The co-ordinate of a point measured perpendicular to the parallel, is called (A) Total latitude (B) Meridian distance (C) Total departure (D) Consecutive co-ordinate

The co-ordinate of a point measured perpendicular to the parallel, is called
(A) Total latitude
(B) Meridian distance
(C) Total departure
(D) Consecutive co-ordinate
by

1 Answer

Answer :

(A) Total latitude
by

Related questions

The orthographical projection of a traverse leg upon the reference meridian, is known as (A) Departure of leg (B) Latitude to the leg (C) Co-ordinate of the leg (D) Bearing of the leg

Description : The orthographical projection of a traverse leg upon the reference meridian, is known as (A) Departure of leg (B) Latitude to the leg (C) Co-ordinate of the leg (D) Bearing of the leg

Last Answer : (B) Latitude to the leg

To set out a parallel from a given inaccessible point to a given line AB, the following observations are made: Distance AB and angle PAM = a and angle PBA = b are measured where M is a point on the line BA produced. The perpendicular to the desired parallel line from A and B are: (A) AB/(cot b - cot a) (B) AB/(cos b - cos a) (C) AB/(cot a - cot b) (D) AB/(cot a - cos b)

Description : To set out a parallel from a given inaccessible point to a given line AB, the following observations are made: Distance AB and angle PAM = a and angle PBA = b are measured where M is a point on the line BA produced. The ... cos b - cos a) (C) AB/(cot a - cot b) (D) AB/(cot a - cos b)

Last Answer : (A) AB/(cot b - cot a)

Magnetic Meridian is a – (1) Line parallel to the equator of the Earth (2) Latitude (3) Line joining the geographic north and geographic south of Earth (4) Plane passing through the magnetic north and magnetic south of Earth

Description : Magnetic Meridian is a – (1) Line parallel to the equator of the Earth (2) Latitude (3) Line joining the geographic north and geographic south of Earth (4) Plane passing through the magnetic north and magnetic south of Earth

Last Answer : (4) Plane passing through the magnetic north and magnetic south of Earth Explanation: Magnetic Meridian is a line on the earth's surface approximating a great circle passing through the north and south ... lines along the surface of the earth. A compass needle is parallel to the magnetic meridian.

Magnetic Meridian is a (1) Line parallel to the equator of the Earth (2) Latitude (3) Line joining the geographic north and geographic south of Earth (4) Plane passing through the magnetic north and magnetic south of Earth

Description : Magnetic Meridian is a (1) Line parallel to the equator of the Earth (2) Latitude (3) Line joining the geographic north and geographic south of Earth (4) Plane passing through the magnetic north and magnetic south of Earth

Last Answer : Plane passing through the magnetic north and magnetic south of Earth

If the reduced bearing of a line AB is N60°W and length is 100 m, then the latitude and departure respectively of the line AB will be (A) +50 m, +86.6 m (B) +86.6 m, -50 m (C) +50 m, -86.6 m (D) +70.7 m, -50 m

Description : If the reduced bearing of a line AB is N60°W and length is 100 m, then the latitude and departure respectively of the line AB will be (A) +50 m, +86.6 m (B) +86.6 m, -50 m (C) +50 m, -86.6 m (D) +70.7 m, -50 m

Last Answer : (B) +86.6 m, -50 m

Total latitude of a point is positive if it lies (A) North of the reference parallel (B) South of the reference parallel (C) East of the reference parallel (D) West of the reference parallel

Description : Total latitude of a point is positive if it lies (A) North of the reference parallel (B) South of the reference parallel (C) East of the reference parallel (D) West of the reference parallel

Last Answer : (A) North of the reference parallel

Grid lines are parallel to (A) Magnetic meridian of the central point of the grid (B) Line representing the central true meridian of the grid (C) Geographical equator (D) None of these

Description : Grid lines are parallel to  (A) Magnetic meridian of the central point of the grid  (B) Line representing the central true meridian of the grid  (C) Geographical equator  (D) None of these

Last Answer : (B) Line representing the central true meridian of the grid

Marketing planning is a continuous process because A)marketing activities must parallel those of competitors. B)the time frame of plans must co -ordinate with the time frame of marketing controls. C)to have effective control, new control processes must be introduced. D)plans must be changed as forces in the marketing environment change. E)marketing managers tend to develop marketing myopia and focus on short -term plans.

Description : Marketing planning is a continuous process because A)marketing activities must parallel those of competitors. B)the time frame of plans must co -ordinate with the time frame of marketing controls. C ... change. E)marketing managers tend to develop marketing myopia and focus on short -term plans.

Last Answer : E)marketing managers tend to develop marketing myopia and focus on short -term plans.

Reduced bearing of a line is an angle between (A) North line and given line measured clockwise (B) North line and given line measured anticlockwise (C) East or west and the given line (D) Given line and the part of the meridian whether N end or S end, lying adjacent to it

Description : Reduced bearing of a line is an angle between (A) North line and given line measured clockwise (B) North line and given line measured anticlockwise (C) East or west and the given line (D) Given line and the part of the meridian whether N end or S end, lying adjacent to it

Last Answer : (D) Given line and the part of the meridian whether N end or S end, lying adjacent to it

Define Latitude and Departure.

Description : Define Latitude and Departure. 

Last Answer : Latitude : The projection of survey line parallel to meridian is called latitude. OR Projection of survey line parallel to N-S direction is called latitude. Departure: The projection of survey ... is called departure. OR Projection of survey line parallel to E-W direction is called departure.

Define the term departure and latitude

Description : Define the term departure and latitude

Last Answer : Departure :- It is the distance parallel to the East-West line OR the projection of survey line perpendicular to the meridian is called departure. Latitude :- It is the distance parallel to the North-South line OR the projection of survey line parallel to the meridian is called latitude.

Define the terms- latitude and departure.

Description : Define the terms- latitude and departure. 

Last Answer :  Latitude – The projective distance of survey line parallel to meridian (i.e. N-S direction) is known as Latitude of a line. Departure - The projective distance of survey line perpendicular to meridian (i.e. N-S direction) is known as Departure of a line.

The distance between the starts of two consecutive coils measured in terms of coil sides is called (a) front pitch (b) winding pitch (c) commutator pitch (d) back pitch

Description : The distance between the starts of two consecutive coils measured in terms of coil sides is called (a) front pitch (b) winding pitch (c) commutator pitch (d) back pitch

Last Answer : (b) winding pitch

What is the latitude and longitude when the equator and the original meridian intersect ?

Description : What is the latitude and longitude when the equator and the original meridian intersect ?

Last Answer : When the equator and the original meridian intersect, the latitude and longitude are 0 degrees.

The angle between the magnetic meridian and the geographical meridian at a place is (1) Azimuth (2) Dip (3) Declination (4) Latitude

Description : The angle between the magnetic meridian and the geographical meridian at a place is (1) Azimuth (2) Dip (3) Declination (4) Latitude

Last Answer : (3) Declination Explanation: Magnetic declination is the angle between compass north (the direction the north end of a compass needle points) and true north (the direction along the earth's surface towards the geographic North Pole.

The angle between the magnetic meridian and the geographical meridian at a place is (1) Azimuth (2) Dip (3) Declination(4) Latitude

Description : The angle between the magnetic meridian and the geographical meridian at a place is (1) Azimuth (2) Dip (3) Declination(4) Latitude

Last Answer : Declination

True meridian of different places (A) Converge from the South Pole to the North Pole (B) Converge from the North Pole to the South Pole (C) Converge from the equator to the poles (D) Run parallel to each other

Description : True meridian of different places (A) Converge from the South Pole to the North Pole (B) Converge from the North Pole to the South Pole (C) Converge from the equator to the poles (D) Run parallel to each other

Last Answer : (C) Converge from the equator to the poles

Pick up the correct statement from the following: (A) If the slope of the curve of a mass diagram in the direction of increasing abscissa is downward, it indicates an embankment (B) The vertical distance between a maximum ordinate and the next forward maximum ordinate represents the whole volume of the embankment (C) The vertical distance between a minimum ordinate and the next forward maximum ordinate represents the whole volume of a cutting (D) All the above

Description : Pick up the correct statement from the following: (A) If the slope of the curve of a mass diagram in the direction of increasing abscissa is downward, it indicates an embankment (B) The ... and the next forward maximum ordinate represents the whole volume of a cutting (D) All the above

Last Answer : (D) All the above

For a ternary mixture, in which equilateral triangular co-ordinate is used in leaching and extraction, a __________ of the equilateral triangular co-ordinates. (A) Binary mixture is represented by the apex (B) Binary mixture is represented by any point inside (C) Ternary mixture is represented by the sides (D) Pure component is represented by the apex

Description : For a ternary mixture, in which equilateral triangular co-ordinate is used in leaching and extraction, a __________ of the equilateral triangular co-ordinates. (A) Binary mixture is ... Ternary mixture is represented by the sides (D) Pure component is represented by the apex

Last Answer : (D) Pure component is represented by the apex

If K is a constant depending upon the ratio of the width of the slab to its effective span l, x is the distance of the concentrated load from the nearer support, bw is the width of the area of contact of the concentrated load measured parallel to the supported edge, the effective width of the slab be is (A) K/x (1 + x/d) + bw (B) Kx (1 - x/l) + bw (C) Kx (1 + x/l) + bw (D) All the above

Description : If K is a constant depending upon the ratio of the width of the slab to its effective span l, x is the distance of the concentrated load from the nearer support, bw is the width of the area of contact of the concentrated load measured ... ) Kx (1 - x/l) + bw (C) Kx (1 + x/l) + bw (D) All the above

Last Answer : Answer: Option B

If total run off of a basin of 50 hectares is 0.8 cm, the ordinate of Bernard's distribution graph, may be calculated by the formula (where Q is the discharge in cumecs at the given time) (A) y = 50 Q (B) y = 100 Q (C) y = 200 Q (D) y = 250 Q

Description : If total run off of a basin of 50 hectares is 0.8 cm, the ordinate of Bernard's distribution graph, may be calculated by the formula (where Q is the discharge in cumecs at the given time) (A) y = 50 Q (B) y = 100 Q (C) y = 200 Q (D) y = 250 Q

Last Answer : Answer: Option D

The most reliable method of plotting a theodolite traverse, is (A) By consecutive co-ordinates of each station (B) By independent co-ordinates of each station (C) By plotting included angles and scaling off each traverse leg (D) By the tangent method of plotting

Description : The most reliable method of plotting a theodolite traverse, is (A) By consecutive co-ordinates of each station (B) By independent co-ordinates of each station (C) By plotting included angles and scaling off each traverse leg (D) By the tangent method of plotting

Last Answer : (B) By independent co-ordinates of each station

A cotter joint is used to connect two __________ rods. A. Co-axial B. Perpendicular C. Parallel D. None of these

Description : A cotter joint is used to connect two __________ rods. A. Co-axial B. Perpendicular C. Parallel D. None of these

Last Answer : A. Co-axial

Cotter joints is connected two ......... roads. A. Co - axial B. Parallel C. Perpendicular D. Inclined

Description : Cotter joints is connected two ......... roads. A. Co - axial B. Parallel C. Perpendicular D. Inclined

Last Answer : A. Co - axial

Cotter joints is connected two ......... roads. A. Co - axial B. Parallel C. Perpendicular D. Inclined

Description : Cotter joints is connected two ......... roads. A. Co - axial B. Parallel C. Perpendicular D. Inclined

Last Answer : A. Co - axial

If the distance between two consecutive base pairs is 0.34 nm and the total number of base pairs of a DNA double helix in a typical mammalian cell is 6.6 × 109 bp, then the length of the DNA is approximately (a) 2.0 meters (b) 2.5 meters (c) 2.2 meters (d) 2.7 meters.

Description : If the distance between two consecutive base pairs is 0.34 nm and the total number of base pairs of a DNA double helix in a typical mammalian cell is 6.6 × 109 bp, then the length of the DNA is approximately (a) 2.0 meters (b) 2.5 meters (c) 2.2 meters (d) 2.7 meters.

Last Answer : (b) 2.5 meters

If the distance between two consecutive base pairs is 0.34 nm and the total number of base pairs of a DNA double helix in a typical mammalian cell is 6.6 × 109 bp, then the length of the DNA is approximately (a) 2.0 meters (b) 2.5 meters (c) 2.2 meters (d) 2.7 meters.

Description : If the distance between two consecutive base pairs is 0.34 nm and the total number of base pairs of a DNA double helix in a typical mammalian cell is 6.6 × 109 bp, then the length of the DNA is approximately (a) 2.0 meters (b) 2.5 meters (c) 2.2 meters (d) 2.7 meters.

Last Answer : (c) 2.2 meters

Contour interval is (A) The vertical distance between two consecutive contours (B) The horizontal distance between two consecutive contours (C) The vertical distance between two points on same contour (D) The horizontal distance between two points on same contour

Description : Contour interval is (A) The vertical distance between two consecutive contours (B) The horizontal distance between two consecutive contours (C) The vertical distance between two points on same contour (D) The horizontal distance between two points on same contour

Last Answer : (A) The vertical distance between two consecutive contours

If L is the length of vehicles in metres, C is the clear distance between two consecutive vehicles (stopping sight distance), V is the speed of vehicles in km/hour, the maximum number N of vehicles/hour, is (A) N = 1000 V / (L + C) (B) N = (L + C) / 1000 V (C) N = 1000 L / (C + V) (D) N = 1000 C / (L + V)

Description : If L is the length of vehicles in metres, C is the clear distance between two consecutive vehicles (stopping sight distance), V is the speed of vehicles in km/hour, the maximum number N of vehicles/hour, is (A) N = 1000 V / (L + C ... ) / 1000 V (C) N = 1000 L / (C + V) (D) N = 1000 C / (L + V)

Last Answer : Answer: Option A

In the mid-section formula (A) The mean depth is the average of depths of two consecutive sections (B) The area of mid-sections is calculated by using mean depth (C) The volume of the earth work is calculated by multiplying the mid-section area by the distance between the two original sections (D) All of the above

Description : In the mid-section formula (A) The mean depth is the average of depths of two consecutive sections (B) The area of mid-sections is calculated by using mean depth (C) The volume of the ... multiplying the mid-section area by the distance between the two original sections (D) All of the above

Last Answer : (D) All of the above

The magnetic meridian at any point, is the direction indicated by a freely suspended (A) Magnetic needle (B) And properly balanced magnetic needle (C) Properly balanced and uninfluenced by local attractive force (D) Magnetic needle over an iron pivot

Description : The magnetic meridian at any point, is the direction indicated by a freely suspended (A) Magnetic needle (B) And properly balanced magnetic needle (C) Properly balanced and uninfluenced by local attractive force (D) Magnetic needle over an iron pivot

Last Answer : (C) Properly balanced and uninfluenced by local attractive force

Any convenient co-ordinate system or Cartesian co-ordinates which can be usedto define the picture is called a.spherical co-ordinates b.vector co-ordinates c.viewport co-ordinates d.world co-ordinates

Description : Any convenient co-ordinate system or Cartesian co-ordinates which can be usedto define the picture is called a.spherical co-ordinates b.vector co-ordinates c.viewport co-ordinates d.world co-ordinates

Last Answer : d.world co-ordinates

The window opened on the raster graphics screen in which the image will bedisplayed is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Description : The window opened on the raster graphics screen in which the image will bedisplayed is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Last Answer : d.Interface window

The object space or the space in which the application model is defined is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Description : The object space or the space in which the application model is defined is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Last Answer : a.World co-ordinate system

Activity co-efficient is a measure of the (A) Departure from ideal solution behaviour (B) Departure of gas phase from ideal gas law (C) Vapour pressure of liquid (D) None of these

Description : Activity co-efficient is a measure of the (A) Departure from ideal solution behaviour (B) Departure of gas phase from ideal gas law (C) Vapour pressure of liquid (D) None of these

Last Answer : (A) Departure from ideal solution behaviour

By changing the dimensions of the viewport, the and ofthe objects being displayed can be manipulated. a.Number of pixels and image quality b.X co-ordinate and Y co-ordinate c.Size and proportions d.All of these

Description : By changing the dimensions of the viewport, the and ofthe objects being displayed can be manipulated. a.Number of pixels and image quality b.X co-ordinate and Y co-ordinate c.Size and proportions d.All of these

Last Answer : c.Size and proportions

What is the rectangle in the world defining the region that is to be displayed? a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Description : What is the rectangle in the world defining the region that is to be displayed? a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Last Answer : c.World window

What is the name of the space in which the image is displayed? a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Description : What is the name of the space in which the image is displayed? a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Last Answer : b.Screen co-ordinate system

Which of this is compulsory for 2D reflection? a.Reflection plane. b.Origin c.Reflection axis d.Co-ordinate axis.

Description : Which of this is compulsory for 2D reflection? a.Reflection plane. b.Origin c.Reflection axis d.Co-ordinate axis.

Last Answer : c.Reflection axis

Find the co-ordinate where the equation 2x + 3y = 6 intersects x-axis. -Maths 9th

Description : Find the co-ordinate where the equation 2x + 3y = 6 intersects x-axis. -Maths 9th

Last Answer : Solution :-

Write the linear equation represented by line AB and PQ. Also find the co-ordinate of intersection of line AB and PQ. -Maths 9th

Description : Write the linear equation represented by line AB and PQ. Also find the co-ordinate of intersection of line AB and PQ. -Maths 9th

Last Answer : Solution :-

Draw the graph of the equation 3x + 4y = 12 and find the co-ordinates of the points of intersection of the equation with the co-ordinate axes. -Maths 9th

Description : Draw the graph of the equation 3x + 4y = 12 and find the co-ordinates of the points of intersection of the equation with the co-ordinate axes. -Maths 9th

Last Answer : Solution :-

Draw the bar graph of linear equation whose solution are represented by the points having difference the co-ordinate as 25 units -Maths 9th

Description : Draw the bar graph of linear equation whose solution are represented by the points having difference the co-ordinate as 25 units -Maths 9th

Last Answer : This answer was deleted by our moderators...

What do you mean by Co-ordinate Geometry? -Maths 9th

Description : What do you mean by Co-ordinate Geometry? -Maths 9th

Last Answer : (a) \(rac{2^n}{5^n}\)In any number the last digits can 0, 1, 2, 3, 4, 5, 6, 7, 8 and 9. Therefore, the last digit of each number can be chosen in 10 ways. ∴ Exhaustive number of ways = 10n. If the ... , favourable number of ways = 4n ∴ Required probability = \(rac{4^n}{10^n}\) = \(rac{2^n}{5^n}\).

What do you mean by Co-ordinates (Abscissa and Ordinate)? Explain with figure. -Maths 9th

Description : What do you mean by Co-ordinates (Abscissa and Ordinate)? Explain with figure. -Maths 9th

Last Answer : Co-ordinate Geometry is that branch of geometry in which two numbers, called co-ordinates are used to indicate the position of a point in a plane and which make use of algebraic methods in the study of geometric figures.

If (–5, 4) divides the line segment between the co-ordinate axes in the ratio 1 : 2, then what is its equation ? -Maths 9th

Description : If (–5, 4) divides the line segment between the co-ordinate axes in the ratio 1 : 2, then what is its equation ? -Maths 9th

Last Answer : (d) x = yThe equations of the given lines are: 4x + 3y = 12 ...(i) 3x + 4y = 12 ...(ii) Solving the simultaneous equations (i) and (ii), we get\(x\) = \(rac{12}{7}\), y = \(rac{12}{7}\)∴ Point of the ... )isy - 0 = \(\bigg(rac{rac{12}{7}-0}{rac{12}{7}-0}\bigg)\) (x - 0), i.e., y = x.

The straight line ax + by + c = 0 and the co-ordinate axes form an isosceles triangle under which of the following conditions ? -Maths 9th

Description : The straight line ax + by + c = 0 and the co-ordinate axes form an isosceles triangle under which of the following conditions ? -Maths 9th

Last Answer : (a) | a | = | b | The equation of line AB, i.e., ax + by + c = 0 in intercept form is ax + by = - c⇒ \(rac{x}{\big(-rac{c}{a}\big)}\) + \(rac{x}{\big(-rac{c}{b}\big)}\) = 1Δ AOB is isosceles Δ if OA = OB, i.e., ... \(rac{-c}{a}\) = \(rac{-c}{a}\) ⇒ \(rac{1}{a}\) = \(rac{1}{a}\) ⇒ | a | = | b |.

A particle moves along the curve `6y = x^3 + 2`. Find the points on the curve at which y-co-ordinate is changing 8 times as fast as the x-co-ordinate.

Description : A particle moves along the curve `6y = x^3 + 2`. Find the points on the curve at which y-co-ordinate is changing 8 times as fast as the x-co-ordinate.

Last Answer : A particle moves along the curve `6y = x^3 + 2`. Find the points on the curve at which y-co-ordinate is changing 8 times as fast as the x-co-ordinate.

A six co-ordinate complex has the formula `CoCl_(3).5NH_(3).H_(2)O`. Electrical coductance measurements indicate the presence of three ions in one for

Description : A six co-ordinate complex has the formula `CoCl_(3).5NH_(3).H_(2)O`. Electrical coductance measurements indicate the presence of three ions in one for

Last Answer : A six co-ordinate complex has the formula `CoCl_(3).5NH_(3).H_(2)O`. Electrical coductance measurements indicate the ... complex? A. 3 B. 2 C. 4 D. 1