Why the use of thermal Insulator is very important in various industries. 

1 Answer

Answer :

The loss of heat takes place by conduction, convection and radiation. Thermal insulators prevent this loss of heat. They act as barriers or retarders in the passage of heat. Due to this property thermal insulator is very important in various industries.

Related questions

Description : State any four characteristics of a thermal insulator. 

Last Answer : Characteristics of thermal insulator: 1) Its thermal conductivity should be low 2) It should be fire proof 3) It should be cheap 4) It should be colourless 5) Its density should be low 6) It ... odourless 9) It should be light in weight 10)It should be capable of bearing load in working operation.

Description : Is iron nail a thermal insulator?

Last Answer : No, it is a conductor. Get one end hot, the heat is conducted tothe other end pretty quickly.

Description : Diamond is a good thermal conductor. But it is an excellent electrical insulator. How?

Last Answer : Diamond crystal is a three-dimensional network of carbon atoms. All carbon atoms in the network are strongly bonded by carbon-carbon covalent bonds. Therefore diamond crystal has a highly ... in diamond crystal to ficilitate electrial conduction. Thus diamond is an excellent electrical insulator.

Description : Graphite is a good (A) Thermal & electrical insulator (B) Conductor of heat (C) Conductor of electricity (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

Description : What is the thermal conductivity of a perfect heat insulator? (A) Zero (B) One (C) ∞ (D) Between 0 and ∞

Last Answer : (A) Zero

Description : Ice skating is possible and practical because of a unique property of water. Is it because: w) The coefficient of kinetic friction of steel on frozen water decreases with decreasing temperature x ... sublimes y) The melting point decreases with increasing pressure z) Ice is a good thermal insulator 

Last Answer : ANSWER: Y -- THE MELTING POINT DECREASES WITH INCREASING PRESSURE 

Description : How do industries create thermal and noise pollution ? -SST 10th

Last Answer : Hot water from factories when is allowed to flow into rivers and ponds is caused thermal pollution. Thermal pollution would affect on aquatic life greatly. Industrial and constructional ... machineries create unwanted sound of intolerable nature which impaired human ears and nervous breakdown.

Description : How do industries create thermal and noise pollution ? -SST 10th

Last Answer : Hot water from factories when is allowed to flow into rivers and ponds is caused thermal pollution.

Description : The places Alwaye, Koyna and Korba have (a) Aluminium Industries (b) Thermal Power Plants (c) Oil Refineries (d) Nuclear Power Plants

Last Answer : Ans: (a)

Description : Which one among the following industries is the maximum consumer of water in India? (1) paper and Pulp (2) Thermal Power (3) Engineering (4) Textile

Last Answer : (2) Thermal Power Explanation: Indian Thermal Power Plants are one of the highest consumers of water as compared to their global counterparts. On an average, for every 1000 Kwh power, Indian TPPs consume as much as 80 cubic meters of water. It consumes 87.87% of industrial water use in India.

Description : Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Last Answer : (C) High corrosion resistance

Description : If the loss tangent is very less, then the material will be a a) Conductor b) Lossless dielectric c) Lossy dielectric d) Insulator

Last Answer : b) Lossless dielectric

Description : What type of insulator works well at very high frequencies?

Last Answer : A shorted quarter-wave section called a metallic insulator.

Description : A wire having very high value of conductance is said to be a. very good conductor b. moderately good conductor c. an insulator d. None

Last Answer : a. very good conductor

Description : How do various industries boost the agricultural sectors? -Geography

Last Answer : Textile, Cotton textile, Jute textiles, Sugar industries, woollen, silk textile, rubber, and tea, coffee and edible oil are agro-based industries which led to the improved the agricultural sector by ... farmers are supported by this industry as they are engaged in the cultivation of Jute and Mesta.

Description : Describe the various physical and human factors responsible for the location of industries. -SST 10th

Last Answer : (i) Physical Factors: (a) Availability of raw materials-Ideal location should be near the sources of raw materials. (b) Power resources-Power resources like coal and electricity must be available for ... efficient labour (b) Capital and bank facilities \ (c) Good market (d) Transport facility

Description : Pipelines carrying various utilities in chemical industries are identified by their colour codes. The color of pipeline carrying steam is (A) Black (B) Silver grey (C) Green (D) Yellow

Last Answer : ) Silver grey

Description : Compare pin type and suspension insulators on given points: (i) Position of insulator on cross arm. (ii) Position of conductor on insulator. (iii) Reaction on cross arm. (iv) Possibility of ... Replacement cost (vi) Maximum voltage level (vii) Effect on height of supporting structure. (viii) Life 

Last Answer : S.No  Points Pin Type insulator Suspension or Disc Type insulator 1 Position of insulator on cross arm It is fixed on top of cross arm by using galvanized steel pin. So it is ... so to maintain minimum ground clearance height of pole increase.  8 Life Less More

Description : What is difference between Conductor and insulator ?

Last Answer : Conductor is a material that offers no resistance to the flow of current, while an insulator is a material that offers total resistance to the flows of current, It doesn't allowed any flows of current.

Description : What is another name for an insulator?

Last Answer : Dielectric material is another name for an insulator.

Description : How does the resistance of a conductor compare to that of an insulator?

Last Answer : The resistance of a conductor can be significantly lower than the resistance of an insulator, depending on each material's atomic properties.

Description : State the function of (i) Neutral section, (ii) Section insulator, (iii) Un-insulated overlap, (iv) Insulated overlap.

Last Answer : i) Neutral section: Passing of pantograph under insulated overlap will cause short circuit between two phases of the supply system, damaging OHE & pantograph. To avoid this bridging of two ... belong to two elementary sections. Located at feeding posts, sub sectioning posts and booster sections.

Description : Give purpose and location of i) Uninsulated overlap. ii) Insulated overlap. iii) Neutral section. iv) Section insulator.

Last Answer : Ans: i) Insulated overlap: To isolate for operation and maintenance of OHE if two lengths of OHE belong to two elementary sections. Located at feeding posts, sub sectioning posts and booster sections.  ... elementary section. Located at cross over from one track to other, from main line to siding.

Description : In a 3-insulator string voltage distribution system the ratio of capacitance between pin and earth to the self capacitance of each unit is 1/4. If the potential across the top unit is 8 kV, then the string voltage is (A) 22.5 kV (B) 24 kV (C) 26 kV (D) 32.5 kV

Last Answer : In a 3-insulator string voltage distribution system the ratio of capacitance between pin and earth to the self capacitance of each unit is 1/4. If the potential across the top unit is 8 kV, then the string voltage is 32.5 kV

Description : what is insulator ?

Last Answer : A material that does not allow the flow of current or heat.

Description : Pick out the correct statement. (A) 1 kcal/hr.m.°C is equal to 1 BTU/hr. ft.°F (B) In steady state heat conduction, the only property of the substance which determines the ... in the direction of temperature rise (D) In heat transfer by forced convection, Grashoff number is very important

Last Answer : (B) In steady state heat conduction, the only property of the substance which determines the temperature distribution, is the thermal conductivity

Description : In Computer Crime, VIRUS stands fora. Vital Information Resouce Under Seize b.Very Important Resouce Under Seize c. Various Information Resouce Under Seize d. None of these

Last Answer : a. Vital Information Resouce Under Seize

Description : In Computer Crime, VIRUS stands fora. Vital Information Resouce Under Seize b.Very Important Resouce Under Seize c. Various Information Resouce Under Seize d. None of these

Last Answer : a. Vital Information Resouce Under Seize

Description : State various thermal insulating materials. State any two properties of insulating material

Last Answer : Thermal insulating materials: 1) Asbestos 2) Aluminum Foil 3) Thermocol 4) Saw dust 5) Cork board slabs 6) Foam glass 7) Rock Wool 8) Glass Wool 9) ... . h) Presence of Moisture: with the increase in moisture content, the coefficient of thermal conductivity rises greatly

Description : Even though bubble cap towers are very effective for humidification operation, they are not used commonly in industries, because of the (A) High evaporation losses of water (B) High pressure drop of the gas (C) Difficulty in its fabrication (D) None of these

Last Answer : (B) High pressure drop of the gas

Description : Mention the important industries of Australia. -Geography

Last Answer : The major industries and producing centers are Iron and Steel industry, Automobile industry, Ship building, Electrical machinery, Textile, Paper, Paperboard and pulp industries, Oil refining.

Description : Name two textile industries using any animal fibres. Name an important State where these industries are located. -Geography

Last Answer : Two textiles industries are : 1. Woollen Industry State—Punjab. 2. Silk Industry State—Karnataka.

Description : Why is mica considered the most important mineral in electric and electronic industries? -SST 10th

Last Answer : Mica is: (i) Excellent dielectric in strength and has low powerless factor. (ii) It has insulating properties and resistance to high voltage. (iii) Most indispensable mineral used in electric and electronic industries.

Description : What Are Some Important Industries In The Atlantic Coast States?

Last Answer : Feel Free to Answer

Description : Recently a leading politician, Salahuddin Quader Chaudhry, was hanged in Bangladesh. His father Fazlul Qauder Chaudhry, had served on an important position in Pakistan prior to separation of Bengladesh, Please ... : A. Vice President B. Speaker C. Minister of Industries D. Governor of East Pakistan

Last Answer : ANSWER: C

Description : Recently a leading politician, Salahuddin Quader Chaudhry, was hanged in Bangladesh. His father Fazlul Qauder Chaudhry, had served on an important position in Pakistan prior to separation of Bengladesh, Please ... : A. Vice President B. Speaker C. Minister of Industries D. Governor of East Pakistan

Last Answer : ANSWER: C

Description : Sun belt of U.S.A. is important for which one of the following industries? (1) Cotton textile (2) Petro- chemical (3) Hi-tech electronics (4) Food processing

Last Answer : (2) Petro- chemical Explanation: The Sun Belt is a region of the United States which became synonymous with the southern third of the nation in the early 1970s when there was a shift ... consumers of their products. The oil industry helped propel southern states such as Texas and Louisiana forward.

Description : In how many industries the State was to play an active role? A. 13 important industries B. 12 industries C. 15 industries D. 16 firms

Last Answer : B. 12 industries

Description : Match List I (Industries) with List II (Important Centers) and select the correct answer using the code given below : L i st I L i st I I (I n dust r i es) (I m por t an t Cent er s) A. Cotton textile I. Ludhiana B. Hosiery II. ... I, C-II, D-III (3) A-III, B-II, C-I, D-IV (4) A-III, B-I, C-II, D-IV

Last Answer : (4) A-III, B-I, C-II, D-IV

Description : Sun belt of U.S.A. is important for which one of the following industries? (1) Cotton textile (2) Petro- chemical (3) Hi-tech electronics (4) Food processing 

Last Answer : Petro- chemical

Description : Electricians use rubber gloves while working because - (1) rubber is an insulator (2) rubber is a good conductor (3) wearing rubber gloves is mandatory (4) rubber makes work easy

Last Answer : (1) rubber is an insulator

Description : Why are Metals good conductor of heat than insulator? -General Knowledge

Last Answer : The answer is 'They contain free electrons'

Description : Why are Metals good conductor of heat than insulator? -General Knowledge

Last Answer : answer:

Description : Penny conductor or insulator?

Last Answer : Copper is a conductor, so and pennies are coated in copper.

Description : Is a coin a insulator or a conductor?

Last Answer : A very good conductor.

Description : Is Rubber insulator or conductor?

Last Answer : Rubber is an insulator.

Description : Is wood a conductor or a insulator?

Last Answer : Wood is a conductor, though not a very good one.

Description : Is styrofoam insulator or conductor?

Last Answer : Styrofoam is an insulator.

Description : Is copper insulator or conductor?

Last Answer : Conductor, which is why it's used for wires.

Description : Is plastic insulator or conductor?

Last Answer : Plastic is an insulator.