For C band Synthetic Aperture Radar (SAR) with Doppler band width of 1300 Hz, the coherence length loch is: (A) 130 km (B) 230 km (C) 250 km (D) 500 km

For C band Synthetic Aperture Radar (SAR) with Doppler band width of 1300 Hz, the coherence
length loch is:
(A) 130 km
(B) 230 km
(C) 250 km
(D) 500 km
by

1 Answer

Answer :

Answer: Option B
by

Related questions

Which of the following contributes to the broadening of laser emission bandwidth? a. Doppler shift of moving atoms and molecules b. Amplification within the laser medium c. Coherence of the laser light d. Optical pumping of the laser transition

Description : Which of the following contributes to the broadening of laser emission bandwidth? a. Doppler shift of moving atoms and molecules b. Amplification within the laser medium c. Coherence of the laser light d. Optical pumping of the laser transition

Last Answer : a. Doppler shift of moving atoms and molecules

Which of the following contributes to the broadening of laser emission bandwidth? ∙ a. Doppler shift of moving atoms and molecules ∙ b. Amplification within the laser medium ∙ c. Coherence of the laser light ∙ d. Optical pumping of the laser transition

Description : Which of the following contributes to the broadening of laser emission bandwidth? ∙ a. Doppler shift of moving atoms and molecules ∙ b. Amplification within the laser medium ∙ c. Coherence of the laser light ∙ d. Optical pumping of the laser transition

Last Answer : Doppler shift of moving atoms and molecules

A speaker cabinet has an internal volume 84,950 cm3 . It has a port area on the baffle of 3,230 cm2 and baffle thickness of 19 mm. What is the Helmholtz resonance hertz of this speaker enclosure? A. 260 Hz B. 245 Hz C. 265 Hz D. 250 Hz

Description : A speaker cabinet has an internal volume 84,950 cm3 . It has a port area on the baffle of 3,230 cm2 and baffle thickness of 19 mm. What is the Helmholtz resonance hertz of this speaker enclosure? A. 260 Hz B. 245 Hz C. 265 Hz D. 250 Hz

Last Answer : B. 245 Hz

or Indian standard (IS) screens, the mesh number is equal to its aperture size expressed to the nearest deca-micron (0.01 mm). Aperture width of IS screen of mesh number 50 will be approximately __________ microns. (A) 5 (B) 50 (C) 500 (D) 5000

Description : or Indian standard (IS) screens, the mesh number is equal to its aperture size expressed to the nearest deca-micron (0.01 mm). Aperture width of IS screen of mesh number 50 will be approximately __________ microns. (A) 5 (B) 50 (C) 500 (D) 5000

Last Answer : (C) 500

Can over use of the wifes fetal doppler radar harm the baby in any way?

Description : Can over use of the wifes fetal doppler radar harm the baby in any way?

Last Answer : answer:What is a fetal doppler radar? I have heard them in conjunction with tracking the weather, but not fetuses. Not an answer, sorry, but I am curious. and too lazy to google it

The Doppler variation is directly proportional to what radar contact characteristic?

Description : The Doppler variation is directly proportional to what radar contact characteristic?

Last Answer : Velocity.

A Doppler Radar operating at 15 GHz is viewing a target moving directly towards it at the speed of 25 m/s.

Description : A Doppler Radar operating at 15 GHz is viewing a target moving directly towards it at the speed of 25 m/s. The Doppler frequency shift

Last Answer : A Doppler Radar operating at 15 GHz is viewing a target moving directly towards it at the speed of 25 m/s. The Doppler frequency shift 2.5 KHz

What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Description : What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Last Answer : C. 125,000

The coherence length over which there is a strong relationship between amplitudes is; (A) Directly proportional to the bandwidth (B) Inversely proportional to the bandwidth (C) The square of the bandwidth (D) None of these

Description : The coherence length over which there is a strong relationship between amplitudes is; (A) Directly proportional to the bandwidth (B) Inversely proportional to the bandwidth (C) The square of the bandwidth (D) None of these

Last Answer : Answer: Option B

For a 500 Hz frequency excitation, a 50 km long power line will be modeled as

Description : For a 500 Hz frequency excitation, a 50 km long power line will be modeled as

Last Answer : For a 500 Hz frequency excitation, a 50 km long power line will be modeled as long line

What is the bandwidth available in the commercial C-band? A. 1000 MHz B. 36 MHz C. 250 MHz D. 500 MHz

Description : What is the bandwidth available in the commercial C-band? A. 1000 MHz B. 36 MHz C. 250 MHz D. 500 MHz

Last Answer : D. 500 MHz

The brain of human adult weighs about - (1) 1200 - 1300 gm (2) 1600 - 2000 gm (3) 500 - 800 gm (4) 104 - 200 gm

Description : The brain of human adult weighs about - (1) 1200 - 1300 gm (2) 1600 - 2000 gm (3) 500 - 800 gm (4) 104 - 200 gm

Last Answer : (1) 1200 - 1300 gm Explanation: The adult human brain weighs on average about 3 lbs. (1.5 kg) with a volume of around 1130 cubic centimetres (cm3) in women and 1260 cm3 in men, although ... same general structure as the brains of other mammals, but is larger than any other in relation to body size.

The brain of human adult weighs about-----? A. 1200 – 1300 gm (Answer) B. 1600 – 2000 gm C. 500 – 800 gm D. 100 – 200 gm

Description : The brain of human adult weighs about-----? A. 1200 – 1300 gm (Answer) B. 1600 – 2000 gm C. 500 – 800 gm D. 100 – 200 gm

Last Answer : A. 1200 – 1300 gm (Answer)

The calorific value of producer gas is around __________ kcal/Nm3 . (A) 1300 (B) 500 (C) 4500 (D) 9000

Description : The calorific value of producer gas is around __________ kcal/Nm3 . (A) 1300 (B) 500 (C) 4500 (D) 9000

Last Answer : (A) 1300

Industrial steam generators operate at a steam capacity of? (rra) 1300 kg/s (rrb) 1000 kg/s (rrc) 500 kg/s ( d) 125 kg/s

Description : Industrial steam generators operate at a steam capacity of? (rra) 1300 kg/s (rrb) 1000 kg/s (rrc) 500 kg/s ( d) 125 kg/s

Last Answer : ( d) 125 kg/s

The brain of human adult weighs about (1) 1200 – 1300 gm (2) 1600 – 2000 gm (3) 500 – 800 gm (4) 100 – 200 gm

Description : The brain of human adult weighs about (1) 1200 – 1300 gm (2) 1600 – 2000 gm (3) 500 – 800 gm (4) 100 – 200 gm

Last Answer :  1200 – 1300 gm

An identified source of irrigation water has ion concentrations of Na+ , Ca++ and Mg++ as 20, 10 and 8 milliequivalents per litre, respectively. The SAR of this water is approximately : a) 2.06 b) 6.67 c) 2.67 d) zero

Description : An identified source of irrigation water has ion concentrations of Na+ , Ca++ and Mg++ as 20, 10 and 8 milliequivalents per litre, respectively. The SAR of this water is approximately : a) 2.06 b) 6.67 c) 2.67 d) zero

Last Answer : b) 6.67

If the velocity of moving vehicles on a road is 24 km/per hour, stopping distance is 19 metres and average length of vehicles is 6 metres, the basic capacity of lane, is (A) 500 vehicles per hour (B) 700 vehicles per hour (C) 1000 vehicles per hour (D) 1250 vehicles per hour

Description : If the velocity of moving vehicles on a road is 24 km/per hour, stopping distance is 19 metres and average length of vehicles is 6 metres, the basic capacity of lane, is (A) 500 vehicles per hour (B) 700 vehicles per hour (C) 1000 vehicles per hour (D) 1250 vehicles per hour

Last Answer : Answer: Option C

A single-phase, 230 V, 50 Hz ac mains fed step down transformer (4:1) is supplying power to a half-wave

Description : A single-phase, 230 V, 50 Hz ac mains fed step down transformer (4:1) is supplying power to a half-wave uncontrolled ac-dc converter used for charging a battery (12 V dc) with the series current limiting resistor being 19.04 Ohm. The charging current is  (A) 2.43 A (B) 1.65 A (C) 1.22 A (D) 1.0 A

Last Answer : A single-phase, 230 V, 50 Hz ac mains fed step down transformer (4:1) is supplying power to a half-wave uncontrolled ac-dc converter used for charging a battery (12 V dc) with the series current limiting resistor being 19.04 Ohm. The charging current is 1.0 A

The locked rotor current in a 3-phase, star connected 15 , kW 4 , pole 230 V , 50 Hz induction motor at rated

Description : The locked rotor current in a 3-phase, star connected 15 , kW 4 , pole 230 V , 50 Hz induction motor at rated conditions is 50 A. Neglecting losses and magnetizing current, the approximate locked rotor line current drawn when the motor ... Hz supply is  (A) 58.5 A (B) 45.0 A (C) 42.7 A (D) 55.6 A

Last Answer : The locked rotor current in a 3-phase, star connected 15 , kW 4 , pole 230 V , 50 Hz induction motor at rated conditions is 50 A. Neglecting losses and magnetizing current, the approximate locked rotor line current drawn when the motor is connected to a 236 , V 57 Hz supply is 45.0 A 

A d.c. voltage of 230 V is imposed on an unloaded 230 V, 50 Hz transformer, it will

Description : A d.c. voltage of 230 V is imposed on an unloaded 230 V, 50 Hz transformer, it will (A) give high secondary voltage (B) burn out (C) give secondary voltage as per k (D) None of these

Last Answer : A d.c. voltage of 230 V is imposed on an unloaded 230 V, 50 Hz transformer, it will burn out

A 230 V, 50 Hz phase controlled single-phase full-controlled SCR bridge converter draws 15 A constant dc

Description : A 230 V, 50 Hz phase controlled single-phase full-controlled SCR bridge converter draws 15 A constant dc current. If the source inductance is 3 mH, the drop in dc output voltage is (A) 4.5 V (B) 6.75 V (C) 9 V (D) 13.5 V

Last Answer : A 230 V, 50 Hz phase controlled single-phase full-controlled SCR bridge converter draws 15 A constant dc current. If the source inductance is 3 mH, the drop in dc output voltage is 9 V

In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load,

Description : In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load, the input source current is (A) sinusoidal current (B) constant dc current (C) continuous rectangular pulses (D) alternating rectangular pulses

Last Answer : In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load, the input source current is alternating rectangular pulses

The low voltage winding of a 400/230 V, 1-phase, 50 Hz transformer is to...

Description : The low voltage winding of a 400/230 V, 1-phase, 50 Hz transformer is to be connected to a 25 Hz, the supply voltage should be

Last Answer : The low voltage winding of a 400/230 V, 1-phase, 50 Hz transformer is to be connected to a 25 Hz, the supply voltage should be 115 V.

if voltage is 230 Volts , frequency is 50 Hz and current is 1 ampere then what will be the resistance?

Description : if voltage is 230 Volts , frequency is 50 Hz and current is 1 ampere then what will be the resistance?

Last Answer : As V = 230v and I = 1A Therfore by ohm's law V =IR R = V/I =230/1 =230 ohm

Diffraction due to circular aperture If a light passes through a small pinhole, and incident on a screen. What will be observed on the screen? A.A sharp bright point of the width equal to width the pinhole B. A bright point of the width equal to width the pinhole but of less intensity C. A bright ring at the centre surrounded by alternate dark and bright rings D. A diffused bright point

Description : Diffraction due to circular aperture If a light passes through a small pinhole, and incident on a screen. What will be observed on the screen? A.A sharp bright point of the width equal to ... A bright ring at the centre surrounded by alternate dark and bright rings D. A diffused bright point

Last Answer : C. A bright ring at the centre surrounded by alternate dark and bright rings

In Fresnel diffraction A. source of light is kept at infinite distance from the aperture B. source of light is kept at finite distance from the aperture C. Convex lens used D. aperture width is selected so that it can acts as a point source

Description : In Fresnel diffraction A. source of light is kept at infinite distance from the aperture B. source of light is kept at finite distance from the aperture C. Convex lens used D. aperture width is selected so that it can acts as a point source

Last Answer : B. source of light is kept at finite distance from the aperture

As per Taggart's formula, the capacity (kg/hr) of Jaw & Gyratory crushers (for gapes of 10 to 60 cms) is equal to (where, L = Length of feed opening, cms S = Maximum width of discharge opening, cms). (A) LS (B) 93 LS (C) 250 LS (D) √(LS)

Description : As per Taggart's formula, the capacity (kg/hr) of Jaw & Gyratory crushers (for gapes of 10 to 60 cms) is equal to (where, L = Length of feed opening, cms S = Maximum width of discharge opening, cms). (A) LS (B) 93 LS (C) 250 LS (D) √(LS)

Last Answer : (B) 93 LS

Coherence of two electromagnetic waves takes place if their phase difference is: A) Constant in time (B) Constant in space (C) Constant in time and space (D) None of these

Description : Coherence of two electromagnetic waves takes place if their phase difference is: A) Constant in time (B) Constant in space (C) Constant in time and space (D) None of these

Last Answer : Answer: Option C

. Molecular weight of petrol may be about (A) 40-60 (B) 100-130 (C) 250-300 (D) 350-400

Description : . Molecular weight of petrol may be about (A) 40-60 (B) 100-130 (C) 250-300 (D) 350-400

Last Answer : (B) 100-130

Acid dew point temperature (ADT) of a flue gas produced by the combustion of a fuel containing 1% sulphur may be about __________ °C. (A) 80 (B) 130 (C) 180 (D) 250

Description : Acid dew point temperature (ADT) of a flue gas produced by the combustion of a fuel containing 1% sulphur may be about __________ °C. (A) 80 (B) 130 (C) 180 (D) 250

Last Answer : (B) 130

A compound generator has a no-load voltage of 250 volts and a full-load voltage of 230 volts, and therefore, is considered to be _____________. A. flat compounded B. over compounded C. under compounded D. terminal compounded

Description : A compound generator has a no-load voltage of 250 volts and a full-load voltage of 230 volts, and therefore, is considered to be _____________. A. flat compounded B. over compounded C. under compounded D. terminal compounded

Last Answer : Answer: C

Sun revolves around milky way in about --- million years. A. 225 B. 230 (Answer) C. 245 D. 250

Description : Sun revolves around milky way in about --- million years. A. 225 B. 230 (Answer) C. 245 D. 250

Last Answer : B. 230 (Answer)

different types of crops are grown in India. a) 230 b) 260 c) 250 d) 220

Description : different types of crops are grown in India. a) 230 b) 260 c) 250 d) 220

Last Answer : 250

In a typical layout of a 215MW reheat power plant, the feed in the boiler is at? a) 280 degree Centigrade b) 230 degree Centigrade c) 238 degree Centigrade d) 250 degree Centigrade

Description : In a typical layout of a 215MW reheat power plant, the feed in the boiler is at? a) 280 degree Centigrade b) 230 degree Centigrade c) 238 degree Centigrade d) 250 degree Centigrade

Last Answer : c) 238 degree Centigrade

There are two sets of five numbers each – set P and set Q. P is a set of consecutive even numbers and Q is a set of consecutive numbers. The sum of the numbers of P is 230. The second least number in Q is 33 less than twice the least number in P. Find the sum of the numbers in Q. 1 : 260 2 : 250 3 : 240 4 : 270 5 : None of these

Description : There are two sets of five numbers each - set P and set Q. P is a set of consecutive even numbers and Q is a set of consecutive numbers. The sum of the numbers of P is 230. The second least number in Q is 33 less ... the sum of the numbers in Q. 1 : 260 2 : 250 3 : 240 4 : 270 5 : None of these

Last Answer : 1 : 260

The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm2 respectively. If m = 15, the depth of its neutral axis is (A) 20 cm (B) 25 cm (C) 30 cm (D) 35 cm

Description : The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm2 respectively. If m = 15, the depth of its neutral axis is (A) 20 cm (B) 25 cm (C) 30 cm (D) 35 cm

Last Answer : Answer: Option C

Width of the shoulders of carriage way is generally kept (A) 100 cm (B) 125 cm (C) 150 cm (D) 250 cm

Description : Width of the shoulders of carriage way is generally kept (A) 100 cm (B) 125 cm (C) 150 cm (D) 250 cm

Last Answer : Answer: Option D

A bridge is generally specified as “Br. No. 180 (5x9.10m G) at km 345/5-6”. a) Effective Span b) Width of bridge c) Clear Span* d) Overall length of bridge

Description : A bridge is generally specified as “Br. No. 180 (5x9.10m G) at km 345/5-6”. a) Effective Span b) Width of bridge c) Clear Span* d) Overall length of bridge

Last Answer : c) Clear Span*

The length of a Marconi antenna to operate with 985 kHz is ______. A. 200 ft B. 500 ft C. 250 ft D. 999 ft

Description : The length of a Marconi antenna to operate with 985 kHz is ______. A. 200 ft B. 500 ft C. 250 ft D. 999 ft

Last Answer : C. 250 ft

Extra widening required at a horizontal curve on a single lane hill road of radius 80 m for a design speed of 50 km ph and for a vehicle with wheel base 6.0 m is (A) 0.225 m (B) 0.589 m (C) 1.250 m (D) None of these

Description : Extra widening required at a horizontal curve on a single lane hill road of radius 80 m for a design speed of 50 km ph and for a vehicle with wheel base 6.0 m is (A) 0.225 m (B) 0.589 m (C) 1.250 m (D) None of these

Last Answer : Answer: Option B

One Astronomical unit is equal to how much Km in whole numbers? A. 160 million km B. 140 million km C. 150 million km (Answer) D. 130 million km

Description : One Astronomical unit is equal to how much Km in whole numbers? A. 160 million km B. 140 million km C. 150 million km (Answer) D. 130 million km

Last Answer : C. 150 million km (Answer)

Distance between two stations P & Q is 1556km. A passenger train covers the journey from P to Q at 168km per hr and return back to P with a uniform speed of 112km/hr. Find the Average speed of the train during the whole journey? A) 124.4 km/hr B) 130.4km/hr C) 134.4 km/hr D) 130.0 km/hr

Description : Distance between two stations P & Q is 1556km. A passenger train covers the journey from P to Q at 168km per hr and return back to P with a uniform speed of 112km/hr. Find the Average speed of the train during the whole journey? A) 124.4 km/hr B) 130.4km/hr C) 134.4 km/hr D) 130.0 km/hr

Last Answer : C) Given x= 168 , y = 112 Required average speed = (2xy / x + y) km/hr = 2 * 168 *112 / 168 + 112 = 37632 / 280 =134.4 km/hr

Two mail trains Pand Q of 300 m and 600m, run at speed of 130 km/hr and 160 km/hr respectively, in the direction opposite direction to each other. Find the time required to cross each other after the moment they met? A) 11.17 sec B) 12sec C) 9.10sec D) 21sec

Description : Two mail trains Pand Q of 300 m and 600m, run at speed of 130 km/hr and 160 km/hr respectively, in the direction opposite direction to each other. Find the time required to cross each other after the moment they met? A) 11.17 sec B) 12sec C) 9.10sec D) 21sec

Last Answer :  ANSWER:A Explanation:  Length of train P = 300 m  Length of train Q = 600 m  Speed of train p = 130 kmph  Convert km/hr into m/s,  Speed of train p =(130 *5/18)m/s  = 650/18 m/s  = 36.11 m/ ... train B)  = (300+600)m = 900 m We know, time =distance /speed  = 900/ 80.55  = 11.17seconds

Normal values of overflow rate for sedimentation tanks using coagulants in litres/hr/m2 , generally range between (A) 250 to 500 (B) 500 to 750 (C) 750 to 1000 (D) 1000 to 1250

Description : Normal values of overflow rate for sedimentation tanks using coagulants in litres/hr/m2 , generally range between (A) 250 to 500 (B) 500 to 750 (C) 750 to 1000 (D) 1000 to 1250

Last Answer : (D) 1000 to 1250

Normal values of overflow rate for plain sedimentation tanks in litres/hr/m2 , generally range between (A) 100 to 250 (B) 250 to 500 (C) 500 to 750 (D) 750 to 1000

Description : Normal values of overflow rate for plain sedimentation tanks in litres/hr/m2 , generally range  between  (A) 100 to 250  (B) 250 to 500  (C) 500 to 750  (D) 750 to 1000 

Last Answer : (C) 500 to 750 

Normal values of overflow rate for plain sedimentation tank, is (A) 250 to 500 litres/hr/m2 (B) 500 to 750 litres/hr/m2 (C) 750 to 1000 litres/hr/m2 (D) 1000 to 1250 litres/hr/m

Description : Normal values of overflow rate for plain sedimentation tank, is  (A) 250 to 500 litres/hr/m2 (B) 500 to 750 litres/hr/m2 (C) 750 to 1000 litres/hr/m2 (D) 1000 to 1250 litres/hr/m

Last Answer : (B) 500 to 750 litres/hr/m

Indian Meteorological department uses the standard gauges whose collectors have apertures of (A) 50 or 100 sq. cm area (B) 100 or 150 sq. cm area (C) 100 or 200 sq. cm area (D) 250 or 500 sq. cm area

Description : Indian Meteorological department uses the standard gauges whose collectors have apertures of (A) 50 or 100 sq. cm area (B) 100 or 150 sq. cm area (C) 100 or 200 sq. cm area (D) 250 or 500 sq. cm area

Last Answer : Answer: Option C

One cubic metre of water weighs (A) 100 litres (B) 250 litres (C) 500 litres (D) 1000 litres

Description : One cubic metre of water weighs (A) 100 litres (B) 250 litres (C) 500 litres (D) 1000 litres

Last Answer : Answer: Option D

One litre of water occupies a volume of (A) 100 cm3 (B) 250 cm3 (C) 500 cm3 (D) 1000 cm3

Description : One litre of water occupies a volume of (A) 100 cm3 (B) 250 cm3 (C) 500 cm3 (D) 1000 cm3

Last Answer : Answer: Option A