or Indian standard (IS) screens, the mesh number is equal to its aperture size expressed to the nearest deca-micron (0.01 mm). Aperture width of IS screen of mesh number 50 will be approximately __________ microns. (A) 5 (B) 50 (C) 500 (D) 5000

or Indian standard (IS) screens, the mesh number is equal to its
aperture size expressed to the nearest deca-micron (0.01 mm). Aperture
width of IS screen of mesh number 50 will be approximately __________
microns.
(A) 5
(B) 50
(C) 500
(D) 5000
by

1 Answer

Answer :

(C) 500
by

Related questions

Pick out the wrong statement. (A) Hammer crushers operate by impact action (B) Standard screens have circular opening (C) With increase in mesh number of screens, their diameter in microns decreases (D) 200 mesh screen has 200 openings per linear cm

Description : Pick out the wrong statement. (A) Hammer crushers operate by impact action (B) Standard screens have circular opening (C) With increase in mesh number of screens, their diameter in microns decreases (D) 200 mesh screen has 200 openings per linear cm

Last Answer : (D) 200 mesh screen has 200 openings per linear cm

Higher is the mesh number, smaller will be the aperture size of the screen. It means that the aperture size of a 200 mesh screen will be smaller than that of 20 mesh screen. This is valid for(A) British standard screens(B) German standard screens (DIN 1171) etc(C) American standard screens (ASTM and Tyler standard screens)(D) All (A), (B) and (C)

Description : Higher is the mesh number, smaller will be the aperture size of the screen. It means that the aperture size of a 200 mesh screen will be smaller than that of 20 mesh screen. This is valid for (A) British ... (C) American standard screens (ASTM and Tyler standard screens) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Work index is defined as the (A) Gross energy (kWh/ton of feed) needed to reduce very large feed to such a size that 80% of the product passes through a 100 micron screen (B) Energy needed to crush one tonne of feed to 200 microns (C) Energy (kWh/ton of feed) needed to crush small feed to such a size that 80% of the product passes a 200 mesh screen (D) Energy needed to crush one ton of feed to 100 microns

Description : Work index is defined as the (A) Gross energy (kWh/ton of feed) needed to reduce very large feed to such a size that 80% of the product passes through a 100 micron screen (B) Energy needed to crush ... of the product passes a 200 mesh screen (D) Energy needed to crush one ton of feed to 100 microns

Last Answer : (A) Gross energy (kWh/ton of feed) needed to reduce very large feed to such a size that 80% of the product passes through a 100 micron screen

Pulverised coal passing through 200 mesh screen has a diameter of 0.074 mm (74 micron). The same passing through 50 mesh screen will have a dia of __________ mm. (A) 0.007 (B) 0.30 (C) 50 (D) 0.014

Description : Pulverised coal passing through 200 mesh screen has a diameter of 0.074 mm (74 micron). The same passing through 50 mesh screen will have a dia of __________ mm. (A) 0.007 (B) 0.30 (C) 50 (D) 0.014

Last Answer : (B) 0.30

Very low pressure is expressed in microns (μ), which is equal to__________ mm of Hg column (absolute) at 0°C.(A) 0.0001(B) 0.001(C) 0.01(D) 0.1

Description : Very low pressure is expressed in microns (μ), which is equal to__________ mm of Hg column (absolute) at 0°C. (A) 0.0001 (B) 0.001 (C) 0.01 (D) 0.1

Last Answer : (B) 0.001

Vibrating screens have capacity in the range of __________ tons/ft 2 .mm mesh size. (A) 0.2 to 0.8 (B) 5 to 25 (C) 50 to 100 (D) 100 to 250

Description : Vibrating screens have capacity in the range of __________ tons/ft 2 .mm mesh size. (A) 0.2 to 0.8 (B) 5 to 25 (C) 50 to 100 (D) 100 to 250

Last Answer : (A) 0.2 to 0.8

The opening of a 200 mesh screen (Taylor series) is (A) 0.0074 cm (B) 0.0074 mm (C) 0.0047 cm (D) 74 milli-micron

Description : The opening of a 200 mesh screen (Taylor series) is (A) 0.0074 cm (B) 0.0074 mm (C) 0.0047 cm (D) 74 milli-micron

Last Answer : (A) 0.0074 cm

200 mesh sieve size corresponds to __________ microns. (A) 24 (B) 74 (C) 154 (D) 200

Description : 200 mesh sieve size corresponds to __________ microns. (A) 24 (B) 74 (C) 154 (D) 200

Last Answer : (B) 74

Brownian movement is prominent in the particle size range of __________ microns in case of settling of a particle in a fluid. (A) 2 to 3 (B) 0.01 to 0.10 (C) 200 to 300 (D) 100 to 1000

Description : Brownian movement is prominent in the particle size range of __________ microns in case of settling of a particle in a fluid. (A) 2 to 3 (B) 0.01 to 0.10 (C) 200 to 300 (D) 100 to 1000

Last Answer : A) 2 to 3

A micron is equal to – (1) 0.1 ram (2) 0.01 mm (3) 0.001 mm (4) 0.0001 mm

Description : A micron is equal to – (1) 0.1 ram (2) 0.01 mm (3) 0.001 mm (4) 0.0001 mm

Last Answer : (3) 0.001 mm Explanation: 1 micron = 0.001 millimeters. A micrometre (micron) is one-millionth of a metre (or one-thousandth of a millimetre, 0.001 mm). Its unit symbol in the ... is a common unit of measurement for wavelengths of infrared radiation as well as sizes of cells and bacteria.

A micron is equal to (1) 0.1 mm (2) 0.01 mm (3) 0.001 mm(4) 0.0001 mm

Description : A micron is equal to (1) 0.1 mm (2) 0.01 mm (3) 0.001 mm(4) 0.0001 mm

Last Answer : 0.001 mm

Size measurement of ultrafine particles can be best expressed in terms of (A) Centimetre (B) Screen size (C) Micron (D) Surface area per unit mass

Description : Size measurement of ultrafine particles can be best expressed in terms of (A) Centimetre (B) Screen size (C) Micron (D) Surface area per unit mass

Last Answer : (D) Surface area per unit mass

A sand mixture was screened through a standard 10-mesh screen. The mass fraction of the oversize material in feed, overflow and underflow were found to be 0.38, 0.79 and 0.22 respectively. The screen effectiveness based on the oversize is (A) 0.50 (B) 0.58 (C) 0.68 (D) 0.62

Description : A sand mixture was screened through a standard 10-mesh screen. The mass fraction of the oversize material in feed, overflow and underflow were found to be 0.38, 0.79 and 0.22 respectively. The screen effectiveness based on the oversize is (A) 0.50 (B) 0.58 (C) 0.68 (D) 0.62

Last Answer : (A) 0.50

Diffraction due to circular aperture If a light passes through a small pinhole, and incident on a screen. What will be observed on the screen? A.A sharp bright point of the width equal to width the pinhole B. A bright point of the width equal to width the pinhole but of less intensity C. A bright ring at the centre surrounded by alternate dark and bright rings D. A diffused bright point

Description : Diffraction due to circular aperture If a light passes through a small pinhole, and incident on a screen. What will be observed on the screen? A.A sharp bright point of the width equal to ... A bright ring at the centre surrounded by alternate dark and bright rings D. A diffused bright point

Last Answer : C. A bright ring at the centre surrounded by alternate dark and bright rings

Reciprocating screens are normally inclined at an angle of 5° with the horizontal and employ gyratory motion at feed end & reciprocating motion at the discharge end. They are not suitable for the screening of the (A) Light metal powder down upto 4 mesh size (B) Dry chemicals (C) Heavy tonnages of rocks or gravel (D) Powdered food & granular materials

Description : Reciprocating screens are normally inclined at an angle of 5° with the horizontal and employ gyratory motion at feed end & reciprocating motion at the discharge end. They are not suitable for the ... Dry chemicals (C) Heavy tonnages of rocks or gravel (D) Powdered food & granular materials

Last Answer : (C) Heavy tonnages of rocks or gravel

For achieving rapid drying rate in a spray dryer, the diameter of the particles in the feed should be in the range of __________ microns (1 mm = 1000 microns). (A) 1-5 (B) 10-60 (C) 200-300

Description : For achieving rapid drying rate in a spray dryer, the diameter of the particles in the feed should be in the range of __________ microns (1 mm = 1000 microns). (A) 1-5 (B) 10-60 (C) 200-300

Last Answer : (B) 10-60

If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, 6 kg, 4 kg respectively, the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Description : If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, ... , the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Last Answer : Answer: Option C

The drag co-efficient for a bacterium moving in water at 1 mm/s, will be of the following order of magnitude (assume size of the bacterium to be 1 micron and kinematic viscosity of water to be 10 -6m2 /s). (A) 24000 (B) 24 (C) 0.24(D) 0.44

Description : The drag co-efficient for a bacterium moving in water at 1 mm/s, will be of the following order of magnitude (assume size of the bacterium to be 1 micron and kinematic viscosity of water to be 10 -6m2 /s). (A) 24000 (B) 24 (C) 0.24(D) 0.44

Last Answer : (D) 0.44

Electro-magnetic spectrum range, which is important for radiation varies from __________ microns. (A) 1 to 100 (B) 0.5 to 50 (C) 10 to 100 (D) 100 to 1000

Description : Electro-magnetic spectrum range, which is important for radiation varies from __________ microns. (A) 1 to 100 (B) 0.5 to 50 (C) 10 to 100 (D) 100 to 1000

Last Answer : (B) 0.5 to 50

The range of electromagnetic spectrum important in heat transfer by radiation is __________ microns. (A) 0.38-0.78 (B) 0.5-50 (C) 100-1000 (D) 5-50

Description : The range of electromagnetic spectrum important in heat transfer by radiation is __________ microns. (A) 0.38-0.78 (B) 0.5-50 (C) 100-1000 (D) 5-50

Last Answer : (B) 0.5-50

In screen analysis, the notation +5 mm/-10 mm means particles passing through (A) 10 mm screen and retained on 5 mm screen (B) 5 mm screen and retained on 10 mm screen (C) Both 5 mm and 10 mm screens (D) Neither 5 mm nor 10 mm screen

Description : In screen analysis, the notation +5 mm/-10 mm means particles passing through (A) 10 mm screen and retained on 5 mm screen (B) 5 mm screen and retained on 10 mm screen (C) Both 5 mm and 10 mm screens (D) Neither 5 mm nor 10 mm screen

Last Answer : (A) 10 mm screen and retained on 5 mm screen

For C band Synthetic Aperture Radar (SAR) with Doppler band width of 1300 Hz, the coherence length loch is: (A) 130 km (B) 230 km (C) 250 km (D) 500 km

Description : For C band Synthetic Aperture Radar (SAR) with Doppler band width of 1300 Hz, the coherence length loch is: (A) 130 km (B) 230 km (C) 250 km (D) 500 km

Last Answer : Answer: Option B

The size of an atom is of the order of one (A) °Angstrom (B) Fermi (C) Micron (D) mm

Description : The size of an atom is of the order of one (A) °Angstrom (B) Fermi (C) Micron (D) mm

Last Answer : (A) °Angstrom

An ohmmeter used to test for front-to-back resistance of a PN junction diode should produce roughly what ratio? A. 100:01:00 B. 500:01:00 C. 1000:01:00 D. 5000:01:00

Description : An ohmmeter used to test for front-to-back resistance of a PN junction diode should produce roughly what ratio? A. 100:01:00 B. 500:01:00 C. 1000:01:00 D. 5000:01:00

Last Answer : Answer: A

Calorific value of dry wood may be around __________ Kcal/kg. (A) 5 (B) 50 (C) 500 (D) 5000

Description : Calorific value of dry wood may be around __________ Kcal/kg. (A) 5 (B) 50 (C) 500 (D) 5000

Last Answer : (A) 5

Transition length for a turbulent fluid entering into a pipe is around __________ times the pipe diameter. (A) 5 (B) 50 (C) 500 (D) 5000

Description : Transition length for a turbulent fluid entering into a pipe is around __________ times the pipe diameter. (A) 5 (B) 50 (C) 500 (D) 5000

Last Answer : (B) 50

From pollution control point of view, the maximum permissible concentration of sulphur dioxide in atmospheric air is about __________ ppm. (A) 5 (B) 50 (C) 500 (D) 5000

Description : From pollution control point of view, the maximum permissible concentration of sulphur dioxide in atmospheric air is about __________ ppm. (A) 5 (B) 50 (C) 500 (D) 5000

Last Answer : (A) 5

Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000

Description : Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000

Last Answer : (D) 5000-15000

Particle size range in which dust catcher (gravity settling chamber) works most effectively and efficiently is __________ microns. (A) < 5 (B) 10 to 25 (C) < 74 (D) > 1000

Description : Particle size range in which dust catcher (gravity settling chamber) works most effectively and efficiently is __________ microns. (A) < 5 (B) 10 to 25 (C) < 74 (D) > 1000

Last Answer : (C) < 74

What is the typical separation between the two conductors in a parallel wire line? A. 0.001 to 0.01 m B. 200 to 500 mm C. 0.635 to 15.24 cm D. 2.5 to 5 in.

Description : What is the typical separation between the two conductors in a parallel wire line? A. 0.001 to 0.01 m B. 200 to 500 mm C. 0.635 to 15.24 cm D. 2.5 to 5 in.

Last Answer : C. 0.635 to 15.24 cm

Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of 2 kJ/kg.K enters at 20°C. The log mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Description : Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of ... mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Last Answer : (A) 32

One micron is equal to- (1) 1/10th of mm (2) 1/100th of mm (3) 1/1000th of mm (4) 1/10000th of mm

Description : One micron is equal to- (1) 1/10th of mm (2) 1/100th of mm (3) 1/1000th of mm (4) 1/10000th of mm

Last Answer : (3) 1/1000th of mm Explanation: In the U.S. the thickness of paint is expressed in mils (one mil equals 1/1000 of inch). The rest of the world expresses coating thickness in microns (1 micron = 1 millionth of a meter and 25.4 microns = .001” inch or 1 mil).

One micron is equal to- (1) 1/10th of mm (2) 1/100th of mm (3) 1/1000th of mm (4) 1/10000th of mm

Description : One micron is equal to- (1) 1/10th of mm (2) 1/100th of mm (3) 1/1000th of mm (4) 1/10000th of mm

Last Answer : (3) 1/1000th of mm Explanation: In the U.S. the thickness of paint is expressed in mils (one mil equals 1/1000 of inch). The rest of the world expresses coating thickness in microns (1 micron = 1 millionth of a meter and 25.4 microns = .001” inch or 1 mil).

Heating value of coal is approximately (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg

Description : Heating value of coal is approximately (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg

Last Answer : Ans: C

Heating value of coal is approximately in power plant (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg.

Description : Heating value of coal is approximately in power plant (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg.

Last Answer : 5000-6500 kcal / kg

Capacity (in tons/hr) of jaw/gyratory crusher is equal to (where, L = length of the receiving opening, cm S = greater width of the discharge opening, cm). (A) 0.01 L.S (B) 0.087 L.S (C) L.S (D) L.S/0.087

Description : Capacity (in tons/hr) of jaw/gyratory crusher is equal to (where, L = length of the receiving opening, cm S = greater width of the discharge opening, cm). (A) 0.01 L.S (B) 0.087 L.S (C) L.S (D) L.S/0.087

Last Answer : (B) 0.087 L.S

The spacing of bars for perforations in coarse screens used for the treatment of sewage, is A. 20 mm B. 30 mm C. 40 mm D. 50 mm

Description : The spacing of bars for perforations in coarse screens used for the treatment of sewage, is A. 20 mm B. 30 mm C. 40 mm D. 50 mm

Last Answer : ANS: D

The difference in one unit of Rockwell hardness number corresponds to a difference in the depth of indentation of __________ mm. (A) 0.001 (B) 0.01 (C) 0.002 (D) 0.02

Description : The difference in one unit of Rockwell hardness number corresponds to a difference in the depth of indentation of __________ mm. (A) 0.001 (B) 0.01 (C) 0.002 (D) 0.02

Last Answer : Option C

Work index is the gross energy (kWh/tonne of feed) necessary to reduce a very large feed to such a size that 80% of product particles will pass through a 0.1 mm screen. The value of work index determined for wet grinding should be multiplied with __________ to get the same for dry grinding. (A) 1.0 (B) 0.5 (C) 1.34 (D) 4.34

Description : Work index is the gross energy (kWh/tonne of feed) necessary to reduce a very large feed to such a size that 80% of product particles will pass through a 0.1 mm screen. The value of work index determined for wet grinding should ... to get the same for dry grinding. (A) 1.0 (B) 0.5 (C) 1.34 (D) 4.34

Last Answer : (C) 1.34

Rotary vacuum pumps can reduce the absolute pressure to as low as __________ mm Hg. (A) 1 (B) 0.1 (C) 0.01 (D) 0.001

Description : Rotary vacuum pumps can reduce the absolute pressure to as low as __________ mm Hg. (A) 1 (B) 0.1 (C) 0.01 (D) 0.001

Last Answer : (C) 0.01

An eight stage ripple counter uses a flip-flop with propagation delay of 75 nanoseconds. The pulse width of the strobe is 50ns. The frequency of the input signal which can be used for proper operation of the counter is approximately (A) 1 MHz. (B) 500 MHz. (C) 2 MHz. (D) 4 MHz.

Description : An eight stage ripple counter uses a flip-flop with propagation delay of 75 nanoseconds. The pulse width of the strobe is 50ns. The frequency of the input signal which can be used for proper operation of the counter is approximately (A) 1 MHz. (B) 500 MHz. (C) 2 MHz. (D) 4 MHz.

Last Answer : Maximum time taken for all flip-flops to stabilize is 75ns x 8 + 50 = 650ns. Frequency of operation must be less than 1/650ns = 1.5 MHz.

Pick out the correct statement. (A) Plastic chips are called non-cohesive solids (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b ) (C) Communition is a generic term for size enlargement operation (D) Energy required in kwh per ton of product, such that 80% of it passes through a 200 mesh screen, is called 'Work index'

Description : Pick out the correct statement. (A) Plastic chips are called non-cohesive solids (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b ) (C) Communition is a generic term for size enlargement ... per ton of product, such that 80% of it passes through a 200 mesh screen, is called 'Work index'

Last Answer : (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b )

Maximum number of bases in plasmids discovered so far (a) 50 kilo base (b) 500 kilo base (c) 5000 kilo base (d) 5 kilo base.

Description : Maximum number of bases in plasmids discovered so far (a) 50 kilo base (b) 500 kilo base (c) 5000 kilo base (d) 5 kilo base.

Last Answer : (b) 500 kilo base

Smoke volatility index is equal to smoke point plus (A) 0.42 × (% distilled at 204°C) (B) 5 mm (C) 0.84 × (% distilled at 204°C) (D) 10 mm approximately

Description : Smoke volatility index is equal to smoke point plus (A) 0.42 × (% distilled at 204°C) (B) 5 mm (C) 0.84 × (% distilled at 204°C) (D) 10 mm approximately

Last Answer : (A) 0.42 × (% distilled at 204°C)

Sizing of very fine particles of the order of 5 to 10 microns is done by elutriation, which is a __________ operation. (A) Clarification(B) Sedimentation(C) Flocculation(D) Classification

Description : Sizing of very fine particles of the order of 5 to 10 microns is done by elutriation, which is a __________ operation. (A) Clarification (B) Sedimentation (C) Flocculation (D) Classification

Last Answer : (D) Classification

Numerical aperture is expressed as the a) NA = sin θa b) NA = cos θa c) NA = tan θa d) NA = sec θa

Description : Numerical aperture is expressed as the a) NA = sin θa b) NA = cos θa c) NA = tan θa d) NA = sec θa

Last Answer : a) NA = sin θa

1 micron how many mm ?

Description : 1 micron how many mm ?

Last Answer : 1 micron = 1/1000 mm.

1 hectometer = how many deca.m. ?

Description : 1 hectometer = how many deca.m. ?

Last Answer : 1 hectometer = 10 decimeters.

Trommels are revolving screens which normally operate in the range of __________ rpm. (A) 1 - 2 (B) 15 - 20 (C) 40 - 50 (D) 60 - 75

Description : Trommels are revolving screens which normally operate in the range of __________ rpm. (A) 1 - 2 (B) 15 - 20 (C) 40 - 50 (D) 60 - 75

Last Answer : (B) 15 - 20

Angstrom (Å) is equal to (a) 0.01 mm (b) 0.001 mm (c) 0.0001 mm (d) 0.00001 mm

Description : Angstrom (Å) is equal to (a) 0.01 mm (b) 0.001 mm (c) 0.0001 mm (d) 0.00001 mm

Last Answer : (b) 0.001 mm