The velocity corresponding to Reynold number of 2000 is called (A) Sub-sonic velocity (B) Super-sonic velocity (C) Lower critical velocity (D) Higher critical velocity

The velocity corresponding to Reynold number of 2000 is called
(A) Sub-sonic velocity
(B) Super-sonic velocity
(C) Lower critical velocity
(D) Higher critical velocity
by

1 Answer

Answer :

Answer: Option C
by

Related questions

The velocity corresponding to Reynold number of 2800, is called (A) Sub-sonic velocity (B) Super-sonic velocity (C) Lower critical velocity (D) Higher critical velocity

Description : The velocity corresponding to Reynold number of 2800, is called (A) Sub-sonic velocity (B) Super-sonic velocity (C) Lower critical velocity (D) Higher critical velocity

Last Answer : Answer: Option D

The velocity at which the flow changes from laminar flow to turbulent flow is called (A) Critical velocity (B) Velocity of approach (C) Sub-sonic velocity (D) Super-sonic velocity

Description : The velocity at which the flow changes from laminar flow to turbulent flow is called (A) Critical velocity (B) Velocity of approach (C) Sub-sonic velocity (D) Super-sonic velocity

Last Answer : Answer: Option A

When the Mach number is less than unity, the flow is called (A) Sub-sonic flow (B) Sonic flow (C) Super-sonic flow (D) Hyper-sonic flow

Description : When the Mach number is less than unity, the flow is called (A) Sub-sonic flow (B) Sonic flow (C) Super-sonic flow (D) Hyper-sonic flow

Last Answer : Answer: Option A

When the Mach number is more than 6, the flow is called (A) Sub-sonic flow (B) Sonic flow (C) Super-sonic flow (D) Hyper-sonic flow

Description : When the Mach number is more than 6, the flow is called (A) Sub-sonic flow (B) Sonic flow (C) Super-sonic flow (D) Hyper-sonic flow

Last Answer : Answer: Option D

A flow is called super-sonic if the (A) Velocity of flow is very high (B) Discharge is difficult to measure (C) Mach number is between 1 and 6 (D) None of these

Description : A flow is called super-sonic if the (A) Velocity of flow is very high (B) Discharge is difficult to measure (C) Mach number is between 1 and 6 (D) None of these

Last Answer : Answer: Option C

05. The flow in a pipe is laminar, when Reynold number is less than 2000. A) True B) False

Description : 05. The flow in a pipe is laminar, when Reynold number is less than 2000. A) True B) False

Last Answer : A

The flow in a pipe is turbulent when Reynold number is (A) Less than 2000 (B) Between 2000 and 2800 (C) More than 2800 (D) None of these

Description : The flow in a pipe is turbulent when Reynold number is (A) Less than 2000 (B) Between 2000 and 2800 (C) More than 2800 (D) None of these

Last Answer : Answer: Option C

The flow in a pipe is neither laminar nor turbulent when Reynold number is (A) Less than 2000 (B) Between 2000 and 2800 (C) More than 2800 (D) None of these

Description : The flow in a pipe is neither laminar nor turbulent when Reynold number is (A) Less than 2000 (B) Between 2000 and 2800 (C) More than 2800 (D) None of these

Last Answer : Answer: Option B

The velocity at which the laminar flow stops, is known as (A) Velocity of approach (B) Lower critical velocity (C) Higher critical velocity (D) None of these

Description : The velocity at which the laminar flow stops, is known as (A) Velocity of approach (B) Lower critical velocity (C) Higher critical velocity (D) None of these

Last Answer : Answer: Option B

A flow is called sub-sonic, if the Mach number is (A) Less than unity (B) Unity (C) Between 1 and 6 (D) More than 6

Description : A flow is called sub-sonic, if the Mach number is (A) Less than unity (B) Unity (C) Between 1 and 6 (D) More than 6

Last Answer : Answer: Option A

When the Mach number is between __________ the flow is called super-sonic flow. (A) 1 and 2.5 (B) 2.5 and 4 (C) 4 and 6 (D) 1 and 6

Description : When the Mach number is between __________ the flow is called super-sonic flow. (A) 1 and 2.5 (B) 2.5 and 4 (C) 4 and 6 (D) 1 and 6

Last Answer : Answer: Option D

Which of the following quantities are computed by using the hydraulic radius for non-circular ducts? (A) Velocity and relative roughness (B) Head loss and velocity (C) Reynold number, relative roughness and head loss (D) Reynolds number and friction factor

Description : Which of the following quantities are computed by using the hydraulic radius for non-circular ducts? (A) Velocity and relative roughness (B) Head loss and velocity (C) Reynold number, relative roughness and head loss (D) Reynolds number and friction factor

Last Answer : (C) Reynold number, relative roughness and head loss

_________________ is one which has a pressure higher than the saturation pressure corresponding to the existing temperature.  a. Saturation Temperature  b. Sub cooled Liquid  c. Compressed Liquid  d. Saturated Liquid

Description : _________________ is one which has a pressure higher than the saturation pressure corresponding to the existing temperature.  a. Saturation Temperature  b. Sub cooled Liquid  c. Compressed Liquid  d. Saturated Liquid

Last Answer : Compressed Liquid

________________ is one which has a temperature lower than the saturation temperature corresponding to the existing pressure.  a. Saturation Temperature  b. Sub cooled Liquid  c. Compressed Liquid  d. Saturated Liquid

Description : ________________ is one which has a temperature lower than the saturation temperature corresponding to the existing pressure.  a. Saturation Temperature  b. Sub cooled Liquid  c. Compressed Liquid  d. Saturated Liquid

Last Answer : Sub cooled Liquid

11. The velocity at which the turbulent flow starts is known as higher critical velocity. A) Yes B) No

Description : 11. The velocity at which the turbulent flow starts is known as higher critical velocity. A) Yes B) No

Last Answer : A

Pick out the correct statement. (A) Paraffins have higher octane number than corresponding iso-paraffin (B) Paraffins have lower smoke point than aromatics

Description : Pick out the correct statement. (A) Paraffins have higher octane number than corresponding iso-paraffin (B) Paraffins have lower smoke point than aromatics

Last Answer : (B) Paraffins have lower smoke point than aromatics

A large Reynold number is indication of (A) Smooth and streamline flow (B) Laminar flow (C) Steady flow (D) Highly turbulent flow

Description : A large Reynold number is indication of (A) Smooth and streamline flow (B) Laminar flow (C) Steady flow (D) Highly turbulent flow

Last Answer : Answer: Option D

The loss of head due to friction in a pipe of uniform diameter in which a viscous flow is taking place, is (where RN = Reynold number) (A) 1/RN (B) 4/RN (C) 16/RN (D) 64/RN

Description : The loss of head due to friction in a pipe of uniform diameter in which a viscous flow is taking place, is (where RN = Reynold number) (A) 1/RN (B) 4/RN (C) 16/RN (D) 64/RN

Last Answer : Answer: Option C

15. The depth of water in a channel corresponding to the minimum specific energy is known as critical depth. A) Agree B) Disagree

Description : 15. The depth of water in a channel corresponding to the minimum specific energy is known as critical depth. A) Agree B) Disagree

Last Answer : A

The discharge in an open channel corresponding to critical depth is (A) Zero (B) Minimum (C) Maximum (D) None of these

Description : The discharge in an open channel corresponding to critical depth is (A) Zero (B) Minimum (C) Maximum (D) None of these

Last Answer : Answer: Option C

The neutral axis corresponding to balanced section condition is termed as [ A ] Critical neutral axis [ B ] Centroidal neutral axis [ C ] Balanced neutral axis [ D ] All the above

Description : The neutral axis corresponding to balanced section condition is termed as [ A ] Critical neutral axis [ B ] Centroidal neutral axis [ C ] Balanced neutral axis [ D ] All the above

Last Answer : [ A ] Critical neutral axis

In Sonic X, is Super Sonic unbeatable?

Description : In Sonic X, is Super Sonic unbeatable?

Last Answer : In the Sonic X series you see that the Super form of Shadow and Sonic haven’t been beaten by anyone. But, this does not mean that they are invincible! They have their weaknesses.

The principle used in radar is the same as that of Sonar. In radar we use radio waves ; whereas in sonar we use ? A. red waves B. Infrared waves C. Ultrasonic (Answer) D. super sonic E. None of these

Description : The principle used in radar is the same as that of Sonar. In radar we use radio waves ; whereas in sonar we use ? A. red waves B. Infrared waves C. Ultrasonic (Answer) D. super sonic E. None of these

Last Answer : C. Ultrasonic (Answer)

Mach number is defined as the ratio of the local flow velocity to the sonic velocity in the fluid. For what value of Mach number, the gases are considered incompressible? (A) < 0.3 (B) > 3 (C) 50 (D) 1

Description : Mach number is defined as the ratio of the local flow velocity to the sonic velocity in the fluid. For what value of Mach number, the gases are considered incompressible? (A) < 0.3 (B) > 3 (C) 50 (D) 1

Last Answer : (A) < 0.3

Pick out the wrong statement. (A) Higher specific gravity of petroleum products means higher C/H ratio (B) Aromatics have lower specific gravity than corresponding paraffins (C) Hydrocarbons of low specific gravity (e.g., paraffins) possess the maximum thermal energy per unit volume (D) Hydrocarbons of high specific gravity (e.g., aromatics) possess the maximum thermal energy per unit weight

Description : Pick out the wrong statement. (A) Higher specific gravity of petroleum products means higher C/H ratio (B) Aromatics have lower specific gravity than corresponding paraffins (C) Hydrocarbons of low ... of high specific gravity (e.g., aromatics) possess the maximum thermal energy per unit weight

Last Answer : (B) Aromatics have lower specific gravity than corresponding paraffins

Primary alcohols have boiling points that are _____________ the corresponding aldehydes. (a) Lower than (b) Higher than (c) About the same

Description : Primary alcohols have boiling points that are _____________ the corresponding aldehydes. (a) Lower than (b) Higher than (c) About the same

Last Answer : Higher than

Which statements about alkenes and alkanes of corresponding chain lengths is true? (I) Alkenes have slightly lower melting points than alkanes (II) Alkenes have slightly higher melting points than alkanes (III) Alkenes have higher boiling points than alkanes (IV) Alkenes have lower boiling points than alkanes (a) I and III (b) II and IV (c) I and IV (d) II and III

Description : Which statements about alkenes and alkanes of corresponding chain lengths is true? (I) Alkenes have slightly lower melting points than alkanes (II) Alkenes have slightly higher melting points than alkanes (III) Alkenes have higher boiling ... (a) I and III (b) II and IV (c) I and IV (d) II and III

Last Answer : I and III

Surging basically implies A. Unsteady, periodic and reversed flow B. Forward motion of air at a speed above sonic velocity C. The surging action due to the blast of air produced in a compressor D. Forward movement of aircraft

Description : Surging basically implies A. Unsteady, periodic and reversed flow B. Forward motion of air at a speed above sonic velocity C. The surging action due to the blast of air produced in a compressor D. Forward movement of aircraft

Last Answer : ANSWER : A

A flow is called hyper-sonic, if the Mach number is (A) Less than unity (B) Unity (C) Between 1 and 6 (D) None of these

Description : A flow is called hyper-sonic, if the Mach number is (A) Less than unity (B) Unity (C) Between 1 and 6 (D) None of these

Last Answer : Answer: Option D

The ratio of inertial forces to viscous forces is called the __________ number. (A) Weber (B) Mach (C) Froude (D) Reynold

Description : The ratio of inertial forces to viscous forces is called the __________ number. (A) Weber (B) Mach (C) Froude (D) Reynold

Last Answer : (D) Reynold

The ratio of pressure forces to inertial forces is called the __________ number. (A) Froude (B) Euler (C) Reynold (D) Mach

Description : The ratio of pressure forces to inertial forces is called the __________ number. (A) Froude (B) Euler (C) Reynold (D) Mach

Last Answer : (B) Euler

The equation relating friction factor to Reynold number, f -0.5 = 4 loge (NRe /√f) -0.4 , is called the __________ equation. (A) Nikuradse (B) Von-Karman

Description : The equation relating friction factor to Reynold number, f -0.5 = 4 loge (NRe /√f) -0.4 , is called the __________ equation. (A) Nikuradse (B) Von-Karman

Last Answer : (B) Ergun's

Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation (B) Film co-efficient for vaporisation decreases as a result of vapor binding (C) In industrial practice, sub-cooling of condensate is required, when thecondensate is a volatile liquid and is to be transferred for storage(D) Overall heat transfer co-efficient in a heat exchanger is controlled by thevalue of the film co-efficient, which is higher

Description : Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation ( ... in a heat exchanger is controlled by the value of the film co-efficient, which is higher

Last Answer : (D) Overall heat transfer co-efficient in a heat exchanger is controlled by the value of the film co-efficient, which is higher

A 4S diesel engine, when running at 2000 rpm has an injection duration of 1.5 ms.What is the corresponding of the crank angle in degrees? (a) 18° (b) 9° (c)36° (d) 15°

Description : A 4S diesel engine, when running at 2000 rpm has an injection duration of 1.5 ms.What is the corresponding of the crank angle in degrees? (a) 18° (b) 9° (c)36° (d) 15°

Last Answer : Ans :a

Find the conduction current density when conductivity of a material is 500 units and corresponding electric field is 2 units. a) 500 b) 250 c) 1000 d) 2000

Description : Find the conduction current density when conductivity of a material is 500 units and corresponding electric field is 2 units. a) 500 b) 250 c) 1000 d) 2000

Last Answer : c) 1000

For a given Reynold number as d/D for an orifice increases, Cd will (where, d & D are orifice & pipe diameters respectively). (A) Increase (B) Decrease (C) Remain constant (D) Either (A) or (B); depends on other factors

Description : For a given Reynold number as d/D for an orifice increases, Cd will (where, d & D are orifice & pipe diameters respectively). (A) Increase (B) Decrease (C) Remain constant (D) Either (A) or (B); depends on other factors

Last Answer : (A) Increase

In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said to have the same hydraulic roughness, when they have equal values of (A) Relative roughness (B) Absolute roughness (C) Friction co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Description : In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said ... co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Last Answer : (C) Friction co-efficient for flows at equal Reynold number

The molecular number density of an ideal gas at standard temperature and pressure in cm3  a. Froude number  b. Loschmidt number  c. Mach number  d. Reynold number

Description : The molecular number density of an ideal gas at standard temperature and pressure in cm3  a. Froude number  b. Loschmidt number  c. Mach number  d. Reynold number

Last Answer : Loschmidt number

__________________ is a liquid at the saturations which has temperature equal to the boiling point corresponding to the existing pressure.  a. Saturation Temperature  b. Sub cooled Liquid  c. Compressed Liquid  d. Saturated Liquid

Description : __________________ is a liquid at the saturations which has temperature equal to the boiling point corresponding to the existing pressure.  a. Saturation Temperature  b. Sub cooled Liquid  c. Compressed Liquid  d. Saturated Liquid

Last Answer : Saturated Liquid

As shown in Fig. `PQ` is a ray incident on prism `ABC`. Show the corresponding refracted and emergent rays. The critical angle for the material of the

Description : As shown in Fig. `PQ` is a ray incident on prism `ABC`. Show the corresponding refracted and emergent rays. The critical angle for the material of the

Last Answer : As shown in Fig. `PQ` is a ray incident on prism `ABC`. Show the corresponding refracted and ... is refractive index of the material of prism ? .

Solids which conduct electricity at higher temperature but not at lower temperature are called (1) super-conductor (2) metallic-conductor (3) semi-conductor (4) insulator

Description : Solids which conduct electricity at higher temperature but not at lower temperature are called (1) super-conductor (2) metallic-conductor (3) semi-conductor (4) insulator

Last Answer : (3) semi-conductor Explanation: Semiconductors are insulators at low temperatures and reasonably good conductors at higher temperatures. As temperature increases, the semiconductor material becomes a better and better conductor.

Solids which conduct electricity at higher temperature but not at lower temperature are called (1) super-conductor (2) metallic-conductor (3) semi-conductor (4) insulator

Description : Solids which conduct electricity at higher temperature but not at lower temperature are called (1) super-conductor (2) metallic-conductor (3) semi-conductor (4) insulator

Last Answer : semi-conductor

In a chute spillway, the flow is usually (A) Uniform (B) Subcritical (C) Critical (D) Super critical

Description : In a chute spillway, the flow is usually (A) Uniform (B) Subcritical (C) Critical (D) Super critical

Last Answer : Answer: Option D

Aerodynamic noise resulting from turbulent gas flow is the most prevalent source of valve noise in fluid flow control. It is caused due to (A) Reynold stresses (B) Shear forces (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Aerodynamic noise resulting from turbulent gas flow is the most prevalent source of valve noise in fluid flow control. It is caused due to (A) Reynold stresses (B) Shear forces (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Is the surface temperature of white dwarf Stars higher or lower than red super giant?

Description : Is the surface temperature of white dwarf Stars higher or lower than red super giant?

Last Answer : Yes dwarf has higher temperature

While determining the yield of open wells by the pumping test (A) Velocity of recharging water, increases with depression head (B) Depression head resulting at critical velocity, is called critical depression head (C) Working head is generally limited to (D) Maximum safe yield of an open well, is expected at critical depression head

Description : While determining the yield of open wells by the pumping test  (A) Velocity of recharging water, increases with depression head  (B) Depression head resulting at critical velocity, is called critical ... (D) Maximum safe yield of an open well, is expected at critical depression head 

Last Answer : (D) Maximum safe yield of an open well, is expected at critical depression head 

A point, in a compressible flow where the velocity of fluid is zero, is called (A) Critical point (B) Vena contractaC) Stagnation point (D) None of these

Description : A point, in a compressible flow where the velocity of fluid is zero, is called (A) Critical point (B) Vena contracta C) Stagnation point (D) None of these

Last Answer : Answer: Option C

The best instrument for measuring the velocity of a stream flow is (A) Pitot tube (B) Price's current meter (C) Surface float (D) Sub-surface float

Description : The best instrument for measuring the velocity of a stream flow is (A) Pitot tube (B) Price's current meter (C) Surface float (D) Sub-surface float

Last Answer : Answer: Option B

To prevent movement of moisture from sub-grade to road pavement on embankments about 0.6 m to 1 m higher than water table, the thickness of cut off layer of coarse sand used, is (A) 15 cm (B) 20 cm (C) 30 cm (D) None of these

Description : To prevent movement of moisture from sub-grade to road pavement on embankments about 0.6 m to 1 m higher than water table, the thickness of cut off layer of coarse sand used, is (A) 15 cm (B) 20 cm (C) 30 cm (D) None of these

Last Answer : Answer: Option D

Bulk modulus of a fluid is the ratio of (A) Shear stress to shear strain (B) Increase in volume to the viscosity of fluid (C) Increase in pressure to the volumetric strain (D) Critical velocity to the viscosity of fluid

Description : Bulk modulus of a fluid is the ratio of (A) Shear stress to shear strain (B) Increase in volume to the viscosity of fluid (C) Increase in pressure to the volumetric strain (D) Critical velocity to the viscosity of fluid

Last Answer : Answer: Option C