Plutonium (A) Is recovered from spent fuel from thermal nuclear reactor (B) Has much lower melting point (640°C ) compared to thorium (1690°C) (C) Both (A) and (B) (D) Neither (A) nor (B)

Plutonium
(A) Is recovered from spent fuel from thermal nuclear reactor
(B) Has much lower melting point (640°C ) compared to thorium (1690°C)
(C) Both (A) and (B)
(D) Neither (A) nor (B)
by

1 Answer

Answer :

(C) Both (A) and (B
by

Related questions

Spent fuel from the nuclear thermal reactor contains (A) Fission products (B) Plutonium (C) Unused fuel (D) All (A), (B) & (C

Description : Spent fuel from the nuclear thermal reactor contains (A) Fission products (B) Plutonium (C) Unused fuel (D) All (A), (B) & (C

Last Answer : (D) All (A), (B) & (C

Nuclear fuel usually used in a Boiling Water Reactor (BWR) is (A) Plutonium (B) Enriched uranium (C) Natural uranium (D) Thorium

Description : Nuclear fuel usually used in a Boiling Water Reactor (BWR) is (A) Plutonium (B) Enriched uranium (C) Natural uranium (D) Thorium

Last Answer : (B) Enriched uranium

Fuel for a nuclear reactor (thermal) is(A) Uranium(B) Plutonium(C) Radium(D) None of these

Description : Fuel for a nuclear reactor (thermal) is (A) Uranium (B) Plutonium (C) Radium (D) None of these

Last Answer : (A) Uranium

Fuel for a nuclear reactor (thermal) is (A) Uranium (B) Plutonium (C) Radium (D) None of these

Description : Fuel for a nuclear reactor (thermal) is (A) Uranium (B) Plutonium (C) Radium (D) None of these

Last Answer : (A) Uranium

Reactors in commercial nuclear power plants in the U.S. are often referred to as thermal reactors. A thermal reactor uses: w) fissionable plutonium-239 as fuel. x) a relatively low heat output. y) neutrons moderated to relatively low energies. z) liquid sodium as a coolant.

Description : Reactors in commercial nuclear power plants in the U.S. are often referred to as thermal reactors. A thermal reactor uses: w) fissionable plutonium-239 as fuel. x) a relatively low heat output. y) neutrons moderated to relatively low energies. z) liquid sodium as a coolant.

Last Answer : ANSWER: Y -- NEUTRONS MODERATED TO RELATIVELY LOW ENERGIES.

Fuel used in a Fast Breeder Reactor is -------? A. Uranium Oxide B. Uranium Plutonium carbide C. Uranium Plutonium Oxide (Answer) D. Uranium thorium Oxide E. None of these

Description : Fuel used in a Fast Breeder Reactor is -------? A. Uranium Oxide B. Uranium Plutonium carbide C. Uranium Plutonium Oxide (Answer) D. Uranium thorium Oxide E. None of these

Last Answer : C. Uranium Plutonium Oxide (Answer)

Which of the following is not a naturally occurring nuclear fuel? (A) Uranium-238 (B) Thorium-233 (C) Plutonium-239 (D) None of these

Description : Which of the following is not a naturally occurring nuclear fuel? (A) Uranium-238 (B) Thorium-233 (C) Plutonium-239 (D) None of these

Last Answer : (C) Plutonium-239

The most commonly used nuclear fuel in boiling water reactor is (A) Enriched uranium (B) Natural uranium (C) Plutonium

Description : The most commonly used nuclear fuel in boiling water reactor is (A) Enriched uranium (B) Natural uranium (C) Plutonium

Last Answer : (A) Enriched uranium

Fuel for a fast breeder nuclear reactor is (A) Plutonium (B) Uranium (C) Radium (D) Neptunium

Description : Fuel for a fast breeder nuclear reactor is (A) Plutonium (B) Uranium (C) Radium (D) Neptunium

Last Answer : (A) Plutonium

Thorium-232 is converted into uranium-233 in a/an __________ nuclear reactor. (A) Thermal (B) Fast breeder (C) Heavy water moderated (D) Enriched uranium

Description : Thorium-232 is converted into uranium-233 in a/an __________ nuclear reactor. (A) Thermal (B) Fast breeder (C) Heavy water moderated (D) Enriched uranium

Last Answer : (B) Fast breeder

A thermal nuclear reactor compared to a fast breeder reactor (A) Uses slower neutrons for fission (B) Uses faster neutrons for fission (C) Gives higher power density (D) Requires less fuel to run at the same power level

Description : A thermal nuclear reactor compared to a fast breeder reactor (A) Uses slower neutrons for fission (B) Uses faster neutrons for fission (C) Gives higher power density (D) Requires less fuel to run at the same power level

Last Answer : (A) Uses slower neutrons for fission

Thorium is mainly used (A) For the manufacture of gas mantles (B) As a fissile fuel in a nuclear reactor (C) In the manufacture of hydrogen bomb (D) In the treatment of cancer

Description : Thorium is mainly used (A) For the manufacture of gas mantles (B) As a fissile fuel in a nuclear reactor (C) In the manufacture of hydrogen bomb (D) In the treatment of cancer

Last Answer : (A) For the manufacture of gas mantles

Which of the following nuclear materials is fissile? (A) Uranium-238 (B) Thorium-232 (C) Plutonium-239 (D) None of these

Description : Which of the following nuclear materials is fissile? (A) Uranium-238 (B) Thorium-232 (C) Plutonium-239 (D) None of these

Last Answer : (C) Plutonium-239

The main use of HCl is in the (A) Drilling of petroleum wells and pickling of steel sheets (B) Manufacture of cationic detergent (C) Treatment of spent fuel of nuclear reactor (D) None of these

Description : The main use of HCl is in the (A) Drilling of petroleum wells and pickling of steel sheets (B) Manufacture of cationic detergent (C) Treatment of spent fuel of nuclear reactor (D) None of these

Last Answer : (A) Drilling of petroleum wells and pickling of steel sheets

The long range potential of nuclear energy in India depends on its reserves of – (1) thorium (2) uranium (3) plutonium (4) radium

Description : The long range potential of nuclear energy in India depends on its reserves of – (1) thorium (2) uranium (3) plutonium (4) radium

Last Answer : (2) uranium Explanation: India's domestic uranium reserves are small and the country is dependent on uranium imports to fuel its nuclear power industry. Since early 1990s, Russia has been a major supplier of nuclear fuel-to India.

Nuclear energy is a mineralbased energy source. It is derived from (1) uranium (2) thorium (3) plutonium (4) All of the above

Description : Nuclear energy is a mineralbased energy source. It is derived from (1) uranium (2) thorium (3) plutonium (4) All of the above

Last Answer : uranium

The long range potential of nuclear energy in India depends on its reserves of (1) thorium (2) uranium (3) plutonium (4) radium

Description : The long range potential of nuclear energy in India depends on its reserves of (1) thorium (2) uranium (3) plutonium (4) radium

Last Answer : uranium

A fast breeder reactor (A) Uses natural uranium as fuel (B) Does not require a moderator (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : A fast breeder reactor (A) Uses natural uranium as fuel (B) Does not require a moderator (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) Does not require a moderator

Thickness of stock does not affect the fuel economy of furnaces, if thematerial to be heated is of(A) Low emissivity(B) High thermal conductivity(C) Both (A) and (B)(D) Neither (A) nor (B)

Description : Thickness of stock does not affect the fuel economy of furnaces, if thematerial to be heated is of (A) Low emissivity (B) High thermal conductivity (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Fuel for a fast breeder reactor is (A) Plutonium (B) Uranium (C) Radium (D) Neptunium

Description : Fuel for a fast breeder reactor is (A) Plutonium (B) Uranium (C) Radium (D) Neptunium

Last Answer : (A) Plutonium

Thorium can be converted into U-233 in a __________ reactor. (A) Liquid metal cooled (B) Fast breeder (C) Thermal (D) Swimming pool

Description : Thorium can be converted into U-233 in a __________ reactor. (A) Liquid metal cooled (B) Fast breeder (C) Thermal (D) Swimming pool

Last Answer : (B) Fast breeder

Thermal shield is used in high powered nuclear reactors to (A) Protect the walls of the reactor from radiation damageB) Absorb the fast neutrons(C) Slow down the secondary neutrons(D) Protect the fuel element from coming in contact with the coolant

Description : Thermal shield is used in high powered nuclear reactors to (A) Protect the walls of the reactor from radiation damage B) Absorb the fast neutrons (C) Slow down the secondary neutrons (D) Protect the fuel element from coming in contact with the coolant

Last Answer : (A) Protect the walls of the reactor from radiation damage

Heat is generated in a nuclear reactor (thermal) by (A) Combustion of a nuclear fuel e.g. uranium (B) Fusion of atoms of uranium (C) Absorption of neutrons in uranium atoms (D) Fission of U-235 by neutrons

Description : Heat is generated in a nuclear reactor (thermal) by (A) Combustion of a nuclear fuel e.g. uranium (B) Fusion of atoms of uranium (C) Absorption of neutrons in uranium atoms (D) Fission of U-235 by neutrons

Last Answer : (D) Fission of U-235 by neutrons

Zircaloy used as a fuel cladding material in a nuclear reactor (thermal) is an alloy of zirconium (A) Tin, nickel, iron and chromium (B) And graphite

Description : Zircaloy used as a fuel cladding material in a nuclear reactor (thermal) is an alloy of zirconium (A) Tin, nickel, iron and chromium (B) And graphite

Last Answer : (A) Tin, nickel, iron and chromium

Fast breeder test reactor at Kalpakkam (INDIA) is designed for using (A) Thorium as a fertile material (B) U-238 as a fertile material (C) Helium as a coolant (D) Uranium ore directly as a fuel

Description : Fast breeder test reactor at Kalpakkam (INDIA) is designed for using (A) Thorium as a fertile material (B) U-238 as a fertile material (C) Helium as a coolant (D) Uranium ore directly as a fuel

Last Answer : (A) Thorium as a fertile material

Which of the following is a fuel for a fusion reactor (thermonuclear reactor)? (A) Deuterium and tritium (B) U-233 (C) Thorium (D) Heavy water

Description : Which of the following is a fuel for a fusion reactor (thermonuclear reactor)? (A) Deuterium and tritium (B) U-233 (C) Thorium (D) Heavy water

Last Answer : (A) Deuterium and tritium

Coke oven gas produced by high temperature carbonisation of coal (as compared to that produced by low temperature carbonisation), has (A) Higher calorific value (B) Lower hydrogen content (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Coke oven gas produced by high temperature carbonisation of coal (as compared to that produced by low temperature carbonisation), has (A) Higher calorific value (B) Lower hydrogen content (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

__________ increases with increase in pressure. (A) The melting point of wax (B) The boiling point of a liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : __________ increases with increase in pressure. (A) The melting point of wax (B) The boiling point of a liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

In a breeder reactor, new fuel is formed as non-fuel uranium-238 absorbs a neutron and ultimately becomes which of the following fissionable atoms: w) uranium-235 x) plutonium-239 y) uranium-239 z) neptunium-239

Description : In a breeder reactor, new fuel is formed as non-fuel uranium-238 absorbs a neutron and ultimately becomes which of the following fissionable atoms: w) uranium-235 x) plutonium-239 y) uranium-239 z) neptunium-239

Last Answer : ANSWER: X -- PLUTONIUM-239

Fast breeder reactors are most usable in India, because of our largest __________ deposits. (A) Thorium (B) Plutonium (C) Uranium (D) None of these

Description : Fast breeder reactors are most usable in India, because of our largest __________ deposits. (A) Thorium (B) Plutonium (C) Uranium (D) None of these

Last Answer : (A) Thorium

Which of the following is a non-fissile material? (A) Plutonium-239 (B) Uranium-235 (C) Uranium-233 (D) Thorium-232

Description : Which of the following is a non-fissile material? (A) Plutonium-239 (B) Uranium-235 (C) Uranium-233 (D) Thorium-232

Last Answer : (D) Thorium-232

Thorium-232 (a fertile material) on absorption of a neutron gets converted into __________ , which is a fissile material. (A) Thorium-233 (B) Uranium-235 (C) Uranium-233 (D) Plutonium-239

Description : Thorium-232 (a fertile material) on absorption of a neutron gets converted into __________ , which is a fissile material. (A) Thorium-233 (B) Uranium-235 (C) Uranium-233 (D) Plutonium-239

Last Answer : (C) Uranium-233

An element that does not occur in nature but can be produced artificially is – (1) thorium (2) radium (3) plutonium (4) uranium

Description : An element that does not occur in nature but can be produced artificially is – (1) thorium (2) radium (3) plutonium (4) uranium

Last Answer : (3) plutonium

Which of the following caused radioactive pollution along the coast of Kerala? (1) Plutonium (2) Zinc (3) Thorium (4) Radium

Description : Which of the following caused radioactive pollution along the coast of Kerala? (1) Plutonium (2) Zinc (3) Thorium (4) Radium

Last Answer : (3) Thorium Explanation: Thorium-rich monazite sand deposits on the Kerala coast have been responsible for natural radioactive contamination. It has been pronounced on the south-west coastal line of ... been found to have elevated levels of background radioactivity due to high abundance of thorium.

Which of the following elements is nonradioactive? (1) Uranium (2) Thorium (3) Plutonium (4) Zirconium

Description : Which of the following elements is nonradioactive? (1) Uranium (2) Thorium (3) Plutonium (4) Zirconium

Last Answer : (4) Zirconium Explanation: Zirconium is non-radioactive. It is a chemical element with the symbol Zr, atomic number 40 and atomic mass of 91.224. The name of zirconium is taken from the ... important source of zirconium. It is a lustrous, grey-white, strong transition metal that resembles titanium.

An element that does not occur in nature but can be produced artificially is-----? A. Plutonium (Answer) B. Uranium C. Radium D. Thorium

Description : An element that does not occur in nature but can be produced artificially is-----? A. Plutonium (Answer) B. Uranium C. Radium D. Thorium

Last Answer : A. Plutonium (Answer)

Which of the following caused radioactive pollution along the coast of Kerala ? (1) Plutonium (2) Zinc (3) Thorium (4) Radium

Description : Which of the following caused radioactive pollution along the coast of Kerala ? (1) Plutonium (2) Zinc (3) Thorium (4) Radium

Last Answer : Thorium

An element that does not occur in nature but can be produced artificially is (1) thorium (2) radium (3) plutonium (4) uranium

Description : An element that does not occur in nature but can be produced artificially is (1) thorium (2) radium (3) plutonium (4) uranium

Last Answer : plutonium

Which of the following elements is non-radioactive ? (1) Uranium (2) Thorium (3) Plutonium (4) Zirconium

Description : Which of the following elements is non-radioactive ? (1) Uranium (2) Thorium (3) Plutonium (4) Zirconium

Last Answer : Zirconium

Plutonium Plutonium is used as _____. A. Fuel for Nuclear Fission B. Fuel for Nuclear Fusion C. Source of Chemical Energy D. Source of Light Energy

Description : Plutonium Plutonium is used as _____. A. Fuel for Nuclear Fission B. Fuel for Nuclear Fusion C. Source of Chemical Energy D. Source of Light Energy

Last Answer : ANSWER: A

Plutonium is used as _____. A. Fuel for Nuclear Fission B. Fuel for Nuclear Fusion C. Source of Chemical Energy D. Source of Light Energy

Description : Plutonium is used as _____. A. Fuel for Nuclear Fission B. Fuel for Nuclear Fusion C. Source of Chemical Energy D. Source of Light Energy

Last Answer : ANSWER: A

Plutonium is used as _____. A. Fuel for Nuclear Fission B. Fuel for Nuclear Fusion C. Source of Chemical Energy D. Source of Light Energy

Description : Plutonium is used as _____. A. Fuel for Nuclear Fission B. Fuel for Nuclear Fusion C. Source of Chemical Energy D. Source of Light Energy

Last Answer : ANSWER: A

Brazing is the joining of metals (A) Without melting the base metal (B) With a non-ferrous filler (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Brazing is the joining of metals (A) Without melting the base metal (B) With a non-ferrous filler (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : Option C

Design of heterogamous catalytic reactor involves consideration of __________ steps. (A) Only chemical (B) Only physical (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Design of heterogamous catalytic reactor involves consideration of __________ steps. (A) Only chemical (B) Only physical (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Fats as compared to oils have (A) More unsaturated glycerides of fatty acids (B) Less unsaturated glycerides of fatty acids (C) Much higher reactivity to oxygen (D) Lower melting point

Description : Fats as compared to oils have (A) More unsaturated glycerides of fatty acids (B) Less unsaturated glycerides of fatty acids (C) Much higher reactivity to oxygen (D) Lower melting point

Last Answer : (B) Less unsaturated glycerides of fatty acids

Nuclear fuel generally used in reactors is uranium oxide instead of uranium, because the former has higher (A) Melting point, hence can be subjected to higher temperature (B) Density; hence core volume for a given power output would be smaller (C) Resistance to effects of irradiation (D) All (A), (B) and (C)

Description : Nuclear fuel generally used in reactors is uranium oxide instead of uranium, because the former has higher (A) Melting point, hence can be subjected to higher temperature (B) Density; hence core volume for a given ... be smaller (C) Resistance to effects of irradiation (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Nylon-66 compared to nylon-6 has (A) Lower melting point (B) More abrasion resistant properties (C) Higher hardness (D) All (A), (B) and (C)

Description : Nylon-66 compared to nylon-6 has (A) Lower melting point (B) More abrasion resistant properties (C) Higher hardness (D) All (A), (B) and (C)

Last Answer : (C) Higher hardness

Branched chair polymers as compared to linear polymers have (A) Higher melting point (B) Higher tensile strength (C) Lower density (D) None of these

Description : Branched chair polymers as compared to linear polymers have (A) Higher melting point (B) Higher tensile strength (C) Lower density (D) None of these

Last Answer : (C) Lower density

A metallic alloy in general as compared to their pure metal components is (A) More corrosion resistant (B) Having higher melting point (C) Having lower hardness, reactivity and fusibility (D) Having lower electrical conductivity

Description : A metallic alloy in general as compared to their pure metal components is (A) More corrosion resistant (B) Having higher melting point (C) Having lower hardness, reactivity and fusibility (D) Having lower electrical conductivity

Last Answer : (A) More corrosion resistant

Unsaturated oils compared to saturated oils have (A) Lower melting point & higher reactivity to oxygen (B) Higher melting point & higher reactivity to oxygen (C) Lower melting point & lower reactivity to oxygen (D) Higher melting point & lower reactivity to oxygen

Description : Unsaturated oils compared to saturated oils have (A) Lower melting point & higher reactivity to oxygen (B) Higher melting point & higher reactivity to oxygen (C) Lower melting point & lower reactivity to oxygen (D) Higher melting point & lower reactivity to oxygen

Last Answer : (A) Lower melting point & higher reactivity to oxygen