A diesel engine is usually more efficient than a spark ignition engine because a. Diesel being a heavier hydrocarbon, release more heat per kg than gasoline b. The air standard efficiency of diesel cycle is higher than the Otto cycle, at a fixed compression ratio c. The compression ratio of a diesel engine is higher than that of an Spark ignition engine d.Self ignition temperature of diesel is higher than that of gasoline.

A diesel engine is usually more efficient than a spark ignition engine because a. Diesel being a heavier hydrocarbon, release more heat per kg than gasoline b. The air standard efficiency of diesel cycle is higher than the Otto cycle, at a fixed compression ratio c. The compression ratio of a diesel engine is higher than that of an Spark ignition engine d.Self ignition temperature of diesel is higher than that of gasoline.  
by

1 Answer

Answer :

ANSWER  c. The compression ratio of a diesel engine is higher than that of an S.I engine
by
selected by

Related questions

For same compression ratio a. Diesel cycle has lower efficiency than Otto cycle b. Diesel cycle has higher efficiency than Otto cycle c. Diesel cycle and Otto cycle have equal efficiencies d. Depends upon the load on engine

Description : For same compression ratio a. Diesel cycle has lower efficiency than Otto cycle b. Diesel cycle has higher efficiency than Otto cycle c. Diesel cycle and Otto cycle have equal efficiencies d. Depends upon the load on engine

Last Answer : Answer a. Diesel cycle has lower efficiency than Otto cycle

Which of the following cycle is used for Spark Ignition engine? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Description : Which of the following cycle is used for Spark Ignition engine? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Last Answer : Answer a. Otto cycle

Most high speed compression ignition engine operate on A. dual cycle B. otto cycle C. diesel cycle D.Carnot cycle

Description : Most high speed compression ignition engine operate on A. dual cycle B. otto cycle C. diesel cycle D.Carnot cycle

Last Answer : ANSWER : A

Which of the following cycle is used for Compression Ignition engine? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Description : Which of the following cycle is used for Compression Ignition engine? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Last Answer : Answer b. Diesel cycle

For same compression ratio and heat input a. Otto cycle is more efficient b. Diesel cycle is more efficient c. Both are equally efficient d. None of the above

Description : For same compression ratio and heat input a. Otto cycle is more efficient b. Diesel cycle is more efficient c. Both are equally efficient d. None of the above

Last Answer : ANSWER a. Otto cycle is more efficient

An engine working on air standard Otto cycle has a cylinder diameter of 10 cm and stroke length of 15 cm. The ratio of specific heats for air is 1.4. If the clearance volume is 196.3 cc and the heat supplied per kg of air per cycle is 1800 kJ/kg, then work output per cycle per kg of air is a. 879.1 kJ/ b. 890.2 kJ c. 895.3 kJ d. 973.5 kJ

Description : An engine working on air standard Otto cycle has a cylinder diameter of 10 cm and stroke length of 15 cm. The ratio of specific heats for air is 1.4. If the clearance volume is 196.3 cc and the heat supplied per kg of air per ... kg of air is a. 879.1 kJ/ b. 890.2 kJ c. 895.3 kJ d. 973.5 kJ

Last Answer : ANSWER d. 973.5 kJ

For an engine operating on air standard Otto cycle, the clearance volume is 10% of the swept volume. The specific heat ratio of air is 1.4. The air standard cycle efficiency is a. 38.3 % b. 39.8 % c. 60.2 % d. 61.7 %

Description : For an engine operating on air standard Otto cycle, the clearance volume is 10% of the swept volume. The specific heat ratio of air is 1.4. The air standard cycle efficiency is a. 38.3 % b. 39.8 % c. 60.2 % d. 61.7 %

Last Answer : ANSWER d. 61.7%

An ideal air standard Otto cycle has a compression ratio of 8.5. If the ratio of the specific heats is 1.4, then what is thermal efficiency (in percentage) of the Otto cycle? a. 57.5% b. 45.7% c. 52.5% d. 95%

Description : An ideal air standard Otto cycle has a compression ratio of 8.5. If the ratio of the specific heats is 1.4, then what is thermal efficiency (in percentage) of the Otto cycle? a. 57.5% b. 45.7% c. 52.5% d. 95%

Last Answer : ANSWER a. 57.5%

Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Description : Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Last Answer : Answer: D

Use of gasoline blend like tetraethyl lead in internal combustion engine a. increases the octane rating of the fuel b. allows engine to operate at higher compression ratio c. avoids auto-ignition of fuel d. all of the above

Description : Use of gasoline blend like tetraethyl lead in internal combustion engine a. increases the octane rating of the fuel b. allows engine to operate at higher compression ratio c. avoids auto-ignition of fuel d. all of the above

Last Answer : ANSWER d. all of the above

Air standard Otto cycle is more efficient than the diesel cycle for the same (A) Heat addition & compression ratio (B) Heat addition & pressure (C) Compression ratio & pressure (D) Cylinder dimension & rpm

Description : Air standard Otto cycle is more efficient than the diesel cycle for the same (A) Heat addition & compression ratio (B) Heat addition & pressure (C) Compression ratio & pressure (D) Cylinder dimension & rpm

Last Answer : (A) Heat addition & compression ratio

Pick out the correct statement. (A) Compression ratio of an Otto engine is comparatively higher than a diesel engine (B) Efficiency of an Otto engine is higher than that of a diesel engine for the same compression ratio (C) Otto engine efficiency decreases with the rise in compression ratio, due to decrease in work produced per quantity of heat (D) Diesel engine normally operates at lower compression ratio than an Otto engine for an equal output of work

Description : Pick out the correct statement. (A) Compression ratio of an Otto engine is comparatively higher than a diesel engine (B) Efficiency of an Otto engine is higher than that of a diesel ... Diesel engine normally operates at lower compression ratio than an Otto engine for an equal output of work

Last Answer : (B) Efficiency of an Otto engine is higher than that of a diesel engine for the same compression ratio

If the compression ratio of an engine working on Otto cycle is increased from 5 to 7 the percentage increase in efficiency will be a. 2% b. 4% c. 8% d. 14%

Description : If the compression ratio of an engine working on Otto cycle is increased from 5 to 7 the percentage increase in efficiency will be a. 2% b. 4% c. 8% d. 14%

Last Answer : ANSWER d. 14%

For same compression ratio and for same heat added  (a) Otto cycle is more efficient than Diesel cycle  (b) Diesel cycle is more efficient than Otto cycle  (c) efficiency depends on other factors  (d) both Otto and Diesel cycles are equally efficient  (e) none of the above.

Description : For same compression ratio and for same heat added  (a) Otto cycle is more efficient than Diesel cycle  (b) Diesel cycle is more efficient than Otto cycle  (c) efficiency depends on other factors  (d) both Otto and Diesel cycles are equally efficient  (e) none of the above.

Last Answer : Answer : a

The efficiency of the Otto cycle is independent of a. Heat supplied b. Compression ratio c. Ratio of specific heats d. None of the above

Description : The efficiency of the Otto cycle is independent of a. Heat supplied b. Compression ratio c. Ratio of specific heats d. None of the above

Last Answer : Answer a. Heat supplied

The compression ratio in a Spark Ignition (SI) engine is generally in between a. 7 to 10 b. 10 to 14 c. 14 to 18 d. 18 to 22 (Ans:a)

Description : The compression ratio in a Spark Ignition (SI) engine is generally in between a. 7 to 10 b. 10 to 14 c. 14 to 18 d. 18 to 22 (Ans:a)

Last Answer : Which of the following is not true for two stroke engine as compared to four stroke engine? a. Less cooling is required b. Greater lubrication is required c. More uniform torque on crankshaft d. Complete exhaust of products of combustion (Ans:a)

The thermal efficiency of a diesel cycle having fixed compression ratio with increase in cut-off ratio will a. increase b. decrease c. independent d. increase or decrease depending upon other factors

Description : The thermal efficiency of a diesel cycle having fixed compression ratio with increase in cut-off ratio will a. increase b. decrease c. independent d. increase or decrease depending upon other factors

Last Answer : ANSWER b. decrease

For the same peak pressure and heat input a. Otto cycle is more efficient b. Diesel cycle is more efficient c. Both are equally efficient d. None of the above

Description : For the same peak pressure and heat input a. Otto cycle is more efficient b. Diesel cycle is more efficient c. Both are equally efficient d. None of the above

Last Answer : ANSWER b. Diesel cycle is more efficient

What is the relation between compression ratio (rk) and the efficiency of the Otto cycle? a. efficiency decreases with increase in compression ratio b. efficiency increases with increase in compression ratio c. efficiency is not affected by change in compression ratio d. none of the above

Description : What is the relation between compression ratio (rk) and the efficiency of the Otto cycle? a. efficiency decreases with increase in compression ratio b. efficiency increases with increase in compression ratio c. efficiency is not affected by change in compression ratio d. none of the above

Last Answer : ANSWER b. efficiency increases with increase in compression ratio

Which of the following engine can work on very lean mixture a. Spark ignition engine b. compression ignition engine c. two stroke engine d. Four stroke engine

Description : Which of the following engine can work on very lean mixture a. Spark ignition engine b. compression ignition engine c. two stroke engine d. Four stroke engine

Last Answer : ANSWER b. compression ignition engine

In spark ignition engines, the knocking tendency can be decreased by a) decreasing compression ratio b) controlling intake throttle c) controlling ignition timing d) adding dopes like tetraethyl lead and ethylene dibromide

Description : In spark ignition engines, the knocking tendency can be decreased by a) decreasing compression ratio b) controlling intake throttle c) controlling ignition timing d) adding dopes like tetraethyl lead and ethylene dibromide

Last Answer : Answer: d Explanation: None.

Most high-speed compression engines operate on a. diesel cycle b. Otto cycle c. dual cycle d. Carnot cycle

Description : Most high-speed compression engines operate on a. diesel cycle b. Otto cycle c. dual cycle d. Carnot cycle

Last Answer : ANSWER c. dual cycle

The self-ignition temperature of diesel oil compared to petrol is a. higher b. lower c. same d. depends on the quality of fuel

Description : The self-ignition temperature of diesel oil compared to petrol is a. higher b. lower c. same d. depends on the quality of fuel

Last Answer : ANSWER a. higher

The self-ignition temperature of diesel as compared to petrol is a. higher b. lower c. same d. varies

Description : The self-ignition temperature of diesel as compared to petrol is a. higher b. lower c. same d. varies

Last Answer : ANSWER a. higher

For spark ignition engine, the equivalence ratio of mixture entering the combustion chamber has values (A) for idling and for peak power conditions (B) for both idling and peak power conditions (C) for idling and for peak power conditions (D) for both idling and peak power conditions

Description : For spark ignition engine, the equivalence ratio of mixture entering the combustion chamber has values (A) for idling and for peak power conditions (B) for both idling and peak power conditions (C) for idling and for peak power conditions (D) for both idling and peak power conditions

Last Answer : ANSWER (B) for both idling and peak power conditions

In diesel engine, the fuel is ignited by a. spark b. injected fuel c. heat resulting from compressing air that is supplied for combustion d. ignitor

Description : In diesel engine, the fuel is ignited by a. spark b. injected fuel c. heat resulting from compressing air that is supplied for combustion d. ignitor

Last Answer : ANSWER c. heat resulting from compressing air that is supplied for combustion

For the same capacity engines, the compression ratio of diesel engine a. is lower than the compression ratio of SI engine b. is higher than the compression ratio of SI engine c. is same as the compression ratio of SI engine d. cannot say

Description : For the same capacity engines, the compression ratio of diesel engine a. is lower than the compression ratio of SI engine b. is higher than the compression ratio of SI engine c. is same as the compression ratio of SI engine d. cannot say

Last Answer : ANSWER b. is higher than the compression ratio of SI engine

iesel engine has less reserve torque then spark ignition because ∙ Torque-speed curve is governed by volumetric efficiency of fuel pump and engine cylinder ∙ Torque is a function of thermal efficiency ∙ Diesel engine has generally low speed engine ∙ None of the above

Description : iesel engine has less reserve torque then spark ignition because ∙ Torque-speed curve is governed by volumetric efficiency of fuel pump and engine cylinder ∙ Torque is a function of thermal efficiency ∙ Diesel engine has generally low speed engine ∙ None of the above

Last Answer : ∙ Torque is a function of thermal efficiency

In which of the following cycle heat is added at constant pressure? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Description : In which of the following cycle heat is added at constant pressure? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Last Answer : Answer b. Diesel cycle

In which of the following cycle heat is added at constant volume? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Description : In which of the following cycle heat is added at constant volume? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Last Answer : Answer a. Otto cycle

What is the formula for compression (rk) ratio of the Otto cycle? a. rk = Volume of cylinder at the beginning of compression / Volume of cylinder at the end of compression b. rk = Volume of cylinder at the end of compression / Volume of cylinder at the beginning of compression c. rk = Volume of cylinder at the end of compression / clearance volume d. none of the above

Description : What is the formula for compression (rk) ratio of the Otto cycle? a. rk = Volume of cylinder at the beginning of compression / Volume of cylinder at the end of compression b. rk = Volume of cylinder ... c. rk = Volume of cylinder at the end of compression / clearance volume d. none of the above

Last Answer : ANSWER a. rk = Volume of cylinder at the beginning of compression / Volume of cylinder at the end of compression

In otto cycle compression ratio is 8. Calculate air standard efficiency. Will it be grater than Carnot Cycle ? Justify your answer.

Description : In otto cycle compression ratio is 8. Calculate air standard efficiency. Will it be grater than Carnot Cycle ? Justify your answer. 

Last Answer : No, the Otto cycle efficiency 56.47% will always be lower than Carnot cycle efficiency. Justification: Carnot theorem states that keeping operating conditions same, Carnot engine is more efficient than any other engine. So, Otto cycle efficiency is lower than Carnot cycle efficiency. 

The efficiency of an Otto engine compared to that of a diesel engine, for the same compression ratio will be (A) More (B) Less (C) Same (D) Data insufficient to predict

Description : The efficiency of an Otto engine compared to that of a diesel engine, for the same compression ratio will be (A) More (B) Less (C) Same (D) Data insufficient to predict

Last Answer : (A) More

The accumulation of carbon in a cylinder results in increase of A. clearance volume B. volumetric efficiency C. ignition time D. effective compression ratio

Description : The accumulation of carbon in a cylinder results in increase of A. clearance volume B. volumetric efficiency C. ignition time D. effective compression ratio

Last Answer : ANSWER : D

The accumulation of carbon in a cylinder results in increase of a. clearance volume b. volumetric efficiency c. ignition time d. effective compression ratio

Description : The accumulation of carbon in a cylinder results in increase of a. clearance volume b. volumetric efficiency c. ignition time d. effective compression ratio

Last Answer : ANSWER d. effective compression ratio

In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air consumption, brake power and incylinder pressure. Tutorials on engine performance parameters. Heat balance sheet. Engine performance curves. 1. The increase in intake air temperature into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Description : In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air ... into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Last Answer : ANSWER : B

Spark plug is provided in a/an (A) Engine having carburettor (B) Diesel engine (C) Compression ignition engine (D) Both (B) & (C)

Description : Spark plug is provided in a/an (A) Engine having carburettor (B) Diesel engine (C) Compression ignition engine (D) Both (B) & (C)

Last Answer : (A) Engine having carburettor

For the same maximum pressure and temperature, what is the relation among the efficiencies of the Otto cycle, the Diesel cycle and the Dual cycle? a. ηDual >ηDiesel >ηOtto b. ηDiesel >ηDual >ηOtto c. ηDiesel >ηOtto >ηDual d. ηOtto >ηDiesel >ηDual

Description : For the same maximum pressure and temperature, what is the relation among the efficiencies of the Otto cycle, the Diesel cycle and the Dual cycle? a. ηDual >ηDiesel >ηOtto b. ηDiesel >ηDual >ηOtto c. ηDiesel >ηOtto >ηDual d. ηOtto >ηDiesel >ηDual

Last Answer : ANSWER b. ηDiesel >ηDual >ηOtto

In SI engines knocking can be reduced by (a) Increasing the compression ratio (b) Increasing the cooling water temperature (c) Retarding the spark advance (d) Increasing the inlet air temperature

Description : In SI engines knocking can be reduced by (a) Increasing the compression ratio (b) Increasing the cooling water temperature (c) Retarding the spark advance (d) Increasing the inlet air temperature

Last Answer : Ans :c

In a battery ignition system, the intensity of spark is A. minimum at low engine speed B. minimum at low engine speed and increases with engine speed C. maximum al low engine speed and decreases with engine speed D. maximum at low engine speed

Description : In a battery ignition system, the intensity of spark is A. minimum at low engine speed B. minimum at low engine speed and increases with engine speed C. maximum al low engine speed and decreases with engine speed D. maximum at low engine speed

Last Answer : ANSWER : C

The knocking in spark ignition engines can be reduced by a. Retarding the spark. b. Increasing the engine speed. c. Both a and b d. None of these.

Description : The knocking in spark ignition engines can be reduced by a. Retarding the spark. b. Increasing the engine speed. c. Both a and b d. None of these.

Last Answer : ANSWER c. Both a and b.

Which of the following is not related to spark ignition engine? a. fuel injector b. spark plug c. flywheel d. distributor

Description : Which of the following is not related to spark ignition engine? a. fuel injector b. spark plug c. flywheel d. distributor

Last Answer : ANSWER a. fuel injector

The knocking in spark ignition engines can be reduced by a. Retarding the spark. b. Increasing the engine speed. c. Both a and b. d. None of these.

Description : The knocking in spark ignition engines can be reduced by a. Retarding the spark. b. Increasing the engine speed. c. Both a and b. d. None of these.

Last Answer : ANSWER c. Both a and b

In compression ignition (CI) engine, the compression ratio is a. Cylinder volume / Clearance volume b. Swept Volume / Cylinder Volume c. Clearance volume / Cylinder volume d. Cylinder volume / Swept volume (Ans:a)

Description : In compression ignition (CI) engine, the compression ratio is a. Cylinder volume / Clearance volume b. Swept Volume / Cylinder Volume c. Clearance volume / Cylinder volume d. Cylinder volume / Swept volume (Ans:a)

Last Answer : In two stroke engine there is one power stroke in _____ of crankshaft rotation. a. 90° b. 180° c. 270° d. 360° (Ans:d)

The compression ratio cannot be increased beyond certain limit as it results in a. auto-ignition of fuel b. detonation c. engine knocking d. all the above

Description : The compression ratio cannot be increased beyond certain limit as it results in a. auto-ignition of fuel b. detonation c. engine knocking d. all the above

Last Answer : ANSWER d. all the above

The probability of knocking in diesel engines is increased by a. High self-ignition temperature. b. Low volatility. c. High viscosity. d. all of the above

Description : The probability of knocking in diesel engines is increased by a. High self-ignition temperature. b. Low volatility. c. High viscosity. d. all of the above

Last Answer : ANSWER d. all of the above

The probability of knocking in diesel engines is increased by a. High self-ignition temperature. b. Low volatility. c. High viscosity. d. All of the above

Description : The probability of knocking in diesel engines is increased by a. High self-ignition temperature. b. Low volatility. c. High viscosity. d. All of the above

Last Answer : ANSWER d. all of the above

Rate of burning in the compression ignition engine can be controlled by a. rate of injection of fuel b. rate of air taken into carburetor c. both a. and b. d. none of the above

Description : Rate of burning in the compression ignition engine can be controlled by a. rate of injection of fuel b. rate of air taken into carburetor c. both a. and b. d. none of the above

Last Answer : ANSWER a. rate of injection of fuel

With increase in __________ Knocking tendency in a spark ignition petrol engine decreases. (A) Supercharging (B) Wall temperature (C) Compression ratio (D) Engine speed

Description : With increase in __________ Knocking tendency in a spark ignition petrol engine decreases. (A) Supercharging (B) Wall temperature (C) Compression ratio (D) Engine speed

Last Answer : Option D

The ratio of work done per cycle to the stroke volume of the compressor is known as A. Compressor capacity B. Compression ratio C. Compressor efficiency D. Mean effective pressure

Description : The ratio of work done per cycle to the stroke volume of the compressor is known as A. Compressor capacity B. Compression ratio C. Compressor efficiency D. Mean effective pressure

Last Answer : ANSWER : D