Brazing is the joining of metals (A) Without melting the base metal (B) With a non-ferrous filler (C) Both (A) & (B) (D) Neither (A) nor (B)

Brazing is the joining of metals
(A) Without melting the base metal
(B) With a non-ferrous filler
(C) Both (A) & (B)
(D) Neither (A) nor (B)
by

1 Answer

Answer :

Option C
by

Related questions

Brazing filler metal used for joining steel plates (A) Melts below the melting points of base metals (B) Melts below 300°C (C) Is copper phosphorous alloy

Description : Brazing filler metal used for joining steel plates (A) Melts below the melting points of base metals (B) Melts below 300°C (C) Is copper phosphorous alloy

Last Answer : (A) Melts below the melting points of base metals

Compare Brazing and Soldering on the basis of : (i) Temperature Used. (ii) Filler Material. (iii) Joint Strength (iv) Applications.

Description : Compare Brazing and Soldering on the basis of : (i) Temperature Used. (ii) Filler Material. (iii) Joint Strength (iv) Applications.

Last Answer : Comparison of Brazing and Soldering:

Galvanising (i.e., zinc coating) of steel sheets is done to (A) Prevent its rusting by contact with corrosive atmosphere (B) Protect the base metal by cathodic protection (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Galvanising (i.e., zinc coating) of steel sheets is done to (A) Prevent its rusting by contact with corrosive atmosphere (B) Protect the base metal by cathodic protection (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

When brazing the lowest effective brazing temperatures possible should be used to minimize the effects of heat on the base metal?

Description : When brazing the lowest effective brazing temperatures possible should be used to minimize the effects of heat on the base metal?

Last Answer : Yes, that is proper technique.

The damage/deterioration of metals by the __________ action of fluids is called 'erosion'. (A) Abrasive (B) Corrosive (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The damage/deterioration of metals by the __________ action of fluids is called 'erosion'. (A) Abrasive (B) Corrosive (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Abrasive

Plutonium (A) Is recovered from spent fuel from thermal nuclear reactor (B) Has much lower melting point (640°C ) compared to thorium (1690°C) (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Plutonium (A) Is recovered from spent fuel from thermal nuclear reactor (B) Has much lower melting point (640°C ) compared to thorium (1690°C) (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B

__________ increases with increase in pressure. (A) The melting point of wax (B) The boiling point of a liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : __________ increases with increase in pressure. (A) The melting point of wax (B) The boiling point of a liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Reaction of calcium carbide with water produces a gas, which is used (A) As an illuminant (B) For metal cutting/welding(C) Both (A) & (B)(D) Neither (A) nor (B)

Description : Reaction of calcium carbide with water produces a gas, which is used (A) As an illuminant (B) For metal cutting/welding (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Diffusion co-efficient of a metal in a solid solution depends upon its (A) Composition (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Diffusion co-efficient of a metal in a solid solution depends upon its (A) Composition (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Generally __________ are subjected to galvanising (i.e., zinc coating). (A) Non-ferrous metals (B) Non-metals (C) Low carbon steels (D) Stainless steel

Description : Generally __________ are subjected to galvanising (i.e., zinc coating). (A) Non-ferrous metals (B) Non-metals (C) Low carbon steels (D) Stainless steel

Last Answer : (C) Low carbon steels

Galvanising is generally done on (A) Non-ferrous metals (B) Low carbon steel (C) Stainless steel (D) Cast iron

Description : Galvanising is generally done on (A) Non-ferrous metals (B) Low carbon steel (C) Stainless steel (D) Cast iron

Last Answer : (B) Low carbon steel

Non-ferrous metals and hard steels do not exhibit a definite yield point, when pulled in the testing machine and hence for these cases, a better measure of their elastic properties is defined by the __________ stress. (A) Ultimate (B) Yield point (C) Proof (D) None of these

Description : Non-ferrous metals and hard steels do not exhibit a definite yield point, when pulled in the testing machine and hence for these cases, a better measure of their elastic properties is defined by the __________ stress. (A) Ultimate (B) Yield point (C) Proof (D) None of these

Last Answer : (C) Proof

The largest consumption of zinc for alloys is in the making of (A) Bearing metal (B) Brasses (C) Brazing solder

Description : The largest consumption of zinc for alloys is in the making of (A) Bearing metal (B) Brasses (C) Brazing solder

Last Answer : (B) Brasses

Very __________ coals are completely devoid of cokability i.e., it is non-coking. (A) Young (B) Mature (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Description : Very __________ coals are completely devoid of cokability i.e., it is non-coking. (A) Young (B) Mature (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Last Answer : (C) Both 'a' & 'b'

Signal normally used to study non-ideal flow by stimulus response technique is __________ input. (A) Pulse (B) Step (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Signal normally used to study non-ideal flow by stimulus response technique is __________ input. (A) Pulse (B) Step (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The single parameter model proposed for describing non-ideal flow is the __________ model. (A) Tank in series (B) Dispersion (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The single parameter model proposed for describing non-ideal flow is the __________ model. (A) Tank in series (B) Dispersion (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Trouton's ratio of __________ liquids is calculated using Kistyakowsky equation. (A) Polar (B) Non-polar (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Trouton's ratio of __________ liquids is calculated using Kistyakowsky equation. (A) Polar (B) Non-polar (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Non-polar

Consider the following statements: 1. when an electric bulb is switched on, the resistance of its tungsten filament increases. 2. the resistance of pure metals increases on heating. Which of the above statements is/are correct? (a) Both 1 and 2 (b) only 1 (c) only 2 (d) Neither 1 nor 2

Description : Consider the following statements: 1. when an electric bulb is switched on, the resistance of its tungsten filament increases. 2. the resistance of pure metals increases on heating. Which of the above statements is/are correct? (a) Both 1 and 2 (b) only 1 (c) only 2 (d) Neither 1 nor 2

Last Answer : Ans:(a)

India is particularly poor in reserves of (a) coal (b) iron ore (c) non-ferrous metals (d) limestone

Description : India is particularly poor in reserves of (a) coal (b) iron ore (c) non-ferrous metals (d) limestone

Last Answer : Ans: (c)

In which of the following welding methods, the molten metal is poured for joining the metals ?

Description : In which of the following welding methods, the molten metal is poured for joining the metals ?   (a) Gas welding (b) Thermit welding (c) TIG welding (d) Arc welding 

Last Answer : In which of the following welding methods, the molten metal is poured for joining the metals ?   (a) Gas welding (b) Thermit welding (c) TIG welding (d) Arc welding 

Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than chromate coating (C) The base metal to be electroplated is normally made the cathode of the electrolytic cell and coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Description : Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than ... coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Last Answer : (D) Calorising is the process of coating steel with chromium

Which of the manufacturing processes is/are required to make a typical stainless steel spoon out of sheet metal? A. Casting B. Forming C. Brazing D. Blow moulding

Description : Which of the manufacturing processes is/are required to make a typical stainless steel spoon out of sheet metal? A. Casting B. Forming C. Brazing D. Blow moulding

Last Answer : Forming

Which of the following is not a non-ferrous alloy? (A) Meehanite (B) Magnalium (C) Gun metal (D) Muntz metal

Description : Which of the following is not a non-ferrous alloy? (A) Meehanite (B) Magnalium (C) Gun metal (D) Muntz metal

Last Answer : (A) Meehanite

Oxide layer formed on the non-ferrous metal surface after its annealing is (A) Removed by acid pickling (B) Hammered into the surface (C) Removed with coarse emery cloth

Description : Oxide layer formed on the non-ferrous metal surface after its annealing is (A) Removed by acid pickling (B) Hammered into the surface (C) Removed with coarse emery cloth

Last Answer : Option A

Imprisonment for non-payment of fine shall terminate (a) On payment of fine (b) On expiry of the term of imprisonment for non-payment (c) both (a) & (b) (d) neither (a) nor (b).

Description : Imprisonment for non-payment of fine shall terminate (a) On payment of fine (b) On expiry of the term of imprisonment for non-payment (c) both (a) & (b) (d) neither (a) nor (b).

Last Answer : (c) both (a) & (b)

Which of the following statement is correct: (a) Similar charges attract each other (b) Similar charges attract and repel each other (c) Similar charges repel each other (d) Similar charges neither attract nor repel 9. Metals are good conductors of electricity because they have:

Description : Which of the following statement is correct: (a) Similar charges attract each other (b) Similar charges attract and repel each other (c) Similar charges repel each other (d) Similar charges neither attract nor repel 9. Metals are good conductors of electricity because they have:

Last Answer : (c) Similar charges repel each other

Muntz metal is a/an alloys of (A) Magnesium & tin (B) Ferrous material (C) Lead & tin (D) Copper & zinc

Description : Muntz metal is a/an alloys of (A) Magnesium & tin (B) Ferrous material (C) Lead & tin (D) Copper & zinc

Last Answer : (D) Copper & zinc

Nickel as a material of construction (A) Is used as an alloying element for both ferrous & non-ferrous alloys (B) Is paramagnetic below 415° C (its Curie temperature) (C) Diamagnetic (D) Has a body centred cubic (bcc) crystal lattice structure

Description : Nickel as a material of construction (A) Is used as an alloying element for both ferrous & non-ferrous alloys (B) Is paramagnetic below 415° C (its Curie temperature) (C) Diamagnetic (D) Has a body centred cubic (bcc) crystal lattice structure

Last Answer : (A) Is used as an alloying element for both ferrous & non-ferrous alloys

Which of the following statement(s) with regard to an abstract class in JAVA is/are TRUE? I. An abstract class is one that is not used to create objects. II. An abstract class is designed only to act as a base class to be inherited by other classes. (1) Only l (2) Only II (3) Neither I nor II (4) Both l and II

Description : Which of the following statement(s) with regard to an abstract class in JAVA is/are TRUE? I. An abstract class is one that is not used to create objects. II. An abstract class is designed only to act as a base class ... by other classes. (1) Only l (2) Only II (3) Neither I nor II (4) Both l and II

Last Answer : Both l and II

The current in a metal at any frequency is due to a) Conduction current b) Displacement current c) Both conduction and displacement current d) Neither conduction nor displacement current

Description : The current in a metal at any frequency is due to a) Conduction current b) Displacement current c) Both conduction and displacement current d) Neither conduction nor displacement current

Last Answer : a) Conduction current

Steam distillation is used for separation of high boiling (A) Substances from non-volatile impurities (B) Volatile impurity from still higher boiling substances (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Steam distillation is used for separation of high boiling (A) Substances from non-volatile impurities (B) Volatile impurity from still higher boiling substances (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Prime coking coal is always blended with medium or non- coking coal before carbonisation (A) To check against its excessive swelling during heating, which may exert high pressure and damage coke oven walls (B) Because, it alone produces unreactive coke (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Prime coking coal is always blended with medium or non- coking coal before carbonisation (A) To check against its excessive swelling during heating, which may exert high pressure and damage coke oven walls (B) Because, it alone produces unreactive coke (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Fanning friction factor equation applies to the __________ fluid flow. (A) Non-isothermal condition of (B) Compressible (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Fanning friction factor equation applies to the __________ fluid flow. (A) Non-isothermal condition of (B) Compressible (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Applicability of Bernoulli's equation is limited to a/an __________ fluid, that does not exchange shaft work with the surroundings. (A) Incompressible (B) Non-viscous (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Applicability of Bernoulli's equation is limited to a/an __________ fluid, that does not exchange shaft work with the surroundings. (A) Incompressible (B) Non-viscous (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Work done may be calculated by the expression ∫ p dA for __________ processes. (A) Non-flow reversible (B) Adiabatic (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Work done may be calculated by the expression ∫ p dA for __________ processes. (A) Non-flow reversible (B) Adiabatic (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

How might you separate ferrous metal containers from non-ferrous containers at a recycling plant.?

Description : How might you separate ferrous metal containers from non-ferrous containers at a recycling plant.?

Last Answer : This is one of the easiest separations. The ferrous containerswill be attracted to a magnet and the rest won't.

How might you separate ferrous metal containers from non-ferrous containers at a recycling plant.?

Description : How might you separate ferrous metal containers from non-ferrous containers at a recycling plant.?

Last Answer : This is one of the easiest separations. The ferrous containerswill be attracted to a magnet and the rest won't.

Which is a non-ferrous metal?

Description : Which is a non-ferrous metal?

Last Answer : Aluminium

. Lap joints are preferred over butt joints in soldering/brazing, because these joints are (A) Weaker in tension but stronger in shear (B) Weaker in shear but stronger in tension (C) Stronger in both shear and tension (D) The lap joints are easily made

Description : . Lap joints are preferred over butt joints in soldering/brazing, because these joints are (A) Weaker in tension but stronger in shear (B) Weaker in shear but stronger in tension (C) Stronger in both shear and tension (D) The lap joints are easily made

Last Answer : r: Option D

A bolometer is (A) Used for the measurement of thermal radiation (B) An element which senses optical input and delivers thermal output (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : A bolometer is (A) Used for the measurement of thermal radiation (B) An element which senses optical input and delivers thermal output (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Terylene is (A) Same as Dacron (B) A polyester (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Terylene is (A) Same as Dacron (B) A polyester (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Starting material for the production of SBR is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Starting material for the production of SBR is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Natural rubber is obtained from latex, which is a colloidal dispersion of rubber in water. Which of the following is used as a coagulant in latex? (A) Ammonium alum (B) Potassium alum(C) Both ‘a’ & ‘b’(D) Neither ‘a’ nor ‘b

Description : Natural rubber is obtained from latex, which is a colloidal dispersion of rubber in water. Which of the following is used as a coagulant in latex? (A) Ammonium alum (B) Potassium alum (C) Both ‘a’ & ‘b’ (D) Neither ‘a’ nor ‘b

Last Answer : (C) Both ‘a’ & ‘b

Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Description : Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive

Aniline point is the (A) Characteristic property of diesel & lubricating oils (B) Measure of aromatic content of oil (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Aniline point is the (A) Characteristic property of diesel & lubricating oils (B) Measure of aromatic content of oil (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B

Refractive index of a petrofuel which is the ratio of velocity of light in air to its velocity in the petrofuel gives an indication if its (A) Molecular weight (B) Aromatics content (C) Both ‘a’ & ‘b’ (D) Neither ‘a’ nor ‘b’

Description : Refractive index of a petrofuel which is the ratio of velocity of light in air to its velocity in the petrofuel gives an indication if its (A) Molecular weight (B) Aromatics content (C) Both ‘a’ & ‘b’ (D) Neither ‘a’ nor ‘b’

Last Answer : (C) Both ‘a’ & ‘b

In nuclear reactions, __________ number is conserved. (A) Mass (B) Atomic (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In nuclear reactions, __________ number is conserved. (A) Mass (B) Atomic (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Horsepower required for a roll crusher is directly proportional to its (A) Reduction ratio (B) Capacity(C) Both (A) & (B)(D) Neither (A) nor (B)

Description : Horsepower required for a roll crusher is directly proportional to its (A) Reduction ratio (B) Capacity (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The constants (Kb, Kr and Kk) used in the laws of crushing (i.e., Bond's law, Rittinger's law and Kick's law) depend upon the (A) Feed material (B) Type of crushing machine (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The constants (Kb, Kr and Kk) used in the laws of crushing (i.e., Bond's law, Rittinger's law and Kick's law) depend upon the (A) Feed material (B) Type of crushing machine (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The grinding in a hammer crusher takes place due to the (A) Attrition (B) Impact (C) Both (A) & (B) (D) Neither (A) nor (B

Description : The grinding in a hammer crusher takes place due to the (A) Attrition (B) Impact (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)