The resistance of water to the passage of light through it is a measure of the (A) Turbidity (B) Color (C) Hardness (D) Dissolved gases

The resistance of water to the passage of light through it is a measure of
the
(A) Turbidity
(B) Color
(C) Hardness
(D) Dissolved gases
by

1 Answer

Answer :

(A) Turbidity
by

Related questions

Turbidity of water is an indication of the presence of (A) Suspended inorganic matter (B) Dissolved solids (C) Floating solids (D) Dissolved gases

Description : Turbidity of water is an indication of the presence of (A) Suspended inorganic matter (B) Dissolved solids (C) Floating solids (D) Dissolved gases

Last Answer : (A) Suspended inorganic matter

Removal of __________ results from the disinfection of water. (A) Turbidity(B) Odour(C) Hardness(D) Bacteria

Description : Removal of __________ results from the disinfection of water. (A) Turbidity (B) Odour (C) Hardness (D) Bacteria

Last Answer : (D) Bacteria

Pick out the true statement pertaining to water treatment. (A) Slow sand filters can remove colour completely (B) Activated carbon can be used for taste & odour control without subsequent filtration (C) Application of activated carbon reduces the temporary hardness of water (D) Normally, the turbidity is removed by adding a coagulant prior to sedimentation

Description : Pick out the true statement pertaining to water treatment. (A) Slow sand filters can remove colour completely (B) Activated carbon can be used for taste & odour control without subsequent filtration ... of water (D) Normally, the turbidity is removed by adding a coagulant prior to sedimentation

Last Answer : (D) Normally, the turbidity is removed by adding a coagulant prior to sedimentation

Tri-sodium phosphate is used in boiler water treatment to reduce (A) Turbidity (B) Caustic embrittlement (C) Suspended silica (D) Dissolved oxygen

Description : Tri-sodium phosphate is used in boiler water treatment to reduce (A) Turbidity (B) Caustic embrittlement (C) Suspended silica (D) Dissolved oxygen

Last Answer : (B) Caustic embrittlement

Which of the following is the most detrimental for water used in high pressure boiler? (A) Silica (B) Turbidity (C) Phenol(D) Dissolved oxygen

Description : Which of the following is the most detrimental for water used in high pressure boiler? (A) Silica (B) Turbidity (C) Phenol (D) Dissolved oxygen

Last Answer : (A) Silica

Hydrazine is used in water treatment for the removal of (A) Colloidal impurities (B) Dissolved oxygen (C) Turbidity (D) Chlorinous taste

Description : Hydrazine is used in water treatment for the removal of (A) Colloidal impurities (B) Dissolved oxygen (C) Turbidity (D) Chlorinous taste

Last Answer : (B) Dissolved oxygen

The best guide to judge the general quality of water is the measurement of its (A) pH value (B) Electrical conductivity (C) Turbidity (D) Dissolved oxygen content

Description : The best guide to judge the general quality of water is the measurement of its (A) pH value (B) Electrical conductivity (C) Turbidity (D) Dissolved oxygen content

Last Answer : (B) Electrical conductivity

The most detrimental impurity in high pressure boiler feed water is (A) Suspended salt (B) Dissolved salt (C) Silica (D) Turbidity

Description : The most detrimental impurity in high pressure boiler feed water is (A) Suspended salt (B) Dissolved salt (C) Silica (D) Turbidity

Last Answer : Option C

Hardness of water is caused by (A) Presence of soap lather (B) Presence of chlorides and sulphates of sodium and potassium (C) Presence of bicarbonates, sulphates or chlorides of calcium and magnesium (D) Turbidity

Description : Hardness of water is caused by  (A) Presence of soap lather  (B) Presence of chlorides and sulphates of sodium and potassium  (C) Presence of bicarbonates, sulphates or chlorides of calcium and magnesium  (D) Turbidity 

Last Answer : (C) Presence of bicarbonates, sulphates or chlorides of calcium and magnesium 

Aeration Of water is done to remove a) Odour* b) Colour c) Bacterias d) Hardness e) Turbidity

Description : Aeration Of water is done to remove a) Odour* b) Colour c) Bacterias d) Hardness e) Turbidity

Last Answer : a) Odour*

On nephelometry turbidity unit (NTU) is equal to the turbidity produced by (a) 1 mg SiO2 dissolved in 1 l of distilled water with the test being run according to absorption principle (b) 1 mg SiO2 dissolved in 1 l of distilled water with the test being run according t scattering principle (c) 1 mg Formazin dissolved in 1 l of distilled water with the test being run according to absorption principle (d) 1 mg Formazin dissolved in 1 l o f distilled water with the test being run according to scattering principle.

Description : On nephelometry turbidity unit (NTU) is equal to the turbidity produced by (a) 1 mg SiO2 dissolved in 1 l of distilled water with the test being run according to absorption principle (b) 1 ... Formazin dissolved in 1 l o f distilled water with the test being run according to scattering principle.

Last Answer : (d) 1 mg Formazin dissolved in 1 l o f distilled water with the test being run according to scattering principle.

Steam condensate is recovered by steam traps and recycled for use as boiler feed water, because of its low (A) Hardness (B) Dissolved solids content (C) Suspended solids content (D) All (A), (B) and (C)

Description : Steam condensate is recovered by steam traps and recycled for use as boiler feed water, because of its low (A) Hardness (B) Dissolved solids content (C) Suspended solids content (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

. Presence of iron and manganese in water causes (A) Reduction in its dissolved oxygen content (B) Discoloration of bathroom fixtures (C) Temporary hardness (D) None of these

Description : . Presence of iron and manganese in water causes (A) Reduction in its dissolved oxygen content (B) Discoloration of bathroom fixtures (C) Temporary hardness (D) None of these

Last Answer : (B) Discoloration of bathroom fixtures

The ability of a material to offer resistance to scratching or indentation is a measure of its (A) Brittleness (B) Toughness (C) Hardness (D) Resilience

Description : The ability of a material to offer resistance to scratching or indentation is a measure of its (A) Brittleness (B) Toughness (C) Hardness (D) Resilience

Last Answer : (C) Hardness

Foaming and priming in boiler operation can be reduced by reduction in __________ in feed water. (A) Turbidity (B) Color (Hazen) (C) Total solids (D) All (A), (B) & (C)

Description : Foaming and priming in boiler operation can be reduced by reduction in __________ in feed water. (A) Turbidity (B) Color (Hazen) (C) Total solids (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Turbidity of raw water is a measure of (A) Suspended solids (B) Acidity of water (C) B.O.D. (D) None of these

Description : Turbidity of raw water is a measure of  (A) Suspended solids  (B) Acidity of water  (C) B.O.D.  (D) None of these 

Last Answer : (A) Suspended solids

Which one of the following tests employs Ethylene Diamine Tetra Acetic Acid as a titrating agent? (a) Chlorides (b) Dissolved oxygen (c) Hardness (d) Residual chlorine

Description : Which one of the following tests employs Ethylene Diamine Tetra Acetic Acid as a titrating agent? (a) Chlorides (b) Dissolved oxygen (c) Hardness (d) Residual chlorine

Last Answer : (c) Hardness

Direct methods to measure bacterial growth would include all the following except the a. total bacterial count b. microscopic count c. turbidity measurements d. most probable number

Description : Direct methods to measure bacterial growth would include all the following except the a. total bacterial count b. microscopic count c. turbidity measurements d. most probable number

Last Answer : c. turbidity measurements

Which of the following is NOT a physical property of crystalline boron? w) brown color x) diamond hardness y) brittleness z) high electrical resistance

Description : Which of the following is NOT a physical property of crystalline boron? w) brown color x) diamond hardness y) brittleness z) high electrical resistance 

Last Answer : ANSWER: W -- BROWN COLOR (Crystalline boron is transparent.) 

Removal of __________ is accomplished by aeration of water. (A) Dissolved gases (B) Suspended solids (C) Dissolved solids (D) None of these

Description : Removal of __________ is accomplished by aeration of water. (A) Dissolved gases (B) Suspended solids (C) Dissolved solids (D) None of these

Last Answer : (A) Dissolved gases

Pick out the wrong statement. (A) Addition of methane to the furnace atmosphere reduces decarburising by hydrogen (B) Nitrogen in presence of steam decor-burises high carbon steel, whereas hydrocarbon gases carburise the surface of steel at annealing temperatures (C) Active nitrogen (formed by cracking ammonia at the metal surface) cause nitride formation with increase in surface hardness (D) None of these

Description : Pick out the wrong statement. (A) Addition of methane to the furnace atmosphere reduces decarburising by hydrogen (B) Nitrogen in presence of steam decor-burises high carbon steel, whereas hydrocarbon ... the metal surface) cause nitride formation with increase in surface hardness (D) None of these

Last Answer : (D) None of these

Stabilisation of gasoline (petrol) means (A) Removal of dissolved gases from it (B) Increasing its oxidation stability (C) Improving its lead susceptibility (D) Increasing its vapour pressure

Description : Stabilisation of gasoline (petrol) means (A) Removal of dissolved gases from it (B) Increasing its oxidation stability (C) Improving its lead susceptibility (D) Increasing its vapour pressure

Last Answer : (A) Removal of dissolved gases from it

Clay treatment is used to remove (A) Salt from the crude oil (B) Colour & dissolved gases from cracked gasoline (C) Wax from lube oil (D) None of these

Description : Clay treatment is used to remove (A) Salt from the crude oil (B) Colour & dissolved gases from cracked gasoline (C) Wax from lube oil (D) None of these

Last Answer : (C) Wax from lube oi

When the gas to be dissolved in liquid is a/an __________ then normally co-current adsorber are used. (A) Mixture of two gases (B) Pure gas (C) Ideal gas (D) Sparingly soluble gas

Description : When the gas to be dissolved in liquid is a/an __________ then normally co-current adsorber are used. (A) Mixture of two gases (B) Pure gas (C) Ideal gas (D) Sparingly soluble gas

Last Answer : (B) Pure gas

The phenomenon occuring during pumping of a liquid solution containing dissolved gases, which may come out of the solution giving rise to gas pockets, is termed as (A) Evaporation (B) Cavitation (C) Sublimation (D) Stripping

Description : The phenomenon occuring during pumping of a liquid solution containing dissolved gases, which may come out of the solution giving rise to gas pockets, is termed as (A) Evaporation (B) Cavitation (C) Sublimation (D) Stripping

Last Answer : (B) Cavitation

Critical Air Blast (CAB) value of coke is a direct measure of its (A) Reactivity (B) Hardness (C) Strength (D) None of these

Description : Critical Air Blast (CAB) value of coke is a direct measure of its (A) Reactivity (B) Hardness (C) Strength (D) None of these

Last Answer : (A) Reactivity

Pick out the wrong statement. (A) Cokes of high reactivity are obtained from weakly coking coals (B) Cokes of high reactivity are obtained from strongly coking coals (C) Reactivity of coke is inversely proportional to its absolute density (D) Abrasion index of the coke is a measure of its hardness

Description : Pick out the wrong statement. (A) Cokes of high reactivity are obtained from weakly coking coals (B) Cokes of high reactivity are obtained from strongly coking coals (C) Reactivity of coke is inversely proportional to its absolute density (D) Abrasion index of the coke is a measure of its hardness

Last Answer : (B) Cokes of high reactivity are obtained from strongly coking coals

"Micum Index" of a coke is a measure of its (A) Reactivity (B) Porosity (C) Bulk density (D) Hardness & strength

Description : "Micum Index" of a coke is a measure of its (A) Reactivity (B) Porosity (C) Bulk density (D) Hardness & strength

Last Answer : (D) Hardness & strength

Is not a major component of magma A. partially melted mineral crystals B. water C. dissolved gases D. lava?

Description : Is not a major component of magma A. partially melted mineral crystals B. water C. dissolved gases D. lava?

Last Answer : Water is not a major component of melted rock. The heat hasturned any water into steam.

Pick up the correct statement from the following: (A) Phase of a wave is expressed as a fraction of a period with respect to a reference (B) Phase is usually specified by angular measure with one period being 360° (C) The reference for finding the phase of a wave is taken from the previous passage through zero from the negative to the positive direction (D) All of these

Description : Pick up the correct statement from the following: (A) Phase of a wave is expressed as a fraction of a period with respect to a reference (B) Phase is usually specified by angular measure with ... from the previous passage through zero from the negative to the positive direction (D) All of these

Last Answer : Answer: Option D

What is a solution A. a solid dissolved in a gas B. a solute and a solvent C. a liquid dissolved in a gas D. an amalgam of solids, liquids, and gases?

Description : What is a solution A. a solid dissolved in a gas B. a solute and a solvent C. a liquid dissolved in a gas D. an amalgam of solids, liquids, and gases?

Last Answer : B. A solute and a solvent

Presence of dissolved impurities of __________ is responsible for the red brownish color of water. (A) Carbonates (B) Bi-carbonates (C) Iron & manganese (D) Arsenic

Description : Presence of dissolved impurities of __________ is responsible for the red brownish color of water. (A) Carbonates (B) Bi-carbonates (C) Iron & manganese (D) Arsenic

Last Answer : (C) Iron & manganese

Ethylene diamine tetraacetoacetate (pron: te-tra-a-see-tow-AS-e-tate) (EDTW) is often used for which of the following: w) Determine hardness of water x) Measure the amount of zinc in a solution. y) A preservative in foods z) All of the above

Description : Ethylene diamine tetraacetoacetate (pron: te-tra-a-see-tow-AS-e-tate) (EDTW) is often used for which of the following: w) Determine hardness of water x) Measure the amount of zinc in a solution. y) A preservative in foods z) All of the above

Last Answer : ANSWER: Z -- ALL OF THE ABOVE 

Pick out the wrong statement pertaining to nitric acid. (A) About 90% of nitric acid is manufactured by Ostwald's process (B) It is a strong mono basic acid which reacts with almost all the metals except noble metals (C) Yellow color of impure nitric acid is because of dissolved oxides of nitrogen (mainly NO2 ) (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process

Description : Pick out the wrong statement pertaining to nitric acid. (A) About 90% of nitric acid is manufactured by Ostwald's process (B) It is a strong mono basic acid which reacts with almost all the ... (mainly NO2 ) (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process

Last Answer : (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process

Assertion : A white turbidity is obtained by passing `H_(2)S` through aq solution of `SO_(2)` Reason: Aq solution of `SO_(2)` and `H_(2)S` undergoes r

Description : Assertion : A white turbidity is obtained by passing `H_(2)S` through aq solution of `SO_(2)` Reason: Aq solution of `SO_(2)` and `H_(2)S` undergoes r

Last Answer : Assertion : A white turbidity is obtained by passing `H_(2)S` through aq solution of `SO_(2 ... Statement-I is not correct and Statement-II is correct

Nylon-6 as compared to nylon 66 has lower (A) Abrasion resistance (B) Thermal stability (C) Adhesion to rubber (D) Hardness

Description : Nylon-6 as compared to nylon 66 has lower (A) Abrasion resistance (B) Thermal stability (C) Adhesion to rubber (D) Hardness

Last Answer : (A) Abrasion resistance

The addition of antimony in tin-based alloys improves its (A) Rupture strength and hot hardness (B) Impact strength and bonding strength (C) Deformation resistance (D) Wear resistance

Description : The addition of antimony in tin-based alloys improves its (A) Rupture strength and hot hardness (B) Impact strength and bonding strength (C) Deformation resistance (D) Wear resistance

Last Answer : (C) Deformation resistance

Addition of tungsten to steel imparts (A) Magnetic properties (B) Cutting hardness (C) Corrosion resistance (D) Ductility

Description : Addition of tungsten to steel imparts (A) Magnetic properties (B) Cutting hardness (C) Corrosion resistance (D) Ductility

Last Answer : (B) Cutting hardness

Shock resisting steels should possess high (A) Hardness (B) Toughness (C) Tensile strength (D) Wear resistance

Description : Shock resisting steels should possess high (A) Hardness (B) Toughness (C) Tensile strength (D) Wear resistance

Last Answer : (B) Toughness

Wrought iron is having very high (A) Hardness (B) Strength (C) Corrosion resistance (D) Susceptibility to changes in its properties by heat treatment

Description : Wrought iron is having very high (A) Hardness (B) Strength (C) Corrosion resistance (D) Susceptibility to changes in its properties by heat treatment

Last Answer : (C) Corrosion resistance

Higher percentage of ash in coal meant for the production of metallurgical grade coke (A) Decreases the hardness of coke (B) Decreases the abrasion resistance of coke (C) Causes brittleness in steel (D) None of these

Description : Higher percentage of ash in coal meant for the production of metallurgical grade coke (A) Decreases the hardness of coke (B) Decreases the abrasion resistance of coke (C) Causes brittleness in steel (D) None of these

Last Answer : (D) None of these

Increase in ash content of blast furnace coke (A) Reduces its consumption in the furnace (B) Increases its consumption in the furnace (C) Does not affect its consumption in the furnace (D) Decreases its hardness and abrasion resistance

Description : Increase in ash content of blast furnace coke (A) Reduces its consumption in the furnace (B) Increases its consumption in the furnace (C) Does not affect its consumption in the furnace (D) Decreases its hardness and abrasion resistance

Last Answer : (B) Increases its consumption in the furnace

Nylon-6 as compared to Nylon-66 is having higher (A) Hardness (B) Abrasion/resistance (C) Melting point (D) None of these

Description : Nylon-6 as compared to Nylon-66 is having higher (A) Hardness (B) Abrasion/resistance (C) Melting point (D) None of these

Last Answer : (D) None of these

Non-ferrous alloys used for making cutting tools need not have high (A) Abrasion resistance (B) Toughness (C) Red hardness (D) Cutting speed

Description : Non-ferrous alloys used for making cutting tools need not have high (A) Abrasion resistance (B) Toughness (C) Red hardness (D) Cutting speed

Last Answer : (C) Red hardness

Nitriding of a steel part does not increase its (A) Grain size (B) Fatigue limit (C) Surface hardness (D) Wear resistance

Description : Nitriding of a steel part does not increase its (A) Grain size (B) Fatigue limit (C) Surface hardness (D) Wear resistance

Last Answer : Option B

M10 index of coke indicates its (A) Compressive strength (B) Hardness (C) Abrasion resistance (D) Impact strength

Description : M10 index of coke indicates its (A) Compressive strength (B) Hardness (C) Abrasion resistance (D) Impact strength

Last Answer : Option C

M10 index of coke indicates its (A) Compressive strength (B) Hardness (C) Abrasion resistance (D) Impact strength Answer: Option C

Description : M10 index of coke indicates its (A) Compressive strength (B) Hardness (C) Abrasion resistance (D) Impact strength Answer: Option C

Last Answer : Option C

Presence of bacteria in potable (drinking) water causes (A) Turbidity (B) Disease (C) Bad odour (D) Bad taste & colour

Description : Presence of bacteria in potable (drinking) water causes (A) Turbidity (B) Disease (C) Bad odour (D) Bad taste & colour

Last Answer : (B) Disease

Maximum permissible turbidity in potable water is __________ ppm. (A) 1 (B) 10 (C) 250 (D) 1000

Description : Maximum permissible turbidity in potable water is __________ ppm. (A) 1 (B) 10 (C) 250 (D) 1000

Last Answer : (B) 10

Presence of nitrogen and phosphorous in waste water discharged into lakes and ponds causes (A) Foaming(B) Odour nuisances(C) Undesirable plant growth(D) Turbidity

Description : Presence of nitrogen and phosphorous in waste water discharged into lakes and ponds causes (A) Foaming (B) Odour nuisances (C) Undesirable plant growth (D) Turbidity

Last Answer : (C) Undesirable plant growth