The capillary rise of water (A) Depends upon the force responsible (B) Increases as the size of the soil particles increases (C) Decreases as the size of the soil particles decreases (D) Is less in wet soil than in dry soil

The capillary rise of water
(A) Depends upon the force responsible
(B) Increases as the size of the soil particles increases
(C) Decreases as the size of the soil particles decreases
(D) Is less in wet soil than in dry soil
by

1 Answer

Answer :

(A) Depends upon the force responsible
by

Related questions

Select the correct statement. (A) Unit weight of dry soil is greater than unit weight of wet soil (B) For dry soils, dry unit weight is less than total unit weight (C) Unit weight of soil increases due to submergence in water (D) Unit weight of soil decreases due to submergence in water

Description : Select the correct statement. (A) Unit weight of dry soil is greater than unit weight of wet soil (B) For dry soils, dry unit weight is less than total unit weight (C) Unit weight of soil increases due to submergence in water (D) Unit weight of soil decreases due to submergence in water

Last Answer : Answer: Option D

The internal molecular attraction of a soil, the cohesion (A) Decreases as the moisture content increases (B) Increases as the moisture content decreases (C) Is more in well compacted clays (D) Depends upon the external applied load

Description : The internal molecular attraction of a soil, the cohesion (A) Decreases as the moisture content increases (B) Increases as the moisture content decreases (C) Is more in well compacted clays (D) Depends upon the external applied load

Last Answer : Answer: Option C

The specific yield of soil depends upon (A) Compaction of stratum (B) Distribution of pores (C) Shape and size of particles (D) All the above

Description : The specific yield of soil depends upon (A) Compaction of stratum (B) Distribution of pores (C) Shape and size of particles (D) All the above

Last Answer : (D) All the above

The bearing capacity of a soil depends upon (A) Size of the particles (B) Shape of the particles (C) Cohesive properties of particles (D) All the above

Description : The bearing capacity of a soil depends upon (A) Size of the particles (B) Shape of the particles (C) Cohesive properties of particles (D) All the above

Last Answer : Answer: Option D

Infiltration capacity of soil depends upon (A) Number of voids present in the soil (B) Shape and size of soil particles (C) Arrangement of soil particles (D) All the above

Description : Infiltration capacity of soil depends upon (A) Number of voids present in the soil (B) Shape and size of soil particles (C) Arrangement of soil particles (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Sand consists of coarse particles of silica formed due to the disintegration of rocks (B) The grains of sand are not affected by frost (C) Sand beds are permeable and do not allow water to rise up between pores due to capillary action (D) All the above

Description : Pick up the correct statement from the following: (A) Sand consists of coarse particles of silica formed due to the disintegration of rocks (B) The grains of sand are not affected by frost (C) Sand ... and do not allow water to rise up between pores due to capillary action (D) All the above

Last Answer : Answer: Option D

For the flow of gases through a capillary, with increase in temperature, the permeability __________ as per Knudsen law. (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B); depends on the gas

Description : For the flow of gases through a capillary, with increase in temperature, the permeability __________ as per Knudsen law. (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B); depends on the gas

Last Answer : (A) Increases

The shearing strength of a cohesion-less soil depends upon (A) Dry density (B) Rate of loading (C) Confining pressure (D) Nature of loading

Description : The shearing strength of a cohesion-less soil depends upon (A) Dry density (B) Rate of loading (C) Confining pressure (D) Nature of loading

Last Answer : Answer: Option C

In case of grinding in a ball mill (A) Wet grinding achieves a finer product size than dry grinding (B) Its capacity decreases with increasing fineness of the products (C) Grinding cost and power requirement increases with increasing fineness of the products (D) All (A), (B) and (C)

Description : In case of grinding in a ball mill (A) Wet grinding achieves a finer product size than dry grinding (B) Its capacity decreases with increasing fineness of the products (C) Grinding cost and power requirement increases with increasing fineness of the products (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The field capacity of a soil depends upon a. Capillary tension in soil b. Porosity of soil c. Both (a) and (b) d. Neither (a) nor (b)

Description : The field capacity of a soil depends upon a. Capillary tension in soil b. Porosity of soil c. Both (a) and (b) d. Neither (a) nor (b)

Last Answer : c. Both (a) and (b)

Pick up the incorrect statement from the following: (A) Compaction has no effect on the structure of a soil (B) Permeability decreases with increase in the dry density of a compacted soil (C) A wet side compacted soil is more compressible than a dry side compacted soil (D) Dry side compaction soils swell more when given access to moisture

Description : Pick up the incorrect statement from the following: (A) Compaction has no effect on the structure of a soil (B) Permeability decreases with increase in the dry density of a compacted soil (C) ... a dry side compacted soil (D) Dry side compaction soils swell more when given access to moisture

Last Answer : (A) Compaction has no effect on the structure of a soil

The velocity of the liquid flowing through the divergent portion of a Venturimeter (A) Remains constant (B) Increases (C) Decreases (D) Depends upon mass of liquid

Description : The velocity of the liquid flowing through the divergent portion of a Venturimeter (A) Remains constant (B) Increases (C) Decreases (D) Depends upon mass of liquid

Last Answer : Answer: Option C

The pressure of the liquid flowing through the divergent portion of a Venturimeter (A) Remains constant (B) Increases (C) Decreases (D) Depends upon mass of liquid

Description : The pressure of the liquid flowing through the divergent portion of a Venturimeter (A) Remains constant (B) Increases (C) Decreases (D) Depends upon mass of liquid

Last Answer : Answer: Option C

The maximum dry density upto which any soil can be compacted depends upon (A) Moisture content only (B) Amount of compaction energy only (C) Both moisture content and amount of compaction energy (D) None of the above

Description : The maximum dry density upto which any soil can be compacted depends upon (A) Moisture content only (B) Amount of compaction energy only (C) Both moisture content and amount of compaction energy (D) None of the above

Last Answer : (C) Both moisture content and amount of compaction energy

Water logging of soil makes it physiologically dry because (a) this condition does not allow the capillary force to work (b) this condition does not allow oxygen to enter the soil(c) both (a) and (b) (d) none of these

Description : Water logging of soil makes it physiologically dry because (a) this condition does not allow the capillary force to work (b) this condition does not allow oxygen to enter the soil(c) both (a) and (b) (d) none of these

Last Answer : (b) this condition does not allow oxygen to enter the soil

Water logging of soil makes it physiologically dry because- (a) This condition does not allow the capillary force to work b) this condition does not allow oxygen to enter the soil C) both (a) and (b) d) none of these

Description : Water logging of soil makes it physiologically dry because- (a) This condition does not allow the capillary force to work b) this condition does not allow oxygen to enter the soil C) both (a) and (b) d) none of these 

Last Answer : b) this condition does not allow oxygen to enter the soil

Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids (C) Particles movement from higher concentration to lower concentration takes place in diffusion process (D) According to Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Description : Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids ( ... Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Last Answer : (B) Molecular diffusion in solid is much faster than that in liquids

Thermal conductivities of most of the liquids __________ with rise in temperature.(A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the liquid

Description : Thermal conductivities of most of the liquids __________ with rise in temperature. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the liquid

Last Answer : (B) Decreases

Work index is the gross energy (kWh/tonne of feed) necessary to reduce a very large feed to such a size that 80% of product particles will pass through a 0.1 mm screen. The value of work index determined for wet grinding should be multiplied with __________ to get the same for dry grinding. (A) 1.0 (B) 0.5 (C) 1.34 (D) 4.34

Description : Work index is the gross energy (kWh/tonne of feed) necessary to reduce a very large feed to such a size that 80% of product particles will pass through a 0.1 mm screen. The value of work index determined for wet grinding should ... to get the same for dry grinding. (A) 1.0 (B) 0.5 (C) 1.34 (D) 4.34

Last Answer : (C) 1.34

Select the incorrect statement. Effective angle of shearing resistance (A) Increases as the size of particles increases (B) Increases as the soil gradation improves (C) Is limited to a maximum value of 45° (D) Is rarely more than 30° for fine grained soil

Description : Select the incorrect statement. Effective angle of shearing resistance (A) Increases as the size of particles increases (B) Increases as the soil gradation improves (C) Is limited to a maximum value of 45° (D) Is rarely more than 30° for fine grained soil

Last Answer : (C) Is limited to a maximum value of 45°

If there is a circular hole in a metal plate, what happens to the radius of the hole when the plate is heated? (1) Increases (2) Decreases (3) Unchanged (4) Depends upon the metal

Description : If there is a circular hole in a metal plate, what happens to the radius of the hole when the plate is heated? (1) Increases (2) Decreases (3) Unchanged (4) Depends upon the metal

Last Answer : (1) Increases Explanation: When a metal plate with a circular hole at its centre is heated, definitely along with the areal expansion of the plate the diameter of the circular hole also increases. Using ... of expansions, we find that the hole radius increases at the same linear rate as the metal.

fter storage, strength of cement a) Decreases* b) Increases c) Remains same d) Depends upon the type of cement

Description : fter storage, strength of cement a) Decreases* b) Increases c) Remains same d) Depends upon the type of cement

Last Answer : a) Decreases*

If there is a circular hole in a metal plate, what happens to the radius of the hole when the plate is heated? (1) Increases (2) Decreases (3) Unchanged (4) Depends upon the metal

Description : If there is a circular hole in a metal plate, what happens to the radius of the hole when the plate is heated? (1) Increases (2) Decreases (3) Unchanged (4) Depends upon the metal

Last Answer : Increases

Select the incorrect statement. (A) Bearing capacity of a soil depends upon the amount and direction of load (B) Bearing capacity of a soil depends on the type of soil (C) Bearing capacity of a soil depends upon shape and size of footing (D) Bearing capacity of a soil is independent of rate of loading

Description : Select the incorrect statement. (A) Bearing capacity of a soil depends upon the amount and direction of load (B) Bearing capacity of a soil depends on the type of soil (C) Bearing capacity of a ... upon shape and size of footing (D) Bearing capacity of a soil is independent of rate of loading

Last Answer : Answer: Option A

The uniformity of a gas fluidised bed depends upon the __________ of the solid particles. (A) Size (B) Surface properties (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The uniformity of a gas fluidised bed depends upon the __________ of the solid particles. (A) Size (B) Surface properties (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

A glass tube of smaller diameter is used while performing an experiment for the capillary rise of water because (A) It is easier to see through the glass tube (B) Glass tube is cheaper than a metallic tube (C) It is not possible to conduct this experiment with any other tube (D) All of the above

Description : A glass tube of smaller diameter is used while performing an experiment for the capillary rise of water because (A) It is easier to see through the glass tube (B) Glass tube is cheaper than a metallic ... (C) It is not possible to conduct this experiment with any other tube (D) All of the above

Last Answer : Answer: Option A

260 g of wet soil was taken in a pycnometer jar of weight 400 g in order to find the moisture content in the soil, with specific gravity of soil particles 2.75. The weight of soil and remaining water filled in pycnometer without air bubbles was 1415 g and the weight of pycnometer filled with water alone was 1275 g. The moisture content in the soil is (A) 24.2 % (B) 18.2 % (C) 53.8 % (D) None of these

Description : 260 g of wet soil was taken in a pycnometer jar of weight 400 g in order to find the moisture content in the soil, with specific gravity of soil particles 2.75. The weight of soil and remaining water filled in pycnometer without air ... is (A) 24.2 % (B) 18.2 % (C) 53.8 % (D) None of these

Last Answer : Answer: Option B

An excess of flaky particles in concrete aggregates (A) Decreases the workability (B) Increases the quantity of water and sand (C) More than 15% are not desirable (D) All the above

Description : An excess of flaky particles in concrete aggregates (A) Decreases the workability (B) Increases the quantity of water and sand (C) More than 15% are not desirable (D) All the above

Last Answer : Answer: Option D

If the grain size of soil increases (A) Surface area decreases (B) Specific retention decreases (C) Water supply in well increases (D) All the above

Description : If the grain size of soil increases (A) Surface area decreases (B) Specific retention decreases (C) Water supply in well increases (D) All the above

Last Answer : Answer: Option D

The maximum dry density to which a soil may be compacted to depends upon a) Soil water content * b) The process of compaction c) The voids ratio d) Is independent of the type of soil

Description : The maximum dry density to which a soil may be compacted to depends upon a) Soil water content * b) The process of compaction c) The voids ratio d) Is independent of the type of soil

Last Answer : a) Soil water content *

raft increases with increase in forward speed for most of the implement, mainly due to a) More rapid acceleration of any soil particles that is moved appreciably b) More working width c) Increased working depth d) Draft decreases with increase in speed of implement

Description : raft increases with increase in forward speed for most of the implement, mainly due to a) More rapid acceleration of any soil particles that is moved appreciably b) More working width c) Increased working depth d) Draft decreases with increase in speed of implement

Last Answer : a) More rapid acceleration of any soil particles that is moved appreciably

The capillary rise at 20°C in a clean glass tube of 1 mm bore containing water is approximately (A) 5 mm (B) 10 mm (C) 20 mm (D) 30 mm

Description : The capillary rise at 20°C in a clean glass tube of 1 mm bore containing water is approximately (A) 5 mm (B) 10 mm (C) 20 mm (D) 30 mm

Last Answer : Answer: Option D

Minimum thickness of a layer of fine sand required to cut off capillary rise of water completely, should be (A) 40 cm(B) 52 cm (C) 64 cm (D) 76 cm

Description : Minimum thickness of a layer of fine sand required to cut off capillary rise of water completely, should be (A) 40 cm (B) 52 cm (C) 64 cm (D) 76 cm

Last Answer : Answer: Option D

The consolidation time for soils (A) Increases with increasing compressibility (B) Decreases with increasing permeability (C) Increases rapidly with increasing size of soil mass (D) All the above

Description : The consolidation time for soils (A) Increases with increasing compressibility (B) Decreases with increasing permeability (C) Increases rapidly with increasing size of soil mass (D) All the above

Last Answer : Answer: Option D

Pick out the wrong statement pertaining to solvent extraction of oil. Rate of extraction (A) Decreases with decrease of thickness of the flakes(B) Increases with the increasing flake size keeping the flake thicknessconstant(C) Increases considerably with the rise of temperature(D) Decreases as the moisture content of flakes increases

Description : Pick out the wrong statement pertaining to solvent extraction of oil. Rate of extraction (A) Decreases with decrease of thickness of the flakes (B) Increases with the increasing flake size ... considerably with the rise of temperature (D) Decreases as the moisture content of flakes increases

Last Answer : (D) Decreases as the moisture content of flakes increases

With the rise of temperature, the sensitivity of a bubble tube (A) Decreases(B) Increases (C) Remains unaffected (D) None of the above

Description : With the rise of temperature, the sensitivity of a bubble tube (A) Decreases (B) Increases (C) Remains unaffected (D) None of the above

Last Answer : (A) Decreases

Due to a rise in temperature, the viscosity and the unit weight of the percolating fluid are reduced to 60% and 90% respectively. If other things remain constant, the coefficient of permeability (A) Increases by 25 % (B) Increases by 50 % (C) Increases by 33.3 % (D) Decreases by 33.3 %

Description : Due to a rise in temperature, the viscosity and the unit weight of the percolating fluid are reduced to 60% and 90% respectively. If other things remain constant, the coefficient of permeability (A) Increases by 25 % (B) Increases by 50 % (C) Increases by 33.3 % (D) Decreases by 33.3 %

Last Answer : (B) Increases by 50 %

The dynamic viscosity of gases __________ with rise in temperature. (A) Remain unaffected (B) Increases (C) Decreases (D) None of these

Description : The dynamic viscosity of gases __________ with rise in temperature. (A) Remain unaffected (B) Increases (C) Decreases (D) None of these

Last Answer : Answer: Option B

Dynamic viscosity of most of the liquids with rise in temperature (A) Increases (B) Decreases (C) Remain unaffected (D) Unpredictable

Description : Dynamic viscosity of most of the liquids with rise in temperature (A) Increases (B) Decreases (C) Remain unaffected (D) Unpredictable

Last Answer : Answer: Option B

The dynamic viscosity of the liquid __________ with rise in temperature. (A) Remain unaffected (B) Increases (C) Decreases (D) None of these

Description : The dynamic viscosity of the liquid __________ with rise in temperature. (A) Remain unaffected (B) Increases (C) Decreases (D) None of these

Last Answer : Answer: Option C

Dynamic viscosity of most of the gases with rise in temperature (A) Increases (B) Decreases (C) Remain unaffected (D) Unpredictable

Description : Dynamic viscosity of most of the gases with rise in temperature (A) Increases (B) Decreases (C) Remain unaffected (D) Unpredictable

Last Answer : Answer: Option A

Wet grinding in a revolving mill __________ as compared to dry grinding. (A) Gives less wear on chamber walls (B) Requires more energy (C) Increases capacity (D) Complicates handling of the product

Description : Wet grinding in a revolving mill __________ as compared to dry grinding. (A) Gives less wear on chamber walls (B) Requires more energy (C) Increases capacity (D) Complicates handling of the product

Last Answer : (C) Increases capacity

Production rate __________ with increased fineness, with a given energy input to the size reduction machine. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the machine

Description : Production rate __________ with increased fineness, with a given energy input to the size reduction machine. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the machine

Last Answer : (A) Decreases

With decrease in the grain size of a material, its creep resistance (A) Increases (B) Decreases (C) Remain constant (D) Either (A) or (B); depends on the material

Description : With decrease in the grain size of a material, its creep resistance (A) Increases (B) Decreases (C) Remain constant (D) Either (A) or (B); depends on the material

Last Answer : (C) Remain constant

Pick up the incorrect statement from the following: (A) The smaller the size of the pores, the higher the water can rise above the water table (B) Below the water table, the pore water may be static (C) The hydrostatic pressure depends on the depth below the water level (D) None of these

Description : Pick up the incorrect statement from the following: (A) The smaller the size of the pores, the higher the water can rise above the water table (B) Below the water table, the pore water may be static (C) The hydrostatic pressure depends on the depth below the water level (D) None of these

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) If ports are closed, the dry intake towers will not have any water (B) Even if ports are closed, the wet intake tower will have water filled up to reservoir level (C) No buoyant force acts on wet intake towers (D) All the above

Description : Pick up the correct statement from the following:  (A) If ports are closed, the dry intake towers will not have any water  (B) Even if ports are closed, the wet intake tower will have water ... to reservoir level  (C) No buoyant force acts on wet intake towers  (D) All the above 

Last Answer : (D) All the above 

. With increase in temperature, the electrical conductivity of semiconductors (A) Increases (B) Decreases (C) Remain constant (D) Either (A) or (B), depends on the type of semi-conductor

Description : . With increase in temperature, the electrical conductivity of semiconductors (A) Increases (B) Decreases (C) Remain constant (D) Either (A) or (B), depends on the type of semi-conductor

Last Answer : Option A

The torsion resisting capacity of a given reinforced concrete section. (a) Decreases with decrease in stirrups spacing. (b) Decreases with increase in longitudinal bars. (c) Does not depend upon stirrups and longitudinal steels. (d) Increases with increase in stirrups and longitudinal steels.

Description : The torsion resisting capacity of a given reinforced concrete section. (a) Decreases with decrease in stirrups spacing. (b) Decreases with increase in longitudinal bars. (c) Does not depend upon stirrups and longitudinal steels. (d) Increases with increase in stirrups and longitudinal steels.

Last Answer : (d) Increases with increase in stirrups and longitudinal steels.

The black cotton soil (A) Undergoes volumetric changes (B) Swells excessively when wet (C) Shrinks excessively when dry (D) All the above

Description : The black cotton soil (A) Undergoes volumetric changes (B) Swells excessively when wet (C) Shrinks excessively when dry (D) All the above

Last Answer : Answer: Option D

The vapour pressure exerted by the moisture contained in a wet solid depends upon the (A) Nature of the moisture (B) Temperature (C) Nature of the solid (D) All (A), (B) and (C)

Description : The vapour pressure exerted by the moisture contained in a wet solid depends upon the (A) Nature of the moisture (B) Temperature (C) Nature of the solid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)