Which furnace burns low-ash fusion coal and retains most of the coal ash in the slag?

Which furnace burns low-ash fusion coal and retains most of the coal ash in the slag?
by

1 Answer

Answer :

Cyclone furnace.
by

Related questions

The advantages of firing pulverised coal in the furnace lies in the fact that, it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel consumption (D) All (A), (B) and (C)

Description : The advantages of firing pulverised coal in the furnace lies in the fact that, it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel consumption (D) All (A), (B) and (C)

Last Answer : (C) Accelerates the burning rate and economises on fuel consumption

The advantage of firing pulverised coal in the furnace lies in the fact, that it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal(C) Accelerates the burning rate and economises on fuel combustion(D) All (A), (B) and (C)

Description : The advantage of firing pulverised coal in the furnace lies in the fact, that it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel combustion (D) All (A), (B) and (C)

Last Answer : (C) Accelerates the burning rate and economises on fuel combustion

In producer gas making furnace, steam is added along with air to mainly control the (A) Fusion of coal ash & clinker formation (B) C. V. of producer gas (C) Temperature of producer gas (D) Tar content in producer gas

Description : In producer gas making furnace, steam is added along with air to mainly control the (A) Fusion of coal ash & clinker formation (B) C. V. of producer gas (C) Temperature of producer gas (D) Tar content in producer gas

Last Answer : (A) Fusion of coal ash & clinker formation

High ash containing coke (A) Produces more slag when used in the blast(B) Has poor strength and abrasion resistance(C) Is desirable in producer gas manufacture(D) None of these furnace

Description : High ash containing coke (A) Produces more slag when used in the blast furnace (B) Has poor strength and abrasion resistance (C) Is desirable in producer gas manufacture (D) None of these

Last Answer : (A) Produces more slag when used in the blast furnace

State the uses of fly ash and blast furnace slag.

Description : State the uses of fly ash and blast furnace slag.

Last Answer :  I) Fly ash The various uses of fly ash are: 1) Concrete production, as a partial substitute material for Portland cement. 2) For the construction of embankments and other structural fills. 3) For ... and water proofing. 5) It is used as insulation in mineral wool, in rail road ballast etc.

Write two uses of each : (i) Fly ash (ii) Blast furnace slag

Description : Write two uses of each : (i) Fly ash (ii) Blast furnace slag

Last Answer : I) Fly ash The various uses of fly ash are: 1) Concrete production, as a partial substitute material for Portland cement. 2) For the construction of embankments and other structural fills. 3) For ... and water proofing. 5) It is used as insulation in mineral wool, in rail road ballast etc. 

The reason for excessive clinker formation in gas producers is the (A) Use of coal/coke containing a high % of fines and ash (B) Use of fuel having too low an ash fusion temperature (C) Development of hot spots in the fuel bed and an abnormally high rate of gasification (D) All (A), (B) and (C)

Description : The reason for excessive clinker formation in gas producers is the (A) Use of coal/coke containing a high % of fines and ash (B) Use of fuel having too low an ash fusion temperature (C) Development of hot spots in the fuel bed and an abnormally high rate of gasification (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A coal containing high amount of volatile matter will have (A) Low ignition temperature (B) Very little ash content (C) High fusion point of its ash (D) Low adiabatic flame temperature

Description : A coal containing high amount of volatile matter will have (A) Low ignition temperature (B) Very little ash content (C) High fusion point of its ash (D) Low adiabatic flame temperature

Last Answer : (A) Low ignition temperature

A good quality coal should have (A) Low fusion point of ash (B) High ash content (C) High sulphur (D) None of these

Description : A good quality coal should have (A) Low fusion point of ash (B) High ash content (C) High sulphur (D) None of these

Last Answer : (D) None of these

During combustion of coal on grate, clinker formation is increased by the (A) Use of thick fire bed (B) Low fusion point of ash (< 1100° C) (C) Use of preheated primary air (D) All (A), (B) & (C)

Description : During combustion of coal on grate, clinker formation is increased by the (A) Use of thick fire bed (B) Low fusion point of ash (< 1100° C) (C) Use of preheated primary air (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Which of the following is unsuitable fuel for producer gas manufacture? (A) Coke (B) Anthracite (C) Coal having low fusion point of its ash (D) Coal having high fusion point of its ash

Description : Which of the following is unsuitable fuel for producer gas manufacture? (A) Coke (B) Anthracite (C) Coal having low fusion point of its ash (D) Coal having high fusion point of its ash

Last Answer : (C) Coal having low fusion point of its ash

A good quality coal should have (A) Low fusion point of ash (B) High ash content (C) High sulphur content (D) None of these

Description : A good quality coal should have (A) Low fusion point of ash (B) High ash content (C) High sulphur content (D) None of these

Last Answer : (D) None of these

Fusion point of coal ash generally varies from 1000 to 1700° C. Ash having fusion point less than __________ °C is liable to form clinker. (A) 1100 (B) 1250 (C) 1350 (D) 1400

Description : Fusion point of coal ash generally varies from 1000 to 1700° C. Ash having fusion point less than __________ °C is liable to form clinker. (A) 1100 (B) 1250 (C) 1350 (D) 1400

Last Answer : (A) 1100

A coal having higher volatile matter content will necessarily have lower (A) Ash fusion temperature (B) Calorific value (C) Ignition temperature (D) Caking index

Description : A coal having higher volatile matter content will necessarily have lower (A) Ash fusion temperature (B) Calorific value (C) Ignition temperature (D) Caking index

Last Answer : (C) Ignition temperature

The weathering index of a coal (A) Gives an idea of the fusion temperature of ash (B) Is related to its calorific value (C) Is a measure of its size stability, when stored & exposed to weather (D) Is a measure of its caking tendency

Description : The weathering index of a coal (A) Gives an idea of the fusion temperature of ash (B) Is related to its calorific value (C) Is a measure of its size stability, when stored & exposed to weather (D) Is a measure of its caking tendency

Last Answer : (C) Is a measure of its size stability, when stored & exposed to weather

Pulverised coal used in boiler firing need not have (A) Less moisture content (B) High fusion point of its ash (C) High bulk density (D) Lower ash conten

Description : Pulverised coal used in boiler firing need not have (A) Less moisture content (B) High fusion point of its ash (C) High bulk density (D) Lower ash conten

Last Answer : (B) High fusion point of its ash

Washing of coal does not reduce its (A) S & P content (B) Heating value (C) Fusion point of ash (D) None of these

Description : Washing of coal does not reduce its (A) S & P content (B) Heating value (C) Fusion point of ash (D) None of these

Last Answer : (D) None of these

Washing of coal (A) Reduces its ash & sulphur content (B) Improves its coking properties (C) Increase the fusion point of its ash by removing chlorine compounds (D) All (A), (B) and (C)

Description : Washing of coal (A) Reduces its ash & sulphur content (B) Improves its coking properties (C) Increase the fusion point of its ash by removing chlorine compounds (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Fusion point of coal ash increases with increase in its __________ content. (A) Iron sulphate (B) Iron silicate (C) Lime and magnesia (D) All (A), (B) and (C)

Description : Fusion point of coal ash increases with increase in its __________ content. (A) Iron sulphate (B) Iron silicate (C) Lime and magnesia (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Low grade phosphate rock can be used in electrical furnace, because (A) Of the better CaO/SiO2 balance for slag formation (B) CaO content is less (C) It is cheap (D) It produces low cost product

Description : Low grade phosphate rock can be used in electrical furnace, because (A) Of the better CaO/SiO2 balance for slag formation (B) CaO content is less (C) It is cheap (D) It produces low cost product

Last Answer : (A) Of the better CaO/SiO2 balance for slag formation

You are asked to construct a massive dam, the type of cement you will use, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Description : You are asked to construct a massive dam, the type of cement you will use, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Last Answer : Answer: Option C

For the construction of thin R.C.C. structures, the type of cement to be avoided, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Description : For the construction of thin R.C.C. structures, the type of cement to be avoided, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Last Answer : Answer: Option D

For road pavements, the cement generally used, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Description : For road pavements, the cement generally used, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Last Answer : Answer: Option B

For mass concrete work, the type of cement preferable is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement

Description : For mass concrete work, the type of cement preferable is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement

Last Answer : [ C ] Low heat cement

For road pavements, the cement generally used, is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement

Description : For road pavements, the cement generally used, is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement

Last Answer : [ A ] Ordinary Portland cement

A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength

Description : A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength

Last Answer : (A) Sulphur & phosphorous content

Coals used for the generation of producer gas should have (A) High caking index (B) Low fusion point of ash (C) High volatile matter content (D) Very low ash content (8-10%)

Description : Coals used for the generation of producer gas should have (A) High caking index (B) Low fusion point of ash (C) High volatile matter content (D) Very low ash content (8-10%)

Last Answer : (C) High volatile matter content

A good metallurgical coke (A) Should have high porosity (B) Should be brittle (C) Must contain moderate quantities of ash, moisture, sulphur and volatile matters (D) Should have low fusion point of its ash

Description : A good metallurgical coke (A) Should have high porosity (B) Should be brittle (C) Must contain moderate quantities of ash, moisture, sulphur and volatile matters (D) Should have low fusion point of its ash

Last Answer : (A) Should have high porosity

Pulverized coal is (A) Coal free from ash (B) Non-smoking coal (C) Coal which bums for long time (D) Coal broken into fine particles.

Description : Pulverized coal is (A) Coal free from ash (B) Non-smoking coal (C) Coal which bums for long time (D) Coal broken into fine particles.

Last Answer : Coal broken into fine particles

Find false statement about effect of sulphur in fuel? (A) It has heating value (B) It helps in electrostatic precipitation of ash in flue gases (C) It leads to corrosion of air heaters, ducting, etc. if flue gas exit temperature is low (D) It erodes furnace walls

Description : Find false statement about effect of sulphur in fuel? (A) It has heating value (B) It helps in electrostatic precipitation of ash in flue gases (C) It leads to corrosion of air heaters, ducting, etc. if flue gas exit temperature is low (D) It erodes furnace walls

Last Answer : (D) It erodes furnace walls

The slag formed in the blast furnace during the extraction of iron from haematite is

Description : The slag formed in the blast furnace during the extraction of iron from haematite is

Last Answer : The slag formed in the blast furnace during the extraction of iron from haematite is A. `Ca_(3)(PO_(4))_(2)` ... (3)` C. `FeSiO_(3)` D. `MnSiO_(3)`

In the extraction of copper, the slag formed in the blast furnace is

Description : In the extraction of copper, the slag formed in the blast furnace is

Last Answer : In the extraction of copper, the slag formed in the blast furnace is A. `CaSiO_(3)` B. `FeSiO_(3)` C. `FeSiO_(3)` D. `MnSiO_(3)`

What is the viscosity of slag of blast furnace?

Description : What is the viscosity of slag of blast furnace?

Last Answer : What is the answer ?

Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Description : Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Last Answer : (D) None of these

Specific gravity of hot metal (pig iron) is __________ times that of the blast furnace slag. (A) 2 (B) 3 (C) 0.8 (D) 6

Description : Specific gravity of hot metal (pig iron) is __________ times that of the blast furnace slag. (A) 2 (B) 3 (C) 0.8 (D) 6

Last Answer : (B) 3

Most of the phosphorous present in the blast furnace burden enters into (A) Hot metal (B) Flue gases (C) Slag (D) Refractory lining

Description : Most of the phosphorous present in the blast furnace burden enters into (A) Hot metal (B) Flue gases (C) Slag (D) Refractory lining

Last Answer : (A) Hot metal

furnace slag is mainly molten (A) Sand (B) Magnesium silicate (C) Calcium silicate (D) Iron pyrite

Description : furnace slag is mainly molten (A) Sand (B) Magnesium silicate (C) Calcium silicate (D) Iron pyrite

Last Answer : Option C

Limestone is added in the blast furnace (during pig iron manufacture) to (A) Form slag by combining with impurities (B) Supply heat by undergoing exothermic reaction with impurities (C) Reduce the coke consumption (D) Reduce slag viscosity

Description : Limestone is added in the blast furnace (during pig iron manufacture) to (A) Form slag by combining with impurities (B) Supply heat by undergoing exothermic reaction with impurities (C) Reduce the coke consumption (D) Reduce slag viscosity

Last Answer : Option A

Volume of blast furnace slag is about __________ times the volume of hot metal (pig iron) of the same weight (A) 1.5 (B) 3 (C) 5

Description : Volume of blast furnace slag is about __________ times the volume of hot metal (pig iron) of the same weight (A) 1.5 (B) 3 (C) 5

Last Answer : Option B

Basicity [%Cao + %MgO + %SiO2) of the slag in Indian blast furnace is in the range of (A) 0.7-1.0 (B) 1.1-1.4 (C) 1.5 - 1.8

Description : Basicity [%Cao + %MgO + %SiO2) of the slag in Indian blast furnace is in the range of (A) 0.7-1.0 (B) 1.1-1.4 (C) 1.5 - 1.8

Last Answer : Option B

Blast furnace slag cement concrete requires ___________time for shuttering and curing. (a) Less (b) More (c) Medium (d) All the above

Description : Blast furnace slag cement concrete requires ___________time for shuttering and curing. (a) Less (b) More (c) Medium (d) All the above

Last Answer : (b) More

In Portland Blast furnace slag cement, the blast furnace slag content shall not exceed [ A ] 50% [ B ] 65% [ C ] 80% [ D ] 90%

Description : In Portland Blast furnace slag cement, the blast furnace slag content shall not exceed [ A ] 50% [ B ] 65% [ C ] 80% [ D ] 90%

Last Answer : [ B ] 65%

Which cement should not be used for bridge slabs ro RCC frames a) OPC b) Portland Pozzolana cement * c) Portland furnace slag cement d) Rapid hardening cement

Description : Which cement should not be used for bridge slabs ro RCC frames a) OPC b) Portland Pozzolana cement * c) Portland furnace slag cement d) Rapid hardening cement

Last Answer : b) Portland Pozzolana cement *

Is Magnesium ribbon burns leaving white ash?

Description : Is Magnesium ribbon burns leaving white ash?

Last Answer : Need answer

Steam at 100°C causes more severe burns than water at 100° C because – (1) steam has no specific heat capacity (2) steam has latent heat of vaporization (3) water has no specific heat capacity (4) water has latent heat of fusion

Description : Steam at 100°C causes more severe burns than water at 100° C because – (1) steam has no specific heat capacity (2) steam has latent heat of vaporization (3) water has no specific heat capacity (4) water has latent heat of fusion

Last Answer : (2) steam has latent heat of vaporization Explanation: It is because steam releases its latent heat as it condenses, which is substantial. The heat of vaporization of steam is over 2000 J per gram. And when it releases that it's then 100 degree water, the same as boiling water.

Steam at 1000C causes more severe burns than water at 100° C because (1) steam has no specific heat capacity (2) steam has latent heat of vaporisation (3) water has no specific heat capacity (4) water has latent heat of fusion

Description : Steam at 1000C causes more severe burns than water at 100° C because (1) steam has no specific heat capacity (2) steam has latent heat of vaporisation (3) water has no specific heat capacity (4) water has latent heat of fusion

Last Answer :  steam has latent heat of vaporisation

Which of the following statement (s) regarding India's coal reserves is/are true ? 1. Over 90 percent of total reserves are located in the valleys of Son, Damodar, Mahanadi and Godavari 2. Indian coal reserves are characterised by low ash content and high calorific value 3. India has limited prime coking reserves (a) I only (b) I and III (c) II and III (d) I, II and III

Description : Which of the following statement (s) regarding India's coal reserves is/are true ? 1. Over 90 percent of total reserves are located in the valleys of Son, Damodar, Mahanadi and Godavari 2. Indian coal reserves are characterised ... reserves (a) I only (b) I and III (c) II and III (d) I, II and III

Last Answer : Ans: (c)

For long flame and easy ignition, the coal used should have (A) High volatile matter (B) Low ash (C) High calorific value (D) High ash

Description : For long flame and easy ignition, the coal used should have (A) High volatile matter (B) Low ash (C) High calorific value (D) High ash

Last Answer : (A) High volatile matter

Fat' coal means a coal having (A) Low calorific value (B) High volatile matter (C) Low ash content

Description : Fat' coal means a coal having (A) Low calorific value (B) High volatile matter (C) Low ash content

Last Answer : (B) High volatile matter