The ideal efficiency of a Brayton cycle with regeneration, with increase in pressure ratio will  (a) increase  (b) decrease  (c) remain unchanged  (d) increase/decrease depending on ap-plication  (e) unpredictable. “

The ideal efficiency of a Brayton cycle with regeneration, with increase in pressure ratio will
 (a) increase
 (b) decrease
 (c) remain unchanged
 (d) increase/decrease depending on ap-plication
 (e) unpredictable. “
by

1 Answer

Answer :

Answer : b
by

Related questions

The ideal efficiency of a Brayton cycle without regeneration with increase ni pressure ratio will

Description : The ideal efficiency of a Brayton cycle without regeneration with increase ni pressure ratio will  (a) increase  (b) decrease  (c) remain unchanged  (d) increase/decrease depending on application  (e) unpredictable.

Last Answer : Answer : a

In an isothermal process, the internal energy of gas molecules  (a) increases  (b) decreases  (c) remains constant  (d) may increase/decrease depending on the properties of gas  (e) shows unpredictable behaviour.

Description : In an isothermal process, the internal energy of gas molecules  (a) increases  (b) decreases  (c) remains constant  (d) may increase/decrease depending on the properties of gas  (e) shows unpredictable behaviour.

Last Answer : Answer : c

Brayton cycle consists’ of following four processes  (a) two isothermals and two isentropics  (b) two isentropics and two constant volumes  (c) two isentropics, one constant volume and one constant pressure  (d) two isentropics and two constant pres-sures  (e) none of the above.

Description : Brayton cycle consists’ of following four processes  (a) two isothermals and two isentropics  (b) two isentropics and two constant volumes  (c) two isentropics, one constant volume and one constant pressure  (d) two isentropics and two constant pres-sures  (e) none of the above.

Last Answer : Answer : d

Which of the following cycles has maximum efficiency  (a) Rankine  (b) Stirling  (c) Carnot  (d) Brayton  (e) Joule.

Description : Which of the following cycles has maximum efficiency  (a) Rankine  (b) Stirling  (c) Carnot  (d) Brayton  (e) Joule.

Last Answer : Answer : c

An ideal gas as compared to a real gas at very high pressure occupies  (a) more volume  (b) less volume  (c) same volume  (d) unpredictable behaviour  (e) no such correlation.

Description : An ideal gas as compared to a real gas at very high pressure occupies  (a) more volume  (b) less volume  (c) same volume  (d) unpredictable behaviour  (e) no such correlation.

Last Answer : Answer : a

The following cycle is used for air craft refrigeration  (a) Brayton cycle  (b) Joule cycle  (c) Carnot cycle  (d) Bell-Coleman cycle  (e) Reversed-Brayton cycle.

Description : The following cycle is used for air craft refrigeration  (a) Brayton cycle  (b) Joule cycle  (c) Carnot cycle  (d) Bell-Coleman cycle  (e) Reversed-Brayton cycle.

Last Answer : Answer : e

Reversed joule cycle is called  (a) Carnot cycle  (b) Rankine cycle  (c) Brayton cycle  (d) Bell Coleman cycle  (e) Dual cycle.

Description : Reversed joule cycle is called  (a) Carnot cycle  (b) Rankine cycle  (c) Brayton cycle  (d) Bell Coleman cycle  (e) Dual cycle.

Last Answer : Answer : c

Thermal power plant works on  (a) Carnot cycle  (b) Joule cycle  (d) Rankine cycle  (d) Otto cycle  (e) Brayton cycle.

Description : Thermal power plant works on  (a) Carnot cycle  (b) Joule cycle  (d) Rankine cycle  (d) Otto cycle  (e) Brayton cycle.

Last Answer : Answer : c

It is used for gas turbines which operates on an open cycle where both the compression and expansion processes take place in rotating machinery.  a. Dual Cycle  b. Otto Cycle  c. Carnot Cycle  d. Brayton Cycle

Description : It is used for gas turbines which operates on an open cycle where both the compression and expansion processes take place in rotating machinery.  a. Dual Cycle  b. Otto Cycle  c. Carnot Cycle  d. Brayton Cycle

Last Answer : Brayton Cycle

Which of the following is used in thermal power plant?  a. Brayton cycle  b. Reversed carnot cycle  c. Rankine cycle  d. Otto cycle

Description : Which of the following is used in thermal power plant?  a. Brayton cycle  b. Reversed carnot cycle  c. Rankine cycle  d. Otto cycle

Last Answer : Rankine cycle

Which of the following cycle is used in vapor cycle power plant?  a. Brayton cycle  b. Diesel cycle  c. Ericson cycle  d. Rankine cycle

Description : Which of the following cycle is used in vapor cycle power plant?  a. Brayton cycle  b. Diesel cycle  c. Ericson cycle  d. Rankine cycle

Last Answer : Rankine cycle

The efficiency of Diesel cycle increases with  A. decrease in cut-off  B. increase in cut-off  C. constant cut-off  D. none of these

Description : The efficiency of Diesel cycle increases with  A. decrease in cut-off  B. increase in cut-off  C. constant cut-off  D. none of these

Last Answer : Answer: A

The efficiency of Diesei cycle with decrease in cut off  (a) increases  (b) decreases  (c) remains unaffected  (d) first increases and then decreases  (e) first decreases and then increases.

Description : The efficiency of Diesei cycle with decrease in cut off  (a) increases  (b) decreases  (c) remains unaffected  (d) first increases and then decreases  (e) first decreases and then increases.

Last Answer : Answer : a

The door of a running refrigerator inside a room was left open. Which of the following statements is correct?  (a) The room will be cooled to the temperature inside the refrigerator.  (b) The room will be cooled very slightly.  (c) The room will be gradually warmed up.  (d) The temperature of the air in room will remain unaffected.  (e) any one of above is possible depending on the capacity.

Description : The door of a running refrigerator inside a room was left open. Which of the following statements is correct?  (a) The room will be cooled to the temperature inside the refrigerator.  (b) The room ... air in room will remain unaffected.  (e) any one of above is possible depending on the capacity.

Last Answer : Answer : c

The efficiency of Diesel cycle depends upon  A. temperature limits  B. pressure ratio  C. compression ratio  D. cut-off ratio and compression ratio

Description : The efficiency of Diesel cycle depends upon  A. temperature limits  B. pressure ratio  C. compression ratio  D. cut-off ratio and compression ratio

Last Answer : Answer: D

The more effective way of increasing efficiency of Carnot engine is to  (a) increase higher temperature  (b) decrease higher temperature  (c) increase lower temperature  (d) decrease lower temperature  (e) keep lower temperature constant.

Description : The more effective way of increasing efficiency of Carnot engine is to  (a) increase higher temperature  (b) decrease higher temperature  (c) increase lower temperature  (d) decrease lower temperature  (e) keep lower temperature constant.

Last Answer : Answer : d

For same compression ratio and for same heat added  (a) Otto cycle is more efficient than Diesel cycle  (b) Diesel cycle is more efficient than Otto cycle  (c) efficiency depends on other factors  (d) both Otto and Diesel cycles are equally efficient  (e) none of the above.

Description : For same compression ratio and for same heat added  (a) Otto cycle is more efficient than Diesel cycle  (b) Diesel cycle is more efficient than Otto cycle  (c) efficiency depends on other factors  (d) both Otto and Diesel cycles are equally efficient  (e) none of the above.

Last Answer : Answer : a

The melting points of aldehydes and ketones tend to : (a) decrease with increasing molecular weight. (b) increase with increasing molecular weight. (c) remain unchanged with increasing molecular weight. (d) be unpredictable due to resonance

Description : The melting points of aldehydes and ketones tend to : (a) decrease with increasing molecular weight. (b) increase with increasing molecular weight. (c) remain unchanged with increasing molecular weight. (d) be unpredictable due to resonance

Last Answer : increase with increasing molecular weight.

The efficiency of a dual combustion cycle __________ upon cut-off ratio.  A. depends  B. does not depend

Description : The efficiency of a dual combustion cycle __________ upon cut-off ratio.  A. depends  B. does not depend

Last Answer : Answer: A

Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Description : Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Last Answer : Answer: D

When cut-off ratio is __________ the efficiency of Diesel cycle approaches to Otto cycle efficiency.  A. zero  B. 1/5  C. 4/5  D. 1

Description : When cut-off ratio is __________ the efficiency of Diesel cycle approaches to Otto cycle efficiency.  A. zero  B. 1/5  C. 4/5  D. 1

Last Answer : Answer: A

The efficiency and work ratio of a simple gas turbine cycle are  A.low  B.very low  C.high  D.very high

Description : The efficiency and work ratio of a simple gas turbine cycle are  A.low  B.very low  C.high  D.very high

Last Answer : Answer: B

The volume of a gas under constant pressure increases or decrease with temperature.  a. Gay- Lussac’s Law  b. Ideal Gas Law  c. Charles’ Law  d. Boyle’s Law

Description : The volume of a gas under constant pressure increases or decrease with temperature.  a. Gay- Lussac’s Law  b. Ideal Gas Law  c. Charles’ Law  d. Boyle’s Law

Last Answer : Charles’ Law

Friction factor for a hydraulically smooth pipe at NRe = 2100 is f1 . If the pipe is further smoothened (i.e., roughness is reduced), the friction factor at the same value of NRe , will (A) Increase (B) Decrease (C) Remain unchanged (D) Increase or decrease depending on the pipe material

Description : Friction factor for a hydraulically smooth pipe at NRe = 2100 is f1 . If the pipe is further smoothened (i.e., roughness is reduced), the friction factor at the same value of NRe , will (A) Increase (B) Decrease (C) Remain unchanged (D) Increase or decrease depending on the pipe material

Last Answer : (A) Increase

The feed to fractionating column is changed from saturated vapour to saturated liquid. If the separation and reflux ratio remains unchanged, the number of ideal stages will (A) Increase (B) Decrease (C) Remain same (D) Depend on saturated boiling point; may increase or decrease

Description : The feed to fractionating column is changed from saturated vapour to saturated liquid. If the separation and reflux ratio remains unchanged, the number of ideal stages will (A) Increase (B) Decrease (C) Remain same (D) Depend on saturated boiling point; may increase or decrease

Last Answer : (A) Increase

If the spring mass system with m and spring stiffness k is taken to very high altitude, the natural frequency of longitudinal vibrations * 1 point (A) increases (B) decreases (C) remain unchanged (D) may increase or decrease depending upon the value of the mass

Description : If the spring mass system with m and spring stiffness k is taken to very high altitude, the natural frequency of longitudinal vibrations * 1 point (A) increases (B) decreases (C) remain unchanged (D) may increase or decrease depending upon the value of the mass

Last Answer : (C) remain unchanged

If the spring mass system with m and spring stiffness k is taken to very high altitude , the natural frequency of longitudinal vibrations A) Increases B) Decreases C) Remain unchanged D) May be increase or decrease depending upon the value of the mass

Description : If the spring mass system with m and spring stiffness k is taken to very high altitude , the natural frequency of longitudinal vibrations A) Increases B) Decreases C) Remain unchanged D) May be increase or decrease depending upon the value of the mass

Last Answer : C) Remain unchanged

For reversible adiabatic process, change in entropy is  (a) maximum  (b) minimum  (c) zero  (d) unpredictable  (e) negative

Description : For reversible adiabatic process, change in entropy is  (a) maximum  (b) minimum  (c) zero  (d) unpredictable  (e) negative

Last Answer : Answer : c

The volume of a gas under standard atmospheric pressure & 76 cmHg is 200m³. What is the volume when pressure is 80 cmHg if the temperature is unchanged?  a) 180 in³  b) 170 in³  c) 160 in³  d) 190 in³ Formula: P2V2 = P1V1

Description : The volume of a gas under standard atmospheric pressure & 76 cmHg is 200m³. What is the volume when pressure is 80 cmHg if the temperature is unchanged?  a) 180 in³  b) 170 in³  c) 160 in³  d) 190 in³ Formula: P2V2 = P1V1

Last Answer : 190 in³

If both Stirling and Carnot cycles operate within the same temperature limits, then efficiency of Stirling cycle as compared to Carnot cycle  (a) more  (b) less  (c) equal  (d) depends on other factors  (e) none of the above.

Description : If both Stirling and Carnot cycles operate within the same temperature limits, then efficiency of Stirling cycle as compared to Carnot cycle  (a) more  (b) less  (c) equal  (d) depends on other factors  (e) none of the above.

Last Answer : Answer : c

The efficiency of Carnot cycle is maximum for  (a) gas engine  (b) well lubricated engine  (c) petrol engine  (d) steam engine  (e) reversible engine.

Description : The efficiency of Carnot cycle is maximum for  (a) gas engine  (b) well lubricated engine  (c) petrol engine  (d) steam engine  (e) reversible engine.

Last Answer : Answer : e

An actual engine is to be designed having same efficiency as the Carnot cycle. Such a proposition is  (a) feasible  (b) impossible  (c) possible  (d) possible, but with lot of sophistications  (e) desirable.

Description : An actual engine is to be designed having same efficiency as the Carnot cycle. Such a proposition is  (a) feasible  (b) impossible  (c) possible  (d) possible, but with lot of sophistications  (e) desirable.

Last Answer : Answer : d

Carnot cycle efficiency is maximum when  (a) initial temperature is 0°K  (b) final temperature is 0°K  (c) difference between initial and final temperature is 0°K  (d) final temperature is 0°C  (e) initial temperature is minimum possible.

Description : Carnot cycle efficiency is maximum when  (a) initial temperature is 0°K  (b) final temperature is 0°K  (c) difference between initial and final temperature is 0°K  (d) final temperature is 0°C  (e) initial temperature is minimum possible.

Last Answer : Answer : b

Carnot cycle efficiency depends upon  (a) properties of the medium/substance used  (b) condition of engine  (c) working condition  (d) temperature range of operation  (e) effectiveness of insulating material around the engine.

Description : Carnot cycle efficiency depends upon  (a) properties of the medium/substance used  (b) condition of engine  (c) working condition  (d) temperature range of operation  (e) effectiveness of insulating material around the engine.

Last Answer : Answer : d

Carnot cycle has maximum efficiency for  (a) reversible engine  (b) irreversible engine  (c) new engine  (d) petrol engine  (e) diesel engine.

Description : Carnot cycle has maximum efficiency for  (a) reversible engine  (b) irreversible engine  (c) new engine  (d) petrol engine  (e) diesel engine.

Last Answer : Answer : a

What is a heat engine that operates on the reversible Carnot cycle called?  A. Carnot heat engine  B. Ideal heat engine  C. Most efficient heat engine  D. Best heat engine

Description : What is a heat engine that operates on the reversible Carnot cycle called?  A. Carnot heat engine  B. Ideal heat engine  C. Most efficient heat engine  D. Best heat engine

Last Answer : Carnot heat engine

The efficiency of Joule cycle is  A. greater than Carnot cycle  B. less than Carnot cycle  C. equal to Carnot cycle  D. none of these

Description : The efficiency of Joule cycle is  A. greater than Carnot cycle  B. less than Carnot cycle  C. equal to Carnot cycle  D. none of these

Last Answer : Answer: B

The efficiency of Stirling cycle is __________ Carnot cycle.  A. greater than  B. less than  C. equal to

Description : The efficiency of Stirling cycle is __________ Carnot cycle.  A. greater than  B. less than  C. equal to

Last Answer : Answer: C

The efficiency of Diesel cycle approaches to Otto cycle efficiency when  A. cut-off is increased  B. cut-off is decreased  C. cut-off is zero  D. cut-off is constant

Description : The efficiency of Diesel cycle approaches to Otto cycle efficiency when  A. cut-off is increased  B. cut-off is decreased  C. cut-off is zero  D. cut-off is constant

Last Answer : Answer: C

The thermal efficiency of a diesel cycle having fixed compression ratio with increase in cut-off ratio will a. increase b. decrease c. independent d. increase or decrease depending upon other factors

Description : The thermal efficiency of a diesel cycle having fixed compression ratio with increase in cut-off ratio will a. increase b. decrease c. independent d. increase or decrease depending upon other factors

Last Answer : ANSWER b. decrease

In a Rankine cycle, with the maximum steam temperature being fixed from metallurgical considerations, as the boiler pressure increases (a) The condenser load will increase [IES-1997] (b) The quality of turbine exhaust will decrease (c) The quality of turbine exhaust will increase (d) The quality of turbine exhaust will remain unchanged

Description : In a Rankine cycle, with the maximum steam temperature being fixed from metallurgical considerations, as the boiler pressure increases (a) The condenser load will increase [IES-1997] (b) The ... The quality of turbine exhaust will increase (d) The quality of turbine exhaust will remain unchanged

Last Answer : (b) The quality of turbine exhaust will decrease 

An isothermal irreversible reaction is being carried out in an ideal tubular flow reactor. The conversion in this case will __________ with decrease in space time. (A) Increase (B) Increase exponentially (C) Decrease (D) Remain unchanged

Description : An isothermal irreversible reaction is being carried out in an ideal tubular flow reactor. The conversion in this case will __________ with decrease in space time. (A) Increase (B) Increase exponentially (C) Decrease (D) Remain unchanged

Last Answer : (C) Decrease

According to Avogadro’s Hypothesis  (a) the molecular weights of all the perfect gases occupy the same volume under same conditions of pressure and temperature  (b) the sum of partial pressure of mixture of two gases is sum of the two  (c) product of the gas constant and the molecular weight of an ideal gas is constant  (d) gases have two values of specific heat  (e) all systems can be regarded as closed systems.

Description : According to Avogadro's Hypothesis  (a) the molecular weights of all the perfect gases occupy the same volume under same conditions of pressure and temperature  (b) the sum of partial pressure of ... gases have two values of specific heat  (e) all systems can be regarded as closed systems.

Last Answer : Answer : a

Which one is the correct relation between energy efficiency ratio (EER) and coefficient of performance (COP)?  A. EER = 2.34 COP  B. EER = 3.24 COP  C. EER = 3.42 COP  D. EER = 4.23 COP

Description : Which one is the correct relation between energy efficiency ratio (EER) and coefficient of performance (COP)?  A. EER = 2.34 COP  B. EER = 3.24 COP  C. EER = 3.42 COP  D. EER = 4.23 COP

Last Answer : EER = 3.42 COP

What is defined as the ratio of the net electrical power output to the rate of fuel energy input?  A. Combustion efficiency  B. Thermal efficiency  C. Overall efficiency  D. Furnace efficiency

Description : What is defined as the ratio of the net electrical power output to the rate of fuel energy input?  A. Combustion efficiency  B. Thermal efficiency  C. Overall efficiency  D. Furnace efficiency

Last Answer : Overall efficiency

What is the ratio of the useful heat extracted to heating value?  A. Combustion efficiency  B. Phase efficiency  C. Heat efficiency  D. Work efficiency

Description : What is the ratio of the useful heat extracted to heating value?  A. Combustion efficiency  B. Phase efficiency  C. Heat efficiency  D. Work efficiency

Last Answer : Combustion efficiency

Thermal efficiency is the ratio of:  A. Network input to total heat input  B. Network output to total heat output  C. Network output to total heat input  D. Network input to total heat output

Description : Thermal efficiency is the ratio of:  A. Network input to total heat input  B. Network output to total heat output  C. Network output to total heat input  D. Network input to total heat output

Last Answer : Network output to total heat input

Which of the following statements is TRUE for an ideal gas, but not for a real gas?  A. PV = nRT  B. An increase in temperature causes an increase in the kinetic energy of the gas  C. The total volume of molecules on a gas is nearly the same as the volume of the gas as a whole  D. No attractive forces exists between the molecule of a gas

Description : Which of the following statements is TRUE for an ideal gas, but not for a real gas?  A. PV = nRT  B. An increase in temperature causes an increase in the kinetic energy of the gas  C. The ... same as the volume of the gas as a whole  D. No attractive forces exists between the molecule of a gas

Last Answer : PV = nRT

In β-decay of radioactive material, the ratio of neutron to proton (A) Increases (B) Remain same (C) Decreases (D) Is unpredictable; may increase or decrease

Description : In β-decay of radioactive material, the ratio of neutron to proton (A) Increases (B) Remain same (C) Decreases (D) Is unpredictable; may increase or decrease

Last Answer : (C) Decreases

The molecular number density of an ideal gas at standard temperature and pressure in cm3  a. Froude number  b. Loschmidt number  c. Mach number  d. Reynold number

Description : The molecular number density of an ideal gas at standard temperature and pressure in cm3  a. Froude number  b. Loschmidt number  c. Mach number  d. Reynold number

Last Answer : Loschmidt number