Turbidity of raw water is a measure of (A) Suspended solids (B) Acidity of water (C) B.O.D. (D) None of these

Turbidity of raw water is a measure of 

(A) Suspended solids 

(B) Acidity of water 

(C) B.O.D. 

(D) None of these 

by

1 Answer

Answer :

(A) Suspended solids

by

Related questions

Turbidity of water is an indication of the presence of (A) Suspended inorganic matter (B) Dissolved solids (C) Floating solids (D) Dissolved gases

Description : Turbidity of water is an indication of the presence of (A) Suspended inorganic matter (B) Dissolved solids (C) Floating solids (D) Dissolved gases

Last Answer : (A) Suspended inorganic matter

Disappearance of pink colour of water of a well due of KMnO4 indicates that water contains (A) Acidity (B) Alkalinity (C) Turbidity (D) Organic matter

Description : Disappearance of pink colour of water of a well due of KMnO4 indicates that water contains (A) Acidity (B) Alkalinity (C) Turbidity (D) Organic matter

Last Answer : (D) Organic matter

Turbidity of water may be caused due to (A) Suspended clay (B) Suspended silt (C) Finely divided organic material (D) All the above

Description : Turbidity of water may be caused due to  (A) Suspended clay  (B) Suspended silt  (C) Finely divided organic material  (D) All the above 

Last Answer : (D) All the above 

Slow sand filter is used if maximum turbidity of raw water is less than (A) 10 gm/litre (B) 20 gm/litre (C) 30 gm/litre (D) 50 gm/litre

Description : Slow sand filter is used if maximum turbidity of raw water is less than (A) 10 gm/litre (B) 20 gm/litre (C) 30 gm/litre (D) 50 gm/litre

Last Answer : (D) 50 gm/litre

In slow sand filters, the turbidity of raw water can be removed only up to (A) 60 mg/litre (B) 75 mg/litre (C) 100 gm/litre (D) 150 mg/litre

Description : In slow sand filters, the turbidity of raw water can be removed only up to  (A) 60 mg/litre  (B) 75 mg/litre  (C) 100 gm/litre  (D) 150 mg/litre 

Last Answer : (A) 60 mg/litre 

Tri-sodium phosphate is used in boiler water treatment to reduce (A) Turbidity (B) Caustic embrittlement (C) Suspended silica (D) Dissolved oxygen

Description : Tri-sodium phosphate is used in boiler water treatment to reduce (A) Turbidity (B) Caustic embrittlement (C) Suspended silica (D) Dissolved oxygen

Last Answer : (B) Caustic embrittlement

The most detrimental impurity in high pressure boiler feed water is (A) Suspended salt (B) Dissolved salt (C) Silica (D) Turbidity

Description : The most detrimental impurity in high pressure boiler feed water is (A) Suspended salt (B) Dissolved salt (C) Silica (D) Turbidity

Last Answer : Option C

Foaming and priming in boiler operation can be reduced by reduction in __________ in feed water. (A) Turbidity (B) Color (Hazen) (C) Total solids (D) All (A), (B) & (C)

Description : Foaming and priming in boiler operation can be reduced by reduction in __________ in feed water. (A) Turbidity (B) Color (Hazen) (C) Total solids (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

During sewage treatment, effluent from which one of the following treatment units has minimum wt/vol amount of suspended solids? (a) Detritus channel (b) Primary sedimentation tank (c) Secondary sedimentation tank (d) Activated sludge process aeration tank

Description : During sewage treatment, effluent from which one of the following treatment units has minimum wt/vol amount of suspended solids? (a) Detritus channel (b) Primary sedimentation tank (c) Secondary sedimentation tank (d) Activated sludge process aeration tank

Last Answer : (d) Activated sludge process aeration tank

On nephelometry turbidity unit (NTU) is equal to the turbidity produced by (a) 1 mg SiO2 dissolved in 1 l of distilled water with the test being run according to absorption principle (b) 1 mg SiO2 dissolved in 1 l of distilled water with the test being run according t scattering principle (c) 1 mg Formazin dissolved in 1 l of distilled water with the test being run according to absorption principle (d) 1 mg Formazin dissolved in 1 l o f distilled water with the test being run according to scattering principle.

Description : On nephelometry turbidity unit (NTU) is equal to the turbidity produced by (a) 1 mg SiO2 dissolved in 1 l of distilled water with the test being run according to absorption principle (b) 1 ... Formazin dissolved in 1 l o f distilled water with the test being run according to scattering principle.

Last Answer : (d) 1 mg Formazin dissolved in 1 l o f distilled water with the test being run according to scattering principle.

The function of sedimentation tank in sewage treatment is to: (1) Disinfect the sewage (2) Remove water content (3) Aerate the sewage (4) Remove suspended solids

Description : The function of sedimentation tank in sewage treatment is to: (1) Disinfect the sewage (2) Remove water content (3) Aerate the sewage (4) Remove suspended solids

Last Answer : (4) Remove suspended solids Explanation: The function of sedimentation tank in the sewage treatment is to remove suspended solids.

Chlorination of water is done for the removal of A. Bacterias B. Suspended solids C. Sediments D. Hardness

Description : Chlorination of water is done for the removal of A. Bacterias B. Suspended solids C. Sediments D. Hardness

Last Answer : ANS: A

Steam condensate is recovered by steam traps and recycled for use as boiler feed water, because of its low (A) Hardness (B) Dissolved solids content (C) Suspended solids content (D) All (A), (B) and (C)

Description : Steam condensate is recovered by steam traps and recycled for use as boiler feed water, because of its low (A) Hardness (B) Dissolved solids content (C) Suspended solids content (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Presence of __________ in water stream are deleterious to aquatic life. (A) Soluble and toxic organics (B) Suspended solids (C) Heavy metals and cyanides(D) All (A), (B) & (C)

Description : Presence of __________ in water stream are deleterious to aquatic life. (A) Soluble and toxic organics (B) Suspended solids (C) Heavy metals and cyanides (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Coal washing waste water containing about 3% suspended solids (comprising of clay, slate, stone etc.) is treated for solid particles removal (A) By chemical coagulation (B) In sedimentation tanks equipped with mechanical scrapper (C) In vacuum filter (D) In clarifiers

Description : Coal washing waste water containing about 3% suspended solids (comprising of clay, slate, stone etc.) is treated for solid particles removal (A) By chemical coagulation (B) In sedimentation tanks equipped with mechanical scrapper (C) In vacuum filter (D) In clarifiers

Last Answer : (B) In sedimentation tanks equipped with mechanical scrapper

Removal of __________ is accomplished by aeration of water. (A) Dissolved gases (B) Suspended solids (C) Dissolved solids (D) None of these

Description : Removal of __________ is accomplished by aeration of water. (A) Dissolved gases (B) Suspended solids (C) Dissolved solids (D) None of these

Last Answer : (A) Dissolved gases

Which of the following is the most lethal water pollutant? (A) Phenol and cyanide (B) Chlorine(C) Alkalis(D) Suspended solids

Description : Which of the following is the most lethal water pollutant? (A) Phenol and cyanide (B) Chlorine (C) Alkalis (D) Suspended solids

Last Answer : (A) Phenol and cyanide

The function of sedimentation tank in sewage treatment is to: (1) Disinfect the sewage (2) Remove water content (3) Aerate the sewage (4) Remove suspended solids

Description : The function of sedimentation tank in sewage treatment is to: (1) Disinfect the sewage (2) Remove water content (3) Aerate the sewage (4) Remove suspended solids

Last Answer : Remove suspended solids

In domestic sewage, suspended solids, colloidal and dissolved materials constitute

Description : In domestic sewage, suspended solids, colloidal and dissolved materials constitute

Last Answer : In domestic sewage, suspended solids, colloidal and dissolved materials constitute A. 0.1 B. 0.056 C. 0.027 D. 0.001

The function of skimming tank in sewage treatment is to remove – (1) oil and fatty substances (2) suspended solids (3) gritty substances (4) inorganic substances

Description : The function of skimming tank in sewage treatment is to remove – (1) oil and fatty substances (2) suspended solids (3) gritty substances (4) inorganic substances

Last Answer : (1) oil and fatty substances Explanation: Oil and grease traps are small size skimming basins provided to remove oil and grease and other small floating materials such as fats, vegetable debris, ... content of wastewater rise to the surface of wastewater and remains on top of liquid until removed.

Imhoff cone is used to determine A. Settleable solids B. Suspended solids C. Dissolved solids D. None of these

Description : Imhoff cone is used to determine A. Settleable solids B. Suspended solids C. Dissolved solids D. None of these

Last Answer : ANS: A

The effluent of a septic tank is A. Fit for discharge into any open drain B. Foul and contains dissolved and suspended solids C. As good as that from a complete treatment D. None of these

Description : The effluent of a septic tank is A. Fit for discharge into any open drain B. Foul and contains dissolved and suspended solids C. As good as that from a complete treatment D. None of these

Last Answer : ANS: A

Primary treatment of sewage consists of removal of A. Large suspended organic solids B. Oil and grease C. Sand and girt D. Floating materials

Description : Primary treatment of sewage consists of removal of A. Large suspended organic solids B. Oil and grease C. Sand and girt D. Floating materials

Last Answer : ANS: A

Tabular bowl centrifuges as compared to disk bowl centrifuges (A) Operate at higher speed (B) Employ bowl of larger diameter (C) Can’t be operated under pressure/vacuum (D) Can’t be used for separation of fine suspended solids from a liquid

Description : Tabular bowl centrifuges as compared to disk bowl centrifuges (A) Operate at higher speed (B) Employ bowl of larger diameter (C) Can’t be operated under pressure/vacuum (D) Can’t be used for separation of fine suspended solids from a liquid

Last Answer : (A) Operate at higher speed

Which of the following is the most suitable filter for separation ofabrasive solids suspended in a corrosive liquid?(A) Sand bed filter(B) Plate and frame filter press(C) Vacuum filter(D) Batch basket centrifuge

Description : Which of the following is the most suitable filter for separation ofabrasive solids suspended in a corrosive liquid? (A) Sand bed filter (B) Plate and frame filter press (C) Vacuum filter (D) Batch basket centrifuge

Last Answer : (C) Vacuum filter

A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Description : A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Last Answer : (A) Incurs smaller pressure drop

The domestic sewage in large cities (a) has a high BOD as it contains both aerobic and anaerobic bacteria (b) is processed by aerobic and then anaerobic bacteria in the secondary treatment in Sewage Treatment Plants (STPs) (c) when treated in STPs does not really require the aeration step as the sewage contains adequate oxygen (d) has very high amount of suspended solids and dissolved salts.

Description : The domestic sewage in large cities (a) has a high BOD as it contains both aerobic and anaerobic bacteria (b) is processed by aerobic and then anaerobic bacteria in the secondary treatment in ... sewage contains adequate oxygen (d) has very high amount of suspended solids and dissolved salts.

Last Answer : (b) is processed by aerobic and then anaerobic bacteria in the secondary treatment in Sewage Treatment Plants (STPs)

Which of the following in sewage treatment removes suspended solids?(a) Secondary treatment (b) Primary treatment (c) Sludge treatment (d) Tertiary treatment

Description : Which of the following in sewage treatment removes suspended solids? (a) Secondary treatment (b) Primary treatment (c) Sludge treatment (d) Tertiary treatment

Last Answer : (b) Primary treatment

Which of the following is the most efficient for removal of very finely divided suspended solids and colloidal matter from the polluted waterstream?(A) Sedimentation tank(B) Circular clarifier(C) Mechanical flocculation(D) Chemical coagulation

Description : Which of the following is the most efficient for removal of very finely divided suspended solids and colloidal matter from the polluted waterstream? (A) Sedimentation tank (B) Circular clarifier (C) Mechanical flocculation (D) Chemical coagulation

Last Answer : (D) Chemical coagulation

Which of the following in sewage treatment removes suspended solids ? (1) Secondary treatment (2) Primary treatment (3) Sludge treatment (4) Tertiary treatment

Description : Which of the following in sewage treatment removes suspended solids ? (1) Secondary treatment (2) Primary treatment (3) Sludge treatment (4) Tertiary treatment

Last Answer : (2) Primary treatment

The function of skimming tank in sewage treatment is to remove (1) oil and fatty substances (2) suspended solids (3) gritty substances (4) inorganic substances

Description : The function of skimming tank in sewage treatment is to remove (1) oil and fatty substances (2) suspended solids (3) gritty substances (4) inorganic substances

Last Answer : oil and fatty substances

The resistance of water to the passage of light through it is a measure of the (A) Turbidity (B) Color (C) Hardness (D) Dissolved gases

Description : The resistance of water to the passage of light through it is a measure of the (A) Turbidity (B) Color (C) Hardness (D) Dissolved gases

Last Answer : (A) Turbidity

Direct methods to measure bacterial growth would include all the following except the a. total bacterial count b. microscopic count c. turbidity measurements d. most probable number

Description : Direct methods to measure bacterial growth would include all the following except the a. total bacterial count b. microscopic count c. turbidity measurements d. most probable number

Last Answer : c. turbidity measurements

How to measure the acidity and basicity of a substances?

Description : How to measure the acidity and basicity of a substances?

Last Answer : The pH of a solution is a measure of the molar concentration of hydrogen ions in the solution and as such is a measure of the acidity or basicity of the solution. The letters pH stand for power of ... value for pH is just the negative of the power of 10 of the molar concentration of H+ ions.

The pH scale relates the measure of _______ of a chemical substance. a. ionization b. denaturation c. acidity d. buffering

Description : The pH scale relates the measure of _______ of a chemical substance. a. ionization b. denaturation c. acidity d. buffering

Last Answer : c. acidity

Disinfection of drinking water, is done to remove (A) Odour (B) Bacterias (C) Turbidity (D) Colour

Description : Disinfection of drinking water, is done to remove (A) Odour (B) Bacterias (C) Turbidity (D) Colour

Last Answer : (B) Bacterias

Filtration of water is done to remove (A) Colour (B) Odour (C) Turbidity (D) Pathogenic bacteria

Description : Filtration of water is done to remove (A) Colour (B) Odour (C) Turbidity (D) Pathogenic bacteria

Last Answer : (C) Turbidity

Disinfection of drinking water is done to remove (A) Turbidity (B) Odour (C) Colour (D) Bacterias

Description : Disinfection of drinking water is done to remove (A) Turbidity (B) Odour (C) Colour (D) Bacterias

Last Answer : (D) Bacterias

Rapid gravity filter can only remove turbidity of water upto (A) 15 to 25 gm/litre (B) 25 to 30 gm/litre (C) 30 to 35 cm/litre (D) 35 to 40 gm/litre

Description : Rapid gravity filter can only remove turbidity of water upto (A) 15 to 25 gm/litre (B) 25 to 30 gm/litre (C) 30 to 35 cm/litre (D) 35 to 40 gm/litre

Last Answer : (D) 35 to 40 gm/litre

Hard water for public water supply is discarded because (A) It consumes more soap (B) It contains lot of turbidity (C) It contains pathogenic bacterias (D) It possesses bad taste and odour

Description : Hard water for public water supply is discarded because (A) It consumes more soap (B) It contains lot of turbidity (C) It contains pathogenic bacterias (D) It possesses bad taste and odour

Last Answer : (A) It consumes more soap

Low turbidity of water is detected by (A) Turbidity tube (B) Jackson turbidity mete(C) Baylis turbidimeter (D) Hellige turbidimeter

Description : Low turbidity of water is detected by  (A) Turbidity tube  (B) Jackson turbidity mete (C) Baylis turbidimeter  (D) Hellige turbidimeter 

Last Answer : (C) Baylis turbidimeter

Turbidity of water is expressed (A) In ppm (B) In numbers in an arbitrary scale (C) By pH value (D) By colour code

Description : Turbidity of water is expressed  (A) In ppm  (B) In numbers in an arbitrary scale  (C) By pH value  (D) By colour code 

Last Answer : (A) In ppm

Aeration of water is done to remove (A) Odour (B) Colour (C) Bacterias (D) Turbidity

Description : Aeration of water is done to remove  (A) Odour  (B) Colour  (C) Bacterias  (D) Turbidity 

Last Answer : (A) Odour 

Standard unit of turbidity of water is in one litre of distilled water, one milligram of finely divided (A) Silica (B) Mud (C) Clay (D) Organic matter

Description : Standard unit of turbidity of water is in one litre of distilled water, one milligram of finely divided  (A) Silica  (B) Mud  (C) Clay  (D) Organic matter 

Last Answer : (A) Silica 

Hardness of water is caused by (A) Presence of soap lather (B) Presence of chlorides and sulphates of sodium and potassium (C) Presence of bicarbonates, sulphates or chlorides of calcium and magnesium (D) Turbidity

Description : Hardness of water is caused by  (A) Presence of soap lather  (B) Presence of chlorides and sulphates of sodium and potassium  (C) Presence of bicarbonates, sulphates or chlorides of calcium and magnesium  (D) Turbidity 

Last Answer : (C) Presence of bicarbonates, sulphates or chlorides of calcium and magnesium 

In a rapid sand filter, air binding is caused due to excessive (A) Negative pressure (B) Pressure (C) Turbidity (D) Water pressure

Description : In a rapid sand filter, air binding is caused due to excessive  (A) Negative pressure  (B) Pressure  (C) Turbidity  (D) Water pressure

Last Answer : (A) Negative pressure

Recuperation test is carried out to determine (A) Turbidity of water (B) pH value of water (C) Yield of well (D) Discharge from a well

Description : Recuperation test is carried out to determine  (A) Turbidity of water  (B) pH value of water  (C) Yield of well  (D) Discharge from a well 

Last Answer : (A) Turbidity of water 

Consider the following statements. The following factors relate to the process of coagulation : 1. Percentage removal is higher when turbidity is more 2. Additional of activated silica aids in the process of coagulation 3. pH of water is an important consideration for selecting a coagulant Which of the following statements are correct ? a) 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Description : Consider the following statements. The following factors relate to the process of coagulation : 1. Percentage removal is higher when turbidity is more 2. Additional of activated silica aids in the process of coagulation 3. pH of water ... 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Last Answer : a) 1, 2 and 3

To detect the turbidity of the order of 0 to 1000 P.P.M. the instrument used is (A) Turbidimeter (B) Jackson turbidimeter (C) Baylis turbidimeter (D) Hellige turbidimeter

Description : To detect the turbidity of the order of 0 to 1000 P.P.M. the instrument used is (A) Turbidimeter (B) Jackson turbidimeter (C) Baylis turbidimeter (D) Hellige turbidimeter

Last Answer : (C) Baylis turbidimeter

Carbonates in water produce (A) Temporary hardness (B) Permanent hardness (C) Acidity (D) Alkanity

Description : Carbonates in water produce (A) Temporary hardness (B) Permanent hardness (C) Acidity (D) Alkanity

Last Answer : (A) Temporary hardness