An approximately __________ process exemplifies the flow of a gas through a very long pipe of uniform cross-section. (A) Adiabatic (B) Isothermal (C) Isentropic (D) Isochoric

An approximately __________ process exemplifies the flow of a gas through a very long pipe of uniform cross-section.
(A) Adiabatic
(B) Isothermal
(C) Isentropic
(D) Isochoric
by

1 Answer

Answer :

(B) Isothermal
by

Related questions

Change of state namely evaporation condensation, freezing and melting is an __________ process. (A) Isothermal (B) Adiabatic (C) Isobaric (D) Isochoric

Description : Change of state namely evaporation condensation, freezing and melting is an __________ process. (A) Isothermal (B) Adiabatic (C) Isobaric (D) Isochoric

Last Answer : (A) Isothermal

Heating of water under atmospheric pressure is an __________ process. (A) Isochoric (B) Isobaric (C) Adiabatic (D) Isothermal

Description : Heating of water under atmospheric pressure is an __________ process. (A) Isochoric (B) Isobaric (C) Adiabatic (D) Isothermal

Last Answer : (B) Isobaric

Maximum work that could be secured by expanding the gas over a given pressure range is the __________ work. (A) Isothermal (B) Adiabatic (C) Isentropic (D) None of these

Description : Maximum work that could be secured by expanding the gas over a given pressure range is the __________ work. (A) Isothermal (B) Adiabatic (C) Isentropic (D) None of these

Last Answer : (A) Isothermal

PVγ = Constant (where, γ = Cp/Cv) is valid for a/an __________ process. (A) Isothermal (B) Isentropic (C) Isobaric (D) Adiabatic

Description : PVγ = Constant (where, γ = Cp/Cv) is valid for a/an __________ process. (A) Isothermal (B) Isentropic (C) Isobaric (D) Adiabatic

Last Answer : (D) Adiabatic

In the equation, PVn = constant, if the value of n = ± ∞, then it represents a reversible __________ process. (A) Adiabatic (B) Isometric (C) Isentropic (D) Isothermal

Description : In the equation, PVn = constant, if the value of n = ± ∞, then it represents a reversible __________ process. (A) Adiabatic (B) Isometric (C) Isentropic (D) Isothermal

Last Answer : (B) Isometric

In the equation PVn = constant, if the value of n = y = Cp/Cv, then it represents a reversible __________ process. (A) Isothermal (B) Adiabatic (C) Isentropic (D) Polytropic

Description : In the equation PVn = constant, if the value of n = y = Cp/Cv, then it represents a reversible __________ process. (A) Isothermal (B) Adiabatic (C) Isentropic (D) Polytropic

Last Answer : (C) Isentropic

A Carnot cycle consists of the following steps: (A) Two isothermal and two isentropic (B) Two isobaric and two isothermal (C) Two isochoric and two isobaric (D) Two isothermals and two isochoric

Description : A Carnot cycle consists of the following steps: (A) Two isothermal and two isentropic (B) Two isobaric and two isothermal (C) Two isochoric and two isobaric (D) Two isothermals and two isochoric

Last Answer : A) Two isothermal and two isentropic

Work done by a/an __________ process is determined by ∫p. dv (A) Adiabatic (B) Quasi-static (C) Isothermal (D) Isentropic

Description : Work done by a/an __________ process is determined by ∫p. dv (A) Adiabatic (B) Quasi-static (C) Isothermal (D) Isentropic

Last Answer : (B) Quasi-static

The index of compression n tends to reach ratio of specific heats y when  (a) flow is uniform and steady  (b) process is isentropic  (c) process is isothermal  (d) process is isentropic and specific heat does not change with temperature  (e) process is isentropic and specific heat changes with temperature.

Description : The index of compression n tends to reach ratio of specific heats y when  (a) flow is uniform and steady  (b) process is isentropic  (c) process is isothermal  (d) process ... specific heat does not change with temperature  (e) process is isentropic and specific heat changes with temperature.

Last Answer : Answer : d

PVy = constant, holds good for an isentropic process, which is (A) Reversible and isothermal (B) Isothermal and irreversible (C) Reversible and adiabatic (D) Adiabatic and irreversible

Description : PVy = constant, holds good for an isentropic process, which is (A) Reversible and isothermal (B) Isothermal and irreversible (C) Reversible and adiabatic (D) Adiabatic and irreversible

Last Answer : C) Reversible and adiabatic

The propagation of sound waves in a gas involves – (1) Adiabatic compression and rarefaction (2) Isothermal compression and rarefaction (3) Isochoric compression and rarefaction (4) Isobaric compression and rarefaction

Description : The propagation of sound waves in a gas involves – (1) Adiabatic compression and rarefaction (2) Isothermal compression and rarefaction (3) Isochoric compression and rarefaction (4) Isobaric compression and rarefaction

Last Answer : (1) Adiabatic compression and rarefaction Explanation: Sound is a mechanical wave that is an oscillation of pressure transmitted through a solid, liquid, or gas, composed of frequencies within the ... . Through solids, however, it can be transmitted as both longitudinal waves and transverse waves.

The propagation of sound waves in a gas involves – (1) Adiabatic compression and rarefaction (2) Isothermal compression and rarefaction (3) Isochoric compression and rarefaction (4) Isobaric compression and rarefaction

Description : The propagation of sound waves in a gas involves – (1) Adiabatic compression and rarefaction (2) Isothermal compression and rarefaction (3) Isochoric compression and rarefaction (4) Isobaric compression and rarefaction

Last Answer : (1) Adiabatic compression and rarefaction Explanation: Sound is a mechanical wave that is an oscillation of pressure transmitted through a solid, liquid, or gas, composed of frequencies within ... is transmitted through gases, plasma, and liquids as longitudinal waves, also called compression waves.

The propagation of sound waves in a gas involves (1) adiabatic compression and rarefaction (2) isothermal compression and rarefaction (3) isochoric compression and rarefaction (4) isobaric compression and rarefaction

Description : The propagation of sound waves in a gas involves (1) adiabatic compression and rarefaction (2) isothermal compression and rarefaction (3) isochoric compression and rarefaction (4) isobaric compression and rarefaction

Last Answer : adiabatic compression and rarefaction

A ______ is a flow in which the gas flow is adiabatic and frictionless and entropy change is zero.  A. Isentropic flow  B. Isobaric flow  C. Steady flow  D. Uniform flow

Description : A ______ is a flow in which the gas flow is adiabatic and frictionless and entropy change is zero.  A. Isentropic flow  B. Isobaric flow  C. Steady flow  D. Uniform flow

Last Answer : Isentropic flow

A cycle tyre bursts suddenly. This represents an – (1) Isothermal process (2) Adiabatic process (3) Isochoric process (4) Isoboric process

Description : A cycle tyre bursts suddenly. This represents an – (1) Isothermal process (2) Adiabatic process (3) Isochoric process (4) Isoboric process

Last Answer : (2) Adiabatic process Explanation: When a tyre bursts suddenly energy is not immediately transferred between the system and the surrounding. So the process is adiabatic. There sudden expansion of its air ... tyre is cooled. In adiabatic process, heat neither enters the system nor leaves the system.

A cycle tyre bursts suddenly. This represents an : (1) Isothermal process (2) Adiabatic process (3) Isochoric process (4) Isoboric process

Description : A cycle tyre bursts suddenly. This represents an : (1) Isothermal process (2) Adiabatic process (3) Isochoric process (4) Isoboric process

Last Answer : Adiabatic process

Represent Isobaric, Isochoric, Isothermal, Adiabatic process on P-V and T-S diagram.

Description : Represent Isobaric, Isochoric, Isothermal, Adiabatic process on P-V and T-S diagram.

Last Answer : Isobaric process Isothermal process Isochoric process Adiabatic process:

A thermodynamic process in which entropy is conserved  a. isentropic  b. adiabatic  c. isothermal  d. polytropic

Description : A thermodynamic process in which entropy is conserved  a. isentropic  b. adiabatic  c. isothermal  d. polytropic

Last Answer : isentropic

Another name of reversible adiabatic process  a. Isentropic Process  b. Isometric Process  c. Isobaric Process  d. Isothermal Process

Description : Another name of reversible adiabatic process  a. Isentropic Process  b. Isometric Process  c. Isobaric Process  d. Isothermal Process

Last Answer : Isentropic Process

Occurring at fixed temperature  a. isentropic  b. Adiabatic  c. Isothermal  d. polytropic

Description : Occurring at fixed temperature  a. isentropic  b. Adiabatic  c. Isothermal  d. polytropic

Last Answer : Isothermal

One for which no heat is gained or lost  a. Isentropic  b. Adiabatic  c. Isothermal  d. Polytropic

Description : One for which no heat is gained or lost  a. Isentropic  b. Adiabatic  c. Isothermal  d. Polytropic

Last Answer : Adiabatic

In the equation, PVn = Constant, if the value of n = 0, then it represents a reversible __________ process. (A) Isobaric (B) Isothermal (C) Isentropic (D) Isometric

Description : In the equation, PVn = Constant, if the value of n = 0, then it represents a reversible __________ process. (A) Isobaric (B) Isothermal (C) Isentropic (D) Isometric

Last Answer : (A) Isobaric

In __________ process, there is an increase in entropy with no degradation of energy. (A) Isothermal expansion (B) Isochoric heat addition (C) Polytropic expansion (D) Isobaric heat addition

Description : In __________ process, there is an increase in entropy with no degradation of energy. (A) Isothermal expansion (B) Isochoric heat addition (C) Polytropic expansion (D) Isobaric heat addition

Last Answer : (A) Isothermal expansion

A process during which entropy remains constant is called ______ process  A. Isometric  B. Isochoric  C. Isobaric  D. Isentropic

Description : A process during which entropy remains constant is called ______ process  A. Isometric  B. Isochoric  C. Isobaric  D. Isentropic

Last Answer : Isentropic

Blowing Air with open pipe is an example of – (1) isothermal process (2) isochroric process (3) Isobaric process (4) Adiabatic process

Description : Blowing Air with open pipe is an example of – (1) isothermal process (2) isochroric process (3) Isobaric process (4) Adiabatic process

Last Answer : (3) Isobaric process Explanation: When air is suddenly exhaled out into a larger volume through the narrow opening, air undergo adiabatic expansion. So blowing air is an adiabatic process. But since it is open pipe, the pressure inside and pressure outside remains same.

Blowing Air with open pipe is an example of : (1) Isothermal process (2) Isochroric process (3) Isobaric process (4) Adiabatic process

Description : Blowing Air with open pipe is an example of : (1) Isothermal process (2) Isochroric process (3) Isobaric process (4) Adiabatic process

Last Answer : Isobaric process 

The Bernoulli's equation is based on the assumption that (A) There is no loss of energy of the liquid flowing (B) The velocity of flow is uniform across any cross-section of the pipe (C) No force except gravity acts on the fluid (D) All of the above

Description : The Bernoulli's equation is based on the assumption that (A) There is no loss of energy of the liquid flowing (B) The velocity of flow is uniform across any cross-section of the pipe (C) No force except gravity acts on the fluid (D) All of the above

Last Answer : Answer: Option D

Melting of ice exemplifies a/an (A) Adiabatic process (B) Endothermic reaction (C) Exothermic reaction (D) Process involving a chemical reaction

Description : Melting of ice exemplifies a/an (A) Adiabatic process (B) Endothermic reaction (C) Exothermic reaction (D) Process involving a chemical reaction

Last Answer : (B) Endothermic reaction

Which of the following non-flow reversible compression processes require maximum work? (A) Adiabatic process (B) Isothermal process (C) Isobaric process (D) All require same work

Description : Which of the following non-flow reversible compression processes require maximum work? (A) Adiabatic process (B) Isothermal process (C) Isobaric process (D) All require same work

Last Answer : (A) Adiabatic process

Select the correct practical example of steady non-uniform flow. (A) Motion of water around a ship in a lake (B) Motion of river around bridge piers (C) Steadily decreasing flow through a reducing section (D) Steadily increasing flow through a pipe

Description : Select the correct practical example of steady non-uniform flow. (A) Motion of water around a ship in a lake (B) Motion of river around bridge piers (C) Steadily decreasing flow through a reducing section (D) Steadily increasing flow through a pipe

Last Answer : (C) Steadily decreasing flow through a reducing section

The isothermal and isentropic processes are reversible non-flow processes.  A. Agree  B. Disagree

Description : The isothermal and isentropic processes are reversible non-flow processes.  A. Agree  B. Disagree

Last Answer : Answer: A

The adiabatic throttling process of a perfect gas is one of constant enthalpy (A) In which there is a temperature drop (B) Which is exemplified by a non-steady flow expansion (C) Which can be performed in a pipe with a constriction (D) In which there is an increase in temperature

Description : The adiabatic throttling process of a perfect gas is one of constant enthalpy (A) In which there is a temperature drop (B) Which is exemplified by a non-steady flow expansion (C) Which can be performed in a pipe with a constriction (D) In which there is an increase in temperature

Last Answer : (C) Which can be performed in a pipe with a constriction

he gas law (PV = RT) is true for an __________ change. (A) Isothermal (B) Adiabatic (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : he gas law (PV = RT) is true for an __________ change. (A) Isothermal (B) Adiabatic (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

In polytropic process (PV n = constant), if n = 1; it means a/an __________ process. (A) Adiabatic (B) Reversible (C) Isothermal (D) None of these

Description : In polytropic process (PV n = constant), if n = 1; it means a/an __________ process. (A) Adiabatic (B) Reversible (C) Isothermal (D) None of these

Last Answer : (C) Isothermal

In case of an __________ process, the temperature of the system increases. (A) Isothermal compression (B) Isothermal expansion (C) Adiabatic expansion (D) Adiabatic compression

Description : In case of an __________ process, the temperature of the system increases. (A) Isothermal compression (B) Isothermal expansion (C) Adiabatic expansion (D) Adiabatic compression

Last Answer : (D) Adiabatic compression

The expression for the work done for a reversible polytropic process can be used to obtain the expression for work done for all processes, except reversible __________ process. (A) Isobaric (B) Isothermal (C) Adiabatic (D) None of these

Description : The expression for the work done for a reversible polytropic process can be used to obtain the expression for work done for all processes, except reversible __________ process. (A) Isobaric (B) Isothermal (C) Adiabatic (D) None of these

Last Answer : (B) Isothermal

Melting of ice is an example of an __________ process. (A) Adiabatic (B) Isothermal (C) Isometric (D) None of these

Description : Melting of ice is an example of an __________ process. (A) Adiabatic (B) Isothermal (C) Isometric (D) None of these

Last Answer : (B) Isothermal

In the equation, PVn = constant, if the value of n = 1, then it represents a reversible __________ process. (A) Isothermal (B) Isobaric (C) Polytropic (D) Adiabatic

Description : In the equation, PVn = constant, if the value of n = 1, then it represents a reversible __________ process. (A) Isothermal (B) Isobaric (C) Polytropic (D) Adiabatic

Last Answer : (A) Isothermal

What is another term used for isometric processes?  a. Isochoric process  b. Iolytropic process  c. Isothermal process  d. Reversible process

Description : What is another term used for isometric processes?  a. Isochoric process  b. Iolytropic process  c. Isothermal process  d. Reversible process

Last Answer : Isochoric process

Most cooking activities involve _________ process.  a. Isochoric  b. Isothermal  c. Isobaric  d. Isovolumic

Description : Most cooking activities involve _________ process.  a. Isochoric  b. Isothermal  c. Isobaric  d. Isovolumic

Last Answer : Isobaric

What is a process during which the specific volume remains constant?  A. Isobaric process  B. Isothermal process  C. Isochoric or isometric process  D. Isovolumetric process

Description : What is a process during which the specific volume remains constant?  A. Isobaric process  B. Isothermal process  C. Isochoric or isometric process  D. Isovolumetric process

Last Answer : Isochoric or isometric process

What is a process during which the pressure remains constant?  A. Isobaric process  B. Isothermal process  C. Isochoric process  D. Isometric process

Description : What is a process during which the pressure remains constant?  A. Isobaric process  B. Isothermal process  C. Isochoric process  D. Isometric process

Last Answer : Isobaric process

What is a process during which the temperature remains constant?  A. Isobaric process  B. Isothermal process  C. Isochoric process  D. Isometric process

Description : What is a process during which the temperature remains constant?  A. Isobaric process  B. Isothermal process  C. Isochoric process  D. Isometric process

Last Answer : Isothermal process

The boiling of water into steam in an open container is an example of a/an _________ process.  a. adiabatic  b. isochoric  c. isobaric  d. zero work

Description : The boiling of water into steam in an open container is an example of a/an _________ process.  a. adiabatic  b. isochoric  c. isobaric  d. zero work

Last Answer : isobaric

An adiabatic process in which there is no change in system enthalpy but for which there is a significant decrease in pressure is called _____.  A. Isochoric process  B. Isobaric process  C. Throttling process  D. Quasistatic process

Description : An adiabatic process in which there is no change in system enthalpy but for which there is a significant decrease in pressure is called _____.  A. Isochoric process  B. Isobaric process  C. Throttling process  D. Quasistatic process

Last Answer : Throttling process

Rankine cycle comprises of two isothermal and two __________ processes. (A) Isobaric (B) Polytropic (C) Isentropic (D) None of these

Description : Rankine cycle comprises of two isothermal and two __________ processes. (A) Isobaric (B) Polytropic (C) Isentropic (D) None of these

Last Answer : (D) None of these

When a gas in a vessel expands, its internal energy decreases. The process involved is (A) Reversible (B) Irreversible (C) Isothermal (D) Adiabatic

Description : When a gas in a vessel expands, its internal energy decreases. The process involved is (A) Reversible (B) Irreversible (C) Isothermal (D) Adiabatic

Last Answer : (A) Reversible

In a P-V diagram (for an ideal gas), an isothermal curve will coincide within adiabatic curve (through a point), when (A) Cp < Cv (B) Cp = Cv (C) Cp > Cv (D) C ≥ Cv

Description : In a P-V diagram (for an ideal gas), an isothermal curve will coincide within adiabatic curve (through a point), when (A) Cp < Cv (B) Cp = Cv (C) Cp > Cv (D) C ≥ Cv

Last Answer : (B) Cp = Cv