Description : A cycle tyre bursts suddenly. This represents an – (1) Isothermal process (2) Adiabatic process (3) Isochoric process (4) Isoboric process
Last Answer : (2) Adiabatic process Explanation: When a tyre bursts suddenly energy is not immediately transferred between the system and the surrounding. So the process is adiabatic. There sudden expansion of its air ... tyre is cooled. In adiabatic process, heat neither enters the system nor leaves the system.
Description : The propagation of sound waves in a gas involves – (1) Adiabatic compression and rarefaction (2) Isothermal compression and rarefaction (3) Isochoric compression and rarefaction (4) Isobaric compression and rarefaction
Last Answer : (1) Adiabatic compression and rarefaction Explanation: Sound is a mechanical wave that is an oscillation of pressure transmitted through a solid, liquid, or gas, composed of frequencies within the ... . Through solids, however, it can be transmitted as both longitudinal waves and transverse waves.
Last Answer : (1) Adiabatic compression and rarefaction Explanation: Sound is a mechanical wave that is an oscillation of pressure transmitted through a solid, liquid, or gas, composed of frequencies within ... is transmitted through gases, plasma, and liquids as longitudinal waves, also called compression waves.
Description : The propagation of sound waves in a gas involves (1) adiabatic compression and rarefaction (2) isothermal compression and rarefaction (3) isochoric compression and rarefaction (4) isobaric compression and rarefaction
Last Answer : adiabatic compression and rarefaction
Description : Change of state namely evaporation condensation, freezing and melting is an __________ process. (A) Isothermal (B) Adiabatic (C) Isobaric (D) Isochoric
Last Answer : (A) Isothermal
Description : Heating of water under atmospheric pressure is an __________ process. (A) Isochoric (B) Isobaric (C) Adiabatic (D) Isothermal
Last Answer : (B) Isobaric
Description : An approximately __________ process exemplifies the flow of a gas through a very long pipe of uniform cross-section. (A) Adiabatic (B) Isothermal (C) Isentropic (D) Isochoric
Last Answer : (B) Isothermal
Description : Represent Isobaric, Isochoric, Isothermal, Adiabatic process on P-V and T-S diagram.
Last Answer : Isobaric process Isothermal process Isochoric process Adiabatic process:
Description : A Carnot cycle consists of the following steps: (A) Two isothermal and two isentropic (B) Two isobaric and two isothermal (C) Two isochoric and two isobaric (D) Two isothermals and two isochoric
Last Answer : A) Two isothermal and two isentropic
Description : In the equation, PVn = constant, if the value of n = ± ∞, then it represents a reversible __________ process. (A) Adiabatic (B) Isometric (C) Isentropic (D) Isothermal
Last Answer : (B) Isometric
Description : In the equation PVn = constant, if the value of n = y = Cp/Cv, then it represents a reversible __________ process. (A) Isothermal (B) Adiabatic (C) Isentropic (D) Polytropic
Last Answer : (C) Isentropic
Description : In the equation, PVn = constant, if the value of n = 1, then it represents a reversible __________ process. (A) Isothermal (B) Isobaric (C) Polytropic (D) Adiabatic
Description : A cycle type bursts suddenly. This represent an
Last Answer : Isothermal Process
Description : In __________ process, there is an increase in entropy with no degradation of energy. (A) Isothermal expansion (B) Isochoric heat addition (C) Polytropic expansion (D) Isobaric heat addition
Last Answer : (A) Isothermal expansion
Description : What is another term used for isometric processes? a. Isochoric process b. Iolytropic process c. Isothermal process d. Reversible process
Last Answer : Isochoric process
Description : Most cooking activities involve _________ process. a. Isochoric b. Isothermal c. Isobaric d. Isovolumic
Last Answer : Isobaric
Description : What is a process during which the specific volume remains constant? A. Isobaric process B. Isothermal process C. Isochoric or isometric process D. Isovolumetric process
Last Answer : Isochoric or isometric process
Description : What is a process during which the pressure remains constant? A. Isobaric process B. Isothermal process C. Isochoric process D. Isometric process
Last Answer : Isobaric process
Description : What is a process during which the temperature remains constant? A. Isobaric process B. Isothermal process C. Isochoric process D. Isometric process
Last Answer : Isothermal process
Description : The boiling of water into steam in an open container is an example of a/an _________ process. a. adiabatic b. isochoric c. isobaric d. zero work
Last Answer : isobaric
Description : An adiabatic process in which there is no change in system enthalpy but for which there is a significant decrease in pressure is called _____. A. Isochoric process B. Isobaric process C. Throttling process D. Quasistatic process
Last Answer : Throttling process
Description : Blowing Air with open pipe is an example of – (1) isothermal process (2) isochroric process (3) Isobaric process (4) Adiabatic process
Last Answer : (3) Isobaric process Explanation: When air is suddenly exhaled out into a larger volume through the narrow opening, air undergo adiabatic expansion. So blowing air is an adiabatic process. But since it is open pipe, the pressure inside and pressure outside remains same.
Description : Blowing Air with open pipe is an example of : (1) Isothermal process (2) Isochroric process (3) Isobaric process (4) Adiabatic process
Description : The Carnot cycle is composed of ______ processes. A. One isothermal and one adiabatic B. One isothermal and two adiabatic C. Two isothermal and one adiabatic D. Two isothermal and two adiabatic
Last Answer : Two isothermal and two adiabatic
Description : The hammer blow in pipes occurs when (A) There is excessive leakage in the pipe (B) The pipe bursts under high pressure of fluid (C) The flow of fluid through the pipe is suddenly brought to ... valve (D) The flow of fluid through the pipe is gradually brought to rest by closing of the valve
Last Answer : Answer: Option C
Description : In a single stage reciprocating air compressor, the work done on air to compressor is from suction pressure to delivery pressure will be minimum when the compression is A. Isothermal process B. Adiabatic process C. Polytropic process D. Constant pressure process.
Last Answer : ANSWER : A
Description : When a gas in a vessel expands, its internal energy decreases. The process involved is (A) Reversible (B) Irreversible (C) Isothermal (D) Adiabatic
Last Answer : (A) Reversible
Description : In polytropic process (PV n = constant), if n = 1; it means a/an __________ process. (A) Adiabatic (B) Reversible (C) Isothermal (D) None of these
Last Answer : (C) Isothermal
Description : PVγ = Constant (where, γ = Cp/Cv) is valid for a/an __________ process. (A) Isothermal (B) Isentropic (C) Isobaric (D) Adiabatic
Last Answer : (D) Adiabatic
Description : PVy = constant, holds good for an isentropic process, which is (A) Reversible and isothermal (B) Isothermal and irreversible (C) Reversible and adiabatic (D) Adiabatic and irreversible
Last Answer : C) Reversible and adiabatic
Description : In case of an __________ process, the temperature of the system increases. (A) Isothermal compression (B) Isothermal expansion (C) Adiabatic expansion (D) Adiabatic compression
Last Answer : (D) Adiabatic compression
Description : The expression for the work done for a reversible polytropic process can be used to obtain the expression for work done for all processes, except reversible __________ process. (A) Isobaric (B) Isothermal (C) Adiabatic (D) None of these
Description : Melting of ice is an example of an __________ process. (A) Adiabatic (B) Isothermal (C) Isometric (D) None of these
Description : Which of the following non-flow reversible compression processes require maximum work? (A) Adiabatic process (B) Isothermal process (C) Isobaric process (D) All require same work
Last Answer : (A) Adiabatic process
Description : Sound waves propagation in air exemplifies an __________ process. (A) Adiabatic (B) Isothermal (C) Isometric (D) None of these
Last Answer : (A) Adiabatic
Description : Work done by a/an __________ process is determined by ∫p. dv (A) Adiabatic (B) Quasi-static (C) Isothermal (D) Isentropic
Last Answer : (B) Quasi-static
Description : A thermodynamic process in which entropy is conserved a. isentropic b. adiabatic c. isothermal d. polytropic
Last Answer : isentropic
Description : When the expansion of compression of gas takes place without transfer of heat to or from the gas the process is called a. reversible b. adiabatic c. polytropic d. isothermal
Last Answer : adiabatic
Description : When the expansion of compression of gas takes place without transfer of heat or from the gas the process is called; a. Isometric process b. Isothermal process c. Isobaric process d. Adiabatic process
Last Answer : Adiabatic process
Description : Another name of reversible adiabatic process a. Isentropic Process b. Isometric Process c. Isobaric Process d. Isothermal Process
Last Answer : Isentropic Process
Description : A process, in which the temperature of the working substance remains constant during its expansion or compression, is called A. isothermal process B. hyperbolic process C. adiabatic process D. polytropic process
Last Answer : Answer: A
Description : If the value of n = 0 in the equation pvn = C, then the process is called A. constant volume process B. adiabatic process C. constant pressure process D. isothermal process
Last Answer : Answer: C
Description : Which of the following processes is irreversible process (a) isothermal (b) adiabatic (c) throttling (d) all of the above (e) none of the above.
Last Answer : Answer : c
Description : The value of n = 1 in the polytropic process indicates it to be (a) reversible process (b) isothermal process (c) adiabatic process (d) irreversible process (e) free expansion process.
Last Answer : Answer : b
Description : Define isothermal and Adiabatic process.
Last Answer : Isothermal process:- The process in which volume of a gas changes keeping its temperature constant is called isothermal change. Adiabatic process:- The process in which volume of a gas changes with change in temperature is called Adiabatic change.
Description : A car is travelling at 90 km/hour on a rough road where the coefficient of friction between the road and the tyre is 0.5. The distance the car will skid before stopping when the brakes are jammed suddenly would be a.127.4 m b.95.55 m c.63.7 m d.31.85 m e.90 m
Last Answer : c. 63.7 m
Description : The energy equation, E + (p/ρ) + (V 2 /2g) + gZ = constant (E = internal energy/mass), is applicable to (A) Perfect gases only (B) Isothermal flow of gases (C) Adiabatic unsteady flow of gases (D) All compressible fluids
Last Answer : (D) All compressible fluids
Description : In a/an __________ reactor, there is exchange of heat with the surroundings with sizeable temperature variation. (A) Adiabatic (B) Isothermal (C) Non-adiabatic (D) None of these
Last Answer : (C) Non-adiabatic
Description : In a P-V diagram (for an ideal gas), an isothermal curve will coincide within adiabatic curve (through a point), when (A) Cp < Cv (B) Cp = Cv (C) Cp > Cv (D) C ≥ Cv
Last Answer : (B) Cp = Cv
Description : The difference between isothermal compressibility and adiabatic compressibility for an ideal gas is (A) 0 (B) +ve (C) -ve (D) ∞
Last Answer : (B) +ve