Air-refrigeration cycle (A) Is the most efficient of all refrigeration cycles (B) Has very low efficiency (C) Requires relatively large quantities of air to achieve a significant amount of refrigeration (D) Both (B) and (C)

Air-refrigeration cycle
(A) Is the most efficient of all refrigeration cycles
(B) Has very low efficiency
(C) Requires relatively large quantities of air to achieve a significant amount of refrigeration
(D) Both (B) and (C)
by

1 Answer

Answer :

(D) Both (B) and (C)
by

Related questions

Out of the following refrigeration cycles, which one has the minimum COP (Co-efficient of performance)? (A) Air cycle (B) Carnot cycle (C) Ordinary vapour compression cycle (D) Vapour compression with a reversible expansion engine

Description : Out of the following refrigeration cycles, which one has the minimum COP (Co-efficient of performance)? (A) Air cycle (B) Carnot cycle (C) Ordinary vapour compression cycle (D) Vapour compression with a reversible expansion engine

Last Answer : A) Air cycle

Out of the following refrigeration cycles, which one has maximum COP? (A) Air cycle (B) Carnot cycle (C) Ordinary vapor compression cycle (D) Vapor compression with a reversible expansion engin

Description : Out of the following refrigeration cycles, which one has maximum COP? (A) Air cycle (B) Carnot cycle (C) Ordinary vapor compression cycle (D) Vapor compression with a reversible expansion engin

Last Answer : (B) Carnot cycle

For same compression ratio and for same heat added  (a) Otto cycle is more efficient than Diesel cycle  (b) Diesel cycle is more efficient than Otto cycle  (c) efficiency depends on other factors  (d) both Otto and Diesel cycles are equally efficient  (e) none of the above.

Description : For same compression ratio and for same heat added  (a) Otto cycle is more efficient than Diesel cycle  (b) Diesel cycle is more efficient than Otto cycle  (c) efficiency depends on other factors  (d) both Otto and Diesel cycles are equally efficient  (e) none of the above.

Last Answer : Answer : a

Ammonia-absorption refrigeration cycle requires (a) very little work input (b) maximum work input (c) nearly same work input as for vapour compression cycle (d) zero work input

Description : Ammonia-absorption refrigeration cycle requires (a) very little work input (b) maximum work input (c) nearly same work input as for vapour compression cycle (d) zero work input

Last Answer : Ans: a

Ideal refrigeration cycle is (A) Same as Carnot cycle (B) Same as reverse Carnot cycle (C) Dependent on the refrigerant's properties (D) The least efficient of all refrigeration processes

Description : Ideal refrigeration cycle is (A) Same as Carnot cycle (B) Same as reverse Carnot cycle (C) Dependent on the refrigerant's properties (D) The least efficient of all refrigeration processes

Last Answer : (B) Same as reverse Carnot cycle

If both Stirling and Carnot cycles operate within the same temperature limits, then efficiency of Stirling cycle as compared to Carnot cycle  (a) more  (b) less  (c) equal  (d) depends on other factors  (e) none of the above.

Description : If both Stirling and Carnot cycles operate within the same temperature limits, then efficiency of Stirling cycle as compared to Carnot cycle  (a) more  (b) less  (c) equal  (d) depends on other factors  (e) none of the above.

Last Answer : Answer : c

Refrigeration cycle (A) Violates second law of thermodynamics (B) Involves transfer of heat from low temperature to high temperature (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Refrigeration cycle (A) Violates second law of thermodynamics (B) Involves transfer of heat from low temperature to high temperature (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) Involves transfer of heat from low temperature to high temperature

Which of the following quantities has the GREATEST influence on the overall efficiency of a conventional (Rankine cycle) electric generating station burning fossil fuels? w) steam temperature at the steam turbine inlet x) net heating value of the fuel y) steam pressure at the steam turbine inlet z) pounds of ash and sulfur per pound of fuel

Description : Which of the following quantities has the GREATEST influence on the overall efficiency of a conventional (Rankine cycle) electric generating station burning fossil fuels? w) steam temperature at the steam turbine ... pressure at the steam turbine inlet z) pounds of ash and sulfur per pound of fuel 

Last Answer : ANSWER: W -- STEAM TEMPERATURE AT THE STEAM TURBINE INLET 

Efficient burning of anthracite coal requires (A) Low preheat of air (B) Fine grinding (C) High excess air (D) All (A), (B) and (C)

Description : Efficient burning of anthracite coal requires (A) Low preheat of air (B) Fine grinding (C) High excess air (D) All (A), (B) and (C)

Last Answer : (B) Fine grinding

A diesel engine is usually more efficient than a spark ignition engine because a. Diesel being a heavier hydrocarbon, release more heat per kg than gasoline b. The air standard efficiency of diesel cycle is higher than the Otto cycle, at a fixed compression ratio c. The compression ratio of a diesel engine is higher than that of an Spark ignition engine d.Self ignition temperature of diesel is higher than that of gasoline.

Description : A diesel engine is usually more efficient than a spark ignition engine because a. Diesel being a heavier hydrocarbon, release more heat per kg than gasoline b. The air standard efficiency of diesel ... an Spark ignition engine d.Self ignition temperature of diesel is higher than that of gasoline.

Last Answer : ANSWER c. The compression ratio of a diesel engine is higher than that of an S.I engine

The main feature of Carnot refrigeration cycle is that, it (A) Does not need the addition of external work for its functioning (B) Transfers heat from high temperature to low temperature (C) Accomplishes the reverse effect of the heat engine (D) None of these

Description : The main feature of Carnot refrigeration cycle is that, it (A) Does not need the addition of external work for its functioning (B) Transfers heat from high temperature to low temperature (C) Accomplishes the reverse effect of the heat engine (D) None of these

Last Answer : (C) Accomplishes the reverse effect of the heat engine

Higher efficiency in the combustion of solid fuel cannot be achieved by (A) Proper fuel preparation (B) Keeping the flue gas exhaust temperature very high (C) Adopting efficient-fuel firing technique & equipment (D) Supplying correct quantity of combustion air

Description : Higher efficiency in the combustion of solid fuel cannot be achieved by (A) Proper fuel preparation (B) Keeping the flue gas exhaust temperature very high (C) Adopting efficient-fuel firing technique & equipment (D) Supplying correct quantity of combustion air

Last Answer : (B) Keeping the flue gas exhaust temperature very high

Domestic refrigerator usually works on the __________ refrigeration cycle. (A) Carnot (B) Air (C) Absorption (D) vapour-ejection

Description : Domestic refrigerator usually works on the __________ refrigeration cycle. (A) Carnot (B) Air (C) Absorption (D) vapour-ejection

Last Answer : (C) Absorption

Which of the following has the minimum value of COP for a given refrigeration effect? (A) Reverse Carnot cycle (B) Ordinary vapour-compression cycle (C) Vapour-compression process with a reversible expansion engine (D) Air refrigeration cycle

Description : Which of the following has the minimum value of COP for a given refrigeration effect? (A) Reverse Carnot cycle (B) Ordinary vapour-compression cycle (C) Vapour-compression process with a reversible expansion engine (D) Air refrigeration cycle

Last Answer : (D) Air refrigeration cycle

Rotary compressors are used for delivering A. Small quantities of air at high pressure B. Large quantities of air at high pressure C. Small quantities of air at low pressure D. Large quantities of air at low pressure

Description : Rotary compressors are used for delivering A. Small quantities of air at high pressure B. Large quantities of air at high pressure C. Small quantities of air at low pressure D. Large quantities of air at low pressure

Last Answer : ANSWER : D

Co-efficient of Performance (COP) of a refrigerator is the ratio of the (A) Work required to refrigeration obtained (B) Refrigeration obtained to the work required (C) Lower to higher temperature (D) Higher to lower temperature

Description : Co-efficient of Performance (COP) of a refrigerator is the ratio of the (A) Work required to refrigeration obtained (B) Refrigeration obtained to the work required (C) Lower to higher temperature (D) Higher to lower temperature

Last Answer : (B) Refrigeration obtained to the work required

The co-efficient of performance (COP) of a refrigerating system, which is its index of performance, is defined as the ratio of useful refrigeration to the net work. The units of __________ and COP are the same. (A) Kinematic viscosity (B) Work (C) Temperature (D) None of these

Description : The co-efficient of performance (COP) of a refrigerating system, which is its index of performance, is defined as the ratio of useful refrigeration to the net work. The units of __________ and COP are the same. (A) Kinematic viscosity (B) Work (C) Temperature (D) None of these

Last Answer : (D) None of these

Point out the wrong statement. a) Large cloud providers with geographically dispersed sites worldwide, therefore, achieve reliability rates that are hard for private systems to achieve b) Private data centers tend to be located in places where the company or unit was founded or acquired c) A network backbone is a very low-capacity network connection d) None of the mentioned

Description : Point out the wrong statement. a) Large cloud providers with geographically dispersed sites worldwide, therefore, achieve reliability rates that are hard for private systems to achieve b) Private data ... ) A network backbone is a very low-capacity network connection d) None of the mentioned

Last Answer : A network backbone is a very low-capacity network connection

Air refrigeration cycle is used in (a) domestic refrigerators (b) gas liquefaction (c)commercial refrigerators (d) Chillers

Description : Air refrigeration cycle is used in (a) domestic refrigerators (b) gas liquefaction (c)commercial refrigerators (d) Chillers

Last Answer : Ans: b

Air refrigeration cycle is used in (a) domestic refrigerators (b) commercial refrigerators (c) air conditioning (d) gas liquefaction

Description : Air refrigeration cycle is used in (a) domestic refrigerators (b) commercial refrigerators (c) air conditioning (d) gas liquefaction

Last Answer : Ans: d

Air refrigeration operates on (a) Carnot cycle (b) Reversed Carnot cycle (c) Rankine cycle (d) Brayton cycle.

Description : Air refrigeration operates on (a) Carnot cycle (b) Reversed Carnot cycle (c) Rankine cycle (d) Brayton cycle.

Last Answer : Ans: d

The following cycle is used for air craft refrigeration  (a) Brayton cycle  (b) Joule cycle  (c) Carnot cycle  (d) Bell-Coleman cycle  (e) Reversed-Brayton cycle.

Description : The following cycle is used for air craft refrigeration  (a) Brayton cycle  (b) Joule cycle  (c) Carnot cycle  (d) Bell-Coleman cycle  (e) Reversed-Brayton cycle.

Last Answer : Answer : e

For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst can cause the conversion of large amount of reactants which does not mean that catalyst concentration is important (C) The catalyst does not form an intermediate complex with the reactant (D) The surface of the catalyst does not play an important role during reaction

Description : For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst ... with the reactant (D) The surface of the catalyst does not play an important role during reaction

Last Answer : (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction

Weeping in a distillation column (A) Increases tray efficiency (B) Provides large interfacial surface for mass transfer (C) Results due to very high gas velocity (D) Results due to very low gas velocity

Description : Weeping in a distillation column (A) Increases tray efficiency (B) Provides large interfacial surface for mass transfer (C) Results due to very high gas velocity (D) Results due to very low gas velocity

Last Answer : (D) Results due to very low gas velocity

To get high tray efficiency (A) Interfacial surface between liquid and gas phase should be large (B) Time of contact between the two phases should be less (C) Gas velocity should be very low (D) Liquid entrainment should be severe

Description : To get high tray efficiency (A) Interfacial surface between liquid and gas phase should be large (B) Time of contact between the two phases should be less (C) Gas velocity should be very low (D) Liquid entrainment should be severe

Last Answer : (A) Interfacial surface between liquid and gas phase should be large

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of gases in solvent increases at a fixed temperature (C) Decrease in Murphree plate efficiency is an indication of entrainment in distillation column (D) The capacity of a distillation column is maximum at total reflux

Description : Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of ... in distillation column (D) The capacity of a distillation column is maximum at total reflux

Last Answer : (D) The capacity of a distillation column is maximum at total reflux

Air over the oceans is colder in summer and warmer in winter compared with air over the continental regions. This is because (a) Water is translucent and has a relatively high heat capacity compared to dirt (b) Compared to dirt, a thicker layer of water participates in the seasonal cycle (c) The albedo of water is greater than that of land and thus reflects more solar radiation (d) Both A and B are true (e) The effect is due to the changes in circulation between continents and oceans

Description : Air over the oceans is colder in summer and warmer in winter compared with air over the continental regions. This is because (a) Water is translucent and has a relatively high heat capacity compared ... B are true (e) The effect is due to the changes in circulation between continents and oceans

Last Answer : (d) Both A and B are true

Sometimes resellers are offered a temporary price reduction for purchasing specified quantities of a product. Such offers are used to provide them with an incentive to handle a new product, to achieve a temporary price reduction, or to stimulate the purchase of an item in quantities that are considered larger than those usually purchased. What is this sales promotion? A)Push money B)Buy -back allowance C)Buying allowance D)Money -off offer

Description : Sometimes resellers are offered a temporary price reduction for purchasing specified quantities of a product. Such offers are used to provide them with an incentive to handle a new product, to achieve a ... sales promotion? A)Push money B)Buy -back allowance C)Buying allowance D)Money -off offer

Last Answer : C)Buying allowance

The efficiency and work ratio of a simple gas turbine cycle are  A.low  B.very low  C.high  D.very high

Description : The efficiency and work ratio of a simple gas turbine cycle are  A.low  B.very low  C.high  D.very high

Last Answer : Answer: B

Bond crushing law (A) Calls for relatively less energy for the smaller product particles, than does the Rittinger law (B) Is less realistic in estimating the power requirements of commercial crushers (C) States that the work required to form particle of any size from very large feed is proportional to the square root of the volume to surface ratio of the product (D) States that the work required for the crushing is proportional to the new surface created

Description : Bond crushing law (A) Calls for relatively less energy for the smaller product particles, than does the Rittinger law (B) Is less realistic in estimating the power requirements of commercial crushers ( ... (D) States that the work required for the crushing is proportional to the new surface created

Last Answer : (A) Calls for relatively less energy for the smaller product particles, than does the Rittinger law

Energy audit can also save you significant amount of money by……….. a) Maximum energy efficiency b) Minimum energy efficiency c) None of the above d) All of the above

Description : Energy audit can also save you significant amount of money by……….. a) Maximum energy efficiency b) Minimum energy efficiency c) None of the above d) All of the above

Last Answer : Maximum energy efficiency

According to Keynes, business cycles are due to variation in the rate of investment caused by fluctuations, in the - (1) Marginal efficiency of capital (2) Marginal propensity to save (3) Marginal propensity to consumption (4) Marginal efficiency to investment

Description : According to Keynes, business cycles are due to variation in the rate of investment caused by fluctuations, in the - (1) Marginal efficiency of capital (2) Marginal propensity to save (3) Marginal propensity to consumption (4) Marginal efficiency to investment

Last Answer : (1) Marginal efficiency of capital Explanation: According to Keynes' General Theory of Employment, Interest, and Money,' business cycles are caused by variations in the rate of investment ... efficiency of capital. Marginal efficiency of capital means the expected profits from new investments.

Apart from feed heating, what should a plant have to obtain a gain in thermal efficiency? a) Lubrication b) Differential heating c) Reheating cycles d) Regenerative cycles

Description : Apart from feed heating, what should a plant have to obtain a gain in thermal efficiency? a) Lubrication b) Differential heating c) Reheating cycles d) Regenerative cycles

Last Answer : c) Reheating cycles

Which of the following cycles has maximum efficiency  (a) Rankine  (b) Stirling  (c) Carnot  (d) Brayton  (e) Joule.

Description : Which of the following cycles has maximum efficiency  (a) Rankine  (b) Stirling  (c) Carnot  (d) Brayton  (e) Joule.

Last Answer : Answer : c

According to Keynes, business cycles are due to variation in the rate of investment caused by fluctuations , in the (1) Marginal efficiency of capital (2) Marginal propensity to save (3) Marginal propensity to consumption (4) Marginal efficiency to investment

Description : According to Keynes, business cycles are due to variation in the rate of investment caused by fluctuations , in the (1) Marginal efficiency of capital (2) Marginal propensity to save (3) Marginal propensity to consumption (4) Marginal efficiency to investment

Last Answer : Marginal efficiency of capital

Pick out the wrong statement. (A) A refrigeration cycle violates the second law of thermodynamics (B) Refrigeration cycle is normally represented by a temperature vs. entropy plot (C) In a refrigerator, work required decreases as the temperature of the refrigerator and the temperature at which heat is rejected increases (D) One ton of refrigeration is equivalent to the rate of heat absorption equal to 3.53 kW

Description : Pick out the wrong statement. (A) A refrigeration cycle violates the second law of thermodynamics (B) Refrigeration cycle is normally represented by a temperature vs. entropy plot (C) In a refrigerator, ... (D) One ton of refrigeration is equivalent to the rate of heat absorption equal to 3.53 kW

Last Answer : (A) A refrigeration cycle violates the second law of thermodynamics

In an ideal refrigeration cycle, the change in internal energy of the fluid is (A) +ve (B) -ve (C) 0 (D) Either of the above three; depends on the nature of refrigerant

Description : In an ideal refrigeration cycle, the change in internal energy of the fluid is (A) +ve (B) -ve (C) 0 (D) Either of the above three; depends on the nature of refrigerant

Last Answer : (C) 0

Pressure-enthalpy chart is useful in refrigeration. The change in internal energy of an ideal fluid used in ideal refrigeration cycle is (A) Positive (B) Negative (C) Zero (D) Infinity

Description : Pressure-enthalpy chart is useful in refrigeration. The change in internal energy of an ideal fluid used in ideal refrigeration cycle is (A) Positive (B) Negative (C) Zero (D) Infinity

Last Answer : C) Zero

A refrigeration cycle is the same as a __________ cycle, (A) Turbine (B) Heat engine (C) Reversed heat engine (D) None of these

Description : A refrigeration cycle is the same as a __________ cycle, (A) Turbine (B) Heat engine (C) Reversed heat engine (D) None of these

Last Answer : C) Reversed heat engine

The structure which appears to be the only organ to add significant quantities of ketone bodies to the blood is (A) Brain (B) Erythrocytes (C) Liver (D) Skeletal muscle

Description : The structure which appears to be the only organ to add significant quantities of ketone bodies to the blood is (A) Brain (B) Erythrocytes (C) Liver (D) Skeletal muscle

Last Answer : Answer : C

. What type of synchro system is used to transmit very large quantities?

Description : . What type of synchro system is used to transmit very large quantities?

Last Answer : A tri-speed synchro system.

In the genetic disorder of cystinuria, the patient excretes large quantities of cystine in their urine and its low solubility causes crystalline cystine to precipitate as stones in kidneys. The remedy involves ingesting Na HCO3. Reaction of this treatment is (A) NaHCO2 combines with cystine (B) NaHCO3 raises the pH above the isoelectric point of cystine (C) NaHCO3 prevents stone formation by hydrolysis of cystine to cysteine (D) None of these

Description : In the genetic disorder of cystinuria, the patient excretes large quantities of cystine in their urine and its low solubility causes crystalline cystine to precipitate as stones in kidneys. The remedy ... C) NaHCO3 prevents stone formation by hydrolysis of cystine to cysteine (D) None of these

Last Answer : Answer : C

Which of the following statements is true concerning the operation of two alternators in parallel? A. The cycles per second of each alternator are the same. B. Both alternator governors must be set with the same amount of speed droop. C. The number of field poles must be the same on each alternator. D. The load must always be divided equally between alternators.

Description : Which of the following statements is true concerning the operation of two alternators in parallel? A. The cycles per second of each alternator are the same. B. Both alternator governors must be set ... be the same on each alternator. D. The load must always be divided equally between alternators.

Last Answer : Answer: A

Trade-offs between competing effects are necessary for high speed response. Which competing effect (fast transit time, low capacitance, or high quantum efficiency) requires a thin active area?

Description : Trade-offs between competing effects are necessary for high speed response. Which competing effect (fast transit time, low capacitance, or high quantum efficiency) requires a thin active area?

Last Answer : Fast transit time.

Which one of the following statements is correct? A. Reciprocating compressors are used to supply large quantities of air at a lower pressure ratio B. Centrifugal compressors are used to supply large quantities of air at a lower pressure ratio C. Centrifugal compressors are used to supply small quantities of air at a lower pressure ratio D. Centrifugal compressors cannot be run at high speed because of impeller, diffuser and casing.

Description : Which one of the following statements is correct? A. Reciprocating compressors are used to supply large quantities of air at a lower pressure ratio B. Centrifugal compressors are used to supply ... . Centrifugal compressors cannot be run at high speed because of impeller, diffuser and casing.

Last Answer : ANSWER : B

Which of the following is a widely used refrigerant in vapour compression refrigeration system (using large centrifugal compressor)? (A) Freon (B) Liquid sulphur dioxide (C) Methyl chloride (D) Ammonia

Description : Which of the following is a widely used refrigerant in vapour compression refrigeration system (using large centrifugal compressor)? (A) Freon (B) Liquid sulphur dioxide (C) Methyl chloride (D) Ammonia

Last Answer : (A) Freon

Differences between C3 cycles and C4 cycle. -Biology

Description : Differences between C3 cycles and C4 cycle. -Biology

Last Answer : answer: