Tabular bowl centrifuges as compared to disk bowl centrifuges (A) Operate at higher speed (B) Employ bowl of larger diameter (C) Can’t be operated under pressure/vacuum (D) Can’t be used for separation of fine suspended solids from a liquid

Tabular bowl centrifuges as compared to disk bowl centrifuges
(A) Operate at higher speed
(B) Employ bowl of larger diameter
(C) Can’t be operated under pressure/vacuum
(D) Can’t be used for separation of fine suspended solids from a liquid
by

1 Answer

Answer :

(A) Operate at higher speed
by

Related questions

Which of the following is the most suitable filter for separation ofabrasive solids suspended in a corrosive liquid?(A) Sand bed filter(B) Plate and frame filter press(C) Vacuum filter(D) Batch basket centrifuge

Description : Which of the following is the most suitable filter for separation ofabrasive solids suspended in a corrosive liquid? (A) Sand bed filter (B) Plate and frame filter press (C) Vacuum filter (D) Batch basket centrifuge

Last Answer : (C) Vacuum filter

Ultra centrifuges are used for the separation of __________ solid particles. (A) Coarse (B) Fine (C) Colloidal (D) Dissolved

Description : Ultra centrifuges are used for the separation of __________ solid particles. (A) Coarse (B) Fine (C) Colloidal (D) Dissolved

Last Answer : (C) Colloidal

Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation (B) Cavitation may be caused due to boiling of liquid by decreasing the pressure resulting in formation & collapse of vapor cavities (C) Cavitation begins at higher static pressure and lower velocity in larger diameter pipelines resulting in audible noise(D) Large scale cavitation cannot damage pipeline, restrict fluid flow anddamage steam turbine blades

Description : Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation ... (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Last Answer : (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Description : A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Last Answer : (A) Incurs smaller pressure drop

Coal washing waste water containing about 3% suspended solids (comprising of clay, slate, stone etc.) is treated for solid particles removal (A) By chemical coagulation (B) In sedimentation tanks equipped with mechanical scrapper (C) In vacuum filter (D) In clarifiers

Description : Coal washing waste water containing about 3% suspended solids (comprising of clay, slate, stone etc.) is treated for solid particles removal (A) By chemical coagulation (B) In sedimentation tanks equipped with mechanical scrapper (C) In vacuum filter (D) In clarifiers

Last Answer : (B) In sedimentation tanks equipped with mechanical scrapper

__________ centrifuge is the most suitable for separation of non-friable crystals. (A) Tubular bowl (B) Disc-bowl (C) Perforated horizontal basket continuous (D) Suspended batch baske

Description : __________ centrifuge is the most suitable for separation of non-friable crystals. (A) Tubular bowl (B) Disc-bowl (C) Perforated horizontal basket continuous (D) Suspended batch baske

Last Answer : (C) Perforated horizontal basket continuous

Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is important in problems involving gas absorption without chemical reaction (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion (D) Total reflux in case of distillation operation requires infinite number of plates for a binary system separation

Description : Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is ... reflux in case of distillation operation requires infinite number of plates for a binary system separation

Last Answer : (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion

Out of two equilibrium curves, first one lies above the diagonal and the second lies below the diagonal in the x-y plot. It means that separation by distillation is(A) Not possible in the second case unless vacuum is applied(B) Not possible in the second case unless high pressure is applied(C) More readily done in the second case compared to first one(D) None of these

Description : Out of two equilibrium curves, first one lies above the diagonal and the second lies below the diagonal in the x-y plot. It means that separation by distillation is (A) Not possible in the second ... (C) More readily done in the second case compared to first one (D) None of these

Last Answer : (C) More readily done in the second case compared to first one

Separation of isotopes is generally done using a/an __________ centrifuge. (A) Ultra (B) Disk-bowl (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Separation of isotopes is generally done using a/an __________ centrifuge. (A) Ultra (B) Disk-bowl (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Ultra

A tube mill compared to a ball mill (A) Has a higher length/diameter ratio(B) Produces a coarser product(C) Has a higher diameter/length ratio(D) Uses much larger balls

Description : A tube mill compared to a ball mill (A) Has a higher length/diameter ratio (B) Produces a coarser product (C) Has a higher diameter/length ratio (D) Uses much larger balls

Last Answer : (A) Has a higher length/diameter ratio

Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a distillation column (C) Separation of components is not possible in liquid extraction, if selectivity is unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Description : Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a ... unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Last Answer : (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Separation of solid suspended in liquid into a supernatant clear liquid and a denser slurry employs a process termed as the (A) Coagulation (B) Flocculation (C) Sedimentation (D) Clarification

Description : Separation of solid suspended in liquid into a supernatant clear liquid and a denser slurry employs a process termed as the (A) Coagulation (B) Flocculation (C) Sedimentation (D) Clarification

Last Answer : (C) Sedimentation

Reciprocating pumps compared to centrifugal pumps (A) Deliver liquid at uniform pressure (B) Can handle slurries more efficiently (C) Are not subject to air binding (D) Can be operated with delivery valve closed

Description : Reciprocating pumps compared to centrifugal pumps (A) Deliver liquid at uniform pressure (B) Can handle slurries more efficiently (C) Are not subject to air binding (D) Can be operated with delivery valve closed

Last Answer : (C) Are not subject to air binding

Pick out the wrong statement. (A) More commonly used jaw crusher between Dodge jaw crusher and Blake jaw crusher is the later one(B) There are only four methods namely compression, impact, attrition andcutting, which the size reduction equipments employ(C) Cutting machines mainly employ 'attrition' for size reduction of solids(D) Operating principles of Dodge and Blake jaw crushers are combined inthe working of universal jaw crushers

Description : Pick out the wrong statement. (A) More commonly used jaw crusher between Dodge jaw crusher and Blake jaw crusher is the later one (B) There are only four methods namely compression, impact ... Operating principles of Dodge and Blake jaw crushers are combined in the working of universal jaw crushers

Last Answer : (C) Cutting machines mainly employ 'attrition' for size reduction of solids

In Lurgi coal gasifier, (A) Coking coals cannot be used (B) Low carbon conversion efficiency is achieved (C) Entrainment of solids is higher (D) Larger quantity of coal can be processed

Description : In Lurgi coal gasifier, (A) Coking coals cannot be used (B) Low carbon conversion efficiency is achieved (C) Entrainment of solids is higher (D) Larger quantity of coal can be processed

Last Answer : (D) Larger quantity of coal can be processed

The capacity of double-effect evaporator is less than half of the capacity of two single effects, each of which is operating over same terminal temperature difference, when the (A) Solution has an elevation of boiling point (B) Evaporators operate under vacuum (C) Evaporators operate at atmospheric pressure (D) None of these

Description : The capacity of double-effect evaporator is less than half of the capacity of two single effects, each of which is operating over same terminal temperature difference, when the (A) Solution has ... B) Evaporators operate under vacuum (C) Evaporators operate at atmospheric pressure (D) None of these

Last Answer : (A) Solution has an elevation of boiling point

The separation of liquid droplets from the vapor is done by a/an __________, in the evaporators. (A) Steam ejector (B) Entrainment separator (C) Compressor (D) Vacuum pump

Description : The separation of liquid droplets from the vapor is done by a/an __________, in the evaporators. (A) Steam ejector (B) Entrainment separator (C) Compressor (D) Vacuum pump

Last Answer : (B) Entrainment separator

Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the possibility of tower wall collapse (B) Packed towers are preferred over plate towers for handling corrosive and foamy liquids (C) Diameter of randomly packed tower is normally more than 1.2 metres (D) Due to uneven supply and improper distribution of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Description : Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the ... of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Last Answer : (C) Diameter of randomly packed tower is normally more than 1.2 metres

Sound waves do not travel through _______. a) solids b)gases c)liquid d)vacuum

Description : Sound waves do not travel through _______. a) solids b)gases c)liquid d)vacuum

Last Answer : d)vacuum

Steam condensate is recovered by steam traps and recycled for use as boiler feed water, because of its low (A) Hardness (B) Dissolved solids content (C) Suspended solids content (D) All (A), (B) and (C)

Description : Steam condensate is recovered by steam traps and recycled for use as boiler feed water, because of its low (A) Hardness (B) Dissolved solids content (C) Suspended solids content (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Presence of __________ in water stream are deleterious to aquatic life. (A) Soluble and toxic organics (B) Suspended solids (C) Heavy metals and cyanides(D) All (A), (B) & (C)

Description : Presence of __________ in water stream are deleterious to aquatic life. (A) Soluble and toxic organics (B) Suspended solids (C) Heavy metals and cyanides (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Turbidity of water is an indication of the presence of (A) Suspended inorganic matter (B) Dissolved solids (C) Floating solids (D) Dissolved gases

Description : Turbidity of water is an indication of the presence of (A) Suspended inorganic matter (B) Dissolved solids (C) Floating solids (D) Dissolved gases

Last Answer : (A) Suspended inorganic matter

Removal of __________ is accomplished by aeration of water. (A) Dissolved gases (B) Suspended solids (C) Dissolved solids (D) None of these

Description : Removal of __________ is accomplished by aeration of water. (A) Dissolved gases (B) Suspended solids (C) Dissolved solids (D) None of these

Last Answer : (A) Dissolved gases

Which of the following is the most efficient for removal of very finely divided suspended solids and colloidal matter from the polluted waterstream?(A) Sedimentation tank(B) Circular clarifier(C) Mechanical flocculation(D) Chemical coagulation

Description : Which of the following is the most efficient for removal of very finely divided suspended solids and colloidal matter from the polluted waterstream? (A) Sedimentation tank (B) Circular clarifier (C) Mechanical flocculation (D) Chemical coagulation

Last Answer : (D) Chemical coagulation

Which of the following is the most lethal water pollutant? (A) Phenol and cyanide (B) Chlorine(C) Alkalis(D) Suspended solids

Description : Which of the following is the most lethal water pollutant? (A) Phenol and cyanide (B) Chlorine (C) Alkalis (D) Suspended solids

Last Answer : (A) Phenol and cyanide

In a shell and tube heat exchanger, square pitch compared to triangular pitch (A) Gives a higher shell side pressure drop (B) Gives a lower shell side pressure drop (C) Can pack more surface area into a shell of given diameter (D) None of these

Description : In a shell and tube heat exchanger, square pitch compared to triangular pitch (A) Gives a higher shell side pressure drop (B) Gives a lower shell side pressure drop (C) Can pack more surface area into a shell of given diameter (D) None of these

Last Answer : (A) Gives a higher shell side pressure drop

A tube mill as compared to a ball mill (A) Employs smaller balls (B) Gives finer size reduction but consumes more power (C) Has larger length/diameter ratio (>2 as compared to 1 for ball mill) (D) All (A), (B) and (C)

Description : A tube mill as compared to a ball mill (A) Employs smaller balls (B) Gives finer size reduction but consumes more power (C) Has larger length/diameter ratio (>2 as compared to 1 for ball mill) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Rod mills employed for grinding (A) Employ a steel shell having L/D ratio of 1.5 to 3.0 (B) Is useful for handling sticky materials (C) Employ steel rods of 2-12 cms diameter extending over full length of the mill (D) All 'a', 'b' & 'c'

Description : Rod mills employed for grinding (A) Employ a steel shell having L/D ratio of 1.5 to 3.0 (B) Is useful for handling sticky materials (C) Employ steel rods of 2-12 cms diameter extending over full length of the mill (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Description : Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Last Answer : (A) Gives higher yield of petrol

In reactions involving solids and liquids (where change in volume is negligible), the heat of reaction at constant pressure as compared to that at constant volume is (A) More (B) Less (C) Same (D) Unpredictable; depends on the particular reaction

Description : In reactions involving solids and liquids (where change in volume is negligible), the heat of reaction at constant pressure as compared to that at constant volume is (A) More (B) Less (C) Same (D) Unpredictable; depends on the particular reaction

Last Answer : (C) Same

__________ Centrifuge is normally used in sugar mills. (A) Tubular bowl (B) Disc-bowl (C) Suspended batch basket (D) Perforated horizontal basket continuous

Description : __________ Centrifuge is normally used in sugar mills. (A) Tubular bowl (B) Disc-bowl (C) Suspended batch basket (D) Perforated horizontal basket continuous

Last Answer : (C) Suspended batch basket

Septic tanks are used for the __________ of the deposited solids. (A) Separation (B) Anaerobic decomposition (C) Aerobic decomposition (D) None of these

Description : Septic tanks are used for the __________ of the deposited solids. (A) Separation (B) Anaerobic decomposition (C) Aerobic decomposition (D) None of these

Last Answer : (B) Anaerobic decomposition

In case of a ball mill, (A) Coarse feed requires a larger ball (B) Fine feed requires a larger ball (C) Operating speed should be more than the critical speed (D) None of these

Description : In case of a ball mill, (A) Coarse feed requires a larger ball (B) Fine feed requires a larger ball (C) Operating speed should be more than the critical speed (D) None of these

Last Answer : (A) Coarse feed requires a larger ball

In domestic sewage, suspended solids, colloidal and dissolved materials constitute

Description : In domestic sewage, suspended solids, colloidal and dissolved materials constitute

Last Answer : In domestic sewage, suspended solids, colloidal and dissolved materials constitute A. 0.1 B. 0.056 C. 0.027 D. 0.001

The function of skimming tank in sewage treatment is to remove – (1) oil and fatty substances (2) suspended solids (3) gritty substances (4) inorganic substances

Description : The function of skimming tank in sewage treatment is to remove – (1) oil and fatty substances (2) suspended solids (3) gritty substances (4) inorganic substances

Last Answer : (1) oil and fatty substances Explanation: Oil and grease traps are small size skimming basins provided to remove oil and grease and other small floating materials such as fats, vegetable debris, ... content of wastewater rise to the surface of wastewater and remains on top of liquid until removed.

The function of sedimentation tank in sewage treatment is to: (1) Disinfect the sewage (2) Remove water content (3) Aerate the sewage (4) Remove suspended solids

Description : The function of sedimentation tank in sewage treatment is to: (1) Disinfect the sewage (2) Remove water content (3) Aerate the sewage (4) Remove suspended solids

Last Answer : (4) Remove suspended solids Explanation: The function of sedimentation tank in the sewage treatment is to remove suspended solids.

Imhoff cone is used to determine A. Settleable solids B. Suspended solids C. Dissolved solids D. None of these

Description : Imhoff cone is used to determine A. Settleable solids B. Suspended solids C. Dissolved solids D. None of these

Last Answer : ANS: A

The effluent of a septic tank is A. Fit for discharge into any open drain B. Foul and contains dissolved and suspended solids C. As good as that from a complete treatment D. None of these

Description : The effluent of a septic tank is A. Fit for discharge into any open drain B. Foul and contains dissolved and suspended solids C. As good as that from a complete treatment D. None of these

Last Answer : ANS: A

Chlorination of water is done for the removal of A. Bacterias B. Suspended solids C. Sediments D. Hardness

Description : Chlorination of water is done for the removal of A. Bacterias B. Suspended solids C. Sediments D. Hardness

Last Answer : ANS: A

Primary treatment of sewage consists of removal of A. Large suspended organic solids B. Oil and grease C. Sand and girt D. Floating materials

Description : Primary treatment of sewage consists of removal of A. Large suspended organic solids B. Oil and grease C. Sand and girt D. Floating materials

Last Answer : ANS: A

The domestic sewage in large cities (a) has a high BOD as it contains both aerobic and anaerobic bacteria (b) is processed by aerobic and then anaerobic bacteria in the secondary treatment in Sewage Treatment Plants (STPs) (c) when treated in STPs does not really require the aeration step as the sewage contains adequate oxygen (d) has very high amount of suspended solids and dissolved salts.

Description : The domestic sewage in large cities (a) has a high BOD as it contains both aerobic and anaerobic bacteria (b) is processed by aerobic and then anaerobic bacteria in the secondary treatment in ... sewage contains adequate oxygen (d) has very high amount of suspended solids and dissolved salts.

Last Answer : (b) is processed by aerobic and then anaerobic bacteria in the secondary treatment in Sewage Treatment Plants (STPs)

Which of the following in sewage treatment removes suspended solids?(a) Secondary treatment (b) Primary treatment (c) Sludge treatment (d) Tertiary treatment

Description : Which of the following in sewage treatment removes suspended solids? (a) Secondary treatment (b) Primary treatment (c) Sludge treatment (d) Tertiary treatment

Last Answer : (b) Primary treatment

Turbidity of raw water is a measure of (A) Suspended solids (B) Acidity of water (C) B.O.D. (D) None of these

Description : Turbidity of raw water is a measure of  (A) Suspended solids  (B) Acidity of water  (C) B.O.D.  (D) None of these 

Last Answer : (A) Suspended solids

During sewage treatment, effluent from which one of the following treatment units has minimum wt/vol amount of suspended solids? (a) Detritus channel (b) Primary sedimentation tank (c) Secondary sedimentation tank (d) Activated sludge process aeration tank

Description : During sewage treatment, effluent from which one of the following treatment units has minimum wt/vol amount of suspended solids? (a) Detritus channel (b) Primary sedimentation tank (c) Secondary sedimentation tank (d) Activated sludge process aeration tank

Last Answer : (d) Activated sludge process aeration tank

Which of the following in sewage treatment removes suspended solids ? (1) Secondary treatment (2) Primary treatment (3) Sludge treatment (4) Tertiary treatment

Description : Which of the following in sewage treatment removes suspended solids ? (1) Secondary treatment (2) Primary treatment (3) Sludge treatment (4) Tertiary treatment

Last Answer : (2) Primary treatment

The function of sedimentation tank in sewage treatment is to: (1) Disinfect the sewage (2) Remove water content (3) Aerate the sewage (4) Remove suspended solids

Description : The function of sedimentation tank in sewage treatment is to: (1) Disinfect the sewage (2) Remove water content (3) Aerate the sewage (4) Remove suspended solids

Last Answer : Remove suspended solids

The function of skimming tank in sewage treatment is to remove (1) oil and fatty substances (2) suspended solids (3) gritty substances (4) inorganic substances

Description : The function of skimming tank in sewage treatment is to remove (1) oil and fatty substances (2) suspended solids (3) gritty substances (4) inorganic substances

Last Answer : oil and fatty substances

High temperature carbonisation of coal produces (A) Inferior coke compared to low temperature carbonisation(B) Less of gases compared to liquid products(C) Larger quantity of tar compared to low temperature carbonisation(D) None of these

Description : High temperature carbonisation of coal produces (A) Inferior coke compared to low temperature carbonisation (B) Less of gases compared to liquid products (C) Larger quantity of tar compared to low temperature carbonisation (D) None of these

Last Answer : (D) None of these

8.Distinguish among soda water, milk and muddy water in a tabular form under the following heads : (i)Stability (ii)Filterability (iii)Type of mixture (iv) Tyndall effect -Chemistry

Description : 8.Distinguish among soda water, milk and muddy water in a tabular form under the following heads : (i)Stability (ii)Filterability (iii)Type of mixture (iv) Tyndall effect -Chemistry

Last Answer : Here is the answer ..Sorry for bad handwriting...Hope it helps....They contain different types of minerals To achieve different tastes, club soda, sparkling, and tonic water cont A) homogeneity: ... . ... The main difference between the two is that tonic water also contains quinine and sweeteners.

What is the speed of particles in liquids compared to solids ?

Description : What is the speed of particles in liquids compared to solids ?

Last Answer : Liquid particles have a higher velocity than solids.