Evaporation losses depend upon (A) Area of the water surface and depth of the water (B) Nature of precipitation and type of vegetation (C) Humidity and wind velocity (D) All the above

Evaporation losses depend upon
(A) Area of the water surface and depth of the water
(B) Nature of precipitation and type of vegetation
(C) Humidity and wind velocity
(D) All the above
by

1 Answer

Answer :

Answer: Option D
by

Related questions

Evaporation from water surfaces exposed to air is not dependent of the: w) velocity of the wind x) humidity y) temperature z) depth of the water

Description : Evaporation from water surfaces exposed to air is not dependent of the: w) velocity of the wind x) humidity y) temperature z) depth of the water 

Last Answer : ANSWER: Z -- DEPTH OF THE WATER 

The efficiency of sedimentation tank does not depend upon (A) Depth of tank (B) Length of tank (C) Detention period (D) Velocity of water

Description : The efficiency of sedimentation tank does not depend upon  (A) Depth of tank  (B) Length of tank  (C) Detention period  (D) Velocity of water

Last Answer : (D) Velocity of water

Water gets evaporated from water surfaces and land surfaces, get converted into water drops at lower temperatures, flows over ground surface and finally meets its source, i.e. lake, sea, etc. This entire process is generally known as (A) Hydrological cycle (B) Water cycle (C) Evaporation and precipitation cycle (D) All the above

Description : Water gets evaporated from water surfaces and land surfaces, get converted into water drops at lower temperatures, flows over ground surface and finally meets its source, i.e. lake, sea, etc. This ... Hydrological cycle (B) Water cycle (C) Evaporation and precipitation cycle (D) All the above

Last Answer : (D) All the above

The degree of aridness of a geographic region is generally defined as the ratio of precipitation to: w) condensation x) evaporation y) transpiration z) snowpack depth

Description : The degree of aridness of a geographic region is generally defined as the ratio of precipitation to: w) condensation x) evaporation y) transpiration z) snowpack depth

Last Answer : ANSWER: X -- EVAPORATION

The strength and quality of concrete, depend upon: (A) Grading of aggregates (B) Surface area of aggregates (C) Shape of aggregates (D) All the above

Description : The strength and quality of concrete, depend upon: (A) Grading of aggregates (B) Surface area of aggregates (C) Shape of aggregates (D) All the above

Last Answer : Answer: Option D

The rate of emission of radiation by a body does not depend upon the (A) Wavelength of radiation (B) Surface temperature of the body (C) Nature of the surface (D) Shape and porosity of the body

Description : The rate of emission of radiation by a body does not depend upon the (A) Wavelength of radiation (B) Surface temperature of the body (C) Nature of the surface (D) Shape and porosity of the body

Last Answer : (D) Shape and porosity of the body

The rate of emission of radiation by a body does not depend upon the (A) Wavelength of radiation (B) Surface temperature of the body (C) Nature of the surface (D) Shape and porosity of the body

Description : The rate of emission of radiation by a body does not depend upon the (A) Wavelength of radiation (B) Surface temperature of the body (C) Nature of the surface (D) Shape and porosity of the body

Last Answer : (D) Shape and porosity of the body

Compressed air coming out from a punctured football  (a) becomes hotter  (b) becomes cooler1  (c) remains at the same temperature  (d) may become hotter or cooler depend-ing upon the humidity of the surround¬ing air  (e) attains atmospheric temperature.

Description : Compressed air coming out from a punctured football  (a) becomes hotter  (b) becomes cooler1  (c) remains at the same temperature  (d) may become hotter or cooler depend-ing upon the humidity of the surround¬ing air  (e) attains atmospheric temperature.

Last Answer : (b) becomes cooler1

State the significance of following terms : i) Hydrology ii) Surface run-off iii) Evaporation iv) Precipitation

Description : State the significance of following terms : i) Hydrology ii) Surface run-off iii) Evaporation iv) Precipitation

Last Answer : (i) Hydrology: It may be defined as the science which deals with the depletion and replenishment of water resources. Hydrology deals with the occurrence and distribution of water over and under earth's ... types:  a) Liquid precipitation (Rainfall)  b) Solid precipitation (Snow, Hail) 

The ideal angle of banking provided on roads a.Depends on (velocity)2 of vehicle b.Depends on the nature of road surface c.Depend on coefficient of friction between the road and the vehicle cantact point d.Depends on weight of the vehicle e.All above

Description : The ideal angle of banking provided on roads a.Depends on (velocity)2 of vehicle b.Depends on the nature of road surface c.Depend on coefficient of friction between the road and the vehicle cantact point d.Depends on weight of the vehicle e.All above

Last Answer : a. Depends on (velocity)2 of vehicle

Rain simulators are used for the determination of (A) Evaporation (B) Precipitation (C) Run off (D) Infiltration capacity

Description : Rain simulators are used for the determination of (A) Evaporation (B) Precipitation (C) Run off (D) Infiltration capacity

Last Answer : Answer: Option D

Consider the following statements: 1. Over the oceans there is more evaporation than precipitation. 2. On land it is more precipitation than evapo-transpiration. Which of these statements are correct? (a) Both 1 & 2 (b) Neither 1 nor 2 (c) 1 only (d) 2 only

Description : Consider the following statements: 1. Over the oceans there is more evaporation than precipitation. 2. On land it is more precipitation than evapo-transpiration. Which of these statements are correct? (a) Both 1 & 2 (b) Neither 1 nor 2 (c) 1 only (d) 2 only

Last Answer : (a) Both 1 & 2

Velocity of sound in air does not depend on – (1) Density of air (2) Temperature of air (3) Pressure of air (4) Humidity of air

Description : Velocity of sound in air does not depend on – (1) Density of air (2) Temperature of air (3) Pressure of air (4) Humidity of air

Last Answer : (3) Pressure of air Explanation: Assuming air to be an ideal gas, the speed of sound depends on temperature only. As air temperature increases, so does the speed of sound and vice versa. ... air pressure because the air pressure and air density are proportional to each other at the same temperature.

Velocity of sound in air does not depend on (1) Density of air (2) Temperature of air (3) Pressure of air (4) Humidity of air

Description : Velocity of sound in air does not depend on (1) Density of air (2) Temperature of air (3) Pressure of air (4) Humidity of air

Last Answer :  Pressure of air

Drag force acting on a body does not depend upon the (A) Density of the fluid (B) Density of the body (C) Velocity of the body (D) Projected area of the body

Description : Drag force acting on a body does not depend upon the (A) Density of the fluid (B) Density of the body (C) Velocity of the body (D) Projected area of the body

Last Answer : (B) Density of the body

Radiation heat transfer rates does not depend upon the (A) Type of absorbing surface (B) Distance between the heat source and the object receiving the heat (C) Surface area and temperature of the heat source (D) None of these

Description : Radiation heat transfer rates does not depend upon the (A) Type of absorbing surface (B) Distance between the heat source and the object receiving the heat (C) Surface area and temperature of the heat source (D) None of these

Last Answer : (D) None of these

During the constant rate period of drying of a solid, (A) Increased air humidity decreases the rate of drying (B) Increasing the air temperature decreases the drying rate (C) Surface evaporation of unbound moisture occurs (D) None of these

Description : During the constant rate period of drying of a solid, (A) Increased air humidity decreases the rate of drying (B) Increasing the air temperature decreases the drying rate (C) Surface evaporation of unbound moisture occurs (D) None of these

Last Answer : (C) Surface evaporation of unbound moisture occurs

With an increase in size of tube, the rise or depression of liquid in the tube due to surface tension will (A) Decrease (B) Increase (C) Remain unchanged (D) Depend upon the characteristics of liquid

Description : With an increase in size of tube, the rise or depression of liquid in the tube due to surface tension will (A) Decrease (B) Increase (C) Remain unchanged (D) Depend upon the characteristics of liquid

Last Answer : Answer: Option A

Sowing depth of dwarf wheat is directly depend upon

Description : Sowing depth of dwarf wheat is directly depend upon

Last Answer : Ans.Length of coleoptyle

Interception losses are due to (i) Evaporation (ii) Transpiration (iii) Stream flow The correct answer is (A) Only (i) (B) (i) and (ii) (C) (ii) and (iii) (D) (i), (ii) and (iii)

Description : Interception losses are due to (i) Evaporation (ii) Transpiration (iii) Stream flow The correct answer is (A) Only (i) (B) (i) and (ii) (C) (ii) and (iii) (D) (i), (ii) and (iii)

Last Answer : Answer: Option A

Filtration rate does not depend upon the (A) Pressure drop & area of filtering surface (B) Resistance of the cake & the septum (C) Properties of the cake & the filtrate (D) None of these

Description : Filtration rate does not depend upon the (A) Pressure drop & area of filtering surface (B) Resistance of the cake & the septum (C) Properties of the cake & the filtrate (D) None of these

Last Answer : (D) None of these

Thermal conductivity of a material does not depend upon its (A) Mass (B) Volume (C) Surface area (D) All 'a', 'b' & 'c'

Description : Thermal conductivity of a material does not depend upon its (A) Mass (B) Volume (C) Surface area (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Transpiration is least in (a) good soil moisture (b) high wind velocity (c) dry environment (d) high atmospheric humidity.

Description : Transpiration is least in (a) good soil moisture (b) high wind velocity (c) dry environment (d) high atmospheric humidity.

Last Answer : (d) high atmospheric humidity.

Richter Scale is used for measuring : (1) Velocity of wind (2) Density of liquid (3) Intensity of earthquake (4) Humidity of air

Description : Richter Scale is used for measuring : (1) Velocity of wind (2) Density of liquid (3) Intensity of earthquake (4) Humidity of air

Last Answer : Intensity of earthquake

While calculating the average depth of annual precipitation in a catchment basin, importance to individual rain-gauge station is given in (A) Arithmetical method (B) Thiessen's mean method (C) Isohyetal method (D) Both (b) and (c)

Description : While calculating the average depth of annual precipitation in a catchment basin, importance to individual rain-gauge station is given in (A) Arithmetical method (B) Thiessen's mean method (C) Isohyetal method (D) Both (b) and (c)

Last Answer : Answer: Option D

Assertion (A): Pressure, volume, and temperature are all extensive properties. Reason (R ) : Extensive properties depend upon the amount and nature of

Description : Assertion (A): Pressure, volume, and temperature are all extensive properties. Reason (R ) : Extensive properties depend upon the amount and nature of

Last Answer : Assertion (A): Pressure, volume, and temperature are all extensive properties. Reason (R ) : Extensive ... . D. If both Assertion & Reason are false.

The binary diffusivity in gases does not depend upon the (A) Pressure (B) Temperature (C) Nature of the components (D) None of these

Description : The binary diffusivity in gases does not depend upon the (A) Pressure (B) Temperature (C) Nature of the components (D) None of these

Last Answer : (D) None of these

Do Earth's continents gain or lose water, considering evaporation and precipitation together and how much?

Description : Do Earth's continents gain or lose water, considering evaporation and precipitation together and how much?

Last Answer : Plants consume water, in exchange we get oxygen. So the water levels are never the same I'd think.

Do Earth's oceans gain or lose water considering evaporation and precipitation together and how much is the difference?

Description : Do Earth's oceans gain or lose water considering evaporation and precipitation together and how much is the difference?

Last Answer : On average, if the climate remains stable the two processes balance out. During periods of cold, water gets locked up in the ice caps and the level of the ocean drops.

The frictional resistance in laminar flow does not depend on the (A) Area of surface in contact (B) Flow velocity (C) Fluid temperature (D) Pressure of flow

Description : The frictional resistance in laminar flow does not depend on the (A) Area of surface in contact (B) Flow velocity (C) Fluid temperature (D) Pressure of flow

Last Answer : (A) Area of surface in contact

The cooling effect in a cooling tower can be speeded up by (A) Increasing the air velocity and area of exposed wet surface (B) Reducing the barometric pressure (C) Reducing the humidity of the air (D) All (A), (B) and (C)

Description : The cooling effect in a cooling tower can be speeded up by (A) Increasing the air velocity and area of exposed wet surface (B) Reducing the barometric pressure (C) Reducing the humidity of the air (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Run off includes (A) Precipitation over catchment area of the stream and its attributaries (B) Surface run off (C) Ground water flow (D) All the above

Description : Run off includes (A) Precipitation over catchment area of the stream and its attributaries (B) Surface run off (C) Ground water flow (D) All the above

Last Answer : Answer: Option D

The consumptive use of water for a crop a. Is measured as the volume of water per unit area b. Is measured as depth of water on irrigated area c. May be supplied partly by precipitation and partly by irrigation d. All the above

Description : The consumptive use of water for a crop a. Is measured as the volume of water per unit area b. Is measured as depth of water on irrigated area c. May be supplied partly by precipitation and partly by irrigation d. All the above

Last Answer : d. All the above

The moment of inertia of a body does not depend upon a.The angular velocity of the body b.Mass of the body c.The distribution of mass in the body d.The axis of rotation of the body e.None of the above

Description : The moment of inertia of a body does not depend upon a.The angular velocity of the body b.Mass of the body c.The distribution of mass in the body d.The axis of rotation of the body e.None of the above

Last Answer : a. The angular velocity of the body

The moment of inertia of a body does not depend upon its – (1) axis of rotation (2) angular velocity (3) form of mass (4) distribution of mass

Description : The moment of inertia of a body does not depend upon its – (1) axis of rotation (2) angular velocity (3) form of mass (4) distribution of mass

Last Answer : (2) angular velocity Explanation: Moment of inertia is the mass property of a rigid body that determines the torque needed for a desired angular acceleration about an axis of rotation. Moment of inertia ... of moments of inertia of the masses making up the whole object, under the same conditions.

Shell side pressure drop in a shell and tube heat exchanger does not depend upon the (A) Baffle spacing & shell diameter (B) Tube diameter & pitch (C) Viscosity, density & mass velocity of shell side fluid (D) None of these

Description : Shell side pressure drop in a shell and tube heat exchanger does not depend upon the (A) Baffle spacing & shell diameter (B) Tube diameter & pitch (C) Viscosity, density & mass velocity of shell side fluid (D) None of these

Last Answer : (D) None of these

Theoretical head developed by a centrifugal pump does not depend upon the __________ the impeller. (A) Radius of (B) Speed of (C) Fluid velocity leaving (D) None of these

Description : Theoretical head developed by a centrifugal pump does not depend upon the __________ the impeller. (A) Radius of (B) Speed of (C) Fluid velocity leaving (D) None of these

Last Answer : (D) None of these

Transition from laminar flow to turbulent flow in fluid flow through a pipe does not depend upon the (A) Length of the pipe (B) Diameter of the pipe (C) Density of the fluid (D) Velocity of the fluid

Description : Transition from laminar flow to turbulent flow in fluid flow through a pipe does not depend upon the (A) Length of the pipe (B) Diameter of the pipe (C) Density of the fluid (D) Velocity of the fluid

Last Answer : (A) Length of the pipe

The moment of inertia of a body does not depend upon its (1) axis of rotation (2) angular velocity (3) form of mass (4) distribution of mass

Description : The moment of inertia of a body does not depend upon its (1) axis of rotation (2) angular velocity (3) form of mass (4) distribution of mass

Last Answer : angular velocity

Where does precipitation exceed evaporation?

Description : Where does precipitation exceed evaporation?

Last Answer : All dry, arid,and semiarid climates

What are the methods of treatment & disposal of radioactive wastes? (A) Evaporation & chemical precipitation (B) Biological methods & adsorption in ion exchange materials (C) Fixing into a solid mass with cement and sinking deep in the sea (D) All (A), (B) & (C)

Description : What are the methods of treatment & disposal of radioactive wastes? (A) Evaporation & chemical precipitation (B) Biological methods & adsorption in ion exchange materials (C) Fixing into a solid mass with cement and sinking deep in the sea (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

India has eight coastal states but more than half the sea salt is made along the Gujarat coast because (a) Gandhiji started the salt movement in Gujarat (b) Low rainfall and relative humidity are ideal for the production of salt through evaporation of sea water (c) Kandla port exports salt (d) The salinity of sea water is very high near the Gujarat coast

Description : India has eight coastal states but more than half the sea salt is made along the Gujarat coast because (a) Gandhiji started the salt movement in Gujarat (b) Low rainfall and relative humidity are ideal ... ) Kandla port exports salt (d) The salinity of sea water is very high near the Gujarat coast

Last Answer : Ans: (b)

When the rate of evaporation of water is zero, the relative humidity of the air is A. 0% B. 100% C. 50% D. unpredictable

Description : When the rate of evaporation of water is zero, the relative humidity of the air is A. 0% B. 100% C. 50% D. unpredictable

Last Answer : ANSWER : B

Make up water is supplied during cooling tower operation to compensate for water losses due to (A) Evaporation(B) Blowdown(C) Entrainment(D) All (A), (B) & (C)

Description : Make up water is supplied during cooling tower operation to compensate for water losses due to (A) Evaporation (B) Blowdown (C) Entrainment (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Even though bubble cap towers are very effective for humidification operation, they are not used commonly in industries, because of the (A) High evaporation losses of water (B) High pressure drop of the gas (C) Difficulty in its fabrication (D) None of these

Description : Even though bubble cap towers are very effective for humidification operation, they are not used commonly in industries, because of the (A) High evaporation losses of water (B) High pressure drop of the gas (C) Difficulty in its fabrication (D) None of these

Last Answer : (B) High pressure drop of the gas

The use of pressurized radiator cap is to a) Reduce evaporation loss b) Increase engine operating temperature c) Increase boiling point of water d) Reduce heat losses

Description : The use of pressurized radiator cap is to a) Reduce evaporation loss b) Increase engine operating temperature c) Increase boiling point of water d) Reduce heat losses

Last Answer : ans c

Pressure drag does not depend upon the(A) Roughness of surface of the body (B) Pressure of main flow only (C) Length of the body in flow direction (D) All (A), (B) and (C)

Description : Pressure drag does not depend upon the (A) Roughness of surface of the body (B) Pressure of main flow only (C) Length of the body in flow direction (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The angle of contact in case of a liquid depends upon (A) The nature of the liquid and the solid (B) The material which exists above the free surface of the liquid (C) Both of die above (D) Any one of the above

Description : The angle of contact in case of a liquid depends upon (A) The nature of the liquid and the solid (B) The material which exists above the free surface of the liquid (C) Both of die above (D) Any one of the above

Last Answer : Answer: Option C

According to Water-Cement Ratio Law, the strength of workable plastic concrete (A) Depends upon the amount of water used in the mix (B) Does not depend upon the quality of cement mixed with aggregates (C) Does not depend upon the quantity of cement mixed with aggregates (D) All the above

Description : According to Water-Cement Ratio Law, the strength of workable plastic concrete (A) Depends upon the amount of water used in the mix (B) Does not depend upon the quality of cement mixed with aggregates (C) Does not depend upon the quantity of cement mixed with aggregates (D) All the above

Last Answer : Answer: Option D