The rate of emission of radiation by a body does not depend upon the (A) Wavelength of radiation (B) Surface temperature of the body (C) Nature of the surface (D) Shape and porosity of the body

The rate of emission of radiation by a body does not depend upon the
(A) Wavelength of radiation
(B) Surface temperature of the body
(C) Nature of the surface
(D) Shape and porosity of the body
by

1 Answer

Answer :

(D) Shape and porosity of the body
by

Related questions

The rate of emission of radiation by a body does not depend upon the (A) Wavelength of radiation (B) Surface temperature of the body (C) Nature of the surface (D) Shape and porosity of the body

Description : The rate of emission of radiation by a body does not depend upon the (A) Wavelength of radiation (B) Surface temperature of the body (C) Nature of the surface (D) Shape and porosity of the body

Last Answer : (D) Shape and porosity of the body

The ratio of total radiating power to the absorptivity of the body depends upon the __________ as per Kirchoff’s law. (A) Wavelength of radiation (B) Nature of the body (C) Temperature of the body (D) None of these

Description : The ratio of total radiating power to the absorptivity of the body depends upon the __________ as per Kirchoff’s law. (A) Wavelength of radiation (B) Nature of the body (C) Temperature of the body (D) None of these

Last Answer : (C) Temperature of the body

Pick out the wrong statement. (A) Biological oxygen demand (B.O.D.) value of a sewerage sample is always lower than its chemical oxygen demand (C.O.D.) value (B) Environmental pollution by NOx emission is much higher by four stroke petrol engines as compared to the two stroke engines (C) Temperature in stratosphere rises with increasing altitude (D) The characteristic of a green house body is that it allows the long wavelength incoming solar radiation to come in but does not allow the short wavelength infra red radiation to escape out of the earth's atmosphere

Description : Pick out the wrong statement. (A) Biological oxygen demand (B.O.D.) value of a sewerage sample is always lower than its chemical oxygen demand (C.O.D.) value (B) Environmental pollution by ... in but does not allow the short wavelength infra red radiation to escape out of the earth's atmosphere

Last Answer : (D) The characteristic of a green house body is that it allows the long wavelength incoming solar radiation to come in but does not allow the short wavelength infra red radiation to escape out of the earth's atmosphere

Wavelength of radiation emitted by a body depends on the __________ of its surface. (A) Temperature (B) Area (C) Nature (D) All 'a', 'b' & 'c'

Description : Wavelength of radiation emitted by a body depends on the __________ of its surface. (A) Temperature (B) Area (C) Nature (D) All 'a', 'b' & 'c'

Last Answer : Option

Radiation heat transfer rates does not depend upon the (A) Type of absorbing surface (B) Distance between the heat source and the object receiving the heat (C) Surface area and temperature of the heat source (D) None of these

Description : Radiation heat transfer rates does not depend upon the (A) Type of absorbing surface (B) Distance between the heat source and the object receiving the heat (C) Surface area and temperature of the heat source (D) None of these

Last Answer : (D) None of these

Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder (C) The wavelength corresponding to maximum mono-chromatic emissive power increases with rise in temperature (D) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Description : Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate ... ) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Last Answer : (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder

The strength and quality of concrete, depend upon: (A) Grading of aggregates (B) Surface area of aggregates (C) Shape of aggregates (D) All the above

Description : The strength and quality of concrete, depend upon: (A) Grading of aggregates (B) Surface area of aggregates (C) Shape of aggregates (D) All the above

Last Answer : Answer: Option D

The binary diffusivity in gases does not depend upon the (A) Pressure (B) Temperature (C) Nature of the components (D) None of these

Description : The binary diffusivity in gases does not depend upon the (A) Pressure (B) Temperature (C) Nature of the components (D) None of these

Last Answer : (D) None of these

Evaporation losses depend upon (A) Area of the water surface and depth of the water (B) Nature of precipitation and type of vegetation (C) Humidity and wind velocity (D) All the above

Description : Evaporation losses depend upon (A) Area of the water surface and depth of the water (B) Nature of precipitation and type of vegetation (C) Humidity and wind velocity (D) All the above

Last Answer : Answer: Option D

Filtration rate does not depend upon the (A) Pressure drop & area of filtering surface (B) Resistance of the cake & the septum (C) Properties of the cake & the filtrate (D) None of these

Description : Filtration rate does not depend upon the (A) Pressure drop & area of filtering surface (B) Resistance of the cake & the septum (C) Properties of the cake & the filtrate (D) None of these

Last Answer : (D) None of these

Assertion (A): Pressure, volume, and temperature are all extensive properties. Reason (R ) : Extensive properties depend upon the amount and nature of

Description : Assertion (A): Pressure, volume, and temperature are all extensive properties. Reason (R ) : Extensive properties depend upon the amount and nature of

Last Answer : Assertion (A): Pressure, volume, and temperature are all extensive properties. Reason (R ) : Extensive ... . D. If both Assertion & Reason are false.

Black body radiations depends upon a) The shape and nature of the body b) The velocity of radiations and colour of the body c) The temperature of the body d) All of the above

Description : Black body radiations depends upon a) The shape and nature of the body b) The velocity of radiations and colour of the body c) The temperature of the body d) All of the above

Last Answer : c) The temperature of the body

Pressure drag does not depend upon the(A) Roughness of surface of the body (B) Pressure of main flow only (C) Length of the body in flow direction (D) All (A), (B) and (C)

Description : Pressure drag does not depend upon the (A) Roughness of surface of the body (B) Pressure of main flow only (C) Length of the body in flow direction (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Heat transfer rate to the charge/stock in a furnace does not depend upon the (A) Type of fuels viz. solid, liquid or gaseous (B) Flue gas temperature (C) Emissivity of refractory walls (D) Initial temperature of the charged stock

Description : Heat transfer rate to the charge/stock in a furnace does not depend upon the (A) Type of fuels viz. solid, liquid or gaseous (B) Flue gas temperature (C) Emissivity of refractory walls (D) Initial temperature of the charged stock

Last Answer : (A) Type of fuels viz. solid, liquid or gaseous

Rate constant for a first order reaction does not depend upon reaction time, extent of reaction and the initial concentration of reactants; but it is afunction of reaction temperature. In a chemical reaction, the time requiredto reduce the concentration of reactant from 100 gm moles/litre to 50 gmmoles/litre is same as that required to reduce it from 2 gm moles/litre to 1gm mole/litre in the same volume. Then the order of this reaction is:(A) 0(B) 1(C) 2(D) 3

Description : Rate constant for a first order reaction does not depend upon reaction time, extent of reaction and the initial concentration of reactants; but it is afunction of reaction temperature. In a chemical reaction, the time required to ... Then the order of this reaction is: (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (B) 1

Thermal conductivity of a conducting solid material depends upon its (A) Temperature (B) Porosity (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Thermal conductivity of a conducting solid material depends upon its (A) Temperature (B) Porosity (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The bulk density of aggregates does not depend upon: (A) Size and shape of aggregates (B) Specific gravity of aggregates (C) Grading of aggregates (D) Size and shape of the container

Description : The bulk density of aggregates does not depend upon: (A) Size and shape of aggregates (B) Specific gravity of aggregates (C) Grading of aggregates (D) Size and shape of the container

Last Answer : Answer: Option D

The absorptivity of a grey body at a given temperature __________ with increasing wavelength of radiation. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material

Description : The absorptivity of a grey body at a given temperature __________ with increasing wavelength of radiation. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material

Last Answer : (D) May increase or decrease; depends on the material

Pick out the wrong statement. (A) Heat transfer from a hot body to cold body by the emission of heat waves is called radiation (B) Filmwise condensation takes place on non-wettable surfaces (C) The boiling point of a solution is affected by liquid head as well as boiling point elevation (D) None of these

Description : Pick out the wrong statement. (A) Heat transfer from a hot body to cold body by the emission of heat waves is called radiation (B) Filmwise condensation takes place on non-wettable surfaces (C) The ... of a solution is affected by liquid head as well as boiling point elevation (D) None of these

Last Answer : (B) Filmwise condensation takes place on non-wettable surfaces

Which one of the following statements is correct? (A) During the day, earth reflects solar radiation (B) During the day, earth reflects both solar radiations the emission from its surface (C) During the night, earth emits radiation from its surface (D) All of these

Description : Which one of the following statements is correct? (A) During the day, earth reflects solar radiation (B) During the day, earth reflects both solar radiations the emission from its surface (C) During the night, earth emits radiation from its surface (D) All of these

Last Answer : Answer: Option D

Thermal conductivity of a material does not depend upon its (A) Mass (B) Volume (C) Surface area (D) All 'a', 'b' & 'c'

Description : Thermal conductivity of a material does not depend upon its (A) Mass (B) Volume (C) Surface area (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

A coalescer in a mixer-settler liquid-liquid extraction column (A) Comprises of thin bed of substances of extended surface having high porosity (B) Helps in increasing the bubble size entering the settler (C) Helps in increasing the settling rate of the bubbles (D) All 'a', 'b', & 'c'

Description :  A coalescer in a mixer-settler liquid-liquid extraction column (A) Comprises of thin bed of substances of extended surface having high porosity (B) Helps in increasing the bubble size entering the settler ... increasing the settling rate of the bubbles (D) All 'a', 'b', & 'c'

Last Answer : (D) All 'a', 'b', & 'c'

What is the nature of interference pattern at the contact edge of wedge shaped film (a) Always bright (b) Always dark (c) Bright or dark depending upon the thickness of other end (d) Bright or dark depending upon the wavelength of the light

Description : What is the nature of interference pattern at the contact edge of wedge shaped film (a) Always bright (b) Always dark (c) Bright or dark depending upon the thickness of other end (d) Bright or dark depending upon the wavelength of the light

Last Answer : (b) Always dark

The rate of emission of radiation, when a radioactive sample is placed in water,_________.

Description : The rate of emission of radiation, when a radioactive sample is placed in water,_________.

Last Answer : The rate of emission of radiation, when a radioactive sample is placed in water,_________. A. ... C. remains the same D. Cannot be determined

Which one of the following statement is correct? (A) Radiant energy expressed in Joules, is the energy associated with electromagnetic radiation (B) The rate of transfer of radiant energy is called flux and is expressed in watts (C) The radiant energy which falls upon a surface is termed as irradiance (D) All of these

Description : Which one of the following statement is correct? (A) Radiant energy expressed in Joules, is the energy associated with electromagnetic radiation (B) The rate of transfer of radiant energy is called flux ... ) The radiant energy which falls upon a surface is termed as irradiance (D) All of these

Last Answer : Answer: Option D

Heat transfer rate to the stock/charge in the furnace does not depend upon the(A) Emissivity of the refractory walls(B) Size of the furnace(C) Use of waste heat recovery equipments(D) Thickness of the stock

Description : Heat transfer rate to the stock/charge in the furnace does not depend upon the (A) Emissivity of the refractory walls (B) Size of the furnace (C) Use of waste heat recovery equipments (D) Thickness of the stock

Last Answer : (C) Use of waste heat recovery equipments

Friction factor for fluid flow in pipe does not depend upon the (A) Pipe length (B) Pipe roughness (C) Fluid density & viscosity (D) Mass flow rate of fluid

Description : Friction factor for fluid flow in pipe does not depend upon the (A) Pipe length (B) Pipe roughness (C) Fluid density & viscosity (D) Mass flow rate of fluid

Last Answer : A) Pipe length

The heat dissipated by from a surface depends upon its temperature and its characteristics like colour, roughness etc. (a) conduction (b) convection (c) radiation (d) any ofthe above

Description : The heat dissipated by from a surface depends upon its temperature and its characteristics like colour, roughness etc. (a) conduction (b) convection (c) radiation (d) any ofthe above

Last Answer : (c) radiation

The dew point of an unsaturated gas-vapor mixture does not depend upon the __________ of the mixture. (A) Composition (B) Temperature (C) Total pressure (D) All (A), (B) and (C)

Description : The dew point of an unsaturated gas-vapor mixture does not depend upon the __________ of the mixture. (A) Composition (B) Temperature (C) Total pressure (D) All (A), (B) and (C)

Last Answer : (B) Temperature

Shrinkage volume in cement setting does not depend upon the (A) Sand to cement ratio (B) Water to cement ratio (C) Ambient temperature fluctuation (D) Drying period

Description : Shrinkage volume in cement setting does not depend upon the (A) Sand to cement ratio (B) Water to cement ratio (C) Ambient temperature fluctuation (D) Drying period

Last Answer : (A) Sand to cement ratio

Extensive properties of a thermodynamic system depend upon the __________ of the system. (A) Specific volume (B) Temperature (C) Mass (D) Pressure

Description : Extensive properties of a thermodynamic system depend upon the __________ of the system. (A) Specific volume (B) Temperature (C) Mass (D) Pressure

Last Answer : (C) Mass

Cvfor an ideal gas (A) Does not depend upon temperature (B) Is independent of pressure only (C) Is independent of volume only (D) Is independent of both pressure and volume

Description : Cvfor an ideal gas (A) Does not depend upon temperature (B) Is independent of pressure only (C) Is independent of volume only (D) Is independent of both pressure and volume

Last Answer : (D) Is independent of both pressure and volume

The heat capacities for the ideal gas state depend upon the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The heat capacities for the ideal gas state depend upon the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Temperature

Pick out the correct statement. (A) A lower temperature favours the reaction of lower activation energy (B) The dispersion number for a reactor/vessel is uL/D (C) The rate controlling step in a reaction involving many steps is the fastest step (D) Pore volume and porosity of a catalyst is measured by Brunauer￾Emmett-Teller (BET) technique

Description : Pick out the correct statement. (A) A lower temperature favours the reaction of lower activation energy (B) The dispersion number for a reactor/vessel is uL/D (C) The rate controlling step in ... step (D) Pore volume and porosity of a catalyst is measured by Brunauer￾Emmett-Teller (BET) technique

Last Answer : (A) A lower temperature favours the reaction of lower activation energy

The statement that "maximum wavelength of radiation is inversely proportional to the temperature" is __________ law. (A) Stefan-Boltzmann’s (B) Planck's (C) Wien's displacement (D) None of these

Description : The statement that "maximum wavelength of radiation is inversely proportional to the temperature" is __________ law. (A) Stefan-Boltzmann’s (B) Planck's (C) Wien's displacement (D) None of these

Last Answer : (C) Wien's displacement

Drag force acting on a body does not depend upon the (A) Density of the fluid (B) Density of the body (C) Velocity of the body (D) Projected area of the body

Description : Drag force acting on a body does not depend upon the (A) Density of the fluid (B) Density of the body (C) Velocity of the body (D) Projected area of the body

Last Answer : (B) Density of the body

The rate of scaling of furnace stock depends upon the (A) Temperature (B) Time(C) Nature of atmosphere(D) All (A), (B) and (C)

Description : The rate of scaling of furnace stock depends upon the (A) Temperature (B) Time (C) Nature of atmosphere (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

With an increase in size of tube, the rise or depression of liquid in the tube due to surface tension will (A) Decrease (B) Increase (C) Remain unchanged (D) Depend upon the characteristics of liquid

Description : With an increase in size of tube, the rise or depression of liquid in the tube due to surface tension will (A) Decrease (B) Increase (C) Remain unchanged (D) Depend upon the characteristics of liquid

Last Answer : Answer: Option A

A 'body' which allows the short wavelength incoming solar radiation to enter in, but does not allow long wave length outgoing infra red radiation to escape out is called the (A) Global warming (B) Green house (C) Atmospheric effect (D) Ionosphere

Description : A 'body' which allows the short wavelength incoming solar radiation to enter in, but does not allow long wave length outgoing infra red radiation to escape out is called the (A) Global warming (B) Green house (C) Atmospheric effect (D) Ionosphere

Last Answer : (B) Green house

The ideal angle of banking provided on roads a.Depends on (velocity)2 of vehicle b.Depends on the nature of road surface c.Depend on coefficient of friction between the road and the vehicle cantact point d.Depends on weight of the vehicle e.All above

Description : The ideal angle of banking provided on roads a.Depends on (velocity)2 of vehicle b.Depends on the nature of road surface c.Depend on coefficient of friction between the road and the vehicle cantact point d.Depends on weight of the vehicle e.All above

Last Answer : a. Depends on (velocity)2 of vehicle

The emission of number of photo electrons depends upon a) The colour of the body b) The frequency of incident light c) The intensity of light d) All of the above

Description : The emission of number of photo electrons depends upon a) The colour of the body b) The frequency of incident light c) The intensity of light d) All of the above

Last Answer : c) The intensity of light

The effect of the temperature rising above 100ºC on heat-cured denture-base acrylic resins is: A. Produces porosity on the external portion of the resin. B. Produces porosity on the internal portion of the resin. C. Produces porosity on the surface of the resin. D. Prevents porosity on the interior of the resin

Description : The effect of the temperature rising above 100ºC on heat-cured denture-base acrylic resins is: A. Produces porosity on the external portion of the resin. B. Produces porosity on the internal portion ... porosity on the surface of the resin. D. Prevents porosity on the interior of the resin

Last Answer : B. Produces porosity on the internal portion of the resin.

Rough surface/Porosity of porcelain is a result of: A. Lack of compression/ condensation B. Sudden high temperature

Description : Rough surface/Porosity of porcelain is a result of: A. Lack of compression/ condensation B. Sudden high temperature

Last Answer : A. Lack of compression/ condensation

The main purpose of control rod in a nuclear reactor is to control the (A) Chain reaction and hence the power output by regulating the number of secondary neutrons causing fission (B) Emission of hazardous radiation (C) Conversion of fissile material into fertile material (D) Velocity of the secondary neutrons

Description : The main purpose of control rod in a nuclear reactor is to control the (A) Chain reaction and hence the power output by regulating the number of secondary neutrons causing fission (B) ... radiation (C) Conversion of fissile material into fertile material (D) Velocity of the secondary neutrons

Last Answer : (A) Chain reaction and hence the power output by regulating the number of secondary neutrons causing fission

The coefficient of friction depends upon (A) Nature of surfaces (B) Area of contact (C) Shape of the surfaces (D) All of the above

Description : The coefficient of friction depends upon (A) Nature of surfaces (B) Area of contact (C) Shape of the surfaces (D) All of the above

Last Answer : (A) Nature of surfaces

The sky appears blue because of – (1) Atmospheric water vapour (2) Scattering of light (3) Reflection on sea water (4) Emission of blue wavelength by the sun

Description : The sky appears blue because of – (1) Atmospheric water vapour (2) Scattering of light (3) Reflection on sea water (4) Emission of blue wavelength by the sun

Last Answer : (2) Scattering of light Explanation: The sky is blue because the molecules in the air scatter light in the higher wavelengths (that is, the blue light), while lower wavelength light (that is ... reflected down from the scattering is blue, therefore a blue sky. This is called Rayleigh scattering.

Absorption of light of one wave length by a substance and the re-emission of light of greater wavelength is called?

Description : Absorption of light of one wave length by a substance and the re-emission of light of greater wavelength is called?

Last Answer : Fluorescence

Where do the electrical charges reside in a charged conductor? (1) at the core (2) throughout the body (3) depended upon the nature of the body (4) outer surface of the body

Description : Where do the electrical charges reside in a charged conductor? (1) at the core (2) throughout the body (3) depended upon the nature of the body (4) outer surface of the body

Last Answer : (4) outer surface of the body Explanation: In all conductors, charges reside on the surface. The reason for this is that conductors have free electrons, that is, the electrons are loosely ... field just, outside the conductor is perpendicular to the surface and that the field inside is zero.

Where do the electrical charges reside in a charged conductor? (1) at the core (2) throughout the body (3) depended upon the nature of the body (4) outer surface of the body

Description : Where do the electrical charges reside in a charged conductor? (1) at the core (2) throughout the body (3) depended upon the nature of the body (4) outer surface of the body

Last Answer : (4) outer surface of the body Explanation: In all conductors, charges reside on the surface. The reason for this is that conductors have free electrons, that is, the electrons are loosely ... field just, outside the conductor is perpendicular to the surface and that the field inside is zero.