The necessary condition for phase equilibrium in a multiphase system of N components is that the (A) Chemical potentials of a given component should be equal in all phases (B) Chemical potentials of all components should be same in a particular phase (C) Sum of the chemical potentials of any given component in all the phases should be the same (D) None of these

The necessary condition for phase equilibrium in a multiphase system of N components is that the
(A) Chemical potentials of a given component should be equal in all phases (B) Chemical potentials of all components should be same in a particular phase
(C) Sum of the chemical potentials of any given component in all the phases should be the same
(D) None of these
by

1 Answer

Answer :

(A) Chemical potentials of a given component should be equal in all phases
by

Related questions

The necessary and sufficient condition for equilibrium between two phases is (A) The concentration of each component should be same in the two phases (B) The temperature of each phase should be same (C) The pressure should be same in the two phases (D) The chemical potential of each component should be same in the two phases

Description : The necessary and sufficient condition for equilibrium between two phases is (A) The concentration of each component should be same in the two phases (B) The temperature of each phase should be same ( ... the two phases (D) The chemical potential of each component should be same in the two phases

Last Answer : (D) The chemical potential of each component should be same in the two phases

In an interphase heat transfer process, the equilibrium state corresponds to equality of temperature in the two phases, while the condition for equilibrium in an interphase mass transfer process is equality of (A) Concentrations (B) Chemical potentials (C) Activity co-efficients (D) Mass transfer co-efficients

Description : In an interphase heat transfer process, the equilibrium state corresponds to equality of temperature in the two phases, while the condition for equilibrium in an interphase mass transfer process is ... B) Chemical potentials (C) Activity co-efficients (D) Mass transfer co-efficients

Last Answer : (A) Concentrations

When liquid and vapour phase of multi-component system are in equilibrium (at a given temperature and pressure), then chemical potential of each component is (A) Same in both the phases (B) Zero in both the phases (C) More in vapour phase (D) More in liquid phase

Description : When liquid and vapour phase of multi-component system are in equilibrium (at a given temperature and pressure), then chemical potential of each component is (A) Same in both the phases (B) Zero in both the phases (C) More in vapour phase (D) More in liquid phase

Last Answer : (A) Same in both the phases

When liquid and vapour phases of one component system are in equilibrium (at a given temperature and pressure), the molar free energy is (A) More in vapour phase (B) More in liquid phase (C) Same in both the phases (D) Replaced by chemical potential which is more in vapour phase

Description : When liquid and vapour phases of one component system are in equilibrium (at a given temperature and pressure), the molar free energy is (A) More in vapour phase (B) More in liquid phase (C) Same in both the phases (D) Replaced by chemical potential which is more in vapour phase

Last Answer : (C) Same in both the phases

At equilibrium condition, the chemical potential of a material in different phases in contact with each other is equal. The chemical potential for a real gas (μ) is given by (where, μ = standard chemical potential at unit fugacity (f° = 1 atm.) and the gas behaves ideally.) (A) μ° + RT ln f (B) μ°+ R ln f (C) μ° + T ln f (D) μ° + R/T ln f

Description : At equilibrium condition, the chemical potential of a material in different phases in contact with each other is equal. The chemical potential for a real gas (μ) is given by (where, μ = standard chemical potential at unit fugacity (f° = 1 atm. ... (B) μ°+ R ln f (C) μ° + T ln f (D) μ° + R/T ln f

Last Answer : (A) μ° + RT ln f

The necessary condition of equilibrium of a body is a.The algebraic sum of horizontal components of all forces must be zero b.The algebraic sum of vertical components of all forces must be zero c.The algebraic sum of forces about a point must be zero d.All the above e.None of the above

Description : The necessary condition of equilibrium of a body is a.The algebraic sum of horizontal components of all forces must be zero b.The algebraic sum of vertical components of all forces must be zero c.The algebraic sum of forces about a point must be zero d.All the above e.None of the above

Last Answer : d. All the above

Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium solubility curve in case of a single component stripper (C) The operating pressure in solvent extraction system should be below vapor pressures of all components (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Description : Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium ... (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Last Answer : (C) The operating pressure in solvent extraction system should be below vapor pressures of all components

For multi-component multiple phases to be in equilibrium at the same pressure and temperature, the __________ of each component must be same in all phases. (A) Chemical potential (B) Fugacity (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : For multi-component multiple phases to be in equilibrium at the same pressure and temperature, the __________ of each component must be same in all phases. (A) Chemical potential (B) Fugacity (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

If a system involves two phases, it is in ______ equilibrium when the mass of each phase reaches an equilibrium level and stays there.  A. Chemical  B. Thermal  C. Mechanical  D. Phase

Description : If a system involves two phases, it is in ______ equilibrium when the mass of each phase reaches an equilibrium level and stays there.  A. Chemical  B. Thermal  C. Mechanical  D. Phase

Last Answer : Phase

Cleo Davis sets forth one major condition when her firm's sales managers sit down to reallocate accounts into sales territories: "It is an absolute necessity that the sales potentials of the territories we establish be A)equal." B)measurable." C)consistent." D)the same as before."

Description : Cleo Davis sets forth one major condition when her firm's sales managers sit down to reallocate accounts into sales territories: "It is an absolute necessity that the sales potentials of the territories we establish be A)equal." B)measurable." C)consistent." D)the same as before."

Last Answer : B)measurable."

If a two phase system is in physical equilibrium; then it means that, the(A) Escaping tendency of each component from the liquid phase to the vaporphase is exactly equal to that from vapor phase to liquid phase(B) Temperature of the liquid phase is equal to that of the vapor phase(C) Total pressure throughout the liquid phase is equal to that throughout thevapor phase(D) All (A), (B) and (C)

Description : If a two phase system is in physical equilibrium; then it means that, the (A) Escaping tendency of each component from the liquid phase to the vapor phase is exactly equal to that from vapor phase to liquid phase ... liquid phase is equal to that throughout the vapor phase (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A plot of pressure vs. temperature for a given substance showing the various phases possible for that particular substance.  a. Phase diagram  b. P-T diagram  c. Wein Diagram  d. Histogram

Description : A plot of pressure vs. temperature for a given substance showing the various phases possible for that particular substance.  a. Phase diagram  b. P-T diagram  c. Wein Diagram  d. Histogram

Last Answer : Phase diagram

In case of absorption & stripping, the interface of the liquid & gas phases are present in equilibrium, when the diffusional resistance of __________ is zero. (A) Interface (B) Gas phase (C) Liquid phase (D) All 'a', 'b' & 'c'

Description : In case of absorption & stripping, the interface of the liquid & gas phases are present in equilibrium, when the diffusional resistance of __________ is zero. (A) Interface (B) Gas phase (C) Liquid phase (D) All 'a', 'b' & 'c'

Last Answer : (A) Interface

The reaction A (l) → R(g) is allowed to reach equilibrium conditions in an autoclave. At equilibrium, there are two phases, one a pure liquid phase of A and the other a vapor phase of A, R and S. Initially A alone is present. The numbers of degrees of freedom are: (A) 1 (B) 2 (C) 3 (D) 0

Description : The reaction A (l) → R(g) is allowed to reach equilibrium conditions in an autoclave. At equilibrium, there are two phases, one a pure liquid phase of A and the other a vapor phase of A, R and S. Initially A alone is present. The numbers of degrees of freedom are: (A) 1 (B) 2 (C) 3 (D) 0

Last Answer : (B) 2

The necessary condition for forces to be in equilibrium is that these should be (A) Coplanar (B) Meet at one point (C) Both (A) and (B) above (D) All be equal

Description : The necessary condition for forces to be in equilibrium is that these should be (A) Coplanar (B) Meet at one point (C) Both (A) and (B) above (D) All be equal

Last Answer : (C) Both (A) and (B) above

The potential due to a dipole at a point P from it is the a) Sum of potentials at the charges b) Difference of potentials at the charges c) Multiplication of potentials at the charges d) Ratio of potentials at the charges

Description : The potential due to a dipole at a point P from it is the a) Sum of potentials at the charges b) Difference of potentials at the charges c) Multiplication of potentials at the charges d) Ratio of potentials at the charges

Last Answer : b) Difference of potentials at the charges

What is the state at which all three phases of water coexist in equilibrium?  A. Tripoint of water  B. Triple point of water  C. Triple phase point of water  D. Phase point of water

Description : What is the state at which all three phases of water coexist in equilibrium?  A. Tripoint of water  B. Triple point of water  C. Triple phase point of water  D. Phase point of water

Last Answer : Triple point of water

What determines the number of field poles required to establish a rotating magnetic field in a multiphase motor stator?

Description : What determines the number of field poles required to establish a rotating magnetic field in a multiphase motor stator?

Last Answer : The number of phases in the applied voltage.

The necessary condition for the forces acting on a body to be in equilibrium is that these should be a.In the same direction b.Coplaner c.Similar in nature d.Should not meet at a point e.(B) and (D) above

Description : The necessary condition for the forces acting on a body to be in equilibrium is that these should be a.In the same direction b.Coplaner c.Similar in nature d.Should not meet at a point e.(B) and (D) above

Last Answer : e. (B) and (D) above

Variation of equilibrium pressure with temperature for any two phases of a given substances is given by the __________ equation. (A) Gibbs-Duhem (B) Maxwell's (C) Clapeyron (D) None of these

Description : Variation of equilibrium pressure with temperature for any two phases of a given substances is given by the __________ equation. (A) Gibbs-Duhem (B) Maxwell's (C) Clapeyron (D) None of these

Last Answer : (C) Clapeyron

If a manager tries to form territories with equal sales potential, the territories will usually be unequal in geographic size; this will cause the salespersons with larger territories to A)develop larger income potentials. B)have to work longer and harder to generate a certain sales volume. C)work about the same amount, since potential is the same. D)have much larger sales than those salespeople with smaller territories.

Description : If a manager tries to form territories with equal sales potential, the territories will usually be unequal in geographic size; this will cause the salespersons with larger territories to A)develop ... potential is the same. D)have much larger sales than those salespeople with smaller territories.

Last Answer : B)have to work longer and harder to generate a certain sales volume.

A reasonably general expression for vapour-liquid phase equilibrium at low to moderate pressure is φi yi P = Yi xifi° where, Φ is a vapor fugacity component, Yiis the liquid activity co-efficient and fi° is the fugacity of the pure component i. the Ki value (Yi = Ki xi) is therefore, in general a function of (A) Temperature only (B) Temperature and pressure only (C) Temperature, pressure and liquid composition xi only (D) Temperature, pressure, liquid composition xi and vapour composition yi

Description : A reasonably general expression for vapour-liquid phase equilibrium at low to moderate pressure is φi yi P = Yi xifi° where, Φ is a vapor fugacity component, Yiis the liquid activity co- ... and liquid composition xi only (D) Temperature, pressure, liquid composition xi and vapour composition yi

Last Answer : (C) Temperature, pressure and liquid composition xi only

According to principle of moments (A) If a system of coplanar forces is in equilibrium, then their algebraic sum is zero (B) If a system of coplanar forces is in equilibrium, then the algebraic sum of their moments about any point in their plane is zero (C) The algebraic sum of the moments of any two forces about any point is equal to moment of their resultant about the same point (D) Positive and negative couples can be balanced

Description : According to principle of moments  (A) If a system of coplanar forces is in equilibrium, then their algebraic sum is zero  (B) If a system of coplanar forces is in equilibrium, then the ... of  their resultant about the same point  (D) Positive and negative couples can be balanced

Last Answer : (C) The algebraic sum of the moments of any two forces about any point is equal to moment of  their resultant about the same point 

A manufacture undertakes to supply 2000 pieces of a particular component at Rs.25 per piece. According to his estimates, even if 5% fail to pass the quality tests, then he will make a profit of 25%. However as it turned out, 50% of the components were rejected. What is the loss to the manufacture? [TCS recruitment exam question] A. Rs 12,000 B. Rs 13,000 C. Rs 14,000 D. Rs 15,000 E. None f these

Description : A manufacture undertakes to supply 2000 pieces of a particular component at Rs.25 per piece. According to his estimates, even if 5% fail to pass the quality tests, then he will make a profit of 25%. However as it turned out, ... A. Rs 12,000 B. Rs 13,000 C. Rs 14,000 D. Rs 15,000 E. None f these

Last Answer : Answer - B. Rs 13,000 Explanation: 5% of 2000=100 so 2000-100=1900 so,if he sells 1900 he will get 25% profit cost per piece rs 25 so 25x 1900 don't solve here if 125% . ... /125=38000=CP if 50% rejected,only 1000 pieces sold so 1000 25=25000=SP loss=cp-sp= 38000-25000=13000

Pick out the wrong statement. (A) A particular chemical reaction is more temperature sensitive at low temperatures (B) A very high value of equilibrium constant, K (K >> 1) indicates that the reaction is practically irreversible in nature (C) The intercept of the Arrhenius plot is called the 'activation energy' (D) Non-ideal flow takes place in reactors due to recycling, channeling or by creation of stagnant regions

Description : Pick out the wrong statement. (A) A particular chemical reaction is more temperature sensitive at low temperatures (B) A very high value of equilibrium constant, K (K >> 1) indicates that the ... ) Non-ideal flow takes place in reactors due to recycling, channeling or by creation of stagnant regions

Last Answer : (C) The intercept of the Arrhenius plot is called the 'activation energy

The chemical potential of a component (μi) of a phase is the amount by which its capacity for doing all work, barring work of expansion is increased per unit amount of substance added for an infinitesimal addition at constant temperature and pressure. It is given by (A) (∂E/∂ni)S, v, nj (B) (∂G/∂ni)T, P, nj = (∂A/∂ni) T, v, nj (C) (∂H/∂ni)S, P, nj (D) All (A), (B) and (C)

Description : The chemical potential of a component (μi) of a phase is the amount by which its capacity for doing all work, barring work of expansion is increased per unit amount of substance added for an infinitesimal addition at constant temperature and ... , nj (C) (∂H/∂ni)S, P, nj (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The equilibrium equation for the condition that tension will be equal to the compression is given by [ A ] Compression in concrete = Tension in steel [ B ] Compression in concrete + Compression in steel = Tension in steel [ C ] Compression in concrete = Compression in steel [ D ] None of the above

Description : The equilibrium equation for the condition that tension will be equal to the compression is given by [ A ] Compression in concrete = Tension in steel [ B ] Compression in concrete + Compression in steel = Tension in steel [ C ] Compression in concrete = Compression in steel [ D ] None of the above

Last Answer : [ B ] Compression in concrete + Compression in steel = Tension in steel

Solid and liquid phases of a substance are in equilibrium at the (A) Critical temperature (B) Melting point (C) Freezing point (D) Both (B) and (C)

Description : Solid and liquid phases of a substance are in equilibrium at the (A) Critical temperature (B) Melting point (C) Freezing point (D) Both (B) and (C)

Last Answer : D) Both (B) and (C)

The absorptivity of a body is equal to its emissivity (A) At a particular temperature (B) For circular bodies (C) Under thermal equilibrium (D) None of these

Description : The absorptivity of a body is equal to its emissivity (A) At a particular temperature (B) For circular bodies (C) Under thermal equilibrium (D) None of these

Last Answer : (C) Under thermal equilibrium

Chemical engineering plant cost index is used for finding the present cost of a particular chemical plant, if the cost of similar plant at some time in the past is known. The present cost of the plant = original cost × (index value at present/ index value at time original cost was obtained). The most major component of this cost index is (A) Fabricated equipment and machinery (B) Process instruments and control (C) Pumps and compressor (D) Electrical equipments and material

Description : Chemical engineering plant cost index is used for finding the present cost of a particular chemical plant, if the cost of similar plant at some time in the past is known. The present cost of ... (B) Process instruments and control (C) Pumps and compressor (D) Electrical equipments and material

Last Answer : (A) Fabricated equipment and machinery

Number of degrees of freedom for a three phase system in equilibrium comprising of three non-reacting chemical species is (A) 2 (B) 0 (C) 1 (D) 3

Description : Number of degrees of freedom for a three phase system in equilibrium comprising of three non-reacting chemical species is (A) 2 (B) 0 (C) 1 (D) 3

Last Answer : (A) 2

Two half-reactions of an electrochemical cell are given below : MnO–4 (aq) + 8H+ (aq) + 5e– → Mn2+ (aq) + 4H2O (I), E° = 1.51 V Sn2+ (aq) → Sn4+ (aq) + 2e–, E° = + 0.15 V. Construct the redox reaction equation from the two half-reactions and calculate the cell potential from the standard potentials and predict if the reaction is reactant or product favoured. -Chemistry

Description : Two half-reactions of an electrochemical cell are given below : MnO-4 (aq) + 8H+ (aq) + 5e- → Mn2+ (aq) + 4H2O (I), E° = 1.51 V Sn2+ (aq) → Sn4+ (aq) + ... -reactions and calculate the cell potential from the standard potentials and predict if the reaction is reactant or product favoured. -Chemistry

Last Answer : The reactions can be represented at anode and at cathode in the following ways : At anode (oxidation) : Sn2+ → Sn4+ (aq) + 2e- ] 5 E° = + 0.15 V Af cathode (reduction) : MnO-4(aq) + 8H+ ( ... = E°cathode - E°anode = 1.51 - 0.15 = + 1.36 V ∴ Positive value of E°cell favours formation of product.

Fixed capital investment of a chemical plant is the total amount of money needed to supply the necessary plant and manufacturing facilities plus the working capital for operation of the facilities. Which of the following components of fixed capital investment requires minimum percentage of it? (A) Electrical installation cost (B) Equipment installation cost (C) Cost for piping (D) Equipment insulation cost

Description : Fixed capital investment of a chemical plant is the total amount of money needed to supply the necessary plant and manufacturing facilities plus the working capital for operation of the facilities. Which of ... (B) Equipment installation cost (C) Cost for piping (D) Equipment insulation cost

Last Answer : (D) Equipment insulation cost

What is the degree of freedom of an absorption process in which only one component is transferred between phases? (A) 1 (B) 2 (C) 3 (D) 4

Description : What is the degree of freedom of an absorption process in which only one component is transferred between phases? (A) 1 (B) 2 (C) 3 (D) 4

Last Answer : (C) 3

For an ideal gas mixture undergoing a reversible gaseous phase chemical reaction, the equilibrium constant(A) Is independent of pressure(B) Increases with pressure(C) Decreases with pressure(D) Increases /decreases with pressure depending on the stoichiometric co￾efficients of the reaction

Description : For an ideal gas mixture undergoing a reversible gaseous phase chemical reaction, the equilibrium constant (A) Is independent of pressure (B) Increases with pressure (C) Decreases with pressure (D) Increases /decreases with pressure depending on the stoichiometric co￾efficients of the reaction

Last Answer : (B) Increases with pressure

For the gaseous phase chemical reaction, C2H4(g) + H2O(g) ↔ C2H5OH(g), the equilibrium conversion does not depend on the (A) Steam to ethylene ratio (B) Temperature (C) Pressure (D) None of these

Description : For the gaseous phase chemical reaction, C2H4(g) + H2O(g) ↔ C2H5OH(g), the equilibrium conversion does not depend on the (A) Steam to ethylene ratio (B) Temperature (C) Pressure (D) None of these

Last Answer : (D) None of these

What are two phases in dynamic equilibrium?

Description : What are two phases in dynamic equilibrium?

Last Answer : Need answer

A number of forces acting at a point will be in equilibrium if (A) Their total sum is zero (B) Two resolved parts in two directions at right angles are equal (C) Sum of resolved parts in any two perpendicular directions are both zero (D) All of them are inclined equally

Description : A number of forces acting at a point will be in equilibrium if (A) Their total sum is zero (B) Two resolved parts in two directions at right angles are equal (C) Sum of resolved parts in any two perpendicular directions are both zero (D) All of them are inclined equally

Last Answer : (C) Sum of resolved parts in any two perpendicular directions are both zero

For a body to be in equilibrium, which of the following conditions must exist? w) no forces may be acting on the body. x) the body must be accelerating. y) the velocity of the body must be zero. z) the sum of the forces acting on the body must be equal to zero.

Description : For a body to be in equilibrium, which of the following conditions must exist? w) no forces may be acting on the body. x) the body must be accelerating. y) the velocity of the body must be zero. z) the sum of the forces acting on the body must be equal to zero. 

Last Answer : ANSWER: Z -- THE SUM OF THE FORCES ACTING ON THE BODY MUST BE EQUAL TO ZERO.

Chemical potential (an intensive property) of a substance is a force that drives the chemical system to equilibrium and is equal to its partial molar properties. The ratio of chemical potential to free energy of a pure substance at constant temperature and pressure is (A) 0 (B) 1 (C) ∞ (D) None of these

Description : Chemical potential (an intensive property) of a substance is a force that drives the chemical system to equilibrium and is equal to its partial molar properties. The ratio of chemical potential to free energy of a pure substance ... temperature and pressure is (A) 0 (B) 1 (C) ∞ (D) None of these

Last Answer : (B) 1

A system is said to be in thermodynamic equilibrium if it maintains ______ equilibrium.  A. Mechanical and phase  B. Thermal and chemical  C. Thermal, mechanical and chemical  D. Thermal, phase, mechanical and chemical

Description : A system is said to be in thermodynamic equilibrium if it maintains ______ equilibrium.  A. Mechanical and phase  B. Thermal and chemical  C. Thermal, mechanical and chemical  D. Thermal, phase, mechanical and chemical

Last Answer : Thermal, phase, mechanical and chemical

A system is in ______ equilibrium of its chemical composition does not change with time, i.e., no chemical reaction occurs.  A. Chemical  B. Thermal  C. Mechanical  D. Phase

Description : A system is in ______ equilibrium of its chemical composition does not change with time, i.e., no chemical reaction occurs.  A. Chemical  B. Thermal  C. Mechanical  D. Phase

Last Answer : Chemical

Given below is a schematic break-up of the phases/stages of cell cycle :- Which one of the following is the correct indication of the stage/phase in t

Description : Given below is a schematic break-up of the phases/stages of cell cycle :- Which one of the following is the correct indication of the stage/phase in t

Last Answer : Given below is a schematic break-up of the phases/stages of cell cycle :- Which one of the ... Metaphase C. C- Karyokinesis D. D- Synthesis phase

Given below is a schematic break-up of the phases/stages of cell cycle. Which one of the following is the correct indication of the stage/phase in the cell cycle? (a) C - karyokinesis (b) D - synthetic phase (c) A - cytokinesis (d) B - metaphase

Description : Given below is a schematic break-up of the phases/stages of cell cycle. Which one of the following is the correct indication of the stage/phase in the cell cycle? (a) C - karyokinesis (b) D - synthetic phase (c) A - cytokinesis (d) B - metaphase

Last Answer : (b) D - synthetic phase

Buoyant force is (A) Resultant force acting on a floating body (B) Equal to the volume of liquid displaced (C) Force necessary to keep a body in equilibrium (D) The resultant force on a body due to the fluid surrounding it

Description : Buoyant force is (A) Resultant force acting on a floating body (B) Equal to the volume of liquid displaced (C) Force necessary to keep a body in equilibrium (D) The resultant force on a body due to the fluid surrounding it

Last Answer : Answer: Option D

Buoyant force is (A) The resultant force acting on a floating body (B) The resultant force on a body due to the fluid surrounding it (C) Equal to the volume of liquid displaced (D) The force necessary to maintain equilibrium of a submerged body

Description : Buoyant force is (A) The resultant force acting on a floating body (B) The resultant force on a body due to the fluid surrounding it (C) Equal to the volume of liquid displaced (D) The force necessary to maintain equilibrium of a submerged body

Last Answer : Answer: Option B