30. The ratio of current year‘s production to the reference year‘s production is called as a) Demand factor b) Production factor c) Utilisation factor d) Load factor

The ratio of current year‘s production to the reference year‘s production is called as a) Demand factor b) Production factor c) Utilisation factor d) Load factor
by

1 Answer

Answer :

Production factor 

by

Related questions

The ratio of the average load to the installed capacity of the plant whose reserve capacity is zero will be equal to (A) Load factor (B) Plant factor (C) Utilisation factor (D) Both (A) and (B)

Description : The ratio of the average load to the installed capacity of the plant whose reserve capacity is zero will be equal to (A) Load factor (B) Plant factor (C) Utilisation factor (D) Both (A) and (B)

Last Answer : Answer: Option D

Need of farm mechanization is to... a) for timely operations of agriculture activities b) to increase the production and productivity of food grains. c) efficient utilisation of inputs, water and other natural resources. d) all of the above

Description : Need of farm mechanization is to... a) for timely operations of agriculture activities b) to increase the production and productivity of food grains. c) efficient utilisation of inputs, water and other natural resources. d) all of the above

Last Answer : all of the above

Capacity utilisation (1) is usually near 100 percent. (2) represents the percent of the labour force that is employed. (3) is a measure of the proportional of the existing capital stock used for current production. (4) rises as the economy moves into a recession, since firms must replace unemployed workers with some other resources to maintain production.

Description : Capacity utilisation (1) is usually near 100 percent. (2) represents the percent of the labour force that is employed. (3) is a measure of the proportional of the existing capital ... into a recession, since firms must replace unemployed workers with some other resources to maintain production.

Last Answer : is a measure of the proportional of the existing capital stock used for current production.

The strategy of adjusting and optimising energy using systems and procedures so as to reduce energy requirements per unit of output while holding constant or reducing total cost of producing the output from the systems is…………. a) Energy Management b) Energy audit c) Energy utilisation d) Energy wastage

Description : The strategy of adjusting and optimising energy using systems and procedures so as to reduce energy requirements per unit of output while holding constant or reducing total cost of producing the output from the ... is . a) Energy Management b) Energy audit c) Energy utilisation d) Energy wastage

Last Answer : Energy Management

19. For a cement plant the parameter, ―kWh/MT of clinker ―indicates a) Energy Index parameter b) Utility factor c) Production factor d) Load factor

Description : For a cement plant the parameter, ―kWh/MT of clinker ―indicates a) Energy Index parameter b) Utility factor c) Production factor d) Load factor

Last Answer : Utility factor

For a cement plant the parameter, ―kWh/MT of clinker ―indicates c) Energy Index parameter c) Production factor d) Utility factor d) load factor

Description : For a cement plant the parameter, ―kWh/MT of clinker ―indicates c) Energy Index parameter c) Production factor d) Utility factor d) load factor

Last Answer :  Energy Index parameter

For a cement plant the parameter, ―kWh/MT of clinker ―indicates a) Energy Index parameter c) Production factor b) Utility factor d) load factor

Description : For a cement plant the parameter, ―kWh/MT of clinker ―indicates a) Energy Index parameter c) Production factor b) Utility factor d) load factor

Last Answer : Energy Index parameter

Traffic intensity in Queuing Theory is also called........................... a. Service factor b. Arrival factor c. Utilisation factor d. None of these

Description : Traffic intensity in Queuing Theory is also called........................... a. Service factor b. Arrival factor c. Utilisation factor d. None of these

Last Answer : c. Utilisation factor

A generating station has a maximum demand of 30 MW, a load factor of 60% and a plant

Description : A generating station has a maximum demand of 30 MW, a load factor of 60% and a plant capacity factor of 50%. The reserve capacity of the plant is   (a) 5 MW (b) 4 MW (c) 6 MW (d) 10 MW 

Last Answer : A generating station has a maximum demand of 30 MW, a load factor of 60% and a plant capacity factor of 50%. The reserve capacity of the plant is 6 MW

Gantt chart (or Bar chart) is helpful in (A) Efficient utilisation of manpower and machines (B) Preparing production schedule (C) Efficient despatching of products (D) Inventory control

Description : Gantt chart (or Bar chart) is helpful in (A) Efficient utilisation of manpower and machines (B) Preparing production schedule (C) Efficient despatching of products (D) Inventory control

Last Answer : (B) Preparing production schedule

The percentage of food nitrogen that is retained in the body represents (A) Digestibility coefficient (B) Biological value of proteins (C) Protein efficiency ratio (D) Net protein utilisation

Description : The percentage of food nitrogen that is retained in the body represents (A) Digestibility coefficient (B) Biological value of proteins (C) Protein efficiency ratio (D) Net protein utilisation

Last Answer : Answer : D

In a person increase in weight in gms per gm of protein consumption represents (A) Protein efficiency ratio (B) Digestibility value of proteins (C) Biological value of proteins (D) Net protein utilisation

Description : In a person increase in weight in gms per gm of protein consumption represents (A) Protein efficiency ratio (B) Digestibility value of proteins (C) Biological value of proteins (D) Net protein utilisation

Last Answer : Answer : A

The percentage of nitrogen retained in the body after absorption of diet represents (A) Digestibility coefficient of proteins (B) Biological value of proteins (C) Protein efficiency ratio (D) Net protein utilisation

Description : The percentage of nitrogen retained in the body after absorption of diet represents (A) Digestibility coefficient of proteins (B) Biological value of proteins (C) Protein efficiency ratio (D) Net protein utilisation

Last Answer : Answer : B

The gain in body weight (gm) per gm of protein ingested is known as (A) Net protein utilisation (B) Protein efficiency ratio (C) Digestibility coefficient (D) Biological value of protein

Description : The gain in body weight (gm) per gm of protein ingested is known as (A) Net protein utilisation (B) Protein efficiency ratio (C) Digestibility coefficient (D) Biological value of protein

Last Answer : Answer : B

Net protein utilisation depends upon (A) Protein efficiency ratio (B) Digestibility coefficient (C) Digestibility coefficient and protein efficiency ratio (D) Digestibility coefficient and biological value

Description : Net protein utilisation depends upon (A) Protein efficiency ratio (B) Digestibility coefficient (C) Digestibility coefficient and protein efficiency ratio (D) Digestibility coefficient and biological value

Last Answer : Answer : D

The percentage of ingested protein/ nitrogen absorbed into blood stream is known as (A) Net protein utilisation (B) Protein efficiency ratio (C) Digestibility coefficient (D) Biological value of protein

Description : The percentage of ingested protein/ nitrogen absorbed into blood stream is known as (A) Net protein utilisation (B) Protein efficiency ratio (C) Digestibility coefficient (D) Biological value of protein

Last Answer : Answer : C

34. The percentage of energy saved at the current rate of use, compared to the reference year rate of use, is called a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Description : The percentage of energy saved at the current rate of use, compared to the reference year rate of use, is called a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Last Answer : Energy Performance

A manufacturing industry plans to improve its energy performance under PAT through implementation of an energy conservation scheme. After implementation, calculate the Plant Energy Performance (PEP) with 2015-16 as the reference year. What is your inference? Given that:  The current year (2016-17 ) Annual Production – 28,750 T ,  Current year (2016-17 ) Annual Energy Consumption– 23,834 MWh,  Reference year (2015-16 ) production - 34,000 T,  Reference year (2015-16 ) Energy consumption - 27,200 MWh.

Description : A manufacturing industry plans to improve its energy performance under PAT through  implementation of an energy conservation scheme. After implementation, calculate the  Plant Energy Performance (PEP) with 2015-16 as the ... 34,000 T,   Reference year (2015-16 ) Energy consumption - 27,200 MWh.

Last Answer : Production factor (PF) = 28750/34000 = 0.846 …………………….1 mark Ref year equivalent energy (RYEE) = Ref Year Energy Use (RYEU) x PF   = 27,200 x 0.846= 23011MWh

Which are the reference fuels for knock rating of S.I. engines ?

Description : Which are the reference fuels for knock rating of S.I. engines ?

Last Answer : n-heptane and ISO-octane.

Why iso-octane is chosen as reference fuel for S.I. engines and allotted 100 value for its octane number ?

Description : Why iso-octane is chosen as reference fuel for S.I. engines and allotted 100 value for its octane number ?

Last Answer : Iso-octane permits highest compression without causing knocking.

Why iso-octane is chosen as reference fuel for S.I. engines and allotted 100 value for its octane number ?

Description : Why iso-octane is chosen as reference fuel for S.I. engines and allotted 100 value for its octane number ?

Last Answer : Iso-octane permits highest compression without causing knocking

)The demand of a commodity is a direct demand but the demand of a factor of production is called a - (1) Crossed demand (2) Joint demand (3) Derived demand (4) Independent demand

Description : )The demand of a commodity is a direct demand but the demand of a factor of production is called a - (1) Crossed demand (2) Joint demand (3) Derived demand (4) Independent demand

Last Answer : (3) Derived demand Explanation: In the words of McConnell, the demand for factors of production is a derived demand that is derived from the finished goods and services which resources help to produce. ... demand, demand for factors is derived demand. It is based on the productivity of the factors.

The demand of a commodity is a direct demand but the demand of a factor of production is called a (1) Crossed demand (2) Joint demand (3) Derived demand (4) Independent demand

Description : The demand of a commodity is a direct demand but the demand of a factor of production is called a (1) Crossed demand (2) Joint demand (3) Derived demand (4) Independent demand

Last Answer : Derived demand

Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or load resistor B. noise factor expressed in decibels C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signal D. S/N of an ideal system divided by S/N at the output of the receiver or amplifier under test, both working at the same temperature over the same bandwidth and fed from the same source

Description : Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or ... under test, both working at the same temperature over the same bandwidth and fed from the same source

Last Answer : C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signals

Define the following: Average demand, Maximum demand, Demand factor, Load factor.

Description : Define the following: Average demand, Maximum demand, Demand factor, Load factor.

Last Answer : Average Demand: the average power requirement during some specified period of time of considerable duration is called the average demand of installation. Maximum Demand: The maximum demand of an installation ... Load Factor: It is defined as the ratio of the average power to the maximum demand.

A generating station has a maximum demand of 500 MW. The annual load factor is 50 percent. The energy

Description : A generating station has a maximum demand of 500 MW. The annual load factor is 50 percent. The energy generated per annum will be: A) 2.19 x 106 MWhr B) 600 MWhr C) 250 MWhr D) 7.50 x 106 MWhr

Last Answer : A generating station has a maximum demand of 500 MW. The annual load factor is 50 percent. The energy generated per annum will be: 2.19 x 106 MWhr 

The connected load of a consumer is 2 kW and his maximum demand is 1.5 kW. The load factor of the

Description : The connected load of a consumer is 2 kW and his maximum demand is 1.5 kW. The load factor of the consumer is (a) 0.375 (b) 0.75 (c) 1.33 (d) None of these  

Last Answer : a

Power station having Load factor = 70%, capacity factor = 50%, used factor = 60%, maximum demand = 20MW

Description : Power station having Load factor = 70%, capacity factor = 50%, used factor = 60%, maximum demand = 20MW then annual energy production is  (1) 122.8 GWh (2) 198.55 GWh (3) 128.2 GWh (4) 188.82 GWh

Last Answer : Power station having Load factor = 70%, capacity factor = 50%, used factor = 60%, maximum demand = 20MW then annual energy production is 122.8 GWh

In a power generating station the Demand Factor and Load Factor are 0.5 and 0.2, respectively. If the...

Description : In a power generating station the Demand Factor and Load Factor are 0.5 and 0.2, respectively. If the connected load is 400 MW, the average demand is (A) 40 MW (B) 100 MW (C) 140 MW (D) 280 MW

Last Answer : In a power generating station the Demand Factor and Load Factor are 0.5 and 0.2, respectively. If the connected load is 400 MW, the average demand is 40 MW

The maximum demand of consumer is 2 kW and his daily energy consumption is 20 units. Its Load Factor is

Description : The maximum demand of consumer is 2 kW and his daily energy consumption is 20 units. Its Load Factor is (1) 10.15% (2) 41.6 % (3) 50 % (4) 60% 

Last Answer : Total maximum demand of energy in a day = 2kw*24= 48 units Consumer consumption is 20 units . Load factor = (number of units utilizing)/(total max. demand)      = 20/48 = 41.6%

A generating st ation has a maximum, demand of 20 mW, load factor of 60%,...

Description : A generating st ation has a maximum, demand of 20 mW, load factor of 60%, a plant capacity factor of 50% and a plant Use factor of 72%. What is the reserve capacity of the plant, if the plant, while running as per schedule, were fully loaded?

Last Answer : 5 MW is the reserve capacity of the plant, if the plant, while running as per schedule, were fully loaded.

A generating station has a maximum demand of 50 Mw, a load factor of 60%, a plant capacity factor...

Description : A generating station has a maximum demand of 50 Mw, a load factor of 60%, a plant capacity factor of 45% and if the plant while running as per schedule, were fully loaded. The daily energy produced will be

Last Answer : A generating station has a maximum demand of 50 Mw, a load factor of 60%, a plant capacity factor of 45% and if the plant while running as per schedule, were fully loaded. The daily energy produced will be 720 MW.

The Earth Summit held in Rio de Janeiro in 1992 was called (a) for immediate steps to discontinue use of CFCs that were damaging the ozone layer (b) to reduce CO2 emissions and global warming (c) for conservation of biodiversity and sustainable utilisation of its benefits (d) to assess threat posed to native species by invasive weed species.

Description : The Earth Summit held in Rio de Janeiro in 1992 was called (a) for immediate steps to discontinue use of CFCs that were damaging the ozone layer (b) to reduce CO2 emissions and global ... utilisation of its benefits (d) to assess threat posed to native species by invasive weed species.

Last Answer : (c) for conservation of biodiversity and sustainable utilisation of its benefits

The demand of a factor of production is (1) direct (2) derived (3) neutral (4) discretion of the producer

Description : The demand of a factor of production is (1) direct (2) derived (3) neutral (4) discretion of the producer

Last Answer : (2) derived Explanation: There are 4 factors of production; land, labor, capital and entrepreneurship. The demand for the factors of production is a derived demand. That means these factors of production are demanded because there is a demand for the end product they produce.

Elasticity of demand measures the A.Sensitivity of sales to changes in a particular causal factor B.Sensitivity of production to changes in a particular cost C.Value of price and cost D.Volume of product

Description : Elasticity of demand measures the A.Sensitivity of sales to changes in a particular causal factor B.Sensitivity of production to changes in a particular cost C.Value of price and cost D.Volume of product

Last Answer : A.Sensitivity of sales to changes in a particular causal factor

The central problem of how to produce is resolved by (a) Demand and supply of factor inputs ; (b) Demand and supply of goods; (c) Relative prices and availability of factors of production ; (d) Government intervention

Description : The central problem of how to produce is resolved by (a) Demand and supply of factor inputs ; (b) Demand and supply of goods; (c) Relative prices and availability of factors of production ; (d) Government intervention

Last Answer : (c) Relative prices and availability of factors of production

The demand of a factor of production is (1) direct (2) derived (3) neutral (4) discretion of the producer

Description : The demand of a factor of production is (1) direct (2) derived (3) neutral (4) discretion of the producer

Last Answer : derived

square cross section b/h/h'=400/400/40mm with a reinforcement ratio of p=0.015 is loaded for action forces of axial load plus uniaxial bending.the column is to be made of C25/30 concrete & S-460 steel.check whether the column AB is short or long?

Description : square cross section b/h/h'=400/400/40mm with a reinforcement ratio of p=0.015 is loaded for action forces of axial load plus uniaxial bending.the column is to be made of C25/30 concrete & S-460 steel.check whether the column AB is short or long?

Last Answer : 10001/999900

‘’ Intensive utilisation of railway track is need of the hour.’’ Justify this statement. -Geography

Description : ‘’ Intensive utilisation of railway track is need of the hour.’’ Justify this statement. -Geography

Last Answer : Growth in population has led to the increase in transport traffic in railways. Also, there is an increase in the transport goods from one place to another. Due to these reasons, the ... statement given above justifies the need for the maintenance of tracts as its utilisation has been increased.

Which resources are surveyed and determined on the basis of their quantity and quality for utilisation ? -SST 10th

Description : Which resources are surveyed and determined on the basis of their quantity and quality for utilisation ? -SST 10th

Last Answer : Developed resources.

Hormone which enhance cellular uptake and utilisation of glucose as well as does hypoglycemia through glucogenesis is

Description : Hormone which enhance cellular uptake and utilisation of glucose as well as does hypoglycemia through glucogenesis is

Last Answer : Hormone which enhance cellular uptake and utilisation of glucose as well as does hypoglycemia through glucogenesis is

In India the problem of utilisation of agricultural wastes is in (a) Conversion of cellulose into sugar (b) Conversion of bran into molasses (c) Conversion of starch into alcohol (d) Conversion of sugar into carbohydrates

Description : In India the problem of utilisation of agricultural wastes is in (a) Conversion of cellulose into sugar (b) Conversion of bran into molasses (c) Conversion of starch into alcohol (d) Conversion of sugar into carbohydrates

Last Answer : Ans: (a)

Consider the following problems being faced by the Indian Coal Industry : 1. Poor quality of coal and bottlenecks in the coal movement 2. Low utilisation capacity of washeries 3. Growing dependence on the import of coking coal 4. Administered prices Which of the above are correct? [BPSC 2011] (a) II, III and IV (b) I, II, III and IV (c) I, III and IV (d) I, II and III

Description : Consider the following problems being faced by the Indian Coal Industry : 1. Poor quality of coal and bottlenecks in the coal movement 2. Low utilisation capacity of washeries 3. Growing dependence on the import of coking coal 4. ... (b) I, II, III and IV (c) I, III and IV (d) I, II and III

Last Answer : Ans: (b)

Ketosis reflects (A) Increased hepatic glucose liberation (B) Increased fatty acid oxidation (C) Increased carbohydrate utilisation (D) Incresed gluconeogenesis

Description : Ketosis reflects (A) Increased hepatic glucose liberation (B) Increased fatty acid oxidation (C) Increased carbohydrate utilisation (D) Incresed gluconeogenesis

Last Answer : Answer : B

Impaired galactose tolerance test suggests (A) Defect in glucose utilisation (B) Liver cell injury (C) Renal defect (D) Muscle injury

Description : Impaired galactose tolerance test suggests (A) Defect in glucose utilisation (B) Liver cell injury (C) Renal defect (D) Muscle injury

Last Answer : Answer : B

Net protein utilisation of egg protein is (A) 75% (B) 80% (C) 91% (D) 72%

Description : Net protein utilisation of egg protein is (A) 75% (B) 80% (C) 91% (D) 72%

Last Answer : Answer : C

Nitrogen fixation is a process of - (1) Assimilation of nitrate (2) Utilisation of nitrogen gas (3) Conversion of organic nitrogen to proteins (4) Conversion of molecular nitrogen to ammonia

Description : Nitrogen fixation is a process of - (1) Assimilation of nitrate (2) Utilisation of nitrogen gas (3) Conversion of organic nitrogen to proteins (4) Conversion of molecular nitrogen to ammonia

Last Answer : (4) Conversion of molecular nitrogen to ammonia Explanation: Nitrogen fixation is a process by which nitrogen in the Earth's atmosphere is converted into ammonia (NH3) or other molecules available ... plants as nutrients. The conversion of organic nitrogen to proteins is achieved in Nitrogen cycle.

Utilisation of ketone bodies by peripheral tissues needs which enzyme?

Description : Utilisation of ketone bodies by peripheral tissues needs which enzyme?

Last Answer : Succinyl CoA dependent thiophorase.

Ketone body utilisation is taking place in which organs?

Description : Ketone body utilisation is taking place in which organs?

Last Answer : Ketolysis is taking place in extra hepatic tissues. (All other tissues, except liver).