Pick up the correct statement from the following: (A) The distance of the eccentric axial load from the C.G. beyond which tension develops, is known as kern distance (B) In visco-elastic material, stress-strain relation is dependent on time (C) An orthotropic material has different properties in three mutually perpendicular directions (D) All the above

Pick up the correct statement from the following:
(A) The distance of the eccentric axial load from the C.G. beyond which tension develops, is
known as kern distance
(B) In visco-elastic material, stress-strain relation is dependent on time
(C) An orthotropic material has different properties in three mutually perpendicular directions
(D) All the above
by

1 Answer

Answer :

(D) All the above
by

Related questions

In a two way slab flexural bending develops [ A ] Along short span [ B ] Along long span [ C ] In Mutually perpendicular directions [ D ] At the center of short span

Description : In a two way slab flexural bending develops [ A ] Along short span [ B ] Along long span [ C ] In Mutually perpendicular directions [ D ] At the center of short span

Last Answer : [ C ] In Mutually perpendicular directions

The behaviour of visco-elastic material is time dependent. This behaviour is common in __________ materials. (A) Non-crystalline solid (B) Crystalline (C) Rubbery (D) Non-crystalline organic polymeric

Description : The behaviour of visco-elastic material is time dependent. This behaviour is common in __________ materials. (A) Non-crystalline solid (B) Crystalline (C) Rubbery (D) Non-crystalline organic polymeric

Last Answer : (D) Non-crystalline organic polymeric

Pick out the correct statement. (A) Materials exhibiting high elasticity obey Hooke's law (B) The elastic behaviour of rubber under compression is the same as its behaviour under tension (C) The damping capacity of a material is due to its plastic deformation (D) The stress required to cause plastic flow in polycrystalline material is

Description : Pick out the correct statement. (A) Materials exhibiting high elasticity obey Hooke's law (B) The elastic behaviour of rubber under compression is the same as its behaviour under tension (C) ... to its plastic deformation (D) The stress required to cause plastic flow in polycrystalline material is

Last Answer : Option B

Visco-elastic behaviour of materials which is time dependent is common in (A) Plastics (B) Crystalline solid (C) Non-crystalline solids (D) Non-crystalline organic polymer

Description : Visco-elastic behaviour of materials which is time dependent is common in (A) Plastics (B) Crystalline solid (C) Non-crystalline solids (D) Non-crystalline organic polymer

Last Answer : (D) Non-crystalline organic polymer

Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent) varies linearly as the radial distance (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Description : Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent ... of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Last Answer : (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity

Hooke's law (A) Applies to elastic deformation (B) Applies beyond limit of proportionality in stress-strain curve (C) States that stress is inversely proportional to strain upto elastic limit (D) None of these

Description : Hooke's law (A) Applies to elastic deformation (B) Applies beyond limit of proportionality in stress-strain curve (C) States that stress is inversely proportional to strain upto elastic limit (D) None of these

Last Answer : (A) Applies to elastic deformation

Pick out the wrong statement. (A) Cold cracking of a weld is due to the presence of hydrogen gas in the weld (B) True stress is given by, σ = σE (1 + εE), where σE and εE are engineering stress and engineering strain respectively (C) Phosphorous can be easily recovered in the iron blast furnace (D) High residual stress at the surface is beneficial for fatigue properties of a material

Description : Pick out the wrong statement. (A) Cold cracking of a weld is due to the presence of hydrogen gas in the weld (B) True stress is given by, σ = σE (1 + εE), where σE and εE ... in the iron blast furnace (D) High residual stress at the surface is beneficial for fatigue properties of a material

Last Answer : Option C

The base of a column is subjected to moment. If the intensity of bearing pressure due to axial load is equal to stress due to moment, then the bearing pressure between the base and the concrete is (a) Uniform compression throughout (b) Zero at one end and compression at the other end (c) Tension at one end and compression at the other end (d) Compression, verying as a parabolic profile

Description : The base of a column is subjected to moment. If the intensity of bearing pressure due to axial load is equal to stress due to moment, then the bearing pressure between the base and the concrete ... Tension at one end and compression at the other end (d) Compression, verying as a parabolic profile

Last Answer : (b) Zero at one end and compression at the other end

Under complex loading, if elastic limit reaches in tension, then failure occurs due to (a) Firstly Maximum principal strain theory (b) Secondly Maximum principal theory of strain energy (c) Thirdly Maximum Principal stress theory (d) None

Description : Under complex loading, if elastic limit reaches in tension, then failure occurs due to (a) Firstly Maximum principal strain theory (b) Secondly Maximum principal theory of strain energy (c) Thirdly Maximum Principal stress theory (d) None

Last Answer : (c) Thirdly Maximum Principal stress theory

Under complex loading, if elastic limit reaches in tension, then failure occurs due to (a) Firstly Maximum principal strain theory (b) Secondly Maximum principal theory of strain energy (c) Thirdly Maximum shear stress theory (d) None

Description : Under complex loading, if elastic limit reaches in tension, then failure occurs due to (a) Firstly Maximum principal strain theory (b) Secondly Maximum principal theory of strain energy (c) Thirdly Maximum shear stress theory (d) None

Last Answer : (d) None

Hot & cold working of material causes its __________ deformation. (A) Visco-elastic (B) Isotropic (C) Elastic (D) Plastic

Description : Hot & cold working of material causes its __________ deformation. (A) Visco-elastic (B) Isotropic (C) Elastic (D) Plastic

Last Answer : (D) Plastic

Select the incorrect statement from the following In eccentrically loaded columns, [ A ] The tensile strength of concrete is ignored [ B ] Design stress – strain curve for steel in compression is the same as in tension [ C ] The strain at different points in the section will be same [ D ] Plane section remain plane even after bending

Description : Select the incorrect statement from the following In eccentrically loaded columns, [ A ] The tensile strength of concrete is ignored [ B ] Design stress - strain curve for steel in compression is the ... different points in the section will be same [ D ] Plane section remain plane even after bending

Last Answer : [ C ] The strain at different points in the section will be same

The ratio of shear stress and shear strain of an elastic material, is (A) Modulus of Rigidity (B) Shear Modulus (C) Modulus of Elasticity (D) Both (a) and (b)

Description : The ratio of shear stress and shear strain of an elastic material, is  (A) Modulus of Rigidity  (B) Shear Modulus  (C) Modulus of Elasticity  (D) Both (a) and (b) 

Last Answer : (D) Both (a) and (b) 

The eccentricity (e) of a hollow circular column, external diameter 25 cm, internal diameter 15 cm for an eccentric load 100 t for non-development of tension, is (A) 2.75 cm (B) 3.00 cm (C) 3.50 cm (D) 4.25 cm

Description : The eccentricity (e) of a hollow circular column, external diameter 25 cm, internal diameter 15 cm  for an eccentric load 100 t for non-development of tension, is  (A) 2.75 cm  (B) 3.00 cm  (C) 3.50 cm  (D) 4.25 cm

Last Answer : (D) 4.25 cm

Pick out the wrong statement. (A) Surface tension of a substance vanishes at critical point, as there is no distinction between liquid and vapour phases at its critical point (B) Entropy of a system decreases with the evolution of heat (C) Change of internal energy is negative for exothermic reactions (D) The eccentric factor for all materials is always more than one

Description : Pick out the wrong statement. (A) Surface tension of a substance vanishes at critical point, as there is no distinction between liquid and vapour phases at its critical point (B) Entropy of ... is negative for exothermic reactions (D) The eccentric factor for all materials is always more than one

Last Answer : (D) The eccentric factor for all materials is always more than one

0 Pick up the correct statement from the following: (A) The point through which the resultant of the shear stresses passes is known as shear centre(B) In the standard rolled channels, the shear centre is on the horizontal line passing through and away from the C.G. beyond web (C) In equal angles, the shear centre is on the horizontal plane and away from the C.G., outside of the leg projection (D) All the above

Description : 0 Pick up the correct statement from the following: (A) The point through which the resultant of the shear stresses passes is known as shear centre (B) In the standard rolled channels, the shear centre ... horizontal plane and away from the C.G., outside of the leg projection (D) All the above

Last Answer : (D) All the above

The graphical representation of variation of axial load on y axis and position of cross section along x axis is called as _____ (a) Bending moment diagram (b) Shear force diagram (c) Stress-strain diagram (d) Trust diagram

Description : The graphical representation of variation of axial load on y axis and position of cross section along x axis is called as _____ (a) Bending moment diagram (b) Shear force diagram (c) Stress-strain diagram (d) Trust diagram

Last Answer : (d) Trust diagram

Pick up the correct statement from the following: (A) The moment of inertia is calculated about the axis about which bending takes place (B) If tensile stress is less than axial stress, the section experiences compressive stress (C) If tensile stress is equal to axial stress, the section experiences compressive stress (D) All the above

Description : Pick up the correct statement from the following:  (A) The moment of inertia is calculated about the axis about which bending takes place  (B) If tensile stress is less than axial ... tensile stress is equal to axial stress, the section experiences compressive stress  (D) All the above 

Last Answer : (D) All the above 

The ratio of lateral strain to axial strain of a homogeneous material, is known (A) Yield ratio (B) Hooke's ratio (C) Poisson's ratio (D) Plastic ratio

Description : The ratio of lateral strain to axial strain of a homogeneous material, is known  (A) Yield ratio  (B) Hooke's ratio  (C) Poisson's ratio  (D) Plastic ratio 

Last Answer : (C) Poisson's ratio 

The law which states, "Within elastic limits strain produced is proportional to the stress producing it", is known as (A) Bernoulli's law (B) Stress law (C) Hooke's law (D) Poisson's law

Description : The law which states, "Within elastic limits strain produced is proportional to the stress producing  it", is known as  (A) Bernoulli's law  (B) Stress law  (C) Hooke's law  (D) Poisson's law

Last Answer : (C) Hooke's law 

If a material has identical properties in all directions, it is called (a) Elastic (b) Plastic (c) Isotropic (d) Homogeneous

Description : If a material has identical properties in all directions, it is called (a) Elastic (b) Plastic (c) Isotropic (d) Homogeneous

Last Answer : (c) Isotropic

The materials which have the same elastic properties in all directions, are called (A) Isotropic (B) Brittle (C) Homogeneous (D) Hard

Description : The materials which have the same elastic properties in all directions, are called  (A) Isotropic  (B) Brittle  (C) Homogeneous  (D) Hard 

Last Answer : (A) Isotropic 

Consider the following salient points in a stress-strain curve of a mild steel bar: 1. Yield point 2. Braking point 3. Yield plateau 4 . Proportionality limit 5. Ultimate point The correct sequence in which they occur while testing the mild steel bar in tension from initial zero strain to failure is (a) 4, 1, 2, 3 and 5 (b) 1, 4, 3, 5 and 2 (c) 4, 1, 3, 5 and 2 (d) 1, 4, 2, 3 and 5

Description : Consider the following salient points in a stress-strain curve of a mild steel bar: 1. Yield point 2. Braking point 3. Yield plateau 4 . Proportionality limit 5. Ultimate point The correct sequence in which they occur while testing the mild ... , 5 and 2 (c) 4, 1, 3, 5 and 2 (d) 1, 4, 2, 3 and 5

Last Answer : (c) 4, 1, 3, 5 and 2

In a simple bending theory, one of the assumption is that the material of the beam is isotropic. This assumption means that the a. normal stress remains constant in all directions b. normal stress varies linearly in the material c. elastic constants are same in all the directions d. elastic constants varies linearly in the material

Description : In a simple bending theory, one of the assumption is that the material of the beam is isotropic. This assumption means that the a. normal stress remains constant in all directions b. ... c. elastic constants are same in all the directions d. elastic constants varies linearly in the material

Last Answer : c. elastic constants are same in all the directions

What is the maximum value of deforming force up to which a material shows elastic property and above which the material loses it? (1) Elasticity (2) Strain (3) Elastic Limit (4) Stress

Description : What is the maximum value of deforming force up to which a material shows elastic property and above which the material loses it? (1) Elasticity (2) Strain (3) Elastic Limit (4) Stress

Last Answer : (4) Elastic Limit Explanation: The Maximum Extent to which a solid may be stretched without permanent alteration of size or shape.

Pick up the correct statement from the following: (A) To an agriculturist, soil is the substance existing on the earth's surface, which grows and develops plants (B) To a geologist, soil is the material in a relatively thin surface zone within which roots occur, and rest of the crust is termed as rock irrespective of hardness (C) To an engineer, soil is the unaggregated and uncemented deposits of minerals and organic particles covering the earth's crust (D) All the above

Description : Pick up the correct statement from the following: (A) To an agriculturist, soil is the substance existing on the earth's surface, which grows and develops plants (B) To a geologist, soil ... and uncemented deposits of minerals and organic particles covering the earth's crust (D) All the above

Last Answer : (D) All the above

When stress is increased beyond elastic limit and material is permanently changed this property is a) Permanent stress b) Elasticity c) Yield strength d) Plasticity

Description : When stress is increased beyond elastic limit and material is permanently changed this property is a) Permanent stress b) Elasticity c) Yield strength d) Plasticity

Last Answer : d) Plasticity

What is the maximum value of deforming force upto which a material shows elastic property and above which the material loses it? (1) Elasticity (2) Strain (3) Elastic Limit (4) Stress

Description : What is the maximum value of deforming force upto which a material shows elastic property and above which the material loses it? (1) Elasticity (2) Strain (3) Elastic Limit (4) Stress

Last Answer : (3) Elastic Limit Explanation: The Maximum Extent to which a solid may be stretched without permanent alteration of size or shape.

Total strain energy theory for the failure of a material at elastic limit, is known (A) Guest's or Trecas' theory (B) St. Venant's theory (C) Rankine's theory (D) Haig's theory

Description : Total strain energy theory for the failure of a material at elastic limit, is known  (A) Guest's or Trecas' theory  (B) St. Venant's theory  (C) Rankine's theory  (D) Haig's theory 

Last Answer : (D) Haig's theory 

Maximum strain theory for the failure of a material at the elastic limit, is known as (A) Guest's or Trecas' theory (B) St. Venant's theory (C) Rankine's theory (D) Haig's theory

Description : Maximum strain theory for the failure of a material at the elastic limit, is known as  (A) Guest's or Trecas' theory  (B) St. Venant's theory  (C) Rankine's theory  (D) Haig's theory 

Last Answer : (B) St. Venant's theory

Which of the following formulae is used to calculate tangential stress, when a member is subjected to stress in mutually perpendicular axis and accompanied by a shear stress? a. [(σ x – σ y )/2 ]sin θ – τ cos 2θ b. [(σ x – σ y )/2 ]– τ cos 2θ c. [(σ x – σ y )/2 ]sin θ – τ 2 cos θ d. None of the above

Description : Which of the following formulae is used to calculate tangential stress, when a member is subjected to stress in mutually perpendicular axis and accompanied by a shear stress? a. [(σ x - σ y )/2 ]sin θ - τ cos 2θ b. [(σ x - ... τ cos 2θ c. [(σ x - σ y )/2 ]sin θ - τ 2 cos θ d. None of the above

Last Answer : c. [(σ x – σ y )/2 ]sin θ – τ 2 cos θ

Visco-elastic behaviour exhibited by plastics is a __________ like behaviour. (A) Solid (B) Liquid (C) Combination of solid & liquid (D) Neither solid nor liquid

Description : Visco-elastic behaviour exhibited by plastics is a __________ like behaviour. (A) Solid (B) Liquid (C) Combination of solid & liquid (D) Neither solid nor liquid

Last Answer : (C) Combination of solid & liquid

The spring operates (A) Within plastic limit (B) Within elastic limit (C) Within elasto-plastic limit (D) Within visco-elastic limit

Description : The spring operates (A) Within plastic limit (B) Within elastic limit (C) Within elasto-plastic limit (D) Within visco-elastic limit

Last Answer : (B) Within elastic limit

The force which develops in a pressure conduit supported on trestles, is (A) Tension (B) Compression (C) Temperature stress (D) Flexural stress

Description : The force which develops in a pressure conduit supported on trestles, is  (A) Tension  (B) Compression  (C) Temperature stress  (D) Flexural stress

Last Answer : (D) Flexural stress

A material no longer behaves elastically beyond (A) Plastic limit (B) Limiting load (C) Elastic limit (D) Breaking load

Description : A material no longer behaves elastically beyond (A) Plastic limit (B) Limiting load (C) Elastic limit (D) Breaking load

Last Answer : (C) Elastic limit

As the elastic limit reaches, tensile strain (A) Increases more rapidly (B) Decreases more rapidly (C) Increases in proportion to the stress (D) Decreases in proportion to the stress

Description : As the elastic limit reaches, tensile strain (A) Increases more rapidly (B) Decreases more rapidly (C) Increases in proportion to the stress (D) Decreases in proportion to the stress

Last Answer : (A) Increases more rapidly

Pick out the wrong statement. (A) The equivalent stiffness of two springs (of equal stiffness 'S') in series is S/2 while in parallel is 2S (B) For a helical spring, deflection is proportional to D3(D = mean coil diameter) or d4(d = wire diameter) (C) Crushing load or columns is less than the buckling load (D) Modulus of resilience is proportional to (stress at elastic limit)2

Description : Pick out the wrong statement. (A) The equivalent stiffness of two springs (of equal stiffness 'S') in series is S/2 while in parallel is 2S (B) For a helical spring, deflection is ... is less than the buckling load (D) Modulus of resilience is proportional to (stress at elastic limit)2

Last Answer : (C) Crushing load or columns is less than the buckling load

Pick up the incorrect statement from the following. The intensity of horizontal shear stress at the elemental part of a beam section, is directly proportional to (A) Shear force (B) Area of the section (C) Distance of the C.G. of the area from its neutral axis (D) Moment of the beam section about its neutral axis

Description : Pick up the incorrect statement from the following. The intensity of horizontal shear stress at the elemental part of a beam section, is directly proportional to (A) Shear force (B) Area of the section ... . of the area from its neutral axis (D) Moment of the beam section about its neutral axis

Last Answer : Answer: Option D

Struts are load carrying members of a frame structure which are subjected to (A) Axial tension loads (B) Axial compressive loads (C) Torsional loads (D) Transverse loads

Description : Struts are load carrying members of a frame structure which are subjected to  (A) Axial tension loads  (B) Axial compressive loads  (C) Torsional loads  (D) Transverse loads 

Last Answer : (B) Axial compressive loads 

Ties are load carrying members of a frame, which are subjected to (A) Transverse loads (B) Axial tension loads (C) Axial compressive loads (D) Torsional loads

Description : Ties are load carrying members of a frame, which are subjected to  (A) Transverse loads  (B) Axial tension loads  (C) Axial compressive loads  (D) Torsional loads 

Last Answer : (B) Axial tension loads 

The stress at which extension of a material takes place more quickly as compared to the increase in load, is called (A) Elastic point (B) Plastic point (C) Breaking point (D) Yielding point

Description : The stress at which extension of a material takes place more quickly as compared to the increase in load, is called (A) Elastic point (B) Plastic point (C) Breaking point (D) Yielding point

Last Answer : (D) Yielding point

The statement : stress is proportional to strain, i.e. the Hooke’s law holds good upto (a) Elastic Limit (b) Proportional Limit (c) Plastic Limit (d) Yield point

Description : The statement : stress is proportional to strain, i.e. the Hooke’s law holds good upto (a) Elastic Limit (b) Proportional Limit (c) Plastic Limit (d) Yield point

Last Answer : (b) Proportional Limit

The stress-strain relation of the Newtonian fluid is (A) Linear (B) Parabolic (C) Hyperbolic (D) Inverse type

Description : The stress-strain relation of the Newtonian fluid is (A) Linear (B) Parabolic (C) Hyperbolic (D) Inverse type

Last Answer : Answer: Option A

Pick up the correct statement from the following: (A) The directions of plumb lines suspended at different points in a survey are not strictly parallel (B) In surveys of small extent, the effect of curvature may be ignored and the level surface of the earth is assumed as horizontal (C) In surveys of large extent, the effect of curvature of the earth must be considered (D) All the above

Description : Pick up the correct statement from the following: (A) The directions of plumb lines suspended at different points in a survey are not strictly parallel (B) In surveys of small extent, the effect of ... of large extent, the effect of curvature of the earth must be considered (D) All the above

Last Answer : (D) All the above

Woodruff key permits _____ movement b/w shaft and the hub. a) Axial b) Radial c) Eccentric d) None of the listed

Description : Woodruff key permits _____ movement b/w shaft and the hub. a) Axial b) Radial c) Eccentric d) None of the listed

Last Answer : b) Radial

Woodruff key permits _____ movement b/w shaft and the hub. a) Axial b) Radial c) Eccentric d) None of the listed

Description : Woodruff key permits _____ movement b/w shaft and the hub. a) Axial b) Radial c) Eccentric d) None of the listed

Last Answer : b) Radial

Shear strain energy theory for the failure of a material at elastic limit, is due to (A) Rankine (B) Guest or Trecas (C) St. Venant (D) Von Mises

Description : Shear strain energy theory for the failure of a material at elastic limit, is due to  (A) Rankine  (B) Guest or Trecas  (C) St. Venant  (D) Von Mises

Last Answer : (D) Von Mises

Select the correct statement (A) Weber's number is the ratio of inertia force to elastic force. (B) Weber's number is the ratio of gravity force to surface tension force. (C) Weber's number is the ratio of viscous force to pressure force. (D) Weber's number is the ratio of inertia force to surface tension force.

Description : Select the correct statement (A) Weber's number is the ratio of inertia force to elastic force. (B) Weber's number is the ratio of gravity force to surface tension force. (C) Weber's number ... force to pressure force. (D) Weber's number is the ratio of inertia force to surface tension force.

Last Answer : Answer: Option D

The resultant axial force on bolt depends upon (A) Initial tension (B) External applied load (C) Stiffness of bolt and parts held by bolt (D) All three factors

Description : The resultant axial force on bolt depends upon (A) Initial tension (B) External applied load (C) Stiffness of bolt and parts held by bolt (D) All three factors

Last Answer : (D) All three factors