The orthographical projection of a traverse leg upon the reference meridian, is known as (A) Departure of leg (B) Latitude to the leg (C) Co-ordinate of the leg (D) Bearing of the leg

The orthographical projection of a traverse leg upon the reference meridian, is known as
(A) Departure of leg
(B) Latitude to the leg
(C) Co-ordinate of the leg
(D) Bearing of the leg
by

1 Answer

Answer :

(B) Latitude to the leg
by

Related questions

The co-ordinate of a point measured perpendicular to the parallel, is called (A) Total latitude (B) Meridian distance (C) Total departure (D) Consecutive co-ordinate

Description : The co-ordinate of a point measured perpendicular to the parallel, is called (A) Total latitude (B) Meridian distance (C) Total departure (D) Consecutive co-ordinate

Last Answer : (A) Total latitude

The length of a traverse leg may be obtained by multiplying the latitude and (A) Secant of its reduced bearing (B) Sine of its reduced bearing (C) Cosine of its reduced bearing (D) Tangent of its reduced bearing

Description : The length of a traverse leg may be obtained by multiplying the latitude and (A) Secant of its reduced bearing (B) Sine of its reduced bearing (C) Cosine of its reduced bearing (D) Tangent of its reduced bearing

Last Answer : (A) Secant of its reduced bearing

If the reduced bearing of a line AB is N60°W and length is 100 m, then the latitude and departure respectively of the line AB will be (A) +50 m, +86.6 m (B) +86.6 m, -50 m (C) +50 m, -86.6 m (D) +70.7 m, -50 m

Description : If the reduced bearing of a line AB is N60°W and length is 100 m, then the latitude and departure respectively of the line AB will be (A) +50 m, +86.6 m (B) +86.6 m, -50 m (C) +50 m, -86.6 m (D) +70.7 m, -50 m

Last Answer : (B) +86.6 m, -50 m

The most reliable method of plotting a theodolite traverse, is (A) By consecutive co-ordinates of each station (B) By independent co-ordinates of each station (C) By plotting included angles and scaling off each traverse leg (D) By the tangent method of plotting

Description : The most reliable method of plotting a theodolite traverse, is (A) By consecutive co-ordinates of each station (B) By independent co-ordinates of each station (C) By plotting included angles and scaling off each traverse leg (D) By the tangent method of plotting

Last Answer : (B) By independent co-ordinates of each station

If is the perimete D is the closing error in departure, the correction for the departure of a traverse side of length , according to Bowditch rule, is (A) D × L/l (B) D × l²/L (C) L × l D (D) D × l/L

Description : If is the perimete D is the closing error in departure, the correction for the departure of a traverse side of length , according to Bowditch rule, is (A) D × L/l (B) D × l²/L (C) L × l D (D) D × l/L

Last Answer : (D) D × l/L

The distance between terminal points computed from a subsidiary traverse run between them, is generally known, as (A) Traverse leg (B) A base (C) Traverse base (D) All the above

Description : The distance between terminal points computed from a subsidiary traverse run between them, is generally known, as (A) Traverse leg (B) A base (C) Traverse base (D) All the above

Last Answer : (C) Traverse base

0 Pick up the correct statement from the following: (A) The point through which the resultant of the shear stresses passes is known as shear centre(B) In the standard rolled channels, the shear centre is on the horizontal line passing through and away from the C.G. beyond web (C) In equal angles, the shear centre is on the horizontal plane and away from the C.G., outside of the leg projection (D) All the above

Description : 0 Pick up the correct statement from the following: (A) The point through which the resultant of the shear stresses passes is known as shear centre (B) In the standard rolled channels, the shear centre ... horizontal plane and away from the C.G., outside of the leg projection (D) All the above

Last Answer : (D) All the above

The horizontal angle between true meridian and magnetic meridian, is known (A) Bearing (B) Magnetic declination (C) Dip (D) Convergence

Description : The horizontal angle between true meridian and magnetic meridian, is known  (A) Bearing  (B) Magnetic declination( C) Dip (D) Convergence

Last Answer : (B) Magnetic declination

The smaller horizontal angle between the true meridian and a survey line, is known (A) Declination (B) Bearing (C) Azimuth (D) Dip

Description : The smaller horizontal angle between the true meridian and a survey line, is known (A) Declination (B) Bearing (C) Azimuth (D) Dip

Last Answer : (C) Azimuth

If a linear traverse follows a sharp curve round a large lake where it is difficult to have long legs, the accuracy of the traverse may be improved by (A) Taking short legs (B) Making repeated observations of angular and linear measurements (C) Making a subsidiary traverse to determine the length of a long leg (D) All the above

Description : If a linear traverse follows a sharp curve round a large lake where it is difficult to have long legs,  the accuracy of the traverse may be improved by  (A) Taking short legs  (B) Making ... (C) Making a subsidiary traverse to determine the length of a long leg  (D) All the above 

Last Answer : (C) Making a subsidiary traverse to determine the length of a long leg 

For a closed traverse the omitted measurements may be calculated (A) Length of one side only (B) Bearing of one side only (C) Both length and bearing of one side (D) All the above

Description : For a closed traverse the omitted measurements may be calculated (A) Length of one side only (B) Bearing of one side only (C) Both length and bearing of one side (D) All the above

Last Answer : (D) All the above

If in a closed traverse, the sum of the north latitudes is more than the sum of the south latitudes and also the sum of west departures than the sum of the east departures, the bearing of the closing line is in the (A) NE quadrant (B) SE quadrant (C) NW quadrant(D) SW quadrant

Description : If in a closed traverse, the sum of the north latitudes is more than the sum of the south latitudes and also the sum of west departures than the sum of the east departures, the bearing of the closing line is in the (A) NE quadrant (B) SE quadrant (C) NW quadrant (D) SW quadrant

Last Answer : (B) SE quadrant

The bearing of C from A is N 30° E and from B, 50 metres east of A, is N 60° W. The departure of C from A is (A) 50 m (B) 50 m (C) 25 m (D) 25 m

Description : The bearing of C from A is N 30° E and from B, 50 metres east of A, is N 60° W. The departure of C from A is (A) 50 m (B) 50 m (C) 25 m (D) 25 m

Last Answer : (D) 25 m

Reduced bearing of a line is an angle between (A) North line and given line measured clockwise (B) North line and given line measured anticlockwise (C) East or west and the given line (D) Given line and the part of the meridian whether N end or S end, lying adjacent to it

Description : Reduced bearing of a line is an angle between (A) North line and given line measured clockwise (B) North line and given line measured anticlockwise (C) East or west and the given line (D) Given line and the part of the meridian whether N end or S end, lying adjacent to it

Last Answer : (D) Given line and the part of the meridian whether N end or S end, lying adjacent to it

If the bearing capacity of soil is 10 tonnes/cm2 and the projection of plain concrete footing from walls, is a cm, the depth D of footing is (A) D = 0.0775 a (B) D = 0.775 a (C) D = 0.775 a (D) D = 0.775 a2

Description : If the bearing capacity of soil is 10 tonnes/cm2 and the projection of plain concrete footing from walls, is a cm, the depth D of footing is (A) D = 0.0775 a (B) D = 0.775 a (C) D = 0.775 a (D) D = 0.775 a2

Last Answer : Answer: Option B

Define Latitude and Departure.

Description : Define Latitude and Departure. 

Last Answer : Latitude : The projection of survey line parallel to meridian is called latitude. OR Projection of survey line parallel to N-S direction is called latitude. Departure: The projection of survey ... is called departure. OR Projection of survey line parallel to E-W direction is called departure.

Define the term departure and latitude

Description : Define the term departure and latitude

Last Answer : Departure :- It is the distance parallel to the East-West line OR the projection of survey line perpendicular to the meridian is called departure. Latitude :- It is the distance parallel to the North-South line OR the projection of survey line parallel to the meridian is called latitude.

Define the terms- latitude and departure.

Description : Define the terms- latitude and departure. 

Last Answer :  Latitude – The projective distance of survey line parallel to meridian (i.e. N-S direction) is known as Latitude of a line. Departure - The projective distance of survey line perpendicular to meridian (i.e. N-S direction) is known as Departure of a line.

What is the latitude and longitude when the equator and the original meridian intersect ?

Description : What is the latitude and longitude when the equator and the original meridian intersect ?

Last Answer : When the equator and the original meridian intersect, the latitude and longitude are 0 degrees.

Magnetic Meridian is a – (1) Line parallel to the equator of the Earth (2) Latitude (3) Line joining the geographic north and geographic south of Earth (4) Plane passing through the magnetic north and magnetic south of Earth

Description : Magnetic Meridian is a – (1) Line parallel to the equator of the Earth (2) Latitude (3) Line joining the geographic north and geographic south of Earth (4) Plane passing through the magnetic north and magnetic south of Earth

Last Answer : (4) Plane passing through the magnetic north and magnetic south of Earth Explanation: Magnetic Meridian is a line on the earth's surface approximating a great circle passing through the north and south ... lines along the surface of the earth. A compass needle is parallel to the magnetic meridian.

The angle between the magnetic meridian and the geographical meridian at a place is (1) Azimuth (2) Dip (3) Declination (4) Latitude

Description : The angle between the magnetic meridian and the geographical meridian at a place is (1) Azimuth (2) Dip (3) Declination (4) Latitude

Last Answer : (3) Declination Explanation: Magnetic declination is the angle between compass north (the direction the north end of a compass needle points) and true north (the direction along the earth's surface towards the geographic North Pole.

Magnetic Meridian is a (1) Line parallel to the equator of the Earth (2) Latitude (3) Line joining the geographic north and geographic south of Earth (4) Plane passing through the magnetic north and magnetic south of Earth

Description : Magnetic Meridian is a (1) Line parallel to the equator of the Earth (2) Latitude (3) Line joining the geographic north and geographic south of Earth (4) Plane passing through the magnetic north and magnetic south of Earth

Last Answer : Plane passing through the magnetic north and magnetic south of Earth

The angle between the magnetic meridian and the geographical meridian at a place is (1) Azimuth (2) Dip (3) Declination(4) Latitude

Description : The angle between the magnetic meridian and the geographical meridian at a place is (1) Azimuth (2) Dip (3) Declination(4) Latitude

Last Answer : Declination

Define the terms i) Fore Bearing, ii) Open traverse, iii) Closing error, iv) Reduced bearing

Description : Define the terms i) Fore Bearing, ii) Open traverse, iii) Closing error, iv) Reduced bearing

Last Answer : i) Fore bearing : The bearing observed in the direction of progress of survey in clockwise manner is called fore bearing  ii) Open traverse : When the first and last survey lines does ... north or south direction in clockwise or anticlockwise manner is known as reduced or quadrantal bearing. 

The depth of concrete bed of the foundation depends upon (A) The projection of the concrete block beyond the footing over it (B) The upward soil pressure (C) The mix of the concrete (D) All the above

Description : The depth of concrete bed of the foundation depends upon (A) The projection of the concrete block beyond the footing over it (B) The upward soil pressure (C) The mix of the concrete (D) All the above

Last Answer : Answer: Option D

Total latitude of a point is positive if it lies (A) North of the reference parallel (B) South of the reference parallel (C) East of the reference parallel (D) West of the reference parallel

Description : Total latitude of a point is positive if it lies (A) North of the reference parallel (B) South of the reference parallel (C) East of the reference parallel (D) West of the reference parallel

Last Answer : (A) North of the reference parallel

The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Description : The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Last Answer : (A) Chain surveying

The operation of making the algebraic sum of latitudes and departures of a closed traverse, each equal to zero, is known (A) Balancing the sights (B) Balancing the departures (C) Balancing the latitudes (D) Balancing the traverse

Description : The operation of making the algebraic sum of latitudes and departures of a closed traverse, each equal to zero, is known (A) Balancing the sights (B) Balancing the departures (C) Balancing the latitudes (D) Balancing the traverse

Last Answer : (D) Balancing the traverse

Activity co-efficient is a measure of the (A) Departure from ideal solution behaviour (B) Departure of gas phase from ideal gas law (C) Vapour pressure of liquid (D) None of these

Description : Activity co-efficient is a measure of the (A) Departure from ideal solution behaviour (B) Departure of gas phase from ideal gas law (C) Vapour pressure of liquid (D) None of these

Last Answer : (A) Departure from ideal solution behaviour

Any convenient co-ordinate system or Cartesian co-ordinates which can be usedto define the picture is called a.spherical co-ordinates b.vector co-ordinates c.viewport co-ordinates d.world co-ordinates

Description : Any convenient co-ordinate system or Cartesian co-ordinates which can be usedto define the picture is called a.spherical co-ordinates b.vector co-ordinates c.viewport co-ordinates d.world co-ordinates

Last Answer : d.world co-ordinates

By changing the dimensions of the viewport, the and ofthe objects being displayed can be manipulated. a.Number of pixels and image quality b.X co-ordinate and Y co-ordinate c.Size and proportions d.All of these

Description : By changing the dimensions of the viewport, the and ofthe objects being displayed can be manipulated. a.Number of pixels and image quality b.X co-ordinate and Y co-ordinate c.Size and proportions d.All of these

Last Answer : c.Size and proportions

The window opened on the raster graphics screen in which the image will bedisplayed is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Description : The window opened on the raster graphics screen in which the image will bedisplayed is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Last Answer : d.Interface window

What is the rectangle in the world defining the region that is to be displayed? a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Description : What is the rectangle in the world defining the region that is to be displayed? a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Last Answer : c.World window

What is the name of the space in which the image is displayed? a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Description : What is the name of the space in which the image is displayed? a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Last Answer : b.Screen co-ordinate system

The object space or the space in which the application model is defined is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Description : The object space or the space in which the application model is defined is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Last Answer : a.World co-ordinate system

Which of this is compulsory for 2D reflection? a.Reflection plane. b.Origin c.Reflection axis d.Co-ordinate axis.

Description : Which of this is compulsory for 2D reflection? a.Reflection plane. b.Origin c.Reflection axis d.Co-ordinate axis.

Last Answer : c.Reflection axis

Find the co-ordinate where the equation 2x + 3y = 6 intersects x-axis. -Maths 9th

Description : Find the co-ordinate where the equation 2x + 3y = 6 intersects x-axis. -Maths 9th

Last Answer : Solution :-

Write the linear equation represented by line AB and PQ. Also find the co-ordinate of intersection of line AB and PQ. -Maths 9th

Description : Write the linear equation represented by line AB and PQ. Also find the co-ordinate of intersection of line AB and PQ. -Maths 9th

Last Answer : Solution :-

Draw the graph of the equation 3x + 4y = 12 and find the co-ordinates of the points of intersection of the equation with the co-ordinate axes. -Maths 9th

Description : Draw the graph of the equation 3x + 4y = 12 and find the co-ordinates of the points of intersection of the equation with the co-ordinate axes. -Maths 9th

Last Answer : Solution :-

Draw the bar graph of linear equation whose solution are represented by the points having difference the co-ordinate as 25 units -Maths 9th

Description : Draw the bar graph of linear equation whose solution are represented by the points having difference the co-ordinate as 25 units -Maths 9th

Last Answer : This answer was deleted by our moderators...

What do you mean by Co-ordinate Geometry? -Maths 9th

Description : What do you mean by Co-ordinate Geometry? -Maths 9th

Last Answer : (a) \(rac{2^n}{5^n}\)In any number the last digits can 0, 1, 2, 3, 4, 5, 6, 7, 8 and 9. Therefore, the last digit of each number can be chosen in 10 ways. ∴ Exhaustive number of ways = 10n. If the ... , favourable number of ways = 4n ∴ Required probability = \(rac{4^n}{10^n}\) = \(rac{2^n}{5^n}\).

What do you mean by Co-ordinates (Abscissa and Ordinate)? Explain with figure. -Maths 9th

Description : What do you mean by Co-ordinates (Abscissa and Ordinate)? Explain with figure. -Maths 9th

Last Answer : Co-ordinate Geometry is that branch of geometry in which two numbers, called co-ordinates are used to indicate the position of a point in a plane and which make use of algebraic methods in the study of geometric figures.

If (–5, 4) divides the line segment between the co-ordinate axes in the ratio 1 : 2, then what is its equation ? -Maths 9th

Description : If (–5, 4) divides the line segment between the co-ordinate axes in the ratio 1 : 2, then what is its equation ? -Maths 9th

Last Answer : (d) x = yThe equations of the given lines are: 4x + 3y = 12 ...(i) 3x + 4y = 12 ...(ii) Solving the simultaneous equations (i) and (ii), we get\(x\) = \(rac{12}{7}\), y = \(rac{12}{7}\)∴ Point of the ... )isy - 0 = \(\bigg(rac{rac{12}{7}-0}{rac{12}{7}-0}\bigg)\) (x - 0), i.e., y = x.

The straight line ax + by + c = 0 and the co-ordinate axes form an isosceles triangle under which of the following conditions ? -Maths 9th

Description : The straight line ax + by + c = 0 and the co-ordinate axes form an isosceles triangle under which of the following conditions ? -Maths 9th

Last Answer : (a) | a | = | b | The equation of line AB, i.e., ax + by + c = 0 in intercept form is ax + by = - c⇒ \(rac{x}{\big(-rac{c}{a}\big)}\) + \(rac{x}{\big(-rac{c}{b}\big)}\) = 1Δ AOB is isosceles Δ if OA = OB, i.e., ... \(rac{-c}{a}\) = \(rac{-c}{a}\) ⇒ \(rac{1}{a}\) = \(rac{1}{a}\) ⇒ | a | = | b |.

A particle moves along the curve `6y = x^3 + 2`. Find the points on the curve at which y-co-ordinate is changing 8 times as fast as the x-co-ordinate.

Description : A particle moves along the curve `6y = x^3 + 2`. Find the points on the curve at which y-co-ordinate is changing 8 times as fast as the x-co-ordinate.

Last Answer : A particle moves along the curve `6y = x^3 + 2`. Find the points on the curve at which y-co-ordinate is changing 8 times as fast as the x-co-ordinate.

A six co-ordinate complex has the formula `CoCl_(3).5NH_(3).H_(2)O`. Electrical coductance measurements indicate the presence of three ions in one for

Description : A six co-ordinate complex has the formula `CoCl_(3).5NH_(3).H_(2)O`. Electrical coductance measurements indicate the presence of three ions in one for

Last Answer : A six co-ordinate complex has the formula `CoCl_(3).5NH_(3).H_(2)O`. Electrical coductance measurements indicate the ... complex? A. 3 B. 2 C. 4 D. 1

Which of the following compounds has ionic bond. `pi-`bond, co-ordinate bond and covalent bond:-

Description : Which of the following compounds has ionic bond. `pi-`bond, co-ordinate bond and covalent bond:-

Last Answer : Which of the following compounds has ionic bond. `pi-`bond, co-ordinate bond and covalent bond:- A. `HNO_(2)` B. `NaNO_(3)` C. `KNO_(2)` D. `MgCl_(2)`

In a cartesian co-ordinate system, the coordinates of two points P and Q are (2, 4, 4) and (-2, -3, 7) respectively

Description : In a cartesian co-ordinate system, the coordinates of two points P and Q are (2, 4, 4) and (-2, -3, 7) respectively

Last Answer : In a cartesian co-ordinate system, the coordinates of two points P and Q are (2, 4, 4) ... find \(\overset\longrightarrow{PQ}\) and its magnitude.