The work done in an adiabatic change in a particular gas depends upon changes in the __________ only. (A) Temperature (B) Specific heat (C) Volume (D) Pressure

The work done in an adiabatic change in a particular gas depends upon changes in the __________ only.
(A) Temperature
(B) Specific heat
(C) Volume
(D) Pressure
by

1 Answer

Answer :

(A) Temperature
by

Related questions

Internal energy of a gas obeying Van-Der-Waals equation of state, [p + (a/v2)] (V - b) = RT, depends upon its (A) Pressure & temperature (B) Pressure & specific volume (C) Temperature & specific volume (D) Temperature only

Description : Internal energy of a gas obeying Van-Der-Waals equation of state, [p + (a/v2)] (V - b) = RT, depends upon its (A) Pressure & temperature (B) Pressure & specific volume (C) Temperature & specific volume (D) Temperature only

Last Answer : (A) Pressure & temperature

For an ideal gas, the internal energy depends upon its __________ only. (A) Molecular size (B) Temperature (C) Volume (D) Pressure

Description : For an ideal gas, the internal energy depends upon its __________ only. (A) Molecular size (B) Temperature (C) Volume (D) Pressure

Last Answer : (B) Temperature

Work done in an adiabatic process between a given pair of end states depends on  (a) the end states only  (b) particular adiabatic process  (c) the value of index n  (d) the value of heattransferred  (e) mass of the system.

Description : Work done in an adiabatic process between a given pair of end states depends on  (a) the end states only  (b) particular adiabatic process  (c) the value of index n  (d) the value of heattransferred  (e) mass of the system.

Last Answer : Answer : a

Work done in an adiabatic process between two states depends on the (A) Rate of heat transmission (B) Initial state only (C) End states only (D) None of these

Description : Work done in an adiabatic process between two states depends on the (A) Rate of heat transmission (B) Initial state only (C) End states only (D) None of these

Last Answer : C) End states only

Pick out the wrong statement. (A) The conversion for a gas phase reaction increases with decrease in pressure, if there is an increase in volume accompanying the reaction (B) With increase in temperature, the equilibrium constant increases for an exothermic reaction (C) The equilibrium constant of a reaction depends upon temperature only (D) The conversion for a gas phase reaction increases with increase in pressure, if there is a decrease in volume accompanying the reaction

Description : Pick out the wrong statement. (A) The conversion for a gas phase reaction increases with decrease in pressure, if there is an increase in volume accompanying the reaction (B) With ... phase reaction increases with increase in pressure, if there is a decrease in volume accompanying the reaction

Last Answer : (B) With increase in temperature, the equilibrium constant increases for an exothermic reaction

In reactions involving solids and liquids (where change in volume is negligible), the heat of reaction at constant pressure as compared to that at constant volume is (A) More (B) Less (C) Same (D) Unpredictable; depends on the particular reaction

Description : In reactions involving solids and liquids (where change in volume is negligible), the heat of reaction at constant pressure as compared to that at constant volume is (A) More (B) Less (C) Same (D) Unpredictable; depends on the particular reaction

Last Answer : (C) Same

An adiabatic process is one in which  A.no heat enters or leaves the gas  B.the temperature of the gas changes  C.the change in internal energy is equal to the mechanical workdone  D.all of the above

Description : An adiabatic process is one in which  A.no heat enters or leaves the gas  B.the temperature of the gas changes  C.the change in internal energy is equal to the mechanical workdone  D.all of the above

Last Answer : Answer: D

The internal energy of a gas obeying P (V - b) RT (where, b is a positive constant and has a constant Cv ), depends upon its (A) Pressure (B) Volume (C) Temperature (D) All (A), (B) & (C)

Description : The internal energy of a gas obeying P (V - b) RT (where, b is a positive constant and has a constant Cv ), depends upon its (A) Pressure (B) Volume (C) Temperature (D) All (A), (B) & (C)

Last Answer : (C) Temperature

Enthalpy of a gas depends upon its (A) Temperature (B) Mass (C) Volume (D) Pressure

Description : Enthalpy of a gas depends upon its (A) Temperature (B) Mass (C) Volume (D) Pressure

Last Answer : (A) Temperature

Which of the following diagramInternal energy is equal to the heat absorbed in case of a/an __________ process. (A) Constant volume (B) Polytropic (C) Adiabatic (D) Constant pressure s does not represent an Otto cycle?

Description : Which of the following diagrams does not represent an Otto cyInternal energy is equal to the heat absorbed in case of a/an __________ process. (A) Constant volume (B) Polytropic (C) Adiabatic (D) Constant pressure cle?

Last Answer : (A) Constant volume

Coke oven gas is a better fuel than blast furnace gas, because of its higher (A) Calorific value, cleanliness and relatively low distribution cost (due to its low specific gravity) (B) Adiabatic flame temperature (C) Heat release rate (thus requiring smaller combustion chamber) (D) All (A), (B) and (C)

Description : Coke oven gas is a better fuel than blast furnace gas, because of its higher (A) Calorific value, cleanliness and relatively low distribution cost (due to its low specific gravity) (B) Adiabatic flame temperature ... release rate (thus requiring smaller combustion chamber) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Extensive properties of a thermodynamic system depend upon the __________ of the system. (A) Specific volume (B) Temperature (C) Mass (D) Pressure

Description : Extensive properties of a thermodynamic system depend upon the __________ of the system. (A) Specific volume (B) Temperature (C) Mass (D) Pressure

Last Answer : (C) Mass

Speed of sound in an ideal gas depends on its (A) Temperature (B) Pressure (C) Specific volume (D) None of these

Description : Speed of sound in an ideal gas depends on its (A) Temperature (B) Pressure (C) Specific volume (D) None of these

Last Answer : (A) Temperature

Efficiency of a heat engine working on Carnot cycle between two temperature levels depends upon the (A) Two temperatures only (B) Pressure of working fluid (C) Mass of the working fluid (D) Mass and pressure both of the working fluid

Description : Efficiency of a heat engine working on Carnot cycle between two temperature levels depends upon the (A) Two temperatures only (B) Pressure of working fluid (C) Mass of the working fluid (D) Mass and pressure both of the working fluid

Last Answer : (A) Two temperatures only

Adiabatic bulk modulus is equal to: A. Υ × P; where Υ: the ratio of the specific heat capacities of the gas, P: pressureB. PressureC. The ratio of the specific heat capacities of the gasD. Υ ⁄ P; where Υ: the ratio of the specific heat capacities of the gas, P: pressure

Description : Adiabatic bulk modulus is equal to:  A. Υ × P; where Υ: the ratio of the specific heat capacities of the gas, P: pressure B. Pressure C. The ratio of the specific heat capacities of the gas D. Υ ⁄ P; where Υ: the ratio of the specific heat capacities of the gas, P: pressure

Last Answer : Υ × P; where Υ: the ratio of the specific heat capacities of the gas, P: pressur

At a given temperature, the volume of a gas dissolved in a solvent __________ with increase in pressure. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Description : At a given temperature, the volume of a gas dissolved in a solvent __________ with increase in pressure. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Last Answer : C) Remains unchanged

Consider the following statements: 1. Mathematically speaking, the time taken for 100% consolidation is infinite. 2. The time factor for a particular average degree of consolidation depends upon the distribution of initial excess hydrostatic pressure. 3. Secondary consolidation obeys Terzaghi’s one-dimensional theory of consolidation. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. Mathematically speaking, the time taken for 100% consolidation is infinite. 2. The time factor for a particular average degree of consolidation depends upon the distribution of initial excess hydrostatic ... 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (b) 1 & 2 only

The work done in isothermal compression compared to that in adiabatic compression will be (A) Less (B) More (C) Same (D) More or less depending upon the extent of work done

Description : The work done in isothermal compression compared to that in adiabatic compression will be (A) Less (B) More (C) Same (D) More or less depending upon the extent of work done

Last Answer : (B) More

The expression, nCv(T2- T1), is for the __________ of an ideal gas. (A) Work done under adiabatic condition (B) Co-efficient of thermal expansion (C) Compressibility (D) None of these

Description : The expression, nCv(T2- T1), is for the __________ of an ideal gas. (A) Work done under adiabatic condition (B) Co-efficient of thermal expansion (C) Compressibility (D) None of these

Last Answer : (A) Work done under adiabatic condition

__________ decreases during adiabatic throttling of a perfect gas. (A) Entropy (B) Temperature (C) Enthalpy (D) Pressure

Description : __________ decreases during adiabatic throttling of a perfect gas. (A) Entropy (B) Temperature (C) Enthalpy (D) Pressure

Last Answer : (D) Pressure

Specific heat of a gas for a reversible adiabatic process is (A) Negative (B) Zero (C) Infinity (D) None of these

Description : Specific heat of a gas for a reversible adiabatic process is (A) Negative (B) Zero (C) Infinity (D) None of these

Last Answer : (B) Zero

Design of waste heat boiler for recovery of waste heat from furnace gases depends upon the(A) Quantity & temperature of waste gas(B) Dust concentration & nature of dust in waste gas(C) Corrosive nature of the waste gas(D) All (A), (B) and (C)

Description : Design of waste heat boiler for recovery of waste heat from furnace gases depends upon the (A) Quantity & temperature of waste gas (B) Dust concentration & nature of dust in waste gas (C) Corrosive nature of the waste gas (D) All (A), (B) and (C)

Last Answer : (B) Dust concentration & nature of dust in waste gas

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

1m3 of an ideal gas at 500 K and 1000 kPa expands reversibly to 5 times its initial volume in an insulated container. If the specific heat capacity (at constant pressure) of the gas is 21 J/mole . K, the final temperature will be (A) 35 K (B) 174 K (C) 274 K (D) 154 K

Description : 1m3 of an ideal gas at 500 K and 1000 kPa expands reversibly to 5 times its initial volume in an insulated container. If the specific heat capacity (at constant pressure) of the gas is 21 J/mole . K, the final temperature will be (A) 35 K (B) 174 K (C) 274 K (D) 154 K

Last Answer : (C) 274 K

Entropy change depends on  (a) heat transfer  (b) mass transfer  (c) change of temperature  (d) thermodynamic state  (e) change of pressure and volume.

Description : Entropy change depends on  (a) heat transfer  (b) mass transfer  (c) change of temperature  (d) thermodynamic state  (e) change of pressure and volume.

Last Answer : Answer : a

At a fixed pressure, the humidity depends upon the partial pressure of vapor in the mixture. Humidity of a vapour free gas is __________ percent. (A) 100 (B) 0 (C) 50 (D) Between 0 and 100

Description : At a fixed pressure, the humidity depends upon the partial pressure of vapor in the mixture. Humidity of a vapour free gas is __________ percent. (A) 100 (B) 0 (C) 50 (D) Between 0 and 100

Last Answer : (B) 0

If the internal energy of an ideal gas decreases by the same amount as the work done by the system, then the (A) Process must be isobaric (B) Temperature must decrease (C) Process must be adiabatic (D) Both (B) and (C)

Description : If the internal energy of an ideal gas decreases by the same amount as the work done by the system, then the (A) Process must be isobaric (B) Temperature must decrease (C) Process must be adiabatic (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

__________ remains constant during the adiabatic cooling of moist air. (A) Wet bulb temperature (B) Dry bulb temperature (C) Relative humidity (D) Specific humidity

Description : __________ remains constant during the adiabatic cooling of moist air. (A) Wet bulb temperature (B) Dry bulb temperature (C) Relative humidity (D) Specific humidity

Last Answer : Option A

The expression, ∆G = nRT. ln(P2/P1), gives the free energy change (A) With pressure changes at constant temperature (B) Under reversible isothermal volume change (C) During heating of an ideal gas (D) During cooling of an ideal gas

Description : The expression, ∆G = nRT. ln(P2/P1), gives the free energy change (A) With pressure changes at constant temperature (B) Under reversible isothermal volume change (C) During heating of an ideal gas (D) During cooling of an ideal gas

Last Answer : (A) With pressure changes at constant temperature

6. Liquefaction of gases cannot be done by (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Merely compressing it beyond critical pressure (D) Adiabatic expansion against a piston or in a turbine

Description : 6. Liquefaction of gases cannot be done by (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Merely compressing it beyond critical pressure (D) Adiabatic expansion against a piston or in a turbine

Last Answer : (C) Merely compressing it beyond critical pressure

Joule-Thomson co-efficient is the ratio of (A) Pressure change to temperature change occuring during adiabatic compression of a gas (B) Pressure change to temperature change occuring during adiabatic throttling of a gas (C) Temperature change to pressure change occuring during adiabatic compression of a gas (D) Temperature change to pressure change occuring during adiabatic throttling of a gas

Description : Joule-Thomson co-efficient is the ratio of (A) Pressure change to temperature change occuring during adiabatic compression of a gas (B) Pressure change to temperature change occuring during adiabatic ... a gas (D) Temperature change to pressure change occuring during adiabatic throttling of a gas

Last Answer : (D) Temperature change to pressure change occuring during adiabatic throttling of a gas

Adiabatic compression is one in which A. Temperature during compression remains constant B. No heat leaves or enters the compressor cylinder during compression C. Temperature rise follows a linear relationship D. Work done is maximum.

Description : Adiabatic compression is one in which A. Temperature during compression remains constant B. No heat leaves or enters the compressor cylinder during compression C. Temperature rise follows a linear relationship D. Work done is maximum.

Last Answer : ANSWER : B

Entropy of an ideal gas depends upon its (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Entropy of an ideal gas depends upon its (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Specific speed of a centrifugal pump depends upon the __________ head. (A) Suction (B) Delivery (C) Manometric (D) None of these

Description : Specific speed of a centrifugal pump depends upon the __________ head. (A) Suction (B) Delivery (C) Manometric (D) None of these

Last Answer : (D) None of these

Cvfor an ideal gas (A) Does not depend upon temperature (B) Is independent of pressure only (C) Is independent of volume only (D) Is independent of both pressure and volume

Description : Cvfor an ideal gas (A) Does not depend upon temperature (B) Is independent of pressure only (C) Is independent of volume only (D) Is independent of both pressure and volume

Last Answer : (D) Is independent of both pressure and volume

Maximum work that could be secured by expanding the gas over a given pressure range is the __________ work. (A) Isothermal (B) Adiabatic (C) Isentropic (D) None of these

Description : Maximum work that could be secured by expanding the gas over a given pressure range is the __________ work. (A) Isothermal (B) Adiabatic (C) Isentropic (D) None of these

Last Answer : (A) Isothermal

Is a steady flow process at total constant pressure through a control volume for which there is no heat?  a. Adiabatic Saturation Process  b. Dew point  c. Adiabatic Ratio  d. None of the above

Description : Is a steady flow process at total constant pressure through a control volume for which there is no heat?  a. Adiabatic Saturation Process  b. Dew point  c. Adiabatic Ratio  d. None of the above

Last Answer : Adiabatic Saturation Process

A heat exchange process in which the product of pressure and volume remains constant is known as  (a) heat exchange process  (b) throttling process  (c) isentropic process  (d) adiabatic process  (e) hyperbolic process.

Description : A heat exchange process in which the product of pressure and volume remains constant is known as  (a) heat exchange process  (b) throttling process  (c) isentropic process  (d) adiabatic process  (e) hyperbolic process.

Last Answer : Answer : e

Those solutions in which there is no volume change upon mixing the components in the liquid state and which, when diluted do not undergo any heat change (i.e. heat of dilution is zero), are called __________ solutions. (A) Ideal (B) Real (C) Isotonic (D) None of these

Description : Those solutions in which there is no volume change upon mixing the components in the liquid state and which, when diluted do not undergo any heat change (i.e. heat of dilution is zero), are called __________ solutions. (A) Ideal (B) Real (C) Isotonic (D) None of these

Last Answer : (A) Ideal

The temperature at which the magnetic property of iron disappears (i.e., it becomes non-magnetic) and its electrical conductivity & specific heat also changes, is called the 'Curie point', which is __________ °C. (A) 768 (B) 908 (C) 1400 (D) 1539

Description : The temperature at which the magnetic property of iron disappears (i.e., it becomes non-magnetic) and its electrical conductivity & specific heat also changes, is called the 'Curie point', which is __________ °C. (A) 768 (B) 908 (C) 1400 (D) 1539

Last Answer : Option A

In a/an __________ reactor, there is exchange of heat with the surroundings with sizeable temperature variation. (A) Adiabatic (B) Isothermal (C) Non-adiabatic (D) None of these

Description : In a/an __________ reactor, there is exchange of heat with the surroundings with sizeable temperature variation. (A) Adiabatic (B) Isothermal (C) Non-adiabatic (D) None of these

Last Answer : (C) Non-adiabatic

The volume of a confined gas is held constant, the pressure is directly proportional to the absolute temperature.  a. Charle’s Law  b. Boyle’s Law  c. Joule’s Law  d. Specific Heat

Description : The volume of a confined gas is held constant, the pressure is directly proportional to the absolute temperature.  a. Charle’s Law  b. Boyle’s Law  c. Joule’s Law  d. Specific Heat

Last Answer : Boyle’s Law

The heat supplied to the gaS at constant volume is (where m = Mass of gas, cv = Specific heat at constant volume, cp = Specific heat at constant pressure, T2 – T1 = Rise in temperature, and R = Gas constant)  A. mR(T2 – T1)  B. mcv(T2 – T1)  C. mcp(T2 – T1)  D. mcp(T2 + T1)

Description : The heat supplied to the gaS at constant volume is (where m = Mass of gas, cv = Specific heat at constant volume, cp = Specific heat at constant pressure, T2 – T1 = Rise in temperature, and R = Gas constant)  A. mR(T2 – T1)  B. mcv(T2 – T1)  C. mcp(T2 – T1)  D. mcp(T2 + T1)

Last Answer : Answer: B

The specific heat at constant volume is  A. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant pressure  B. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant volume  C. the amount of heat required to raise the temperature of 1 kg of water through one degree  D. any one of the above

Description : The specific heat at constant volume is  A. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant pressure  B. the amount of heat required to raise ... to raise the temperature of 1 kg of water through one degree  D. any one of the above

Last Answer : Answer: B

The amount of heat required to raise the temperature of the unit mass of gas through one degree at constant volume, is called  A.specific heat at constant volume  B.specific heat at constant pressure  C.kilo Joule  D.none of these

Description : The amount of heat required to raise the temperature of the unit mass of gas through one degree at constant volume, is called  A.specific heat at constant volume  B.specific heat at constant pressure  C.kilo Joule  D.none of these

Last Answer : Answer: A

According to Avogadro’s Hypothesis  (a) the molecular weights of all the perfect gases occupy the same volume under same conditions of pressure and temperature  (b) the sum of partial pressure of mixture of two gases is sum of the two  (c) product of the gas constant and the molecular weight of an ideal gas is constant  (d) gases have two values of specific heat  (e) all systems can be regarded as closed systems.

Description : According to Avogadro's Hypothesis  (a) the molecular weights of all the perfect gases occupy the same volume under same conditions of pressure and temperature  (b) the sum of partial pressure of ... gases have two values of specific heat  (e) all systems can be regarded as closed systems.

Last Answer : Answer : a

According to kinetic theory of gases, the absolute zero temperature is attained when  (a) volume of the gas is zero  (b) pressure of the gas is zero  (c) kinetic energy of the molecules is zero  (d) specific heat of gas is zero  (e) mass is zero.

Description : According to kinetic theory of gases, the absolute zero temperature is attained when  (a) volume of the gas is zero  (b) pressure of the gas is zero  (c) kinetic energy of the molecules is zero  (d) specific heat of gas is zero  (e) mass is zero.

Last Answer : Answer : c

Claude process of gas liquefaction employs (A) Merely compression of gas beyond its critical pressure (B) Joule-Thomson expansion cooling (C) Heat exchange with colder stream (D) Adiabatic expansion against a piston or in a turbine

Description : Claude process of gas liquefaction employs (A) Merely compression of gas beyond its critical pressure (B) Joule-Thomson expansion cooling (C) Heat exchange with colder stream (D) Adiabatic expansion against a piston or in a turbine

Last Answer : (D) Adiabatic expansion against a piston or in a turbine

Linde process of gas liquefaction employs (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Adiabatic expansion against a piston or in a turbine (D) Merely compressing the gas beyond its critical pressure

Description : Linde process of gas liquefaction employs (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Adiabatic expansion against a piston or in a turbine (D) Merely compressing the gas beyond its critical pressure

Last Answer : (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion)