Description : According to principle of moments (A) If a system of coplanar forces is in equilibrium, then their algebraic sum is zero (B) If a system of coplanar forces is in equilibrium, then the ... of their resultant about the same point (D) Positive and negative couples can be balanced
Last Answer : (C) The algebraic sum of the moments of any two forces about any point is equal to moment of their resultant about the same point
Description : The forces, which meet at one point, but their lines of action do not lie in a plane, are called (A) Coplanar non-concurrent forces (B) Non-coplanar concurrent forces (C) Non-coplanar non-concurrent forces (D) Intersecting forces
Last Answer : (B) Non-coplanar concurrent forces
Description : The necessary condition for the forces acting on a body to be in equilibrium is that these should be a.In the same direction b.Coplaner c.Similar in nature d.Should not meet at a point e.(B) and (D) above
Last Answer : e. (B) and (D) above
Description : The forces which meet at one point but their lines of action do not lie in one plane, are called a.Coplanar noncurrent forces b.Non-coplanar nonconcurrent forces c.Intersecting forces d.Coplanar concurrent forces e.
Last Answer : c. Non-coplanar nonconcurrent forces
Description : If a rigid body is in equilibrium under the action of three forces, then (A) These forces are equal (B) The lines of action of these forces meet in a point (C) The lines of action of these forces are parallel (D) Both (B) and (C) above
Last Answer : (D) Both (B) and (C) above
Description : Forces are called coplanar when all of them acting on body lie in (A) One point (B) One plane (C) Different planes (D) Perpendicular planes
Last Answer : (B) One plane
Description : The necessary condition of equilibrium of a body is a.The algebraic sum of horizontal components of all forces must be zero b.The algebraic sum of vertical components of all forces must be zero c.The algebraic sum of forces about a point must be zero d.All the above e.None of the above
Last Answer : d. All the above
Description : If three forces acting in one plane upon a rigid body, keep it in equilibrium, then they must either (A) Meet in a point (B) Be all parallel (C) At least two of them must meet (D) All the above are correct
Last Answer : (D) All the above are correct
Description : A rigid body is in equilibrium under the action of these forces when a.These forces are equal b.The lines of action of these forces are parallel c.The lines of action of these forces meet in a point d.(A) and (B) above e.(B) and (C) above
Last Answer : e. (B) and (C) above
Description : When trying to turn a key into a lock, following is applied (A) Coplanar force (B) Non-coplanar forces (C) Couple (D) Moment
Last Answer : (C) Couple
Description : A number of forces acting at a point will be in equilibrium if (A) Their total sum is zero (B) Two resolved parts in two directions at right angles are equal (C) Sum of resolved parts in any two perpendicular directions are both zero (D) All of them are inclined equally
Last Answer : (C) Sum of resolved parts in any two perpendicular directions are both zero
Last Answer : Forces are called coplanar when all of them acting on body lie in one plane.
Description : Two coplanar couples having equal and opposite moments (A) Balance each other (B) Produce a couple and an unbalanced force (C) Are equivalent (D) Produce a moment of couple
Last Answer : (D) Produce a moment of couple
Description : The necessary condition for phase equilibrium in a multiphase system of N components is that the (A) Chemical potentials of a given component should be equal in all phases (B) Chemical potentials of all ... potentials of any given component in all the phases should be the same (D) None of these
Last Answer : (A) Chemical potentials of a given component should be equal in all phases
Description : Which of the following is a necessary characteristic for electrons that share an s orbital? w) coplanar spins x) parallel spins y) opposite spins z) none of these
Last Answer : ANSWER: Y -- OPPOSITE SPINS
Description : A member is balanced at its end by two inclined members carrying equal forces. For equilibrium the angle between the inclined bars must be (A) 3° (B) 45° (C) 90° (D) 120°
Last Answer : (D) 120°
Description : two forces acting at a joint are not along the straight line, then for the equilibrium of the joint (A) One of the forces must be zero (B) Each force must be zero (C) Forces must be equal and of the same sign (D) Forces must be equal in magnitude but opposite in sign
Last Answer : (B) Each force must be zero
Description : According to law of triangle of forces (A) Three forces acting at a point will be in equilibrium (B) Three forces acting at a point can be represented by a triangle, each side ... point are in equilibrium, each force is proportional to the sine of the angle between the other two
Last Answer : (C) If three forces acting upon a particle are represented in magnitude and direction by the sides of a triangle, taken in order, they will be in equilibrium
Description : Which is the correct statement about law of polygon of forces? (A) If any number of forces acting at a point can be represented by the sides of a polygon taken in order, then the ... direction and magnitude by the sides of a polygon taken in order, then the forces are in equilibrium
Last Answer : (D) If any number of forces acting at a point can be represented in direction and magnitude by the sides of a polygon taken in order, then the forces are in equilibrium
Description : According to Lami's theorem (A) Three forces acting at a point will be in equilibrium (B) Three forces acting at a point can be represented by a triangle, each side being proportional to ... point are in equilibrium, each force is proportional to the sine of the angle between the other two
Last Answer : Answer: Option D
Description : A solid is shown in the figure below. The vertices ABCDEFGH form a 4 cm × 2 cm × 2 cm cuboid. The segments AI and DI are both of length 5 cm, and points ICGFB are coplanar. What is the height (in cm) of point I from the base rectangle EFGH?
Last Answer : 4.80-4.84
Description : Forces are called concurrent when their lines of action meet in (A) One point (B) Two points (C) Plane (D) Perpendicular planes
Last Answer : (A) One point
Description : The center of pressure of a surface subjected to fluid pressure is the point (A) On the surface at which resultant pressure acts (B) On the surface at which gravitational force acts (C) At which all hydraulic forces meet (D) Similar to metacentre
Last Answer : Answer: Option A
Description : Buoyant force is (A) Resultant force acting on a floating body (B) Equal to the volume of liquid displaced (C) Force necessary to keep a body in equilibrium (D) The resultant force on a body due to the fluid surrounding it
Description : Buoyant force is (A) The resultant force acting on a floating body (B) The resultant force on a body due to the fluid surrounding it (C) Equal to the volume of liquid displaced (D) The force necessary to maintain equilibrium of a submerged body
Last Answer : Answer: Option B
Description : The equilibrium equation for the condition that tension will be equal to the compression is given by [ A ] Compression in concrete = Tension in steel [ B ] Compression in concrete + Compression in steel = Tension in steel [ C ] Compression in concrete = Compression in steel [ D ] None of the above
Last Answer : [ B ] Compression in concrete + Compression in steel = Tension in steel
Description : Two coplanar couples having equal and opposite moments
Last Answer : Two coplanar couples having equal and opposite moments can not balance each other.
Description : The necessary and sufficient condition for equilibrium between two phases is (A) The concentration of each component should be same in the two phases (B) The temperature of each phase should be same ( ... the two phases (D) The chemical potential of each component should be same in the two phases
Last Answer : (D) The chemical potential of each component should be same in the two phases
Description : A number of forces acting at a point will be in equilibrium if a.Sum of the forces is zero b.Algebraic sum of the forces is zero c.Sum of the resolved parts in any two perpendicular directions are both zero d.None of the above e.The metacentre of the body
Last Answer : d. None of the above
Description : Which of the following conditions is to be satisfied both in elastic and plastic analyses? (a) Equilibrium condition (b) Yield condition (c ) Plastic moment condition (d) Mechanism condition
Last Answer : (a) Equilibrium condition
Description : If three forces acting in different planes can be represented by a triangle, these will be in (A) Non-equilibrium (B) Partial equilibrium (C) Full equilibrium (D) None of the above
Last Answer : (A) Non-equilibrium
Description : Choose the wrong statement (A) Fluids are capable of flowing (B) Fluids conform to the shape of the containing vessels (C) When in equilibrium, fluids cannot sustain tangential forces (D) When in equilibrium, fluids can sustain shear forces
Description : If three non-parallel forces hold a rigid body in equilibrium, they must a.be non-coneurrent b.be colinear c.107 dynes d.be equal in magnitude e.be concurrent
Last Answer : e. be concurrent
Description : For a body to be in equilibrium, which of the following conditions must exist? w) no forces may be acting on the body. x) the body must be accelerating. y) the velocity of the body must be zero. z) the sum of the forces acting on the body must be equal to zero.
Last Answer : ANSWER: Z -- THE SUM OF THE FORCES ACTING ON THE BODY MUST BE EQUAL TO ZERO.
Description : The algebraic sum of moments of the forces forming couple about any point in their plane is (A) Equal to the moment of the couple (B) Constant (C) Both of above are correct (D) Both of above are wrong
Last Answer : (A) Equal to the moment of the couple
Description : The statement ---- if three forces acting at a point are in equilibrium, each force is proportional to the sine of the angle between the other two ---- is known as a.Law of polygon of forces b.D'Alembert's principle c.Newtons law of forces d.Lami's theorem e.Law of triangle of forces
Last Answer : d. Lami's theorem
Description : A number of forces acting at a point will be in equilibrium if?
Last Answer : The sum of the resolved parts in any two perpendicular directions are both zero
Description : When all the forces acting on a body lie in one plane and their lines of action meet at one point, the forces a.constitute a moment b.constitute a couple c.are known as coplaner-concurrent forces. d.are known as non-coplaner forces e.107 dynes
Last Answer : c. are known as coplaner-concurrent forces.
Description : The forces, which meet at one point, but their lines of action do not lie in a plane, are called?
Last Answer : The forces, which meet at one point, but their lines of action do not lie in a plane, are called non-coplanar concurrent forces.
Description : Consider the following statements regarding Coulomb's theory of earth pressure: 1. It is based on wedge theory of earth pressure. 2. It assumes the wall surface to be rough. 3. It may or may not satisfy the static equilibrium condition ... 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only
Last Answer : (b) 1 & 2 only
Description : At equilibrium condition, the chemical potential of a material in different phases in contact with each other is equal. The chemical potential for a real gas (μ) is given by (where, μ = standard chemical potential at unit fugacity (f° = 1 atm. ... (B) μ°+ R ln f (C) μ° + T ln f (D) μ° + R/T ln f
Last Answer : (A) μ° + RT ln f
Description : when the biconditional statement is separated into a conditional and its converse which of these cannot be the converse Biconditional: Lines r coplanar if and only if they lie in the same plane.?
Last Answer : Biconditional: Lines r coplanar if and only if they lie in the same plane. Conditional: If lines are coplanar then they lie in the same plane.
Description : The molecule in which all atoms are not coplanar is
Last Answer : The molecule in which all atoms are not coplanar is A. B. C. D.
Description : A sqaure loop `ABCD`, carrying a current `I_(2)` is placed near and coplanar with a long straight conductor `XY`, carrying a current `I_(1)` as shwon
Last Answer : A sqaure loop `ABCD`, carrying a current `I_(2)` is placed near and coplanar with a long straight conductor `XY` ... )/(2pi)` D. `(2mu_(0)Ii)/(3pi)`
Description : According to force-field theory, every behaviour is the result of equilibrium between which of the following ? (A) Push and pull effect (B) Strong and weak forces (C) Positive and negative forces (D) Driving and restraining forces
Last Answer : Answer: Driving and restraining forces
Description : The market equilibrium for a commodity is determined by : (1) The market supply of the commodity. (2) The balancing of the forces of demand and supply for the commodity (3) (3) The intervention of the Government. (4) (4) The market demand of the commodity.
Last Answer : (2) The balancing of the forces of demand and supply for the commodity Explanation: Market Equilibrium is determined when the quantity demanded of a commodity becomes equal to the quantity ... equilibrium is known as equilibrium price and the corresponding quantity is known as equilibrium quantity.
Description : The minimum number of forces to keep a particle in equilibrium is – (1) 1 (2) 2 (3) 3 (4) 4
Last Answer : (2) 2
Description : If an object is in a state of equilibrium, what can be said about all of the forces acting on the object?
Last Answer : ANSWER: THE SUM OF ALL FORCES ACTING ON THE OBJECT IS ZERO
Description : The minimum number of forces to keep a particle in equilibrium is (1) 1 (2) 2 (3) 3 (4) 4
Last Answer : 2