Pick out the correct statement. (A) Paraffins have higher octane number than corresponding iso-paraffin (B) Paraffins have lower smoke point than aromatics

Pick out the correct statement.
(A) Paraffins have higher octane number than corresponding iso-paraffin
(B) Paraffins have lower smoke point than aromatics
by

1 Answer

Answer :

(B) Paraffins have lower smoke point than aromatics
by

Related questions

Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming process (C) The most ideal feedstock for thermal reforming is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene

Pick out the wrong statement. (A) Higher specific gravity of petroleum products means higher C/H ratio (B) Aromatics have lower specific gravity than corresponding paraffins (C) Hydrocarbons of low specific gravity (e.g., paraffins) possess the maximum thermal energy per unit volume (D) Hydrocarbons of high specific gravity (e.g., aromatics) possess the maximum thermal energy per unit weight

Description : Pick out the wrong statement. (A) Higher specific gravity of petroleum products means higher C/H ratio (B) Aromatics have lower specific gravity than corresponding paraffins (C) Hydrocarbons of low ... of high specific gravity (e.g., aromatics) possess the maximum thermal energy per unit weight

Last Answer : (B) Aromatics have lower specific gravity than corresponding paraffins

Choose the correct statement. (A) Octane number of i-octane is zero (B) Octane number of paraffins increases with increasing number of carbon atoms (C) Branched chain paraffins have higher octane number than straight chain paraffins with same number of carbon atoms (D) The aromatics have lower octane number than naphthenes with same number of carbon atoms

Description : Choose the correct statement. (A) Octane number of i-octane is zero (B) Octane number of paraffins increases with increasing number of carbon atoms (C) Branched chain paraffins have higher octane ... atoms (D) The aromatics have lower octane number than naphthenes with same number of carbon atoms

Last Answer : (A) Octane number of i-octane is zero

Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF, AlCl3 & H2SO4 as Catalysts (C) All the alkylation processes use very high temperature (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Description : Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF ... (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Last Answer : (C) All the alkylation processes use very high temperature (> 1000°C)

Calorific value of (A) Light paraffinic fuel oils is equal to that of equivalent olefins (B) n-paraffin is lower than that of iso-paraffins of the same compounds (C) Light paraffinic fuel oils is higher than that of equivalent olefins (D) Light paraffinic fuel oils is lower than that of equivalent olefins

Description : Calorific value of (A) Light paraffinic fuel oils is equal to that of equivalent olefins (B) n-paraffin is lower than that of iso-paraffins of the same compounds (C) Light paraffinic fuel ... than that of equivalent olefins (D) Light paraffinic fuel oils is lower than that of equivalent olefins

Last Answer : (C) Light paraffinic fuel oils is higher than that of equivalent olefins

Pick out the wrong statement. (A) Aromatics have higher specific gravity than paraffins (B) Gross calorific value (GCV) of petrofuels is equal to (12400 - 2100 ρ 2 ) where, ρ is the specific gravity of the fuel at 15.5°C (C) Heavier petrofuels have higher GCV on weight basis (i.e., Kcal/kg) but lower GCV on volume basis (i.e., Kcal/litre) (D) Higher specific gravity of petrofuels means higher C/H ratio

Description : Pick out the wrong statement. (A) Aromatics have higher specific gravity than paraffins (B) Gross calorific value (GCV) of petrofuels is equal to (12400 - 2100 ρ 2 ) where, ρ is the specific gravity ... volume basis (i.e., Kcal/litre) (D) Higher specific gravity of petrofuels means higher C/H ratio

Last Answer : (C) Heavier petrofuels have higher GCV on weight basis (i.e., Kcal/kg) but lower GCV on volume basis (i.e., Kcal/litre)

Reforming converts (A) Olefins into paraffins (B) Naphthenes into aromatics (C) Naphthenes into olefins (D) Naphthenes into paraffin

Description : Reforming converts (A) Olefins into paraffins (B) Naphthenes into aromatics (C) Naphthenes into olefins (D) Naphthenes into paraffin

Last Answer : (B) Naphthenes into aromatics

Which of the following has the highest octane number? (A) Aromatics(B) i-paraffins(C) Naphthenes(D) Olefins

Description : Which of the following has the highest octane number? (A) Aromatics (B) i-paraffins (C) Naphthenes (D) Olefins

Last Answer : (A) Aromatics

Which of the following hydrocarbons of same carbon atoms has minimum smoking tendency? (A) Paraffins (B) Naphthenes (C) Aromatics (D) Iso-paraffins

Description : Which of the following hydrocarbons of same carbon atoms has minimum smoking tendency? (A) Paraffins (B) Naphthenes (C) Aromatics (D) Iso-paraffins

Last Answer : (A) Paraffins

Alkylation (A) Causes olefins to combine with each other(B) Causes olefins to combine with iso-paraffins(C) Converts iso-paraffin into olefin(D) Converts olefin into paraffin

Description : Alkylation (A) Causes olefins to combine with each other (B) Causes olefins to combine with iso-paraffins (C) Converts iso-paraffin into olefin (D) Converts olefin into paraffin

Last Answer : (B) Causes olefins to combine with iso-paraffins

Smoke point of a test sample of kerosene is found to be 15 mm. On removal of __________ from it, the smoke point rises to 25 mm. (A) n-paraffins (B) Olefins (C) Aromatics (D) None of these

Description : Smoke point of a test sample of kerosene is found to be 15 mm. On removal of __________ from it, the smoke point rises to 25 mm. (A) n-paraffins (B) Olefins (C) Aromatics (D) None of these

Last Answer : (C) Aromatics

Extractor temperature is maintained at -20°C in Edeleanu process to reduce the __________ of kerosene. (A) Smoke point (B) Paraffins (C) Aromatics (D) Naphthenes

Description : Extractor temperature is maintained at -20°C in Edeleanu process to reduce the __________ of kerosene. (A) Smoke point (B) Paraffins (C) Aromatics (D) Naphthenes

Last Answer : (B) Paraffins

Good quality kerosene should have (A) Low smoke point (B) High smoke point (C) High aromatics content (D) Low paraffins content

Description : Good quality kerosene should have (A) Low smoke point (B) High smoke point (C) High aromatics content (D) Low paraffins content

Last Answer : (B) High smoke point

Aromatics have the highest __________ of all the hydrocarbons of same carbon atoms. (A) Smoke point (B) Octane number (C) Cetane number (D) Viscosity

Description : Aromatics have the highest __________ of all the hydrocarbons of same carbon atoms. (A) Smoke point (B) Octane number (C) Cetane number (D) Viscosity

Last Answer : (B) Octane number

Presence of aromatics in (A) Diesel increases its cetane number (B) Kerosene increases its smoke point (C) Petrol increases its octane number (D) All (A), (B) and (C)

Description : Presence of aromatics in (A) Diesel increases its cetane number (B) Kerosene increases its smoke point (C) Petrol increases its octane number (D) All (A), (B) and (C)

Last Answer : (C) Petrol increases its octane number

Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Description : Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Last Answer : (A) Higher yield of straight run gasoline

Pick out the wrong statement about the smoking tendency of various hydrocarbon constituents of kerosene. (A) Smoking tendency of hydrocarbons increases in the order: paraffins → isoparaffins → naphthenes → aromatics (B) Smoking tendency of paraffins increases with decrease in its molecular weight

Description : Pick out the wrong statement about the smoking tendency of various hydrocarbon constituents of kerosene. (A) Smoking tendency of hydrocarbons increases in the order: paraffins → isoparaffins → naphthenes → aromatics (B) Smoking tendency of paraffins increases with decrease in its molecular weight

Last Answer : (B) Smoking tendency of paraffins increases with decrease in its molecular weight

In a SI engine, which one of the following is the correct order of the fuels with increasing detonation tendency? (a) Paraffins, olefins, naphthenes, aromatics (b) Aromatics, naphthenes, paraffins, olefins (c) Naphthenes, olefins, aromatics, paraffins (d) Aromatics, naphthenes, olefins, paraffins

Description : In a SI engine, which one of the following is the correct order of the fuels with increasing detonation tendency? (a) Paraffins, olefins, naphthenes, aromatics (b) Aromatics, naphthenes, paraffins, olefins (c) Naphthenes, olefins, aromatics, paraffins (d) Aromatics, naphthenes, olefins, paraffins

Last Answer : Ans :d

H/C ratio (by weight) for the same number of carbon atoms is the highest in case of (A) Aromatics (B) Paraffins (C) Olefins (D) Naphthenes

Description : H/C ratio (by weight) for the same number of carbon atoms is the highest in case of (A) Aromatics (B) Paraffins (C) Olefins (D) Naphthenes

Last Answer : (D) Naphthenes

Which of the following has the lowest cetane number? (A) Aromatics (B) i-paraffins (C) Naphthene (D) Olefins

Description : Which of the following has the lowest cetane number? (A) Aromatics (B) i-paraffins (C) Naphthene (D) Olefins

Last Answer : (A) Aromatics

Which is the most desirable component of a good quality kerosene? (A) i-paraffins (B) Aromatics (C) n-paraffins (D) Naphthenes

Description : Which is the most desirable component of a good quality kerosene? (A) i-paraffins (B) Aromatics (C) n-paraffins (D) Naphthenes

Last Answer : (C) n-paraffins

Which of the following has the highest gum forming tendency in gosoline? (A) Paraffins (B) Diolefins (C) Aromatics (D) Naphthenes

Description : Which of the following has the highest gum forming tendency in gosoline? (A) Paraffins (B) Diolefins (C) Aromatics (D) Naphthenes

Last Answer : (B) Diolefins

Which is the most undesirable component in kerosene? (A) Aromatics (B) i-paraffins (C) n-paraffins (D) Naphthenes

Description : Which is the most undesirable component in kerosene? (A) Aromatics (B) i-paraffins (C) n-paraffins (D) Naphthenes

Last Answer : (A) Aromatics

Pyrolysis of kerosene or natural gasoline is done to produce mainly the (A) Olefins and aromatics (B) Lighter paraffins (C) Stabilised gasoline (D) Diesel

Description : Pyrolysis of kerosene or natural gasoline is done to produce mainly the (A) Olefins and aromatics (B) Lighter paraffins (C) Stabilised gasoline (D) Diesel

Last Answer : (A) Olefins and aromatic

Which of the following is desirable in diesel and kerosene but is undesirable in gasoline? (A) Aromatics (B) Mercaptans (C) Paraffins (D) Naphthenic acid

Description : Which of the following is desirable in diesel and kerosene but is undesirable in gasoline? (A) Aromatics (B) Mercaptans (C) Paraffins (D) Naphthenic acid

Last Answer : (A) Aromatics

Which of the following is desirable in petrol (gasoline) but undesirable in kerosene? (A) Paraffins (B) Aromatics (C) Mercaptans

Description : Which of the following is desirable in petrol (gasoline) but undesirable in kerosene? (A) Paraffins (B) Aromatics (C) Mercaptans

Last Answer : (C) Mercaptans

Which of the following is the easiest to crack? (A) Paraffins (B) Olefins (C) Naphthenes (D) Aromatics

Description : Which of the following is the easiest to crack? (A) Paraffins (B) Olefins (C) Naphthenes (D) Aromatics

Last Answer : (A) Paraffins

Name the hydrocarbon having the poorest oxidation stability. (A) Naphthene (B) Olefin (C) Paraffin (D) Aromatics

Description : Name the hydrocarbon having the poorest oxidation stability. (A) Naphthene (B) Olefin (C) Paraffin (D) Aromatics

Last Answer : (D) Aromatics

For C.I. engines fuel most preferred are a) aromatics b) paraffins c) olefins d) napthenes

Description : For C.I. engines fuel most preferred are a) aromatics b) paraffins c) olefins d) napthenes

Last Answer : Answer: b Explanation: For C.I. engines fuel most preferred are paraffins and for S.I. engines fuel most preferred are aromatics.

For S.I. engines fuel most preferred are a) aromatics b) paraffins c) olefins d) napthenes

Description : For S.I. engines fuel most preferred are a) aromatics b) paraffins c) olefins d) napthenes

Last Answer : Answer: a Explanation: For S.I. engines fuel most preferred are aromatics while for C.I. engines fuel most preferred are paraffins.

Polymerisation (A) Produces i-octane from cracked gases containing i-butane and butene (B) Causes olefins to combine with each other (C) Causes aromatics to combine with each other (D) Is aimed at producing lubricating oil

Description : Polymerisation (A) Produces i-octane from cracked gases containing i-butane and butene (B) Causes olefins to combine with each other (C) Causes aromatics to combine with each other (D) Is aimed at producing lubricating oil

Last Answer : (B) Causes olefins to combine with each other

Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder (C) The wavelength corresponding to maximum mono-chromatic emissive power increases with rise in temperature (D) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Description : Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate ... ) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Last Answer : (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder

Presence of predominantly large quantity of aromatics (polynuclear) is not desirable in aviation fuel, because it has (A) High pour point and low smoke point (B) Low viscosity index (C) High self-ignition temperature (D) All (A), (B) and (C)

Description : Presence of predominantly large quantity of aromatics (polynuclear) is not desirable in aviation fuel, because it has (A) High pour point and low smoke point (B) Low viscosity index (C) High self-ignition temperature (D) All (A), (B) and (C)

Last Answer : (B) Low viscosity index

Paraffins are desirable in lubricating oil, as it has got high (A) Viscosity (B) Viscosity index (C) Smoke point (D) Pour poin

Description : Paraffins are desirable in lubricating oil, as it has got high (A) Viscosity (B) Viscosity index (C) Smoke point (D) Pour poin

Last Answer : (C) Smoke point

Which of the following reactions is undesirable in the production of catalytically reformed gasoline? (A) Dehydrogenation of Naphthene (B) Dehydrogenation of lower paraffins (C) Dehydrocyclization of higher paraffins (D) Isomerisation of paraffins

Description : Which of the following reactions is undesirable in the production of catalytically reformed gasoline? (A) Dehydrogenation of Naphthene (B) Dehydrogenation of lower paraffins (C) Dehydrocyclization of higher paraffins (D) Isomerisation of paraffins

Last Answer : (B) Dehydrogenation of lower paraffins

Iso-octane is used as a reference substance in the definition of octane number and it is assigned an octane number value of 100. Iso-octane is chemically known as (A) α-methyl naphthalene (B) 2-2-4 tri methyl pentane (C) 1, 3 butadiene (D) Tetra methyl ethylene

Description : Iso-octane is used as a reference substance in the definition of octane number and it is assigned an octane number value of 100. Iso-octane is chemically known as (A) α-methyl naphthalene (B) 2-2-4 tri methyl pentane (C) 1, 3 butadiene (D) Tetra methyl ethylene

Last Answer : (B) 2-2-4 tri methyl pentane

By higher octane number of SI fuel, it is meant that the fuel has (a) Higher heating value (b) Higher flash point (c) Lower volatility (d) Longer ignition delay

Description : By higher octane number of SI fuel, it is meant that the fuel has (a) Higher heating value (b) Higher flash point (c) Lower volatility (d) Longer ignition delay

Last Answer : Ans : d

Choose the correct statement regarding thermal cracking. (A) Moderate changes in operating temperature does not change the depth of cracking (B) Increased residence time results in the decreased severity of cracking (C) At low pressure, the yield of lighter hydrocarbons are more (D) Greater depth of cracking gives lower octane number gasoline

Description : Choose the correct statement regarding thermal cracking. (A) Moderate changes in operating temperature does not change the depth of cracking (B) Increased residence time results in the decreased ... of lighter hydrocarbons are more (D) Greater depth of cracking gives lower octane number gasoline

Last Answer : (D) Greater depth of cracking gives lower octane number gasoline

Octane number of gasoline is a measure of its (A) Resistance to knock (B) Ignition delay (C) Ignition temperature (D) Smoke point

Description : Octane number of gasoline is a measure of its (A) Resistance to knock (B) Ignition delay (C) Ignition temperature (D) Smoke point

Last Answer : (A) Resistance to knock

Straight run petrol as compared to methyl/ethyl alcohol has (A) Lower calorific value (B) Lower octane number (C) Higher specific gravity (D) Higher ignition temperature

Description : Straight run petrol as compared to methyl/ethyl alcohol has (A) Lower calorific value (B) Lower octane number (C) Higher specific gravity (D) Higher ignition temperature

Last Answer : (B) Lower octane number

Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Description : Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Last Answer : (A) Gives higher yield of petrol

Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given conversion (C) Percentage conversion increases with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Description : Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given ... with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Octane number of gasoline is obtained by comparing the performance of the engine when running on a mixture of the following hydrocarbons A. ethane and methane B. normal heptane and iso-octane C. iso-heptane and octane D. iso-octane and TEL

Description : Octane number of gasoline is obtained by comparing the performance of the engine when running on a mixture of the following hydrocarbons A. ethane and methane B. normal heptane and iso-octane C. iso-heptane and octane D. iso-octane and TEL

Last Answer : ANSWER : B

A mixture containing 65% of iso-octane and 35% of normal heptane will have a) cetane number 65 b) octane number 65 c) cetane number 35 d) octane number 35

Description : A mixture containing 65% of iso-octane and 35% of normal heptane will have a) cetane number 65 b) octane number 65 c) cetane number 35 d) octane number 35

Last Answer : Answer: b Explanation: A mixture containing 65% of iso-octane and 35% of normal heptane will have octane number 65 as octane number is the number percentage containing iso-octane.

A fuel of an octane number rating of 75 matches in knocking intensity as a mixture of a) 75% iso-octane and 25% normal heptane b) 75% normal heptane and 25% iso-octane c) 75% petrol and 25% diesel d) 75% diesel and 25% petrol

Description : A fuel of an octane number rating of 75 matches in knocking intensity as a mixture of a) 75% iso-octane and 25% normal heptane b) 75% normal heptane and 25% iso-octane c) 75% petrol and 25% diesel d) 75% diesel and 25% petrol

Last Answer : Answer: a Explanation: None.

The compound that has the least value for octane number is – (1) 2-methyl heptane (2) Iso-octane (3) 2,2-dimethyl hexane (4) n-heptane

Description : The compound that has the least value for octane number is – (1) 2-methyl heptane (2) Iso-octane (3) 2,2-dimethyl hexane (4) n-heptane

Last Answer : (4) n-heptane Explanation: Octane rating or octane number is a standard measure of the performance of a motor or aviation fuel. The higher the octane number, the more compression the fuel can withstand. Isooctane (upper) has an octane rating of 100 whereas n-heptane has an octane rating of O.

Why iso-octane is chosen as reference fuel for S.I. engines and allotted 100 value for its octane number ?

Description : Why iso-octane is chosen as reference fuel for S.I. engines and allotted 100 value for its octane number ?

Last Answer : Iso-octane permits highest compression without causing knocking.

Why iso-octane is chosen as reference fuel for S.I. engines and allotted 100 value for its octane number ?

Description : Why iso-octane is chosen as reference fuel for S.I. engines and allotted 100 value for its octane number ?

Last Answer : Iso-octane permits highest compression without causing knocking

The compound that has the least value for octane number is : (1) 2-methyl heptane (2) Iso-octane (3) 2,2-dimethyl hexane (4) n-heptane

Description : The compound that has the least value for octane number is : (1) 2-methyl heptane (2) Iso-octane (3) 2,2-dimethyl hexane (4) n-heptane

Last Answer : n-heptane

Tetra-ethyl lead is added in gasoline to (A) Increase its smoke point (B) Reduce gum formation(C) Reduce the pour point(D) Increase its octane numbe

Description : Tetra-ethyl lead is added in gasoline to (A) Increase its smoke point (B) Reduce gum formation (C) Reduce the pour point (D) Increase its octane numbe

Last Answer : (D) Increase its octane numbe