Effective stress is (A) The stress at particles contact (B) A physical parameter that can be measured (C) Important because it is a function of engineering properties of soil (D) All of the above

Effective stress is
(A) The stress at particles contact
(B) A physical parameter that can be measured
(C) Important because it is a function of engineering properties of soil
(D) All of the above
by

1 Answer

Answer :

Answer: Option C
by

Related questions

The neutral stress in a soil mass is (A) Force per neutral area (B) Force per effective area (C) Stress taken up by the pore water (D) Stress taken up by solid particles

Description : The neutral stress in a soil mass is (A) Force per neutral area (B) Force per effective area (C) Stress taken up by the pore water (D) Stress taken up by solid particles

Last Answer : Answer: Option C

The shear resistance of a soil is constituted basically of the following component. (A) The frictional resistance to translocation between the individual soil particles at their contact point (B) To the structural relation to displacement of the soil because of the interlocking of the particles (C) Cohesion and adhesion between the surfaces of the soil particles (D) All the above

Description : The shear resistance of a soil is constituted basically of the following component. (A) The frictional resistance to translocation between the individual soil particles at their contact point (B) To the ... (C) Cohesion and adhesion between the surfaces of the soil particles (D) All the above

Last Answer : Answer: Option D

Consider the following statements: 1. For a saturated soil, Skempton’s B-parameter is nearly equal to unity. 2. For an undisturbed sensitive clay, the stress-strain curve shows a peak. 3. Interlocking contributes significantly to the shearing strength in case of dense sand. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. For a saturated soil, Skempton's B-parameter is nearly equal to unity. 2. For an undisturbed sensitive clay, the stress-strain curve shows a peak. 3. Interlocking contributes significantly to the shearing ... 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (a) 1, 2 & 3

If K is a constant depending upon the ratio of the width of the slab to its effective span l, x is the distance of the concentrated load from the nearer support, bw is the width of the area of contact of the concentrated load measured parallel to the supported edge, the effective width of the slab be is (A) K/x (1 + x/d) + bw (B) Kx (1 - x/l) + bw (C) Kx (1 + x/l) + bw (D) All the above

Description : If K is a constant depending upon the ratio of the width of the slab to its effective span l, x is the distance of the concentrated load from the nearer support, bw is the width of the area of contact of the concentrated load measured ... ) Kx (1 - x/l) + bw (C) Kx (1 + x/l) + bw (D) All the above

Last Answer : Answer: Option B

Shear strength of a soil is a unique function of (A) Effective stress only (B) Total stress only (C) Both effective stress and total stress (D) None of the above

Description : Shear strength of a soil is a unique function of (A) Effective stress only (B) Total stress only (C) Both effective stress and total stress (D) None of the above

Last Answer : Answer: Option A

The bearing capacity of a soil depends upon (A) Size of the particles (B) Shape of the particles (C) Cohesive properties of particles (D) All the above

Description : The bearing capacity of a soil depends upon (A) Size of the particles (B) Shape of the particles (C) Cohesive properties of particles (D) All the above

Last Answer : Answer: Option D

Pick out the wrong statement. (A) Cold cracking of a weld is due to the presence of hydrogen gas in the weld (B) True stress is given by, σ = σE (1 + εE), where σE and εE are engineering stress and engineering strain respectively (C) Phosphorous can be easily recovered in the iron blast furnace (D) High residual stress at the surface is beneficial for fatigue properties of a material

Description : Pick out the wrong statement. (A) Cold cracking of a weld is due to the presence of hydrogen gas in the weld (B) True stress is given by, σ = σE (1 + εE), where σE and εE ... in the iron blast furnace (D) High residual stress at the surface is beneficial for fatigue properties of a material

Last Answer : Option C

Select the incorrect statement. Effective angle of shearing resistance (A) Increases as the size of particles increases (B) Increases as the soil gradation improves (C) Is limited to a maximum value of 45° (D) Is rarely more than 30° for fine grained soil

Description : Select the incorrect statement. Effective angle of shearing resistance (A) Increases as the size of particles increases (B) Increases as the soil gradation improves (C) Is limited to a maximum value of 45° (D) Is rarely more than 30° for fine grained soil

Last Answer : (C) Is limited to a maximum value of 45°

The effective size of particles of soil is denoted by (A) D10 (B) D20 (C) D30 (D) D60

Description : The effective size of particles of soil is denoted by (A) D10 (B) D20 (C) D30 (D) D60

Last Answer : (A) D10

When the seepage pressure becomes equal to the pressure due to submerged weight of a soil, the effective pressure is reduced to zero and the soil particles have a tendency to move up in the direction of flow. This phenomenon is generally known (A) Quick condition (B) Boiling condition (C) Quick sand (D) All the above

Description : When the seepage pressure becomes equal to the pressure due to submerged weight of a soil, the effective pressure is reduced to zero and the soil particles have a tendency to move up in the direction of flow. ... known (A) Quick condition (B) Boiling condition (C) Quick sand (D) All the above

Last Answer : Answer: Option D

If the viscosity of ground water is 1.00, the Slitcher's constant is 400, the effective size of soil particles in aquifer is 0.5 mm and hydraulic gradient is 1 in 80, the velocity of flow is (A) 0.25 m/day (B) 0.50 m/day (C) 1.00 m/day (D) 1.25 m/day

Description : If the viscosity of ground water is 1.00, the Slitcher's constant is 400, the effective size of soil particles in aquifer is 0.5 mm and hydraulic gradient is 1 in 80, the velocity of flow is (A) 0.25 m/day (B) 0.50 m/day (C) 1.00 m/day (D) 1.25 m/day

Last Answer : Answer: Option D

A colligative property depends on: w) chemical properties of particles in system x) physical properties of particles in system y) number of particles present in system z) all of the above

Description : A colligative property depends on: w) chemical properties of particles in system x) physical properties of particles in system y) number of particles present in system z) all of the above

Last Answer : ANSWER: Y -- NUMBER OF PARTICLES PRESENT IN SYSTEM

In a deposit of normally consolidated clay (A) Effective stress increases with depth but water content of soil and undrained strength decrease with depth (B) Effective stress and water content increase with depth but undrained strength decreases with depth C) Effective stress and undrained strength increase with depth but water content decreases with depth (D) Effective stress, water content and undrained strength decrease with depth

Description : In a deposit of normally consolidated clay (A) Effective stress increases with depth but water content of soil and undrained strength decrease with depth (B) Effective stress and water ... decreases with depth (D) Effective stress, water content and undrained strength decrease with depth

Last Answer : C) Effective stress and undrained strength increase with depth but water content decreases with depth

Effective stress on soil (A) Increases voids ratio and decreases permeability (B) Increases both voids ratio and permeability (C) Decreases both voids ratio and permeability (D) Decreases voids ratio and increases permeability

Description : Effective stress on soil (A) Increases voids ratio and decreases permeability (B) Increases both voids ratio and permeability (C) Decreases both voids ratio and permeability (D) Decreases voids ratio and increases permeability

Last Answer : Answer: Option C

Sensors which are come in contact with some surface to measured desired physical variable areknown as____ a.Non-contact sensors b.Proximity sensors c.Contact sensors d.None of the above

Description : Sensors which are come in contact with some surface to measured desired physical variable areknown as____ a.Non-contact sensors b.Proximity sensors c.Contact sensors d.None of the above

Last Answer : c.Contact sensors

Sensors which are come in contact with some surface to measured desired physical variable are known as____. (A) Non-contact sensors (B) Proximity sensors (C) Contact sensors (D) None of the above

Description : Sensors which are come in contact with some surface to measured desired physical variable are known as____. (A) Non-contact sensors (B) Proximity sensors (C) Contact sensors (D) None of the above

Last Answer : C

Time factor for a clay layer is (A) A dimensional parameter (B) Directly proportional to permeability of soil (C) Inversely proportional to drainage path (D) Independent of thickness of clay layer

Description : Time factor for a clay layer is (A) A dimensional parameter (B) Directly proportional to permeability of soil (C) Inversely proportional to drainage path (D) Independent of thickness of clay layer

Last Answer : (B) Directly proportional to permeability of soil

Consider the following statements: 1. Relative density is a meaningful parameter for all types of soils 2. Relative density is a meaningful parameter only for cohesion soils. 3. Relative density is a better indicator of the denseness of an in-situ granular soil deposit than the void ratio. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. Relative density is a meaningful parameter for all types of soils 2. Relative density is a meaningful parameter only for cohesion soils. 3. Relative density is a better indicator of the denseness of an in ... , 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (d) 1 & 3 only

In a standard multimeter for measuring AC voltage, parameter of _____ voltage is measured

Description : In a standard multimeter for measuring AC voltage, parameter of _____ voltage is measured

Last Answer : In a standard multimeter for measuring AC voltage, parameter of RMS voltage is measured

Black cotton soil is unsuitable for foundations because its (A) Bearing capacity is low (B) Permeability is uncertain (C) Particles are cohesive (D) Property to undergo a volumetric change due to variation of moisture content

Description : Black cotton soil is unsuitable for foundations because its (A) Bearing capacity is low (B) Permeability is uncertain (C) Particles are cohesive (D) Property to undergo a volumetric change due to variation of moisture content

Last Answer : Answer: Option D

Sensors in which there is no need to contact the surface to measure the parameter or any variables are known as the ____ . (A) Tactile sensors (B) Touch sensors (C) Non-contact sensors (D) Force sensors

Description : Sensors in which there is no need to contact the surface to measure the parameter or any variables are known as the ____ . (A) Tactile sensors (B) Touch sensors (C) Non-contact sensors (D) Force sensors

Last Answer : C

The direct shear test suffers from the following disadvantage: (A) Drain condition cannot be controlled (B) Pore water pressure cannot be measured (C) Shear stress on the failure plane is not uniform (D) The area under the shear and vertical loads does not remain constant throughout the test

Description : The direct shear test suffers from the following disadvantage: (A) Drain condition cannot be controlled (B) Pore water pressure cannot be measured (C) Shear stress on the failure plane is not uniform (D) The area under the shear and vertical loads does not remain constant throughout the test

Last Answer : Answer: Option C

Select the incorrect statement. (A) Effective cohesion of a soil can never have a negative value. (B) Effective angle of internal friction for coarse grained soils is rarely below 30°. (C) Effective angle of internal friction for a soil increases as state of compactness increases. (D) Effective angle of internal friction is a complicated function of mineralogy and clay size content.

Description : Select the incorrect statement. (A) Effective cohesion of a soil can never have a negative value. (B) Effective angle of internal friction for coarse grained soils is rarely below 30°. (C ... (D) Effective angle of internal friction is a complicated function of mineralogy and clay size content.

Last Answer : Answer: Option A

In a singly reinforced beam, the effective depth is measured from its compression edge to (A) Tensile edge (B) Tensile reinforcement (C) Neutral axis of the beam (D) Longitudinal central axis

Description : In a singly reinforced beam, the effective depth is measured from its compression edge to (A) Tensile edge (B) Tensile reinforcement (C) Neutral axis of the beam (D) Longitudinal central axis

Last Answer : Answer: Option B

In a singly reinforced beam, the effective depth is measured form the compression edge to the (a) Tensile edge (b) Centre of tensile reinforcement (c) Neutral axis of the beam (d) All of the above

Description : In a singly reinforced beam, the effective depth is measured form the compression edge to the (a) Tensile edge (b) Centre of tensile reinforcement (c) Neutral axis of the beam (d) All of the above

Last Answer : (b) Centre of tensile reinforcement

Enlist the physical properties of soil and explain any one of them.

Description : Enlist the physical properties of soil and explain any one of them.

Last Answer : Physical properties of soil: 1. Void ratio ( e ) 2. Porosity ( n ) 3. Degree of saturation ( s ) 4. Density index ( ID ) 5. Density ( p ) Void ratio ( e ): The ratio of volume of voids (VV = Va + VW) to the total volume (V) of solids is called as void ratio. 

In a soil-free system, the most effective safener was the ……………….one most in structure to the herbicide a). similar b). different c). systematic d). contact

Description : In a soil-free system, the most effective safener was the ……………….one most in structure to the herbicide a). similar b). different c). systematic d). contact

Last Answer : a). similar

Pick up the correct statement from the following: (A) The distance of the eccentric axial load from the C.G. beyond which tension develops, is known as kern distance (B) In visco-elastic material, stress-strain relation is dependent on time (C) An orthotropic material has different properties in three mutually perpendicular directions (D) All the above

Description : Pick up the correct statement from the following: (A) The distance of the eccentric axial load from the C.G. beyond which tension develops, is known as kern distance (B) In visco ... (C) An orthotropic material has different properties in three mutually perpendicular directions (D) All the above

Last Answer : (D) All the above

Depending upon the properties of a material, the failure envelope may (A) Be either straight or curved (B) Pass through the origin of stress (C) Intersect the shear stress axis (D) All the above

Description : Depending upon the properties of a material, the failure envelope may (A) Be either straight or curved (B) Pass through the origin of stress (C) Intersect the shear stress axis (D) All the above

Last Answer : (D) All the above

Cumulative analysis for determining surface is more precise than differential analysis, because of the (A) Assumption that all particles in a single fraction are equal in size (B) Fact that screening is more effective (C) Assumption that all particles in a single fraction are equal in size, is not needed (D) None of these

Description : Cumulative analysis for determining surface is more precise than differential analysis, because of the (A) Assumption that all particles in a single fraction are equal in size (B) Fact that screening is more ... all particles in a single fraction are equal in size, is not needed (D) None of these

Last Answer : (C) Assumption that all particles in a single fraction are equal in size, is not needed

For general engineering purposes, soils are classified by (A) Particle size classification system (B) Textural classification system (C) High Way Research Board (HRB), classification system (D) Unified soil classification system

Description : For general engineering purposes, soils are classified by (A) Particle size classification system (B) Textural classification system (C) High Way Research Board (HRB), classification system (D) Unified soil classification system

Last Answer : Answer: Option D

A cyclone is an engineering device that is used to - (1) transport materials (2) segregate particles (3) control switching devices (4) model fractals

Description : A cyclone is an engineering device that is used to - (1) transport materials (2) segregate particles (3) control switching devices (4) model fractals

Last Answer : (2) segregate particles Explanation: When removing particulate matter from liquid, a hydrocyclone issued; while from gas, a gas cyclone is used.

A cyclone is an engineering device that is used to w) transport materials x) segregate particles y) control switching devices z) model fractals

Description : A cyclone is an engineering device that is used to w) transport materials x) segregate particles y) control switching devices z) model fractals

Last Answer : ANSWER: X -- SEGREGATE PARTICLES

Physical properties of a permeant which influence permeability are(A) Viscosity only (B) Unit weight only (C) Both viscosity and unit weight (D) None of the above

Description : Physical properties of a permeant which influence permeability are (A) Viscosity only (B) Unit weight only (C) Both viscosity and unit weight (D) None of the above

Last Answer : Answer: Option C

Minimum size of the particles of silt soil, is (A) 0.002 mm (B) 0.04 mm (C) 0.06 mm (D) 0.08 mm

Description : Minimum size of the particles of silt soil, is (A) 0.002 mm (B) 0.04 mm (C) 0.06 mm (D) 0.08 mm

Last Answer : (A) 0.002 mm

The soil which contains finest grain particles, is (A) Coarse sand (B) Fine sand (C) Silt (D) Clay

Description : The soil which contains finest grain particles, is (A) Coarse sand (B) Fine sand (C) Silt (D) Clay

Last Answer : (D) Clay

A compacted soil sample using 10% moisture content has a weight of 200 g and mass unit weight of 2.0 g/cm3 . If the specific gravity of soil particles and water are 2.7 and 1.0, the degree of saturation of the soil is (A) 11.1 % (B) 55.6 % (C) 69.6 % (D) None of these

Description : A compacted soil sample using 10% moisture content has a weight of 200 g and mass unit weight of 2.0 g/cm3 . If the specific gravity of soil particles and water are 2.7 and 1.0, the degree of saturation of the soil is (A) 11.1 % (B) 55.6 % (C) 69.6 % (D) None of these

Last Answer : (B) 55.6 %

The capillary rise of water (A) Depends upon the force responsible (B) Increases as the size of the soil particles increases (C) Decreases as the size of the soil particles decreases (D) Is less in wet soil than in dry soil

Description : The capillary rise of water (A) Depends upon the force responsible (B) Increases as the size of the soil particles increases (C) Decreases as the size of the soil particles decreases (D) Is less in wet soil than in dry soil

Last Answer : (A) Depends upon the force responsible

Pick up the correct statement from the following: (A) To an agriculturist, soil is the substance existing on the earth's surface, which grows and develops plants (B) To a geologist, soil is the material in a relatively thin surface zone within which roots occur, and rest of the crust is termed as rock irrespective of hardness (C) To an engineer, soil is the unaggregated and uncemented deposits of minerals and organic particles covering the earth's crust (D) All the above

Description : Pick up the correct statement from the following: (A) To an agriculturist, soil is the substance existing on the earth's surface, which grows and develops plants (B) To a geologist, soil ... and uncemented deposits of minerals and organic particles covering the earth's crust (D) All the above

Last Answer : (D) All the above

The specific yield of soil depends upon (A) Compaction of stratum (B) Distribution of pores (C) Shape and size of particles (D) All the above

Description : The specific yield of soil depends upon (A) Compaction of stratum (B) Distribution of pores (C) Shape and size of particles (D) All the above

Last Answer : (D) All the above

A saturated soil sample has water content of 40% and specific gravity of soil particles 2.7. The void ratio of the soil, is (A) 0.4 (B) 0.52 (C) 1.08 (D) None of these

Description : A saturated soil sample has water content of 40% and specific gravity of soil particles 2.7. The void ratio of the soil, is (A) 0.4 (B) 0.52 (C) 1.08 (D) None of these

Last Answer : (C) 1.08

Sedimentation analysis is based on the assumption: (A) Soil particles are spherical (B) Particles settle independent of other particles (C) Walls of the jar do not affect the settlement (D) All the above

Description : Sedimentation analysis is based on the assumption: (A) Soil particles are spherical (B) Particles settle independent of other particles (C) Walls of the jar do not affect the settlement (D) All the above

Last Answer : (D) All the above

A partially saturated sample of soil has a unit weight of 2.0 g/cm3 and specific gravity of soil particles is 2.6. If the moisture content in the soil is 20%, the degree of saturation is (A) 20 % (B) 77 % (C) 92 % (D) None of these

Description : A partially saturated sample of soil has a unit weight of 2.0 g/cm3 and specific gravity of soil particles is 2.6. If the moisture content in the soil is 20%, the degree of saturation is (A) 20 % (B) 77 % (C) 92 % (D) None of these

Last Answer : Answer: Option C

Which of the following statements is correct? (A) Uniformity coefficient represents the shape of the particle size distribution curve. (B) For a well graded soil, both uniformity coefficient and coefficient of curvature are nearly unity. (C) A soil is said to be well graded if it has most of the particles of about the same size (D) None of the above

Description : Which of the following statements is correct? (A) Uniformity coefficient represents the shape of the particle size distribution curve. (B) For a well graded soil, both uniformity coefficient and coefficient of ... if it has most of the particles of about the same size (D) None of the above

Last Answer : Answer: Option D

Pick up the incorrect definition from the following: (A) Ratio of the compressive strength of unconfined undisturbed soil to that of remoulded soil, is known as the sensitivity of the soil sample (B) The rotation of soil particles into stable state while remoulding, is known as the thiostropy of soil (C) The water content at which a soil flows, is known plastic limit of the soil (D) None of these

Description : Pick up the incorrect definition from the following: (A) Ratio of the compressive strength of unconfined undisturbed soil to that of remoulded soil, is known as the sensitivity of the soil sample (B) The ... content at which a soil flows, is known plastic limit of the soil (D) None of these

Last Answer : Answer: Option D

260 g of wet soil was taken in a pycnometer jar of weight 400 g in order to find the moisture content in the soil, with specific gravity of soil particles 2.75. The weight of soil and remaining water filled in pycnometer without air bubbles was 1415 g and the weight of pycnometer filled with water alone was 1275 g. The moisture content in the soil is (A) 24.2 % (B) 18.2 % (C) 53.8 % (D) None of these

Description : 260 g of wet soil was taken in a pycnometer jar of weight 400 g in order to find the moisture content in the soil, with specific gravity of soil particles 2.75. The weight of soil and remaining water filled in pycnometer without air ... is (A) 24.2 % (B) 18.2 % (C) 53.8 % (D) None of these

Last Answer : Answer: Option B

Dispersed type of soil structure is an arrangement comprising particles having (A) Face to face or parallel orientation (B) Edge to edge orientation (C) Edge to face orientation (D) All of the above

Description : Dispersed type of soil structure is an arrangement comprising particles having (A) Face to face or parallel orientation (B) Edge to edge orientation (C) Edge to face orientation (D) All of the above

Last Answer : Answer: Option A

Infiltration capacity of soil depends upon (A) Number of voids present in the soil (B) Shape and size of soil particles (C) Arrangement of soil particles (D) All the above

Description : Infiltration capacity of soil depends upon (A) Number of voids present in the soil (B) Shape and size of soil particles (C) Arrangement of soil particles (D) All the above

Last Answer : Answer: Option D

What are the important physical properties of platelets? -Biology

Description : What are the important physical properties of platelets? -Biology

Last Answer : answer:

__________ is the most important element, which controls the physical properties of steel. (A) Manganese (B) Silicon (C) Carbon (D) Vanadium

Description : __________ is the most important element, which controls the physical properties of steel. (A) Manganese (B) Silicon (C) Carbon (D) Vanadium

Last Answer : (C) Carbon