Silicon percentage in silicon steel used for electrical equipments is about (A) 1 (B) 4.0 (C) 8 (D) 14

Silicon percentage in silicon steel used for electrical equipments is about
(A) 1
(B) 4.0
(C) 8
(D) 14
by

1 Answer

Answer :

Option B
by

Related questions

Silicon percentage in the silicon steel used for electrical appliances/equipments is (A) 0.3-0.4 (B) 12-14 (C) 3-4 (D) 20-25

Description : Silicon percentage in the silicon steel used for electrical appliances/equipments is (A) 0.3-0.4 (B) 12-14 (C) 3-4 (D) 20-25

Last Answer : Option C

Straight silicon steel (containing Si from 0.5 to 5%) because of their low hysteresis loss and high magnetic permeability are used for electrical appliances. Which of the following electrical appliances made of silicon steel contains maximum percentage of silicon (about 4%)? (A) Armature of small motors/generators (B) Generators and small motors (C) Induction motors (D) High frequency transformers

Description : Straight silicon steel (containing Si from 0.5 to 5%) because of their low hysteresis loss and high magnetic permeability are used for electrical appliances. Which of the following electrical ... /generators (B) Generators and small motors (C) Induction motors (D) High frequency transformers

Last Answer : (D) High frequency transformers

Work hardenable alloy steel used to make the bucket wheel excavators, blades of bulldozers and other earth moving equipments contain iron, carbon and (A) Manganese (B) Silicon (C) Nickel (D) Chromium

Description : Work hardenable alloy steel used to make the bucket wheel excavators, blades of bulldozers and other earth moving equipments contain iron, carbon and (A) Manganese (B) Silicon (C) Nickel (D) Chromium

Last Answer : (A) Manganese

Silicon percentage in acid resistant cast iron is about (A) 4 (B) 8 (C) 14 (D) 20

Description : Silicon percentage in acid resistant cast iron is about (A) 4 (B) 8 (C) 14 (D) 20

Last Answer : (C) 14

Silicon percentage in acid resistant cast iron is about (A) 4 (B) 8 (C) 14 (D) 20

Description : Silicon percentage in acid resistant cast iron is about (A) 4 (B) 8 (C) 14 (D) 20

Last Answer : (A) 4

Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction (D) Nichrome, a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C

Description : Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction ... , a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C

Last Answer : (B) Presence of silicon in steel decreases its electrical resistance

Which of the following alloy steels has the energy saving properties making it suitable for use in electrical machines? (A) Silicon steel (B) Chromium steel (C) Molybdenum steel (D) None of these

Description : Which of the following alloy steels has the energy saving properties making it suitable for use in electrical machines? (A) Silicon steel (B) Chromium steel (C) Molybdenum steel (D) None of these

Last Answer : (A) Silicon steel

Carbon percentage is the same in cast iron and (A) Wrought iron(B) Pig iron(C) Mild steel(D) High silicon (14%) iron

Description : Carbon percentage is the same in cast iron and (A) Wrought iron (B) Pig iron (C) Mild steel (D) High silicon (14%) iron

Last Answer : (B) Pig iron

Silicon steel is used in electrical machines because it has?

Description : Silicon steel is used in electrical machines because it has?

Last Answer : Silicon steel is used in electrical machines because it has low hysteresis loss.

Silicon percentage in iron castings to have maximum hardness should be about (A) 0.3 (B) 0.5 (C) 0.8 (D) 2.5

Description : Silicon percentage in iron castings to have maximum hardness should be about (A) 0.3 (B) 0.5 (C) 0.8 (D) 2.5

Last Answer : (C) 0.8

Which of the following is not a source of ozone emission in the atmosphere? (A) Refrigerators (B) Xerox machines (C) Dermatological photo-therapy equipments (D) High voltage electrical equipments

Description : Which of the following is not a source of ozone emission in the atmosphere? (A) Refrigerators (B) Xerox machines (C) Dermatological photo-therapy equipments (D) High voltage electrical equipments

Last Answer : (A) Refrigerators

Chemical engineering plant cost index is used for finding the present cost of a particular chemical plant, if the cost of similar plant at some time in the past is known. The present cost of the plant = original cost × (index value at present/ index value at time original cost was obtained). The most major component of this cost index is (A) Fabricated equipment and machinery (B) Process instruments and control (C) Pumps and compressor (D) Electrical equipments and material

Description : Chemical engineering plant cost index is used for finding the present cost of a particular chemical plant, if the cost of similar plant at some time in the past is known. The present cost of ... (B) Process instruments and control (C) Pumps and compressor (D) Electrical equipments and material

Last Answer : (A) Fabricated equipment and machinery

Alinco, which is a aluminium-cobalt-nickel steel, is used for making (A) Surgical instruments (B) Powerful magnets (C) Chemical equipments (D) Boiler tubes

Description : Alinco, which is a aluminium-cobalt-nickel steel, is used for making (A) Surgical instruments (B) Powerful magnets (C) Chemical equipments (D) Boiler tubes

Last Answer : (B) Powerful magnets

What are the safety precautions when working on electrical equipments?

Description : What are the safety precautions when working on electrical equipments?

Last Answer : Switch off power, wear proper protective clothing, safety shoes, Notice board : Do not switch on - Men at work, stand on rubber mat, remove metal rings, watch bracelets, use proper insulated tools, ... work permit. In case of electrical shock, give proper first aid, check heart beat and pulse.

List any four internal causes for abnormal operation of electrical equipment’s.

Description : List any four internal causes for abnormal operation of electrical equipment’s. 

Last Answer : Internal causes:- 1. Open circuit 2. Short circuit 3. Earth fault 4. Loose connection 5. Deposit of dirt and dust near ventilation passage 6. Low insulation resistance 7. Improper maintenance 8. Poor ... problems 13. Failure of cooling system 14. Excess wear and tear of internal parts 15. Ageing.

The usual values of maximum flux densities for distribution transformers using hot rolled silicon steel are (a) 0.5 to 0.8 Wb/m2 (b) 0.8 to 1.0 Wb/m2 (c) 1.1 to 1.35 Wb/m2 (d) 1.4 to 1.8 Wb/m2

Description : The usual values of maximum flux densities for distribution transformers using hot rolled silicon steel are (a) 0.5 to 0.8 Wb/m2 (b) 0.8 to 1.0 Wb/m2 (c) 1.1 to 1.35 Wb/m2 (d) 1.4 to 1.8 Wb/m2

Last Answer : (c) 1.1 to 1.35 Wb/m2

Most suitable material for high pressure vessel operating at 500 atm. and 500° C is (A) Molybdenum stainless steel(B) 18/8 stainless steel(C) Mild steel(D) High silicon iron (14% Si)

Description : Most suitable material for high pressure vessel operating at 500 atm. and 500° C is (A) Molybdenum stainless steel (B) 18/8 stainless steel (C) Mild steel (D) High silicon iron (14% Si)

Last Answer : (A) Molybdenum stainless steel

Addition of 0.3 to 4.5% silicon to iron _____ the electrical resistivity of iron.

Last Answer : Addition of 0.3 to 4.5% silicon to iron increases the electrical resistivity of iron.

Carbon percentage in medium carbon steel is around (A) 0.1 to 0.35 (B) 0.35 to 0.5 (C) 0.8 to 1.4 (D) 1 to 1. 5

Description : Carbon percentage in medium carbon steel is around (A) 0.1 to 0.35 (B) 0.35 to 0.5 (C) 0.8 to 1.4 (D) 1 to 1. 5

Last Answer : (B) 0.35 to 0.5

The fermenter used in the production of penicillin (by deep fermentation process) is made of (A) Glass (B) Glass lined steel (C) High silicon cast iron (D) Porcelain

Description : The fermenter used in the production of penicillin (by deep fermentation process) is made of (A) Glass (B) Glass lined steel (C) High silicon cast iron (D) Porcelain

Last Answer : (B) Glass lined steel

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

Specify the material of construction suitable for handling concentrated HNO3 at 100°C. (A) High silicon iron, Kel-F and Teflon (B) Tin and wood (C) Silicone rubber (D) Stainless steel

Description : Specify the material of construction suitable for handling concentrated HNO3 at 100°C. (A) High silicon iron, Kel-F and Teflon (B) Tin and wood (C) Silicone rubber (D) Stainless steel

Last Answer : (A) High silicon iron, Kel-F and Teflon

__________ steel is widely used for the manufacture of motor car crankshafts. (A) Silicon (B) Nickel (C) Chrome (D) High speed

Description : __________ steel is widely used for the manufacture of motor car crankshafts. (A) Silicon (B) Nickel (C) Chrome (D) High speed

Last Answer : (C) Chrome

Concentrated HCl at 30°C can be stored in a vessel made of (A) PTFE and porcelain (B) Cast iron and aluminium (C) Stainless steel and high silicon cast iron (D) None of these

Description : Concentrated HCl at 30°C can be stored in a vessel made of (A) PTFE and porcelain (B) Cast iron and aluminium (C) Stainless steel and high silicon cast iron (D) None of these

Last Answer : (A) PTFE and porcelain

Presence of silicon in steel (A) Is in the form of free Si (B) Indicates that steel is not deoxidised properly(C) Decreases the blow holes formation tendency in castings(D) None of these

Description : Presence of silicon in steel (A) Is in the form of free Si (B) Indicates that steel is not deoxidised properly (C) Decreases the blow holes formation tendency in castings (D) None of these

Last Answer : (C) Decreases the blow holes formation tendency in castings

Hypersil' is a __________ steel. (A) High speed (B) Silicon (C) Molybdenum (D) Tungsten

Description : Hypersil' is a __________ steel. (A) High speed (B) Silicon (C) Molybdenum (D) Tungsten

Last Answer : (B) Silicon

H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin

100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain

Description : 100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain

Last Answer : (C) Aluminium, tin and rubber

Which of the following exercises most powerful influence on the mechanical properties of steel? (A) Manganese (B) Carbon (C) Phosphorous (D) Silicon

Description : Which of the following exercises most powerful influence on the mechanical properties of steel? (A) Manganese (B) Carbon (C) Phosphorous (D) Silicon

Last Answer : (B) Carbon

Rotary driers are generally made of (A) Cast iron (B) Mild steel (C) High silicon iron (14% Si) (D) Tin lined with refractory bricks

Description : Rotary driers are generally made of (A) Cast iron (B) Mild steel (C) High silicon iron (14% Si) (D) Tin lined with refractory bricks

Last Answer : (B) Mild steel

The 'bomb' in the bomb calorimeter is made of (A) Molybdenum stainless steel(B) Mild steel(C) High silicon iron (14% Si)(D) Copper

Description : The 'bomb' in the bomb calorimeter is made of (A) Molybdenum stainless steel (B) Mild steel (C) High silicon iron (14% Si) (D) Copper

Last Answer : (A) Molybdenum stainless steel

Copper is dissolved from its ore by H2SO4 in a percolation tank made of (A) Wood (B) Stainless steel (C) Reinforced concrete lined with lead (D) High silicon iron (14% Si)

Description : Copper is dissolved from its ore by H2SO4 in a percolation tank made of (A) Wood (B) Stainless steel (C) Reinforced concrete lined with lead (D) High silicon iron (14% Si)

Last Answer : (C) Reinforced concrete lined with lead

__________ is added in low carbon steel to raise its yield point. (A) Sulphur (B) Phosphorous (C) Silicon (D) Manganese

Description : __________ is added in low carbon steel to raise its yield point. (A) Sulphur (B) Phosphorous (C) Silicon (D) Manganese

Last Answer : (D) Manganese

Carbon tetrachloride can be stored in a storage vessel made of (A) High silicon iron (14% Si) (B) Tin (C) Stainless steel (D) All (A), (B) and (C)

Description : Carbon tetrachloride can be stored in a storage vessel made of (A) High silicon iron (14% Si) (B) Tin (C) Stainless steel (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Neutraliser tank used for reacting nitric acid with ammonia for the production of ammonium nitrate is made of (A) Aluminium (B) Stainless steel (C) High silicon (14%) iron (D) Copper

Description : Neutraliser tank used for reacting nitric acid with ammonia for the production of ammonium nitrate is made of (A) Aluminium (B) Stainless steel (C) High silicon (14%) iron (D) Copper

Last Answer : (B) Stainless steel

Which of the following finds the least commercial use? (A) Pure iron (B) High silicon iron (C) Low carbon steel (D) High carbon steel

Description : Which of the following finds the least commercial use? (A) Pure iron (B) High silicon iron (C) Low carbon steel (D) High carbon steel

Last Answer : (A) Pure iron

Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Description : Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Last Answer : (A) Stainless steel or glass lined steel

Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber, Kel-F and Teflon (B) Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon

Ball bearings are normally made of __________ steel. (A) High speed (B) High carbon (C) Chrome (D) Silicon

Description : Ball bearings are normally made of __________ steel. (A) High speed (B) High carbon (C) Chrome (D) Silicon

Last Answer : (C) Chrome

_________ is the hardest material out of the following. (A) Boron carbide (B) Tungsten carbide (C) Hardened steel (D) Silicon carbide

Description : _________ is the hardest material out of the following. (A) Boron carbide (B) Tungsten carbide (C) Hardened steel (D) Silicon carbide

Last Answer : (A) Boron carbide

__________ is the most important element, which controls the physical properties of steel. (A) Manganese (B) Silicon (C) Carbon (D) Vanadium

Description : __________ is the most important element, which controls the physical properties of steel. (A) Manganese (B) Silicon (C) Carbon (D) Vanadium

Last Answer : (C) Carbon

Addition of __________ to steel does not help in improving its machinability. (A) Sulphur (B) Silicon (C) Lead (D) Phosphorous

Description : Addition of __________ to steel does not help in improving its machinability. (A) Sulphur (B) Silicon (C) Lead (D) Phosphorous

Last Answer : (B) Silicon

In a good rimming steel (A) Carbon and silicon should be low (B) Silicon should be low but carbon should be high (C) Both silicon & carbon should be high (D) Silicon should be high but carbon should be low

Description : In a good rimming steel (A) Carbon and silicon should be low (B) Silicon should be low but carbon should be high (C) Both silicon & carbon should be high (D) Silicon should be high but carbon should be low

Last Answer : (A) Carbon and silicon should be low

The yield point phenomenon observed in annealed low carbon steel is due to the presence of the following element. (A) Silicon (B) Carbon (C) Phosphorous (D) Chromium

Description : The yield point phenomenon observed in annealed low carbon steel is due to the presence of the following element. (A) Silicon (B) Carbon (C) Phosphorous (D) Chromium

Last Answer : Option B

Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon

Description : Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon

Last Answer : : Option B

Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon

Description : Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon

Last Answer : Option B

Nickel and __________ are the alloying element added in steel to increase its toughness. (A) Molybdenum(B) Chromium(C) Vanadium(D) Silicon

Description : Nickel and __________ are the alloying element added in steel to increase its toughness. (A) Molybdenum (B) Chromium (C) Vanadium (D) Silicon

Last Answer : Option D

__________ property of steel increases by addition of large amount of silicon in it. (A) Mechanical (B) Machining (C) Magnetic (D) Refractory

Description : __________ property of steel increases by addition of large amount of silicon in it. (A) Mechanical (B) Machining (C) Magnetic (D) Refractory

Last Answer : Option C

Addition of __________ to steel does not help in improving its machinability. (A) Sulphur (B) Silicon (C) Lead (D) Phosphorous

Description : Addition of __________ to steel does not help in improving its machinability. (A) Sulphur (B) Silicon (C) Lead (D) Phosphorous

Last Answer : Option B

Percentage of carbon monoxide in blast furnace gas may be around (A) 8 (B) 14 (C) 22 (D) 52

Description : Percentage of carbon monoxide in blast furnace gas may be around (A) 8 (B) 14 (C) 22 (D) 52

Last Answer : (C) 22