Carbon percentage in medium carbon steel is around (A) 0.1 to 0.35 (B) 0.35 to 0.5 (C) 0.8 to 1.4 (D) 1 to 1. 5

Carbon percentage in medium carbon steel is around
(A) 0.1 to 0.35
(B) 0.35 to 0.5
(C) 0.8 to 1.4
(D) 1 to 1. 5
by

1 Answer

Answer :

(B) 0.35 to 0.5
by

Related questions

Low carbon steels are those in which carbon percentage is around (A) 0.1 to 0.35 (B) 0.4 to 0.7 (C) 0.8 to 1.5 (D) 1.5 to 2

Description : Low carbon steels are those in which carbon percentage is around (A) 0.1 to 0.35 (B) 0.4 to 0.7 (C) 0.8 to 1.5 (D) 1.5 to 2

Last Answer : (A) 0.1 to 0.35

The percentage of carbon in mild steel is (A) 0.08 to 0.3 % (B) 0.5 to 1.4 % (D) 2.35 % (D) 0.5 %

Description : The percentage of carbon in mild steel is (A) 0.08 to 0.3 % (B) 0.5 to 1.4 % (D) 2.35 % (D) 0.5 %

Last Answer : (A) 0.08 to 0.3 %

Steel will respond to hardening by heat treatment processes, only when the minimum carbon content in it is __________ percent. (A) 0.02 (B) 0.2 (C) 0.35 (D) 0.5

Description : Steel will respond to hardening by heat treatment processes, only when the minimum carbon content in it is __________ percent. (A) 0.02 (B) 0.2 (C) 0.35 (D) 0.5

Last Answer : (B) 0.2

Minimum percentage of tension steel for a singly reinforced section Fe415 grade is [ A ] 0.2 [ B ] 0.35 [ C ] 2 [ D ] 3.5

Description : Minimum percentage of tension steel for a singly reinforced section Fe415 grade is [ A ] 0.2 [ B ] 0.35 [ C ] 2 [ D ] 3.5

Last Answer : [ A ] 0.2

Minimum percentage of tension steel for a singly reinforced section Fe415 grade is [ A ] 0.2 [ B ] 0.35 [ C ] 2 [ D ] 3.5

Description : Minimum percentage of tension steel for a singly reinforced section Fe415 grade is [ A ] 0.2 [ B ] 0.35 [ C ] 2 [ D ] 3.5

Last Answer : [ A ] 0.2

Carbon content in plain carbon steel is __________ percent. (A) 0.1 to 0.15 (B) 0.35 to 0.45 (C) 0.65 to 0.80 (D) 0.85 to 1.2

Description : Carbon content in plain carbon steel is __________ percent. (A) 0.1 to 0.15 (B) 0.35 to 0.45 (C) 0.65 to 0.80 (D) 0.85 to 1.2

Last Answer : (B) 0.35 to 0.45

When welding medium carbon steel plates over 100mm in thickness would the basic electrodes require any pre treatment before use? a) None if they were in a vacuum pack opened 8 hours prior to use b) None if they were in a sealed vacuum pack prior to use c) Heat to 500 °C for 2 hours if used outside d) Baked at 150°C for 4hours prior to use

Description : When welding medium carbon steel plates over 100mm in thickness would the basic electrodes require any pre treatment before use? a) None if they were in a vacuum pack opened 8 hours prior to use b) None if ... ) Heat to 500 °C for 2 hours if used outside d) Baked at 150°C for 4hours prior to use

Last Answer : b) None if they were in a sealed vacuum pack prior to use

Percentage of carbon monoxide in blast furnace gas may be around (A) 8 (B) 14 (C) 22 (D) 52

Description : Percentage of carbon monoxide in blast furnace gas may be around (A) 8 (B) 14 (C) 22 (D) 52

Last Answer : (C) 22

Medium Carbon steel was carbon content about (A) 0.25 % (B) 0.25 – 0.50 % (C) 0.50 – 1.5 % (D) 2.5 – 4.5 %

Description : Medium Carbon steel was carbon content about (A) 0.25 % (B) 0.25 – 0.50 % (C) 0.50 – 1.5 % (D) 2.5 – 4.5 %

Last Answer : (B) 0.25 – 0.50 %

Hammers and railway rails are normally made of(A) Mild steel(B) Dead mild steel(C) Medium carbon steel(D) High carbon stee

Description : Hammers and railway rails are normally made of (A) Mild steel (B) Dead mild steel (C) Medium carbon steel (D) High carbon stee

Last Answer : (D) High carbon stee

Mild steel is a/an __________ steel. (A) Low carbon (B) Medium carbon (C) High carbon (D) High alloy

Description : Mild steel is a/an __________ steel. (A) Low carbon (B) Medium carbon (C) High carbon (D) High alloy

Last Answer : (A) Low carbon

Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron Answer: Option C

Description : Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron Answer: Option C

Last Answer : (C) Cast iron

Mild steel is a/an __________ steel. (A) Low carbon (B) Medium carbon (C) High carbon (D) High alloy

Description : Mild steel is a/an __________ steel. (A) Low carbon (B) Medium carbon (C) High carbon (D) High alloy

Last Answer : (A) Low carbon

Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron

Description : Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron

Last Answer : Option B

Percentage of carbon in steel ranges from – (1) 0.1 to 1.5 (2) 1.5 to 3.0 (3) 3.0 to 4.0 (4) 4.0 to 6.0

Description : Percentage of carbon in steel ranges from – (1) 0.1 to 1.5 (2) 1.5 to 3.0 (3) 3.0 to 4.0 (4) 4.0 to 6.0

Last Answer : (1) 0.1 to 1.5 Explanation: Steel is an alloy made by combining iron and other elements, the most common of these being carbon. When carbon is used, its content in the steel is ... weight, depending on the grade. Other alloying elements sometimes used are manganese, chromium, vanadium and tungsten.

Percentage of carbon content in mild steel is (A) Less than 0.25 (B) Between 0.25 and 0.7 (C) Between 0.7 and 1.5 (D) Greater than 1.5

Description : Percentage of carbon content in mild steel is (A) Less than 0.25 (B) Between 0.25 and 0.7 (C) Between 0.7 and 1.5 (D) Greater than 1.5

Last Answer : Answer: Option A

The steel mainly contains how much percentage of carbon a) 0.70 to 0.80% b) to 0.3 % c) 0.5 to 0.1 %

Description : The steel mainly contains how much percentage of carbon a) 0.70 to 0.80% b) to 0.3 % c) 0.5 to 0.1 %

Last Answer : 0.70 to 0.80%

Percentage of carbon in steel ranges from (1) 0.1 to 1.5 (2) 1.5 to 3.0 (3) 3.0 to 4.0 (4) 4.0 to 6.0

Description : Percentage of carbon in steel ranges from (1) 0.1 to 1.5 (2) 1.5 to 3.0 (3) 3.0 to 4.0 (4) 4.0 to 6.0

Last Answer : 0.1 to 1.5

The usual values of maximum flux densities for distribution transformers using hot rolled silicon steel are (a) 0.5 to 0.8 Wb/m2 (b) 0.8 to 1.0 Wb/m2 (c) 1.1 to 1.35 Wb/m2 (d) 1.4 to 1.8 Wb/m2

Description : The usual values of maximum flux densities for distribution transformers using hot rolled silicon steel are (a) 0.5 to 0.8 Wb/m2 (b) 0.8 to 1.0 Wb/m2 (c) 1.1 to 1.35 Wb/m2 (d) 1.4 to 1.8 Wb/m2

Last Answer : (c) 1.1 to 1.35 Wb/m2

The percentage of carbon in low carbon steel is A. 0.05% B. 0.15% C. 0.3% D. 0.5%

Description : The percentage of carbon in low carbon steel is A. 0.05% B. 0.15% C. 0.3% D. 0.5%

Last Answer : B. 0.15%

Which one contains the least percentage of carbon?(A) Wrought iron (B) High speed steel (C) Cast iron (D) Pig iron

Description : Which one contains the least percentage of carbon? (A) Wrought iron (B) High speed steel (C) Cast iron (D) Pig iron

Last Answer : (A) Wrought iron

Which of the following has the least carbon percentage? (A) Low carbon steel (B) Mild steel (C) Wrought iron (D) White cast iron

Description : Which of the following has the least carbon percentage? (A) Low carbon steel (B) Mild steel (C) Wrought iron (D) White cast iron

Last Answer : (C) Wrought iron

Carbon percentage is the same in cast iron and (A) Wrought iron(B) Pig iron(C) Mild steel(D) High silicon (14%) iron

Description : Carbon percentage is the same in cast iron and (A) Wrought iron (B) Pig iron (C) Mild steel (D) High silicon (14%) iron

Last Answer : (B) Pig iron

Which of the following contains maximum percentage of carbon? (A) Boiler plate steel (B) Rail steel (C) Saws for cutting steel (D) Railway spring steel

Description : Which of the following contains maximum percentage of carbon? (A) Boiler plate steel (B) Rail steel (C) Saws for cutting steel (D) Railway spring steel

Last Answer : (C) Saws for cutting steel

With increase in the carbon percentage in the steel, its (A) Hardness increases (B) Ductility reduces (C) Tensile strength increases (D) All (A), (B) and (C)

Description : With increase in the carbon percentage in the steel, its (A) Hardness increases (B) Ductility reduces (C) Tensile strength increases (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon

Description : Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon

Last Answer : (D) Plain carbon

Silicon percentage in silicon steel used for electrical equipments is about (A) 1 (B) 4.0 (C) 8 (D) 14

Description : Silicon percentage in silicon steel used for electrical equipments is about (A) 1 (B) 4.0 (C) 8 (D) 14

Last Answer : Option B

Percentage of glycerine present in the spent lye obtained during soap manufacture is about(A) 0.5(B) 5(C) 20(D) 35

Description : Percentage of glycerine present in the spent lye obtained during soap manufacture is about (A) 0.5 (B) 5 (C) 20 (D) 35

Last Answer : (B) 5

Ball bearings are, usually, made from (a) low carbon steel (b) high carbon steel (c) medium carbon steel (d) chrome steel

Description : Ball bearings are, usually, made from (a) low carbon steel (b) high carbon steel (c) medium carbon steel (d) chrome steel

Last Answer : (d) chrome steel

What would be the most likely SAW flux type for welding medium carbon steel which requires impact testing: a) Cellulosic b) Rutile c) Fused d) Agglomerated

Description : What would be the most likely SAW flux type for welding medium carbon steel which requires impact testing: a) Cellulosic b) Rutile c) Fused d) Agglomerated

Last Answer : d) Agglomerated

What force is necessary to hold a weight of 100 kg suspended on a rope wrapped 3 times around a post ( a.0.35 b.0.8 c.1.46 d.2.85 e.107 dynes

Description : What force is necessary to hold a weight of 100 kg suspended on a rope wrapped 3 times around a post ( a.0.35 b.0.8 c.1.46 d.2.85 e.107 dynes

Last Answer : a. 0.35

High carbon steel contains more than __________ percent carbon. (A) 0.5 (B) 2.2 (C) 2.5 (D) 2.8

Description : High carbon steel contains more than __________ percent carbon. (A) 0.5 (B) 2.2 (C) 2.5 (D) 2.8

Last Answer : (A) 0.5

Maximum change in the hardness of martensite occurs in the carbon content range of __________ percent in steel. (A) 0.01 to 0.10 (B) 0.2 to 0.4 (C) 0.5 to 0.7 (D) 0.8 to 1.0

Description : Maximum change in the hardness of martensite occurs in the carbon content range of __________ percent in steel. (A) 0.01 to 0.10 (B) 0.2 to 0.4 (C) 0.5 to 0.7 (D) 0.8 to 1.0

Last Answer : (B) 0.2 to 0.4

. Thermal efficiency of an internal combustion engine is around __________ percent. (A) 8 (B) 35 (C) 65 (D) 80

Description : . Thermal efficiency of an internal combustion engine is around __________ percent. (A) 8 (B) 35 (C) 65 (D) 80

Last Answer : Option B

Thermal efficiency of an internal combustion engine is around __________ percent. (A) 8 (B) 35 (C) 65

Description : Thermal efficiency of an internal combustion engine is around __________ percent. (A) 8 (B) 35 (C) 65

Last Answer : Option B

The minimum carbon content in steel should be __________ percent for it to respond to a hardening treatment. (A) 0.2 (B) 0.4 (C) 0.6 (D) 0.8

Description : The minimum carbon content in steel should be __________ percent for it to respond to a hardening treatment. (A) 0.2 (B) 0.4 (C) 0.6 (D) 0.8

Last Answer : Option A

Steel Of carbon Percentage Amount How much ?

Last Answer : In steel Of carbon Percentage Amount 0 . 15 - 1 . 5 %

Statement -1Wrought iron in more malleable and ducitlle than steel. Statement -2: It contains slightly less percentage of carbon.

Description : Statement -1Wrought iron in more malleable and ducitlle than steel. Statement -2: It contains slightly less percentage of carbon.

Last Answer : Statement -1Wrought iron in more malleable and ducitlle than steel. Statement -2: It contains slightly less percentage of carbon.

Which one of the following contains maximum percentage of carbon? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Description : Which one of the following contains maximum percentage of carbon? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Last Answer : (1) Cast iron Explanation: Cast Iron is a hard, brittle, nonmalleable iron-carbon alloy, cast into shape, containing 2 to 4.5 percent carbon. Steels contain less than 2% and usually less than 1% carbon, ... percent carbon. Wrought iron is an iron alloy with very low carbon (0.04 to 0.08%) content.

Select the correct statement (A) Elastic modulus of high tensile steel is nearly the same as that of mild steel (B) Elastic modulus of high tensile steel is more than that of mild steel (C) Carbon percentage in high carbon steel is less than that in mild steel (D) High tensile steel is cheaper than mild steel

Description : Select the correct statement (A) Elastic modulus of high tensile steel is nearly the same as that of mild steel (B) Elastic modulus of high tensile steel is more than that of mild steel (C) ... high carbon steel is less than that in mild steel (D) High tensile steel is cheaper than mild steel

Last Answer : Answer: Option A

The process of decarbonising the pig iron completely and then adding proper percentage of carbon for manufacturing steel, is called (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Description : The process of decarbonising the pig iron completely and then adding proper percentage of carbon for manufacturing steel, is called (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Last Answer : Answer: Option A

Which one of the following contains maximum percentage of carbon ? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Description : Which one of the following contains maximum percentage of carbon ? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Last Answer : Cast iron

Write composition of steel. Explain its classification based on percentage of carbon.

Description : Write composition of steel. Explain its classification based on percentage of carbon.

Last Answer : Composition: Iron(Fe) - 98.5 to 99.95, Carbon(C) - 0.05 to 1.5 OR Steel consists Iron and Carbon Classification: 1) Mild or low carbon steel - (0.05-0.3%) - The variety of plain carbon ... - The variety of plane carbon steel, which consists of 0.6-1.5% of carbon, is known as high carbon steel.

A spring of mean radius 40 mm contains 8 action coils of steel (N = 80000 N/mm2 ), 4 mm in diameter. The clearance between the coils being 1 mm when unloaded, the minimum compressive load to remove the clearance, is (A) 25 N (B) 30 N (C) 35 N (D) 40 N

Description : A spring of mean radius 40 mm contains 8 action coils of steel (N = 80000 N/mm2 ), 4 mm in  diameter. The clearance between the coils being 1 mm when unloaded, the minimum compressive  load to remove the clearance, is  (A) 25 N  (B) 30 N  (C) 35 N  (D) 40 N 

Last Answer : (C) 35 N 

For determining the compressive strength test on cement is, the percentage amount of water to be added as (Pa = Percentage of water for required consistency) [ A ] 0.25 Pa + 2.5 [ B ] 0.25 Pa + 3.5 [ C ] 0.35 Pa + 2.5 [ D ] 0.35 Pa + 3.5

Description : For determining the compressive strength test on cement is, the percentage amount of water to be added as (Pa = Percentage of water for required consistency) [ A ] 0.25 Pa + 2.5 [ B ] 0.25 Pa + 3.5 [ C ] 0.35 Pa + 2.5 [ D ] 0.35 Pa + 3.5

Last Answer : [ B ] 0.25 Pa + 3.5

Hydrogen percentage (by weight) in crude petroleum may be about (A) 5 (B) 15 (C) 25 (D) 35

Description : Hydrogen percentage (by weight) in crude petroleum may be about (A) 5 (B) 15 (C) 25 (D) 35

Last Answer : (B) 15

Straight silicon steel (containing Si from 0.5 to 5%) because of their low hysteresis loss and high magnetic permeability are used for electrical appliances. Which of the following electrical appliances made of silicon steel contains maximum percentage of silicon (about 4%)? (A) Armature of small motors/generators (B) Generators and small motors (C) Induction motors (D) High frequency transformers

Description : Straight silicon steel (containing Si from 0.5 to 5%) because of their low hysteresis loss and high magnetic permeability are used for electrical appliances. Which of the following electrical ... /generators (B) Generators and small motors (C) Induction motors (D) High frequency transformers

Last Answer : (D) High frequency transformers

The percentage of carbon in cost iron is : (1) 0.01 to 0.25 (2) 0.5 to 1.5 (3) 6 to 8 (4) 3 to 5

Description : The percentage of carbon in cost iron is : (1) 0.01 to 0.25 (2) 0.5 to 1.5 (3) 6 to 8 (4) 3 to 5

Last Answer : 3 to 5

What percentage is equivalent to 0.35?

Description : What percentage is equivalent to 0.35?

Last Answer : The equivalent percentage is 35%