A Carnot cycle consists of the following steps: (A) Two isothermal and two isentropic (B) Two isobaric and two isothermal (C) Two isochoric and two isobaric (D) Two isothermals and two isochoric

A Carnot cycle consists of the following steps:
(A) Two isothermal and two isentropic
(B) Two isobaric and two isothermal
(C) Two isochoric and two isobaric
(D) Two isothermals and two isochoric
by

1 Answer

Answer :

A) Two isothermal and two isentropic
by

Related questions

Rankine cycle comprises of two isothermal and two __________ processes. (A) Isobaric (B) Polytropic (C) Isentropic (D) None of these

Description : Rankine cycle comprises of two isothermal and two __________ processes. (A) Isobaric (B) Polytropic (C) Isentropic (D) None of these

Last Answer : (D) None of these

A process during which entropy remains constant is called ______ process  A. Isometric  B. Isochoric  C. Isobaric  D. Isentropic

Description : A process during which entropy remains constant is called ______ process  A. Isometric  B. Isochoric  C. Isobaric  D. Isentropic

Last Answer : Isentropic

During which of the following process does heat rejection takes place in Carnot cycle?  A. Isothermal expansion  B. Isentropic expansion  C. Isothermal compression  D. Isentropic compression

Description : During which of the following process does heat rejection takes place in Carnot cycle?  A. Isothermal expansion  B. Isentropic expansion  C. Isothermal compression  D. Isentropic compression

Last Answer : Answer: C

An approximately __________ process exemplifies the flow of a gas through a very long pipe of uniform cross-section. (A) Adiabatic (B) Isothermal (C) Isentropic (D) Isochoric

Description : An approximately __________ process exemplifies the flow of a gas through a very long pipe of uniform cross-section. (A) Adiabatic (B) Isothermal (C) Isentropic (D) Isochoric

Last Answer : (B) Isothermal

Change of state namely evaporation condensation, freezing and melting is an __________ process. (A) Isothermal (B) Adiabatic (C) Isobaric (D) Isochoric

Description : Change of state namely evaporation condensation, freezing and melting is an __________ process. (A) Isothermal (B) Adiabatic (C) Isobaric (D) Isochoric

Last Answer : (A) Isothermal

Heating of water under atmospheric pressure is an __________ process. (A) Isochoric (B) Isobaric (C) Adiabatic (D) Isothermal

Description : Heating of water under atmospheric pressure is an __________ process. (A) Isochoric (B) Isobaric (C) Adiabatic (D) Isothermal

Last Answer : (B) Isobaric

PVγ = Constant (where, γ = Cp/Cv) is valid for a/an __________ process. (A) Isothermal (B) Isentropic (C) Isobaric (D) Adiabatic

Description : PVγ = Constant (where, γ = Cp/Cv) is valid for a/an __________ process. (A) Isothermal (B) Isentropic (C) Isobaric (D) Adiabatic

Last Answer : (D) Adiabatic

In the equation, PVn = Constant, if the value of n = 0, then it represents a reversible __________ process. (A) Isobaric (B) Isothermal (C) Isentropic (D) Isometric

Description : In the equation, PVn = Constant, if the value of n = 0, then it represents a reversible __________ process. (A) Isobaric (B) Isothermal (C) Isentropic (D) Isometric

Last Answer : (A) Isobaric

The propagation of sound waves in a gas involves – (1) Adiabatic compression and rarefaction (2) Isothermal compression and rarefaction (3) Isochoric compression and rarefaction (4) Isobaric compression and rarefaction

Description : The propagation of sound waves in a gas involves – (1) Adiabatic compression and rarefaction (2) Isothermal compression and rarefaction (3) Isochoric compression and rarefaction (4) Isobaric compression and rarefaction

Last Answer : (1) Adiabatic compression and rarefaction Explanation: Sound is a mechanical wave that is an oscillation of pressure transmitted through a solid, liquid, or gas, composed of frequencies within the ... . Through solids, however, it can be transmitted as both longitudinal waves and transverse waves.

The propagation of sound waves in a gas involves – (1) Adiabatic compression and rarefaction (2) Isothermal compression and rarefaction (3) Isochoric compression and rarefaction (4) Isobaric compression and rarefaction

Description : The propagation of sound waves in a gas involves – (1) Adiabatic compression and rarefaction (2) Isothermal compression and rarefaction (3) Isochoric compression and rarefaction (4) Isobaric compression and rarefaction

Last Answer : (1) Adiabatic compression and rarefaction Explanation: Sound is a mechanical wave that is an oscillation of pressure transmitted through a solid, liquid, or gas, composed of frequencies within ... is transmitted through gases, plasma, and liquids as longitudinal waves, also called compression waves.

In __________ process, there is an increase in entropy with no degradation of energy. (A) Isothermal expansion (B) Isochoric heat addition (C) Polytropic expansion (D) Isobaric heat addition

Description : In __________ process, there is an increase in entropy with no degradation of energy. (A) Isothermal expansion (B) Isochoric heat addition (C) Polytropic expansion (D) Isobaric heat addition

Last Answer : (A) Isothermal expansion

Most cooking activities involve _________ process.  a. Isochoric  b. Isothermal  c. Isobaric  d. Isovolumic

Description : Most cooking activities involve _________ process.  a. Isochoric  b. Isothermal  c. Isobaric  d. Isovolumic

Last Answer : Isobaric

What is a process during which the specific volume remains constant?  A. Isobaric process  B. Isothermal process  C. Isochoric or isometric process  D. Isovolumetric process

Description : What is a process during which the specific volume remains constant?  A. Isobaric process  B. Isothermal process  C. Isochoric or isometric process  D. Isovolumetric process

Last Answer : Isochoric or isometric process

What is a process during which the pressure remains constant?  A. Isobaric process  B. Isothermal process  C. Isochoric process  D. Isometric process

Description : What is a process during which the pressure remains constant?  A. Isobaric process  B. Isothermal process  C. Isochoric process  D. Isometric process

Last Answer : Isobaric process

What is a process during which the temperature remains constant?  A. Isobaric process  B. Isothermal process  C. Isochoric process  D. Isometric process

Description : What is a process during which the temperature remains constant?  A. Isobaric process  B. Isothermal process  C. Isochoric process  D. Isometric process

Last Answer : Isothermal process

The propagation of sound waves in a gas involves (1) adiabatic compression and rarefaction (2) isothermal compression and rarefaction (3) isochoric compression and rarefaction (4) isobaric compression and rarefaction

Description : The propagation of sound waves in a gas involves (1) adiabatic compression and rarefaction (2) isothermal compression and rarefaction (3) isochoric compression and rarefaction (4) isobaric compression and rarefaction

Last Answer : adiabatic compression and rarefaction

Represent Isobaric, Isochoric, Isothermal, Adiabatic process on P-V and T-S diagram.

Description : Represent Isobaric, Isochoric, Isothermal, Adiabatic process on P-V and T-S diagram.

Last Answer : Isobaric process Isothermal process Isochoric process Adiabatic process:

Another name of reversible adiabatic process  a. Isentropic Process  b. Isometric Process  c. Isobaric Process  d. Isothermal Process

Description : Another name of reversible adiabatic process  a. Isentropic Process  b. Isometric Process  c. Isobaric Process  d. Isothermal Process

Last Answer : Isentropic Process

Gas turbine cycle consists of  (a) two isothermals and two isentropics  (b) two isentropics and two constant volumes  (c) two isentropics, one constant volume and one constant pressure  (d) two isentropics and two constant pressures  (e) none of the above.

Description : Gas turbine cycle consists of  (a) two isothermals and two isentropics  (b) two isentropics and two constant volumes  (c) two isentropics, one constant volume and one constant pressure  (d) two isentropics and two constant pressures  (e) none of the above.

Last Answer : Answer : d

Brayton cycle consists’ of following four processes  (a) two isothermals and two isentropics  (b) two isentropics and two constant volumes  (c) two isentropics, one constant volume and one constant pressure  (d) two isentropics and two constant pres-sures  (e) none of the above.

Description : Brayton cycle consists’ of following four processes  (a) two isothermals and two isentropics  (b) two isentropics and two constant volumes  (c) two isentropics, one constant volume and one constant pressure  (d) two isentropics and two constant pres-sures  (e) none of the above.

Last Answer : Answer : d

Diesel cycle consists of following four processes  (a) two isothermals and two isentropics  (b) two isentropics, and two constant volumes.  (c) two isentropics, one constant volume and one constant pressure  (d) two isentropics and two constant pressures  (e) none of the above.

Description : Diesel cycle consists of following four processes  (a) two isothermals and two isentropics  (b) two isentropics, and two constant volumes.  (c) two isentropics, one constant volume and one constant pressure  (d) two isentropics and two constant pressures  (e) none of the above.

Last Answer : Answer : c

Otto cycle consists of following four processes  (a) two isothermals and two isentropics  (b) two isentropics and two constant volumes  (c) two isentropics, one constant volume and one constant pressure  (d) two isentropics and two constant pres-sures  (e) none of the above.

Description : Otto cycle consists of following four processes  (a) two isothermals and two isentropics  (b) two isentropics and two constant volumes  (c) two isentropics, one constant volume and one constant pressure  (d) two isentropics and two constant pres-sures  (e) none of the above.

Last Answer : Answer : b

A cycle consisting of one constant pressure, one constant volume and two isentropic processes is known as  A.Carnot cycle  B.Stirling cycle  C.Otto cycle  D.Diesel cycle

Description : A cycle consisting of one constant pressure, one constant volume and two isentropic processes is known as  A.Carnot cycle  B.Stirling cycle  C.Otto cycle  D.Diesel cycle

Last Answer : Answer: D

A cycle tyre bursts suddenly. This represents an – (1) Isothermal process (2) Adiabatic process (3) Isochoric process (4) Isoboric process

Description : A cycle tyre bursts suddenly. This represents an – (1) Isothermal process (2) Adiabatic process (3) Isochoric process (4) Isoboric process

Last Answer : (2) Adiabatic process Explanation: When a tyre bursts suddenly energy is not immediately transferred between the system and the surrounding. So the process is adiabatic. There sudden expansion of its air ... tyre is cooled. In adiabatic process, heat neither enters the system nor leaves the system.

A cycle tyre bursts suddenly. This represents an : (1) Isothermal process (2) Adiabatic process (3) Isochoric process (4) Isoboric process

Description : A cycle tyre bursts suddenly. This represents an : (1) Isothermal process (2) Adiabatic process (3) Isochoric process (4) Isoboric process

Last Answer : Adiabatic process

In the equation, PVn = constant, if the value of n is in between 1 and y (i.e. Cp/Cv), then it represents a reversible __________ process. (A) Isometric (B) Polytropic (C) Isentropic (D) Isobaric

Description : In the equation, PVn = constant, if the value of n is in between 1 and y (i.e. Cp/Cv), then it represents a reversible __________ process. (A) Isometric (B) Polytropic (C) Isentropic (D) Isobaric

Last Answer : (B) Polytropic

Name the state variables that remain constant in isobaric and isochoric process.

Description : Name the state variables that remain constant in isobaric and isochoric process.

Last Answer : Ans. Pressure and Volume .

The boiling of water into steam in an open container is an example of a/an _________ process.  a. adiabatic  b. isochoric  c. isobaric  d. zero work

Description : The boiling of water into steam in an open container is an example of a/an _________ process.  a. adiabatic  b. isochoric  c. isobaric  d. zero work

Last Answer : isobaric

No volume changes occur during this type of process  a. Isobaric process  b. Isomillimetric process  c. Isocaloric process  d. Isochoric process

Description : No volume changes occur during this type of process  a. Isobaric process  b. Isomillimetric process  c. Isocaloric process  d. Isochoric process

Last Answer : Isochoric process

An adiabatic process in which there is no change in system enthalpy but for which there is a significant decrease in pressure is called _____.  A. Isochoric process  B. Isobaric process  C. Throttling process  D. Quasistatic process

Description : An adiabatic process in which there is no change in system enthalpy but for which there is a significant decrease in pressure is called _____.  A. Isochoric process  B. Isobaric process  C. Throttling process  D. Quasistatic process

Last Answer : Throttling process

The most efficient cycle that can operate between two constant temperature reservoir is the _________.  a. Otto Cycle  b. Lazare Cycle  c. Isothermal Cycle  d. Carnot Cycle

Description : The most efficient cycle that can operate between two constant temperature reservoir is the _________.  a. Otto Cycle  b. Lazare Cycle  c. Isothermal Cycle  d. Carnot Cycle

Last Answer : Carnot Cycle

The Carnot cycle is composed of ______ processes.  A. One isothermal and one adiabatic  B. One isothermal and two adiabatic  C. Two isothermal and one adiabatic  D. Two isothermal and two adiabatic

Description : The Carnot cycle is composed of ______ processes.  A. One isothermal and one adiabatic  B. One isothermal and two adiabatic  C. Two isothermal and one adiabatic  D. Two isothermal and two adiabatic

Last Answer : Two isothermal and two adiabatic

It is a process during which the pressure remains constant  a. Adiabatic  b. Isentropic  c. Isobaric  d. Isotropic

Description : It is a process during which the pressure remains constant  a. Adiabatic  b. Isentropic  c. Isobaric  d. Isotropic

Last Answer : Isobaric

A ______ is a flow in which the gas flow is adiabatic and frictionless and entropy change is zero.  A. Isentropic flow  B. Isobaric flow  C. Steady flow  D. Uniform flow

Description : A ______ is a flow in which the gas flow is adiabatic and frictionless and entropy change is zero.  A. Isentropic flow  B. Isobaric flow  C. Steady flow  D. Uniform flow

Last Answer : Isentropic flow

The dual combustion cycle consists of one constant pressure, two constant volume and two isentropic processes.  A. Agree  B. Disagree

Description : The dual combustion cycle consists of one constant pressure, two constant volume and two isentropic processes.  A. Agree  B. Disagree

Last Answer : Answer: A

PVy = constant, holds good for an isentropic process, which is (A) Reversible and isothermal (B) Isothermal and irreversible (C) Reversible and adiabatic (D) Adiabatic and irreversible

Description : PVy = constant, holds good for an isentropic process, which is (A) Reversible and isothermal (B) Isothermal and irreversible (C) Reversible and adiabatic (D) Adiabatic and irreversible

Last Answer : C) Reversible and adiabatic

In the equation, PVn = constant, if the value of n = ± ∞, then it represents a reversible __________ process. (A) Adiabatic (B) Isometric (C) Isentropic (D) Isothermal

Description : In the equation, PVn = constant, if the value of n = ± ∞, then it represents a reversible __________ process. (A) Adiabatic (B) Isometric (C) Isentropic (D) Isothermal

Last Answer : (B) Isometric

Maximum work that could be secured by expanding the gas over a given pressure range is the __________ work. (A) Isothermal (B) Adiabatic (C) Isentropic (D) None of these

Description : Maximum work that could be secured by expanding the gas over a given pressure range is the __________ work. (A) Isothermal (B) Adiabatic (C) Isentropic (D) None of these

Last Answer : (A) Isothermal

In the equation PVn = constant, if the value of n = y = Cp/Cv, then it represents a reversible __________ process. (A) Isothermal (B) Adiabatic (C) Isentropic (D) Polytropic

Description : In the equation PVn = constant, if the value of n = y = Cp/Cv, then it represents a reversible __________ process. (A) Isothermal (B) Adiabatic (C) Isentropic (D) Polytropic

Last Answer : (C) Isentropic

The expression for the work done for a reversible polytropic process can be used to obtain the expression for work done for all processes, except reversible __________ process. (A) Isobaric (B) Isothermal (C) Adiabatic (D) None of these

Description : The expression for the work done for a reversible polytropic process can be used to obtain the expression for work done for all processes, except reversible __________ process. (A) Isobaric (B) Isothermal (C) Adiabatic (D) None of these

Last Answer : (B) Isothermal

In the equation, PVn = constant, if the value of n = 1, then it represents a reversible __________ process. (A) Isothermal (B) Isobaric (C) Polytropic (D) Adiabatic

Description : In the equation, PVn = constant, if the value of n = 1, then it represents a reversible __________ process. (A) Isothermal (B) Isobaric (C) Polytropic (D) Adiabatic

Last Answer : (A) Isothermal

Which of the following non-flow reversible compression processes require maximum work? (A) Adiabatic process (B) Isothermal process (C) Isobaric process (D) All require same work

Description : Which of the following non-flow reversible compression processes require maximum work? (A) Adiabatic process (B) Isothermal process (C) Isobaric process (D) All require same work

Last Answer : (A) Adiabatic process

What is another term used for isometric processes?  a. Isochoric process  b. Iolytropic process  c. Isothermal process  d. Reversible process

Description : What is another term used for isometric processes?  a. Isochoric process  b. Iolytropic process  c. Isothermal process  d. Reversible process

Last Answer : Isochoric process

Work done by a/an __________ process is determined by ∫p. dv (A) Adiabatic (B) Quasi-static (C) Isothermal (D) Isentropic

Description : Work done by a/an __________ process is determined by ∫p. dv (A) Adiabatic (B) Quasi-static (C) Isothermal (D) Isentropic

Last Answer : (B) Quasi-static

Occurring at fixed temperature  a. isentropic  b. Adiabatic  c. Isothermal  d. polytropic

Description : Occurring at fixed temperature  a. isentropic  b. Adiabatic  c. Isothermal  d. polytropic

Last Answer : Isothermal

One for which no heat is gained or lost  a. Isentropic  b. Adiabatic  c. Isothermal  d. Polytropic

Description : One for which no heat is gained or lost  a. Isentropic  b. Adiabatic  c. Isothermal  d. Polytropic

Last Answer : Adiabatic

A thermodynamic process in which entropy is conserved  a. isentropic  b. adiabatic  c. isothermal  d. polytropic

Description : A thermodynamic process in which entropy is conserved  a. isentropic  b. adiabatic  c. isothermal  d. polytropic

Last Answer : isentropic

The isothermal and isentropic processes are reversible non-flow processes.  A. Agree  B. Disagree

Description : The isothermal and isentropic processes are reversible non-flow processes.  A. Agree  B. Disagree

Last Answer : Answer: A

The index of compression n tends to reach ratio of specific heats y when  (a) flow is uniform and steady  (b) process is isentropic  (c) process is isothermal  (d) process is isentropic and specific heat does not change with temperature  (e) process is isentropic and specific heat changes with temperature.

Description : The index of compression n tends to reach ratio of specific heats y when  (a) flow is uniform and steady  (b) process is isentropic  (c) process is isothermal  (d) process ... specific heat does not change with temperature  (e) process is isentropic and specific heat changes with temperature.

Last Answer : Answer : d

Differentiate between isothermal and isentropic processes

Description : Differentiate between isothermal and isentropic processes

Last Answer : Isothermal Vs Isentropic