The ratio of the average load to the installed capacity of the plant whose reserve capacity is zero will be equal to (A) Load factor (B) Plant factor (C) Utilisation factor (D) Both (A) and (B)

The ratio of the average load to the installed capacity of the plant whose reserve capacity is zero
will be equal to
(A) Load factor
(B) Plant factor
(C) Utilisation factor
(D) Both (A) and (B)
by

1 Answer

Answer :

Answer: Option D
by

Related questions

30. The ratio of current year‘s production to the reference year‘s production is called as a) Demand factor b) Production factor c) Utilisation factor d) Load factor

Description : The ratio of current year‘s production to the reference year‘s production is called as a) Demand factor b) Production factor c) Utilisation factor d) Load factor

Last Answer : Production factor 

The following graph represents the installed capacity for cement production (in tonnes) and the actual production (in tonnes) of nine cement plants of a cement company. Capacity utilization of a plant is defined as ratio of actual production of cement to installed capacity. A plant with installed capacity of at least 200 tonnes is called a large plant and a plant with lesser capacity is called a small plant. The difference between total production of large plants and small plants, in tonnes is _____

Description : The following graph represents the installed capacity for cement production (in tonnes) and the actual production (in tonnes) of nine cement plants of a cement company. Capacity utilization of a plant ... difference between total production of large plants and small plants, in tonnes is _____

Last Answer : Correct answer is 120.

Two AC generators of the same capacity are operating in parallel. One with a zero speed droop setting and the other with a 5% speed droop. If its capacity is not exceeded, the unit whose governor has the zero speed droop setting will _____________. A. assume the smaller share of the load B. maintain the frequency of the system C. have poor sensitivity characteristics D. have poor power response

Description : Two AC generators of the same capacity are operating in parallel. One with a zero speed droop setting and the other with a 5% speed droop. If its capacity is not exceeded, the unit whose ... B. maintain the frequency of the system C. have poor sensitivity characteristics D. have poor power response

Last Answer : Answer: B

Consider the following problems being faced by the Indian Coal Industry : 1. Poor quality of coal and bottlenecks in the coal movement 2. Low utilisation capacity of washeries 3. Growing dependence on the import of coking coal 4. Administered prices Which of the above are correct? [BPSC 2011] (a) II, III and IV (b) I, II, III and IV (c) I, III and IV (d) I, II and III

Description : Consider the following problems being faced by the Indian Coal Industry : 1. Poor quality of coal and bottlenecks in the coal movement 2. Low utilisation capacity of washeries 3. Growing dependence on the import of coking coal 4. ... (b) I, II, III and IV (c) I, III and IV (d) I, II and III

Last Answer : Ans: (b)

Capacity utilisation (1) is usually near 100 percent. (2) represents the percent of the labour force that is employed. (3) is a measure of the proportional of the existing capital stock used for current production. (4) rises as the economy moves into a recession, since firms must replace unemployed workers with some other resources to maintain production.

Description : Capacity utilisation (1) is usually near 100 percent. (2) represents the percent of the labour force that is employed. (3) is a measure of the proportional of the existing capital ... into a recession, since firms must replace unemployed workers with some other resources to maintain production.

Last Answer : is a measure of the proportional of the existing capital stock used for current production.

For high value of diversity factor, a power station of given installed capacity will be in a position to supply?

Last Answer : For high value of diversity factor, a power station of given installed capacity will be in a position to supply more number of consumers.

The ratio of average values of shear stresses produced on the bed and the banks of a channel due to flowing water is (A) Less than 1 (B) Equal to 1 (C) Greater than 1 (D) Equal to zero

Description : The ratio of average values of shear stresses produced on the bed and the banks of a channel due to flowing water is (A) Less than 1 (B) Equal to 1 (C) Greater than 1 (D) Equal to zero

Last Answer : Answer: Option C

Traffic intensity in Queuing Theory is also called........................... a. Service factor b. Arrival factor c. Utilisation factor d. None of these

Description : Traffic intensity in Queuing Theory is also called........................... a. Service factor b. Arrival factor c. Utilisation factor d. None of these

Last Answer : c. Utilisation factor

Following the six-tenth factor rule, if a log-log plot of capacity of the equipment vs. cost of the equipment is made, then a straight line is obtained, whose slope is equal to (A) 0.1 (B) 0.6 (C) 0.2 (D) 0.8

Description : Following the six-tenth factor rule, if a log-log plot of capacity of the equipment vs. cost of the equipment is made, then a straight line is obtained, whose slope is equal to (A) 0.1 (B) 0.6 (C) 0.2 (D) 0.8

Last Answer : (B) 0.6

An intense rain is falling at a uniform rate of 7.5 cm/hour for a period of 60 minutes on a basin whose area is 500 hectares. If the average infiltration capacity during the entire rain period is assumed to be 1.5 cm/hr, the maximum run-off rate based on 10 minute peak percentage of 16% from distributing graph of the basin, is (A) 40 cumecs (B) 60 cumecs (C) 80 cumecs (D) 100 cumecs

Description : An intense rain is falling at a uniform rate of 7.5 cm/hour for a period of 60 minutes on a basin whose area is 500 hectares. If the average infiltration capacity during the entire rain period is assumed to be 1.5 ... of the basin, is (A) 40 cumecs (B) 60 cumecs (C) 80 cumecs (D) 100 cumecs

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) The bearing capacity of a pile is defined as the load which can be sustained by the pile without producing excessive settlement (B) The safe bearing capacity of a pile is obtained by dividing the ultimate bearing capacity with a suitable factor of safety (C) The factor of safety for piles is taken as 6 (D) All the above

Description : Pick up the correct statement from the following: (A) The bearing capacity of a pile is defined as the load which can be sustained by the pile without producing excessive settlement (B) The safe bearing capacity ... of safety (C) The factor of safety for piles is taken as 6 (D) All the above

Last Answer : Answer: Option D

The percentage of food nitrogen that is retained in the body represents (A) Digestibility coefficient (B) Biological value of proteins (C) Protein efficiency ratio (D) Net protein utilisation

Description : The percentage of food nitrogen that is retained in the body represents (A) Digestibility coefficient (B) Biological value of proteins (C) Protein efficiency ratio (D) Net protein utilisation

Last Answer : Answer : D

In a person increase in weight in gms per gm of protein consumption represents (A) Protein efficiency ratio (B) Digestibility value of proteins (C) Biological value of proteins (D) Net protein utilisation

Description : In a person increase in weight in gms per gm of protein consumption represents (A) Protein efficiency ratio (B) Digestibility value of proteins (C) Biological value of proteins (D) Net protein utilisation

Last Answer : Answer : A

The percentage of nitrogen retained in the body after absorption of diet represents (A) Digestibility coefficient of proteins (B) Biological value of proteins (C) Protein efficiency ratio (D) Net protein utilisation

Description : The percentage of nitrogen retained in the body after absorption of diet represents (A) Digestibility coefficient of proteins (B) Biological value of proteins (C) Protein efficiency ratio (D) Net protein utilisation

Last Answer : Answer : B

The gain in body weight (gm) per gm of protein ingested is known as (A) Net protein utilisation (B) Protein efficiency ratio (C) Digestibility coefficient (D) Biological value of protein

Description : The gain in body weight (gm) per gm of protein ingested is known as (A) Net protein utilisation (B) Protein efficiency ratio (C) Digestibility coefficient (D) Biological value of protein

Last Answer : Answer : B

Net protein utilisation depends upon (A) Protein efficiency ratio (B) Digestibility coefficient (C) Digestibility coefficient and protein efficiency ratio (D) Digestibility coefficient and biological value

Description : Net protein utilisation depends upon (A) Protein efficiency ratio (B) Digestibility coefficient (C) Digestibility coefficient and protein efficiency ratio (D) Digestibility coefficient and biological value

Last Answer : Answer : D

The percentage of ingested protein/ nitrogen absorbed into blood stream is known as (A) Net protein utilisation (B) Protein efficiency ratio (C) Digestibility coefficient (D) Biological value of protein

Description : The percentage of ingested protein/ nitrogen absorbed into blood stream is known as (A) Net protein utilisation (B) Protein efficiency ratio (C) Digestibility coefficient (D) Biological value of protein

Last Answer : Answer : C

Portion of the installed reserve kept in operable condition but not placed...

Description : Portion of the installed reserve kept in operable condition but not placed in service to supply the peak load is known as________.

Last Answer : Portion of the installed reserve kept in operable condition but not placed in service to supply the peak load is known as Cold reserve.

For a short transmission line with r/x ratio of is 1.0, the regulation will be zero when the load power factor is

Description : For a short transmission line with r/x ratio of is 1.0, the regulation will be zero when the load power factor is

Last Answer : For a short transmission line with r/x ratio of is 1.0, the regulation will be zero when the load power factor is 0.707 lead

A generating station has a maximum demand of 50 Mw, a load factor of 60%, a plant capacity factor...

Description : A generating station has a maximum demand of 50 Mw, a load factor of 60%, a plant capacity factor of 45% and if the plant while running as per schedule, were fully loaded. The daily energy produced will be

Last Answer : A generating station has a maximum demand of 50 Mw, a load factor of 60%, a plant capacity factor of 45% and if the plant while running as per schedule, were fully loaded. The daily energy produced will be 720 MW.

An employer goes on employing more and more of a factor units until : (1) the Average Revenue Productivity becomes equal to Marginal Revenue Productivity. (2) the Marginal Revenue Productivity becomes zero. (3) the Diminishing Marginal Returns sets into operation. (4) the Marginal Revenue Productivity of a factor becomes equal to its reward.

Description : An employer goes on employing more and more of a factor units until : (1) the Average Revenue Productivity becomes equal to Marginal Revenue Productivity. (2) the Marginal Revenue Productivity becomes ... into operation. (4) the Marginal Revenue Productivity of a factor becomes equal to its reward.

Last Answer : (4) the Marginal Revenue Productivity of a factor becomes equal to its reward. Explanation: 'According to the Marginal Productivity Theory, the reward or the price of a factor unit depends upon its ... marginal cost of the factor is greater than MRP, it will reduce employment to reduce its loss.

An employer goes on employing more and more of a factor units until : (1) the Average Revenue Productivity becomes equal to Marginal Revenue Productivity. (2) the Marginal Revenue Productivity becomes zero. (3) the Diminishing Marginal Returns sets into operation. (4) the Marginal Revenue Productivity of a factor becomes equal to its reward.

Description : An employer goes on employing more and more of a factor units until : (1) the Average Revenue Productivity becomes equal to Marginal Revenue Productivity. (2) the Marginal Revenue Productivity becomes ... into operation. (4) the Marginal Revenue Productivity of a factor becomes equal to its reward.

Last Answer : the Marginal Revenue Productivity of a factor becomes equal to its reward.

A plant in your garden avoids photorespiratory losses, has improved water use efficiency, shows high rates of photosynthesis at high temperatures and has improved efficiency of nitrogen utilisation. In which of the following physiological groups would you assign this plant? (a) CAM (b) Nitrogen fixer (c) C3 (d) C4

Description : A plant in your garden avoids photorespiratory losses, has improved water use efficiency, shows high rates of photosynthesis at high temperatures and has improved efficiency of nitrogen utilisation. In which of the following ... you assign this plant? (a) CAM (b) Nitrogen fixer (c) C3 (d) C4

Last Answer : d) C4

Pick up the correct statement applicable to plate load test (A) Width of the test pit for plate load test is made five times the width of the plate (B) At the centre of the test pit, a hole is dug out whose size is kept equal to the size of the test plate (C) Bottom level of the hole dug at the centre of the test pit, is kept at the level of the actual formation (D) All the above

Description : Pick up the correct statement applicable to plate load test (A) Width of the test pit for plate load test is made five times the width of the plate (B) At the centre of the test pit, a hole is dug ... at the centre of the test pit, is kept at the level of the actual formation (D) All the above

Last Answer : Answer: Option D

In a simply supported beam (l + 2a) with equal overhangs (a) and carrying a uniformly distributed load over its entire length, B.M. at the middle point of the beam will be zero if (A) l = 2a (B) l = 4a (C) l < 2a (D) l > a

Description : In a simply supported beam (l + 2a) with equal overhangs (a) and carrying a uniformly distributed load over its entire length, B.M. at the middle point of the beam will be zero if (A) l = 2a (B) l = 4a (C) l < 2a (D) l > a

Last Answer : (A) l = 2a

The base of a column is subjected to moment. If the intensity of bearing pressure due to axial load is equal to stress due to moment, then the bearing pressure between the base and the concrete is (a) Uniform compression throughout (b) Zero at one end and compression at the other end (c) Tension at one end and compression at the other end (d) Compression, verying as a parabolic profile

Description : The base of a column is subjected to moment. If the intensity of bearing pressure due to axial load is equal to stress due to moment, then the bearing pressure between the base and the concrete ... Tension at one end and compression at the other end (d) Compression, verying as a parabolic profile

Last Answer : (b) Zero at one end and compression at the other end

A + (m - 1)ASC] known as equivalent concrete area of R.C.C. is given by (A) Modular ratio method (B) Load factor method (C) Ultimate load method (D) None of these

Description : A + (m - 1)ASC] known as equivalent concrete area of R.C.C. is given by (A) Modular ratio method (B) Load factor method (C) Ultimate load method (D) None of these

Last Answer : Answer: Option A

Rigidity factor for a tyre pressure greater than 7 kg/cm² is (A) Equal to 1 (B) Less than 1 (C) Greater than 1 (D) Zero

Description : Rigidity factor for a tyre pressure greater than 7 kg/cm² is (A) Equal to 1 (B) Less than 1 (C) Greater than 1 (D) Zero

Last Answer : Answer: Option B

The amount of energy required to produce a given degree of pulverisation depends primarily on a) Soil strength b) Energy utilisation efficiency of tool c) Both (a) and (b) d) None of the above

Description : The amount of energy required to produce a given degree of pulverisation depends primarily on a) Soil strength b) Energy utilisation efficiency of tool c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

Pledging of TD account as security in the name of a) The president of India or Governor of the state in his official capacity b) The reserve bank of India or a scheduled bank or a co-operative society c) Both the A and B d) None of these

Description : Pledging of TD account as security in the name of a) The president of India or Governor of the state in his official capacity b) The reserve bank of India or a scheduled bank or a co-operative society c) Both the A and B d) None of these

Last Answer : c) Both the A and B

The cross sections of the beams of equal length are a circle and a square whose permissible bending stress is same under same maximum bending. The ratio of their flexural weights is, (A) 1.118 (B) 1.338 (C) 1.228 (D) 1.108

Description : The cross sections of the beams of equal length are a circle and a square whose permissible bending stress is same under same maximum bending. The ratio of their flexural weights is, (A) 1.118 (B) 1.338 (C) 1.228 (D) 1.108

Last Answer : (A) 1.118

For a wall carrying heavy load on low bearing capacity soil, (A) Lean concrete bed is provided (B) Thick concrete bed is provided (C) Reinforced concrete bed is provided (D) Both (a) and (c) of the above

Description : For a wall carrying heavy load on low bearing capacity soil, (A) Lean concrete bed is provided (B) Thick concrete bed is provided (C) Reinforced concrete bed is provided (D) Both (a) and (c) of the above

Last Answer : Answer: Option D

Periodic testing of circuit breakers is necessary to assure that a correctly rated and properly installed unit _________________. A. can trip faster as it increases in age B. will continue to provide the original degree of protection C. does not exceed its interrupting capacity D. be able to withstand at least 125% of applied voltage

Description : Periodic testing of circuit breakers is necessary to assure that a correctly rated and properly installed unit _________________. A. can trip faster as it increases in age B. will continue to provide ... not exceed its interrupting capacity D. be able to withstand at least 125% of applied voltage

Last Answer : Answer: B

Tarapur (INDIA) atomic power station (A) Has two boiling water reactors of American design (B) Has an installed capacity of 400 MW (C) Is the first power reactor in India, which became critical in 1969 (D) All (A), (B) and (C)

Description : Tarapur (INDIA) atomic power station (A) Has two boiling water reactors of American design (B) Has an installed capacity of 400 MW (C) Is the first power reactor in India, which became critical in 1969 (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

As part of National Climate Change Policy, Indian government is planning to raise the installed capacity of renewable energy by the year 2030 to (A) 175 GW (B) 200 GW (C) 250 GW (D) 350 GW

Description : As part of National Climate Change Policy, Indian government is planning to raise the installed capacity of renewable energy by the year 2030 to (A) 175 GW (B) 200 GW (C) 250 GW (D) 350 GW

Last Answer : Answer: D

List any two Thermal Power Station in Maharashtra with their installed capacity.

Description : List any two Thermal Power Station in Maharashtra with their installed capacity. 

Last Answer :  Thermal Power Station in Maharashtra with their installed capacity :

The ratio of the length and diameter of a simply supported uniform circular beam which experiences maximum bending stress equal to tensile stress due to same load at its mid span, is (A) 1/8 (B) 1/4 (C) 1/2 (D) 1/3

Description : The ratio of the length and diameter of a simply supported uniform circular beam which  experiences maximum bending stress equal to tensile stress due to same load at its mid span, is  (A) 1/8  (B) 1/4  (C) 1/2  (D) 1/3 

Last Answer : (C) 1/2 

The ratio of the length and depth of a simply supported rectangular beam which experiences maximum bending stress equal to tensile stress, due to same load at its mid span, is (A) 1/2 (B) 2/3 (C) 1/4 (D) 1/3

Description : The ratio of the length and depth of a simply supported rectangular beam which experiences  maximum bending stress equal to tensile stress, due to same load at its mid span, is  (A) 1/2  (B) 2/3  (C) 1/4  (D) 1/3

Last Answer : (B) 2/3 

A simply supported beam which carries a uniformly distributed load has two equal overhangs. To have maximum B.M. produced in the beam least possible, the ratio of the length of the overhang to the total length of the beam, is (A) 0.207 (B) 0.307 (C) 0.407 (D) 0.508

Description : A simply supported beam which carries a uniformly distributed load has two equal overhangs. To  have maximum B.M. produced in the beam least possible, the ratio of the length of the overhang  to the total length of the beam, is  (A) 0.207  (B) 0.307  (C) 0.407  (D) 0.508 

Last Answer : (A) 0.207 

A uniformly distributed load (w) of length shorter than the span crosses a girder. The bending moment at a section in the girder will be maximum when (a) Head of the load is at the section (b) Tail of the load is at the section (c) Section divides the load in the same ratio as it divides the span (d) Section divides the load in two equal lengths.

Description : A uniformly distributed load (w) of length shorter than the span crosses a girder. The bending moment at a section in the girder will be maximum when (a) Head of the load is at the section (b) Tail ... load in the same ratio as it divides the span (d) Section divides the load in two equal lengths.

Last Answer : (c) Section divides the load in the same ratio as it divides the span

In the expression of dynamic load capacity P=XVF r + YF a , Y stands for? (a) Race rotation factor (b) Radial load factor (c) Thrust load factor (d) Service factor

Description : In the expression of dynamic load capacity P=XVF r + YF a , Y stands for? (a) Race rotation factor (b) Radial load factor (c) Thrust load factor (d) Service factor

Last Answer : (c) Thrust load factor

In the expression of dynamic load capacity P=XVF r + YF a , X stands for? (a) Race rotation factor (b) Radial load factor (c) Thrust load factor (d) Service factor

Description : In the expression of dynamic load capacity P=XVF r + YF a , X stands for? (a) Race rotation factor (b) Radial load factor (c) Thrust load factor (d) Service factor

Last Answer : (b) Radial load factor

In the expression of dynamic load capacity P=XVF r + YF a , V stands for? (a) Race rotation factor (b) Radial load factor (c) Thrust load factor (d) Service factor

Description : In the expression of dynamic load capacity P=XVF r + YF a , V stands for? (a) Race rotation factor (b) Radial load factor (c) Thrust load factor (d) Service factor

Last Answer : (a) Race rotation factor

In the expression of dynamic load capacity P=XVF(r) + YF(a), V stands for ? a) Race rotation factor b) Radial factor c) Thrust factor d) None of the listed

Description : In the expression of dynamic load capacity P=XVF(r) + YF(a), V stands for ? a) Race rotation factor b) Radial factor c) Thrust factor d) None of the listed

Last Answer : a) Race rotation factor

In induction motors, the length of air gap in kept as small as mechanically possible is order to have (a) low power factor (b) high power factor (c) high over load capacity (d) any of the above

Description : In induction motors, the length of air gap in kept as small as mechanically possible is order to have (a) low power factor (b) high power factor (c) high over load capacity (d) any of the above

Last Answer : (b) high power factor

Which of the following relation is incorrect? A) capacity factor = utilization factor x load factor B) load factor

Description : Which of the following relation is incorrect? A) capacity factor = utilization factor x load factor B) load factor x maximum load = average load C) demand factor x connected load = maximum demand D) none of these

Last Answer : Which of the following relation is incorrect? A) capacity factor = utilization factor x load factor B) load factor x maximum load = average load C) demand factor x connected load = maximum demand D) none of these

Power station having Load factor = 70%, capacity factor = 50%, used factor = 60%, maximum demand = 20MW

Description : Power station having Load factor = 70%, capacity factor = 50%, used factor = 60%, maximum demand = 20MW then annual energy production is  (1) 122.8 GWh (2) 198.55 GWh (3) 128.2 GWh (4) 188.82 GWh

Last Answer : Power station having Load factor = 70%, capacity factor = 50%, used factor = 60%, maximum demand = 20MW then annual energy production is 122.8 GWh

Euler's formula states that the buckling load for a column of length , both ends hinged and whose least moment of inertia and modulus of elasticity of the material of the column are and respectively, is given by the relation (A) P = ²EI/l² (B) P = /EI (C) P = /l² (D) P = ²EI/l

Description : Euler's formula states that the buckling load for a column of length , both ends hinged and whose least moment of inertia and modulus of elasticity of the material of the column are and respectively, is given by the relation (A) P = ²EI/l² (B) P = /EI (C) P = /l² (D) P = ²EI/l

Last Answer : (A) P = ²EI/l²