Basicity [%Cao + %MgO + %SiO2) of the slag in Indian blast furnace is in the range of (A) 0.7-1.0 (B) 1.1-1.4 (C) 1.5 - 1.8

Basicity [%Cao + %MgO + %SiO2) of the slag in Indian blast furnace is
in the range of
(A) 0.7-1.0
(B) 1.1-1.4
(C) 1.5 - 1.8
by

1 Answer

Answer :

Option B
by

Related questions

Specific gravity of hot metal (pig iron) is __________ times that of the blast furnace slag. (A) 2 (B) 3 (C) 0.8 (D) 6

Description : Specific gravity of hot metal (pig iron) is __________ times that of the blast furnace slag. (A) 2 (B) 3 (C) 0.8 (D) 6

Last Answer : (B) 3

Volume of blast furnace slag is about __________ times the volume of hot metal (pig iron) of the same weight (A) 1.5 (B) 3 (C) 5

Description : Volume of blast furnace slag is about __________ times the volume of hot metal (pig iron) of the same weight (A) 1.5 (B) 3 (C) 5

Last Answer : Option B

High ash containing coke (A) Produces more slag when used in the blast(B) Has poor strength and abrasion resistance(C) Is desirable in producer gas manufacture(D) None of these furnace

Description : High ash containing coke (A) Produces more slag when used in the blast furnace (B) Has poor strength and abrasion resistance (C) Is desirable in producer gas manufacture (D) None of these

Last Answer : (A) Produces more slag when used in the blast furnace

Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Description : Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Last Answer : (D) None of these

Most of the phosphorous present in the blast furnace burden enters into (A) Hot metal (B) Flue gases (C) Slag (D) Refractory lining

Description : Most of the phosphorous present in the blast furnace burden enters into (A) Hot metal (B) Flue gases (C) Slag (D) Refractory lining

Last Answer : (A) Hot metal

Limestone is added in the blast furnace (during pig iron manufacture) to (A) Form slag by combining with impurities (B) Supply heat by undergoing exothermic reaction with impurities (C) Reduce the coke consumption (D) Reduce slag viscosity

Description : Limestone is added in the blast furnace (during pig iron manufacture) to (A) Form slag by combining with impurities (B) Supply heat by undergoing exothermic reaction with impurities (C) Reduce the coke consumption (D) Reduce slag viscosity

Last Answer : Option A

The slag formed in the blast furnace during the extraction of iron from haematite is

Description : The slag formed in the blast furnace during the extraction of iron from haematite is

Last Answer : The slag formed in the blast furnace during the extraction of iron from haematite is A. `Ca_(3)(PO_(4))_(2)` ... (3)` C. `FeSiO_(3)` D. `MnSiO_(3)`

In the extraction of copper, the slag formed in the blast furnace is

Description : In the extraction of copper, the slag formed in the blast furnace is

Last Answer : In the extraction of copper, the slag formed in the blast furnace is A. `CaSiO_(3)` B. `FeSiO_(3)` C. `FeSiO_(3)` D. `MnSiO_(3)`

What is the viscosity of slag of blast furnace?

Description : What is the viscosity of slag of blast furnace?

Last Answer : What is the answer ?

You are asked to construct a massive dam, the type of cement you will use, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Description : You are asked to construct a massive dam, the type of cement you will use, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Last Answer : Answer: Option C

For the construction of thin R.C.C. structures, the type of cement to be avoided, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Description : For the construction of thin R.C.C. structures, the type of cement to be avoided, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Last Answer : Answer: Option D

For road pavements, the cement generally used, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Description : For road pavements, the cement generally used, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Last Answer : Answer: Option B

Blast furnace slag cement concrete requires ___________time for shuttering and curing. (a) Less (b) More (c) Medium (d) All the above

Description : Blast furnace slag cement concrete requires ___________time for shuttering and curing. (a) Less (b) More (c) Medium (d) All the above

Last Answer : (b) More

For mass concrete work, the type of cement preferable is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement

Description : For mass concrete work, the type of cement preferable is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement

Last Answer : [ C ] Low heat cement

For road pavements, the cement generally used, is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement

Description : For road pavements, the cement generally used, is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement

Last Answer : [ A ] Ordinary Portland cement

In Portland Blast furnace slag cement, the blast furnace slag content shall not exceed [ A ] 50% [ B ] 65% [ C ] 80% [ D ] 90%

Description : In Portland Blast furnace slag cement, the blast furnace slag content shall not exceed [ A ] 50% [ B ] 65% [ C ] 80% [ D ] 90%

Last Answer : [ B ] 65%

State the uses of fly ash and blast furnace slag.

Description : State the uses of fly ash and blast furnace slag.

Last Answer :  I) Fly ash The various uses of fly ash are: 1) Concrete production, as a partial substitute material for Portland cement. 2) For the construction of embankments and other structural fills. 3) For ... and water proofing. 5) It is used as insulation in mineral wool, in rail road ballast etc.

Write two uses of each : (i) Fly ash (ii) Blast furnace slag

Description : Write two uses of each : (i) Fly ash (ii) Blast furnace slag

Last Answer : I) Fly ash The various uses of fly ash are: 1) Concrete production, as a partial substitute material for Portland cement. 2) For the construction of embankments and other structural fills. 3) For ... and water proofing. 5) It is used as insulation in mineral wool, in rail road ballast etc. 

The function of neutral flux used in the pyrometallurgy of metal extraction is to increase the __________ of the slag. (A) Fluidity (B) Basicity (C) Acidity (D) Viscosity

Description : The function of neutral flux used in the pyrometallurgy of metal extraction is to increase the __________ of the slag. (A) Fluidity (B) Basicity (C) Acidity (D) Viscosity

Last Answer : Option A

The function of neutral flux used in the pyrometallurgy of metal extraction is to increase the __________ of the slag. (A) Fluidity (B) Basicity (C) Acidity (D) Viscosity

Description : The function of neutral flux used in the pyrometallurgy of metal extraction is to increase the __________ of the slag. (A) Fluidity (B) Basicity (C) Acidity (D) Viscosity

Last Answer : Option A

The impure iron (pig iron) that is tapped out from blast furnace contains about __________ percent carbon. (A) 0.2 (B) 2 (C) 4 (D) 8

Description : The impure iron (pig iron) that is tapped out from blast furnace contains about __________ percent carbon. (A) 0.2 (B) 2 (C) 4 (D) 8

Last Answer : (C) 4

The cement whose strength is a little lower than the ordinary cement during the first three months but attains afterwards the same strength, is known as (A) Low-heat Portland cement (B) Rapid hardening Portland cement (C) Portland blast slag cement (D) Portland pozzolana cement

Description : The cement whose strength is a little lower than the ordinary cement during the first three months but attains afterwards the same strength, is known as (A) Low-heat Portland cement (B) Rapid hardening Portland cement (C) Portland blast slag cement (D) Portland pozzolana cement

Last Answer : Answer: Option A

Low grade phosphate rock can be used in electrical furnace, because (A) Of the better CaO/SiO2 balance for slag formation (B) CaO content is less (C) It is cheap (D) It produces low cost product

Description : Low grade phosphate rock can be used in electrical furnace, because (A) Of the better CaO/SiO2 balance for slag formation (B) CaO content is less (C) It is cheap (D) It produces low cost product

Last Answer : (A) Of the better CaO/SiO2 balance for slag formation

furnace slag is mainly molten (A) Sand (B) Magnesium silicate (C) Calcium silicate (D) Iron pyrite

Description : furnace slag is mainly molten (A) Sand (B) Magnesium silicate (C) Calcium silicate (D) Iron pyrite

Last Answer : Option C

Percentage of carbon monoxide in blast furnace gas may be around (A) 8 (B) 14 (C) 22 (D) 52

Description : Percentage of carbon monoxide in blast furnace gas may be around (A) 8 (B) 14 (C) 22 (D) 52

Last Answer : (C) 22

Caking index of coal blend used for blast furnace coke making is about (A) 8 (B) 12 (C) 22 (D) 36

Description : Caking index of coal blend used for blast furnace coke making is about (A) 8 (B) 12 (C) 22 (D) 36

Last Answer : (C) 22

Size of blast furnace grade coke is __________ mm. (A) 25-80 (B) 0-15 (C) 15-25 (D) > 100

Description : Size of blast furnace grade coke is __________ mm. (A) 25-80 (B) 0-15 (C) 15-25 (D) > 100

Last Answer : (A) 25-80

Which furnace burns low-ash fusion coal and retains most of the coal ash in the slag?

Description : Which furnace burns low-ash fusion coal and retains most of the coal ash in the slag?

Last Answer : Cyclone furnace.

Which cement should not be used for bridge slabs ro RCC frames a) OPC b) Portland Pozzolana cement * c) Portland furnace slag cement d) Rapid hardening cement

Description : Which cement should not be used for bridge slabs ro RCC frames a) OPC b) Portland Pozzolana cement * c) Portland furnace slag cement d) Rapid hardening cement

Last Answer : b) Portland Pozzolana cement *

Percentage of nitrogen in blast furnace gas may be around (A) 5 (B) 25 (C) 55 (D) 80

Description : Percentage of nitrogen in blast furnace gas may be around (A) 5 (B) 25 (C) 55 (D) 80

Last Answer : (C) 55

Petroleum coke is used mainly in the (A) Discoloration of yellow glycerine (B) Sugar refining (C) Manufacture of carbon electrode (D) Blast furnace for reduction of iron ore

Description : Petroleum coke is used mainly in the (A) Discoloration of yellow glycerine (B) Sugar refining (C) Manufacture of carbon electrode (D) Blast furnace for reduction of iron ore

Last Answer : (C) Manufacture of carbon electrode

The most efficient equipment for the removal of sub-micronic dust particles from blast furnace gas is the (A) Venturi atomiser (B) Gravity settling chamber (C) Electro-static precipitator (D) Cyclone separator

Description : The most efficient equipment for the removal of sub-micronic dust particles from blast furnace gas is the (A) Venturi atomiser (B) Gravity settling chamber (C) Electro-static precipitator (D) Cyclone separator

Last Answer : (C) Electro-static precipitator

Raw materials are charged in the iron blast furnace using (A) Bucket elevator (B) Skip hoist (C) Screw conveyor (D) None of these

Description : Raw materials are charged in the iron blast furnace using (A) Bucket elevator (B) Skip hoist (C) Screw conveyor (D) None of these

Last Answer : (B) Skip hoist

Out of the following fuels used in a furnace exhausting flue gas at a temperature of 600°C, the percentage stack loss will be maximum in case ofcomplete combustion of(A) Furnace oil with air(B) Furnace oil with oxygen(C) Blast furnace gas with air(D) Blast furnace gas with oxygen

Description : Out of the following fuels used in a furnace exhausting flue gas at a temperature of 600°C, the percentage stack loss will be maximum in case ofcomplete combustion of (A) Furnace oil with air (B) Furnace oil with oxygen (C) Blast furnace gas with air (D) Blast furnace gas with oxygen

Last Answer : (C) Blast furnace gas with air

Coke ovens in steel plant are heated by (A) Electricity (B) Blast furnace gas/mixed gas (C) Coke oven gas (D) Both (B) and (C)

Description : Coke ovens in steel plant are heated by (A) Electricity (B) Blast furnace gas/mixed gas (C) Coke oven gas (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

__________ atmosphere is maintained inside an iron blast furnace. (A) Oxidising (B) Reducing (C) Inert (D) Decarburising

Description : __________ atmosphere is maintained inside an iron blast furnace. (A) Oxidising (B) Reducing (C) Inert (D) Decarburising

Last Answer : (B) Reducing

Thermal efficiency of blast furnace stoves used for heating blast (air) may be about __________ percent. (A) 20 (B) 40 (C) 60 (D) 80

Description : Thermal efficiency of blast furnace stoves used for heating blast (air) may be about __________ percent. (A) 20 (B) 40 (C) 60 (D) 80

Last Answer : (D) 80

Which one is not an induced draught furnace? (A) Blast furnace stove (B) Sintering furnace (C) High pressure boiler (D) None of these

Description : Which one is not an induced draught furnace? (A) Blast furnace stove (B) Sintering furnace (C) High pressure boiler (D) None of these

Last Answer : (A) Blast furnace stove

Heat transfer takes place through a liquid medium surrounding the submerged material under heating, in case of a/an (A) Blast furnace (B) Steam boiler (C) Salt bath furnace (D) Annealing furnace

Description : Heat transfer takes place through a liquid medium surrounding the submerged material under heating, in case of a/an (A) Blast furnace (B) Steam boiler (C) Salt bath furnace (D) Annealing furnace

Last Answer : (C) Salt bath furnace

Reducing atmosphere is maintained in a (A) Calcination kiln (B) Blast furnace (C) Soaking pit (D) L.D. converter

Description : Reducing atmosphere is maintained in a (A) Calcination kiln (B) Blast furnace (C) Soaking pit (D) L.D. converter

Last Answer : (B) Blast furnace

Blast furnace stoves are meant for heating (A) Air (B) Blast furnace gas (C) Steam (D) None of these

Description : Blast furnace stoves are meant for heating (A) Air (B) Blast furnace gas (C) Steam (D) None of these

Last Answer : (A) Air

Operation of blast furnace stove is based on the principles of a __________ furnace. (A) Regenerative (B) Recuperative (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Operation of blast furnace stove is based on the principles of a __________ furnace. (A) Regenerative (B) Recuperative (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (A) Regenerative

Regenerators are used for waste heat recovery in (A) By-product coke ovens (B) Beehive coke oven (C) Blast furnace stoves (D) Soaking pits

Description : Regenerators are used for waste heat recovery in (A) By-product coke ovens (B) Beehive coke oven (C) Blast furnace stoves (D) Soaking pits

Last Answer : (A) By-product coke ovens

Fuel used in B.F. stove is (A) Pulverised coal (B) Furnace oil (C) Blast furnace gas/mixed gas (D) Coke oven gas

Description : Fuel used in B.F. stove is (A) Pulverised coal (B) Furnace oil (C) Blast furnace gas/mixed gas (D) Coke oven gas

Last Answer : (C) Blast furnace gas/mixed gas

Which furnace employs an I.D. fan for the removal of flue gases from the furnace? (A) Coke oven(B) Blast furnace stoves(C) Beehive coke oven(D) High pressure boiler

Description : Which furnace employs an I.D. fan for the removal of flue gases from the furnace? (A) Coke oven (B) Blast furnace stoves (C) Beehive coke oven (D) High pressure boiler

Last Answer : (D) High pressure boiler

An example of shaft furnace is the (A) L.D. converter (B) Glass melting tank (C) Blast furnace (D) Soaking pit

Description : An example of shaft furnace is the (A) L.D. converter (B) Glass melting tank (C) Blast furnace (D) Soaking pit

Last Answer : (C) Blast furnace

. An example of a periodic furnace is the (A) Blast furnace stoves (B) Blast furnace (C) Coke oven heating chamber (D) Rotary kilns

Description : . An example of a periodic furnace is the (A) Blast furnace stoves (B) Blast furnace (C) Coke oven heating chamber (D) Rotary kilns

Last Answer : (A) Blast furnace stoves

Which of the following is not a by-product fuel? (A) Producer gas (B) Blast furnace gas (C) Coke oven gas (D) Refinery gas

Description : Which of the following is not a by-product fuel? (A) Producer gas (B) Blast furnace gas (C) Coke oven gas (D) Refinery gas

Last Answer : (A) Producer gas

Which of the following has the least calorific value (kcal/Nm3 )? (A) Blast furnace gas (B) Coke oven gas (C) Sewage gas (D) Natural gas

Description : Which of the following has the least calorific value (kcal/Nm3 )? (A) Blast furnace gas (B) Coke oven gas (C) Sewage gas (D) Natural gas

Last Answer : (A) Blast furnace gas