : If Nf , Nd and H are total number flow channels, total number of potential drops and total hydraulic head differences respectively, the discharge q through the complete flow is given by (where K is a constant) (A) q = (Nf/Nd) (B) q = KH (Nd/(Nf ) (C) q = KH (Nf/Nd) (D) q = KH Nf/Nd)

Last Answer : Answer: Option C

In a shaft shear stress intensity at a point is not (A) Directly proportional to the distance from the axis (B) Inversely proportional to the distance from the axis (C) Inversely proportional to the polar moment of inertia (D) Directly proportional to the applied torque

Description : In a shaft shear stress intensity at a point is not (A) Directly proportional to the distance from the axis (B) Inversely proportional to the distance from the axis (C) Inversely proportional to the polar moment of inertia (D) Directly proportional to the applied torque

Last Answer : (B) Inversely proportional to the distance from the axis

The intensity of direct longitudinal stress in the cross-section at any point distant r from the neutral axis, is proportional to (A) r (B) 1/r (C) r2 (D) 1/r²

Description : The intensity of direct longitudinal stress in the cross-section at any point distant r from the neutral axis, is proportional to (A) r (B) 1/r (C) r2 (D) 1/r²

Last Answer : (A) r

The intensity of vertical pressure at a depth directly below the point load on its axis of loading is: (A) 0.4775 Q/Z (B) 0.4775 Q/Z² (C) 0.4775 Q/Z3 (D) 0.4775 Q Z

Description : The intensity of vertical pressure at a depth directly below the point load on its axis of loading is: (A) 0.4775 Q/Z (B) 0.4775 Q/Z² (C) 0.4775 Q/Z3 (D) 0.4775 Q Z

Last Answer : (B) 0.4775 Q/Z²

01. When the pressure intensity at a point is less than the local atmospheric pressure, then the difference of these two pressures is called vacuum pressure. A) Agree B) Disagree

Description : 01. When the pressure intensity at a point is less than the local atmospheric pressure, then the difference of these two pressures is called vacuum pressure. A) Agree B) Disagree

Last Answer : Option A

When the pressure intensity at a point is more than the local atmospheric pressure, then the difference of these two pressures is called (A) Gauge pressure (B) Absolute pressure (C) Positive gauge pressure (D) Vacuum pressure

Description : When the pressure intensity at a point is more than the local atmospheric pressure, then the difference of these two pressures is called (A) Gauge pressure (B) Absolute pressure (C) Positive gauge pressure (D) Vacuum pressure

Last Answer : Answer: Option C

The intensity of pressure at any point, in a liquid, is (A) Directly proportional to the area of the vessel containing liquid (B) Directly proportional to the depth of liquid from the surface (C) Directly proportional to the length of the vessel containing liquid (D) Inversely proportional to the depth of liquid from the surface

Description : The intensity of pressure at any point, in a liquid, is (A) Directly proportional to the area of the vessel containing liquid (B) Directly proportional to the depth of liquid from the ... length of the vessel containing liquid (D) Inversely proportional to the depth of liquid from the surface

Last Answer : Answer: Option B

The intensity of pressure at any point, in a liquid, is __________ to the depth of liquid from the surface. (A) Equal (B) Directly proportional (C) Inversely proportional (D) None of these

Description : The intensity of pressure at any point, in a liquid, is __________ to the depth of liquid from the surface. (A) Equal (B) Directly proportional (C) Inversely proportional (D) None of these

Last Answer : Answer: Option B

In electromagnetic waves, the electric field will be perpendicular to which of the following? a) Magnetic field intensity b) Wave propagation c) Both H and wave direction d) It propagates independently

Description : In electromagnetic waves, the electric field will be perpendicular to which of the following? a) Magnetic field intensity b) Wave propagation c) Both H and wave direction d) It propagates independently

Last Answer : c) Both H and wave direction

1.0 molal aqueous solution of an electrolyte `"A"_(2)"B"_(3)` is 60% ionised. The boiling point of the solution at 1 atm is `("K"_("b"("H"_(2)"O"))=0.

Description : 1.0 molal aqueous solution of an electrolyte `"A"_(2)"B"_(3)` is 60% ionised. The boiling point of the solution at 1 atm is `("K"_("b"("H"_(2)"O"))=0.

Last Answer : 1.0 molal aqueous solution of an electrolyte `"A"_(2)"B"_(3)` is 60% ionised. The boiling point of the solution at ... C. `376. 4 K` D. ` 374 . 76 K`

The total current density is given as 0.5i + j – 1.5k units. Find the curl of the magnetic field intensity. a) 0.5i – 0.5j + 0.5k b) 0.5i + j -1.5k c) i – j + k d) i + j – k

Description : The total current density is given as 0.5i + j – 1.5k units. Find the curl of the magnetic field intensity. a) 0.5i – 0.5j + 0.5k b) 0.5i + j -1.5k c) i – j + k d) i + j – k

Last Answer : b) 0.5i + j -1.5k

Find the magnetic field intensity when the magnetic vector potential x i + 2y j + 3z k. a) 6 b) -6 c) 0 d) 1

Description : Find the magnetic field intensity when the magnetic vector potential x i + 2y j + 3z k. a) 6 b) -6 c) 0 d) 1

Last Answer : b) -6

The magnetic field intensity at the centre of a current carrying coil of diameter J m is K. The current flowing

Description : The magnetic field intensity at the centre of a current carrying coil of diameter J m is K. The current flowing in the coil is

Last Answer : The magnetic field intensity at the centre of a current carrying coil of diameter d m is H. The current flowing in the coil is dH

If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the total head, the required water horse power of the pump, is (A) wQH/15 (B) wQH/360 (C) wQH/220 (D) wQH/550

Description : If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the total head, the required water horse power of the pump, is (A) wQH/15 (B) wQH/360 (C) wQH/220 (D) wQH/550

Last Answer : (A) wQH/15

An isolated load W is acting at a distance a from the left hand support, of a three hinged arch of span 2l and rise h hinged at the crown, the horizontal reaction at the support, is (A) Wa/h (B) Wa/2h(C) 2W/ha(D) 2h/W

Description : An isolated load W is acting at a distance a from the left hand support, of a three hinged arch of  span 2l and rise h hinged at the crown, the horizontal reaction at the support, is  (A) Wa/h  (B) Wa/2h (C) 2W/ha (D) 2h/W

Last Answer : (B) Wa/2h

If a three hinged parabolic arch, (span l, rise h) is carrying a uniformly distributed load w/unit length over the entire span, (A) Horizontal thrust is wl2 /8h (B) S.F. will be zero throughout (C) B.M. will be zero throughout (D) All the above

Description : If a three hinged parabolic arch, (span l, rise h) is carrying a uniformly distributed load w/unit  length over the entire span,  (A) Horizontal thrust is wl2 /8h (B) S.F. will be zero throughout  (C) B.M. will be zero throughout  (D) All the above 

Last Answer : (D) All the above 

According to Rankine's formula, the minimum depth of foundation (A) h = (P/W) [(1 - sin )/(1 + sin )]² (B) h = (w/P) [(1 - sin )/(1 + sin )]² (C) h = (P/w) [(1 - sin )/(1 + tan )]² (D) h = (P/w) [(1 - tan )/(1 + tan )]²

Description : According to Rankine's formula, the minimum depth of foundation (A) h = (P/W) [(1 - sin )/(1 + sin )]² (B) h = (w/P) [(1 - sin )/(1 + sin )]² (C) h = (P/w) [(1 - sin )/(1 + tan )]² (D) h = (P/w) [(1 - tan )/(1 + tan )]²

Last Answer : Answer: Option A

If a bent tendon is required to balance a concentrated load W at the centre of the span L, the central dip h must be at least (A) WL/P (B) WL/2P (C) WL/3P (D) WL/4P

Description : If a bent tendon is required to balance a concentrated load W at the centre of the span L, the central dip h must be at least (A) WL/P (B) WL/2P (C) WL/3P (D) WL/4P

Last Answer : Answer: Option D

A pre-stressed rectangular beam which carries two concentrated loads W at L/3 from either end, is provided with a bent tendon with tension P such that central one-third portion of the tendon remains parallel to the longitudinal axis, the maximum dip h is (A) WL/P (B) WL/2P (C) WL/3P (D) WL/4P

Description : A pre-stressed rectangular beam which carries two concentrated loads W at L/3 from either end, is provided with a bent tendon with tension P such that central one-third portion of the tendon remains parallel to the longitudinal axis, the maximum dip h is (A) WL/P (B) WL/2P (C) WL/3P (D) WL/4P

Last Answer : Answer: Option C

149 The power transmitted through a pipe is (where w = Specific weight in N/m3 , and Q = Discharge in m 3 /s) (A) w × Q × H (B) w × Q × hf (C) w × Q (H - hf ) (D) w × Q (H + hf )

Description : 149 The power transmitted through a pipe is (where w = Specific weight in N/m3 , and Q = Discharge in m 3 /s) (A) w × Q × H (B) w × Q × hf (C) w × Q (H - hf ) (D) w × Q (H + hf )

Last Answer : Answer: Option C

The theory of infiltration capacity was given by (A) Merrill Bernard (B) W.W. Horner (C) Le-Roy K. Shermen (D) Robert E. Horten

Description : The theory of infiltration capacity was given by (A) Merrill Bernard (B) W.W. Horner (C) Le-Roy K. Shermen (D) Robert E. Horten

Last Answer : Answer: Option D

Unit Hydrograph theory was enunciated by (A) Merril Bernard (B) W.W. Horner (C) Le-Roy K. Shermen (D) Robert E. Horten

Description : Unit Hydrograph theory was enunciated by (A) Merril Bernard (B) W.W. Horner (C) Le-Roy K. Shermen (D) Robert E. Horten

Last Answer : Answer: Option C

For the safety and comfort of factory workers, the sound-intensity level in a certain factory must remain below 85 dB. What is the maximum sound intensity allowed in this factory? A. 3.2 x 10-4 W/m2 B. 3.2 x 10-6 W/m2 C. 3.2 x 10-10 W/m2 D. 3.2 x 10-3 W/m2

Description : For the safety and comfort of factory workers, the sound-intensity level in a certain factory must remain below 85 dB. What is the maximum sound intensity allowed in this factory? A. 3.2 x 10-4 W/m2 B. 3.2 x 10-6 W/m2 C. 3.2 x 10-10 W/m2 D. 3.2 x 10-3 W/m2

Last Answer : A. 3.2 x 10-4 W/m2

ECE Board Exam March 1996 A car horn outdoors produces a sound intensity level of 90 dB at 10 ft away. At this distance, what is the sound power in watt? A. 12 W B. 0.12 W C. 0.012 W D. 1.2 W

Description : ECE Board Exam March 1996 A car horn outdoors produces a sound intensity level of 90 dB at 10 ft away. At this distance, what is the sound power in watt? A. 12 W B. 0.12 W C. 0.012 W D. 1.2 W

Last Answer : C. 0.012 W

Punjab has farm power ok intensity of ...... a. 200 W/ hector. c) 150 kW/hector b. 3.5 kW/hector d) 3.5 W/hector

Description : Punjab has farm power ok intensity of ...... a. 200 W/ hector. c) 150 kW/hector b. 3.5 kW/hector d) 3.5 W/hector

Last Answer : 3.5 kW/hector

When a certain beam of light falls upon a metal surface, it ejects photoelectrons from it. The number of photoelectrons ejected per second by the beam of light depends upon one of the following. Is it proportional to: w) the threshold frequency of the metal x) the work function of the metal y) the frequency of the beam z) the intensity of the beam

Description : When a certain beam of light falls upon a metal surface, it ejects photoelectrons from it. The number of photoelectrons ejected per second by the beam of light depends upon one of the following. Is it ... the work function of the metal y) the frequency of the beam z) the intensity of the beam

Last Answer : ANSWER: Z -- THE INTENSITY OF THE BEAM

The energy associated with one photon of a light beam is proportional to one of the following. Is it proportional to: w) the intensity of the light source from which it came x) the number of photons in the beam y) the frequency of the photon z) the speed of the photon

Description : The energy associated with one photon of a light beam is proportional to one of the following. Is it proportional to: w) the intensity of the light source from which it came x) the number of photons in the beam y) the frequency of the photon z) the speed of the photon

Last Answer : ANSWER: Y -- THE FREQUENCY OF THE PHOTON

For an electromagnetic wave traveling in a vacuum, if the magnitude of the intensity of the E field is zero, the magnitude of the intensity of the B field is: w) zero x) a negative maximum y) a positive maximum z) the square root of 2 times the positive maximum

Description : For an electromagnetic wave traveling in a vacuum, if the magnitude of the intensity of the E field is zero, the magnitude of the intensity of the B field is: w) zero x) a negative maximum y) a positive maximum z) the square root of 2 times the positive maximum

Last Answer : ANSWER: W -- ZERO