Turbidity of water is expressed (A) In ppm (B) In numbers in an arbitrary scale (C) By pH value (D) By colour code

Turbidity of water is expressed 

(A) In ppm 

(B) In numbers in an arbitrary scale 



(C) By pH value 

(D) By colour code 

by

1 Answer

Answer :

(A) In ppm

by

Related questions

The maximum permissible colour for domestic supplies based on cobalt scale, is (A) 5 ppm (B) 10 ppm (C) 15 ppm (D) 20 ppm

Description : The maximum permissible colour for domestic supplies based on cobalt scale, is (A) 5 ppm (B) 10 ppm (C) 15 ppm (D) 20 ppm

Last Answer : (D) 20 ppm

Recuperation test is carried out to determine (A) Turbidity of water (B) pH value of water (C) Yield of well (D) Discharge from a well

Description : Recuperation test is carried out to determine  (A) Turbidity of water  (B) pH value of water  (C) Yield of well  (D) Discharge from a well 

Last Answer : (A) Turbidity of water 

Maximum permissible turbidity in potable water is __________ ppm. (A) 1 (B) 10 (C) 250 (D) 1000

Description : Maximum permissible turbidity in potable water is __________ ppm. (A) 1 (B) 10 (C) 250 (D) 1000

Last Answer : (B) 10

Consider the following statements. The following factors relate to the process of coagulation : 1. Percentage removal is higher when turbidity is more 2. Additional of activated silica aids in the process of coagulation 3. pH of water is an important consideration for selecting a coagulant Which of the following statements are correct ? a) 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Description : Consider the following statements. The following factors relate to the process of coagulation : 1. Percentage removal is higher when turbidity is more 2. Additional of activated silica aids in the process of coagulation 3. pH of water ... 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Last Answer : a) 1, 2 and 3

Disinfection of drinking water, is done to remove (A) Odour (B) Bacterias (C) Turbidity (D) Colour

Description : Disinfection of drinking water, is done to remove (A) Odour (B) Bacterias (C) Turbidity (D) Colour

Last Answer : (B) Bacterias

Filtration of water is done to remove (A) Colour (B) Odour (C) Turbidity (D) Pathogenic bacteria

Description : Filtration of water is done to remove (A) Colour (B) Odour (C) Turbidity (D) Pathogenic bacteria

Last Answer : (C) Turbidity

Disappearance of pink colour of water of a well due of KMnO4 indicates that water contains (A) Acidity (B) Alkalinity (C) Turbidity (D) Organic matter

Description : Disappearance of pink colour of water of a well due of KMnO4 indicates that water contains (A) Acidity (B) Alkalinity (C) Turbidity (D) Organic matter

Last Answer : (D) Organic matter

Disinfection of drinking water is done to remove (A) Turbidity (B) Odour (C) Colour (D) Bacterias

Description : Disinfection of drinking water is done to remove (A) Turbidity (B) Odour (C) Colour (D) Bacterias

Last Answer : (D) Bacterias

Aeration of water is done to remove (A) Odour (B) Colour (C) Bacterias (D) Turbidity

Description : Aeration of water is done to remove  (A) Odour  (B) Colour  (C) Bacterias  (D) Turbidity 

Last Answer : (A) Odour 

The best guide to judge the general quality of water is the measurement of its (A) pH value (B) Electrical conductivity (C) Turbidity (D) Dissolved oxygen content

Description : The best guide to judge the general quality of water is the measurement of its (A) pH value (B) Electrical conductivity (C) Turbidity (D) Dissolved oxygen content

Last Answer : (B) Electrical conductivity

The presence of pollutants in the environment is usually expressed in ppm, where ppm stands for: (1) particles per mole (2) purity per microgram (3) pollutant prevent measures (4) parts per million

Description : The presence of pollutants in the environment is usually expressed in ppm, where ppm stands for: (1) particles per mole (2) purity per microgram (3) pollutant prevent measures (4) parts per million

Last Answer : (4) parts per million Explanation: PPM is an abbreviation of Parts Per Million. It is commonly used as a measure of small levels of pollutants in air, water, body fluids, etc. Parts per million is the mass ratio between the pollutant component and the solution.

The presence of pollutants in the environment is usually expressed in ppm, where ppm stands for: (1) particles per mole (2) purity per microgram (3) pollutant prevent measures (4) parts per million

Description : The presence of pollutants in the environment is usually expressed in ppm, where ppm stands for: (1) particles per mole (2) purity per microgram (3) pollutant prevent measures (4) parts per million

Last Answer : parts per million

Presence of bacteria in potable (drinking) water causes (A) Turbidity (B) Disease (C) Bad odour (D) Bad taste & colour

Description : Presence of bacteria in potable (drinking) water causes (A) Turbidity (B) Disease (C) Bad odour (D) Bad taste & colour

Last Answer : (B) Disease

Alum [Al2 (SO4 )3 ] is used as a coagulant in water treatment to remove (A) Colour (B) Turbidity (C) Bacteria (D) All (A), (B) and (C)

Description : Alum [Al2 (SO4 )3 ] is used as a coagulant in water treatment to remove (A) Colour (B) Turbidity (C) Bacteria (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the true statement pertaining to water treatment. (A) Slow sand filters can remove colour completely (B) Activated carbon can be used for taste & odour control without subsequent filtration (C) Application of activated carbon reduces the temporary hardness of water (D) Normally, the turbidity is removed by adding a coagulant prior to sedimentation

Description : Pick out the true statement pertaining to water treatment. (A) Slow sand filters can remove colour completely (B) Activated carbon can be used for taste & odour control without subsequent filtration ... of water (D) Normally, the turbidity is removed by adding a coagulant prior to sedimentation

Last Answer : (D) Normally, the turbidity is removed by adding a coagulant prior to sedimentation

Aeration Of water is done to remove a) Odour* b) Colour c) Bacterias d) Hardness e) Turbidity

Description : Aeration Of water is done to remove a) Odour* b) Colour c) Bacterias d) Hardness e) Turbidity

Last Answer : a) Odour*

What is the colour of carbon dioxide solution on a pH scale?

Description : What is the colour of carbon dioxide solution on a pH scale?

Last Answer : Need answer

Q No: 271 Pick up the correct statement from the following: A. Turbidity is more in strong sewage B. The black colour indicates septic sewage C. The sewage omits offensive odours after four hours D. All the above

Description : Q No: 271 Pick up the correct statement from the following: A. Turbidity is more in strong sewage B. The black colour indicates septic sewage C. The sewage omits offensive odours after four hours D. All the above

Last Answer : ANS: D

The following is the physical characteristic of sewage A. Turbidity B. Colour C. Odour D. All the above

Description : The following is the physical characteristic of sewage A. Turbidity B. Colour C. Odour D. All the above

Last Answer : ANS: D

Solid Sulphur (32 g/mole)pH = 7.16pH in ppm?

Description : Solid Sulphur (32 g/mole)pH = 7.16pH in ppm?

Last Answer : PO43−

How to convert ph to ppm?

Description : How to convert ph to ppm?

Last Answer : Write an equation representing the ppm concentration: ppm = mass solute (mg) ÷ volume solution (L) Extract the data from the question: mass solute (NaCl) = 0.0045 g. ... Convert the mass in grams to a mass in milligrams: mass NaCl = 0.0045 g = 0.0045 g × 1000 mg/g = 4.5 mg.

The following proportion of the ingredients of concrete mix, is not in conformation to arbitrary method of proportioning (A) 1 : 1 : 2 (B) 1 : 2 : 4 (C) 1 : 3 : 6 (D) 1 : 4 : 10

Description : The following proportion of the ingredients of concrete mix, is not in conformation to arbitrary method of proportioning (A) 1 : 1 : 2 (B) 1 : 2 : 4 (C) 1 : 3 : 6 (D) 1 : 4 : 10

Last Answer : Answer: Option D

Slow sand filter is used if maximum turbidity of raw water is less than (A) 10 gm/litre (B) 20 gm/litre (C) 30 gm/litre (D) 50 gm/litre

Description : Slow sand filter is used if maximum turbidity of raw water is less than (A) 10 gm/litre (B) 20 gm/litre (C) 30 gm/litre (D) 50 gm/litre

Last Answer : (D) 50 gm/litre

Rapid gravity filter can only remove turbidity of water upto (A) 15 to 25 gm/litre (B) 25 to 30 gm/litre (C) 30 to 35 cm/litre (D) 35 to 40 gm/litre

Description : Rapid gravity filter can only remove turbidity of water upto (A) 15 to 25 gm/litre (B) 25 to 30 gm/litre (C) 30 to 35 cm/litre (D) 35 to 40 gm/litre

Last Answer : (D) 35 to 40 gm/litre

Hard water for public water supply is discarded because (A) It consumes more soap (B) It contains lot of turbidity (C) It contains pathogenic bacterias (D) It possesses bad taste and odour

Description : Hard water for public water supply is discarded because (A) It consumes more soap (B) It contains lot of turbidity (C) It contains pathogenic bacterias (D) It possesses bad taste and odour

Last Answer : (A) It consumes more soap

Low turbidity of water is detected by (A) Turbidity tube (B) Jackson turbidity mete(C) Baylis turbidimeter (D) Hellige turbidimeter

Description : Low turbidity of water is detected by  (A) Turbidity tube  (B) Jackson turbidity mete (C) Baylis turbidimeter  (D) Hellige turbidimeter 

Last Answer : (C) Baylis turbidimeter

In slow sand filters, the turbidity of raw water can be removed only up to (A) 60 mg/litre (B) 75 mg/litre (C) 100 gm/litre (D) 150 mg/litre

Description : In slow sand filters, the turbidity of raw water can be removed only up to  (A) 60 mg/litre  (B) 75 mg/litre  (C) 100 gm/litre  (D) 150 mg/litre 

Last Answer : (A) 60 mg/litre 

Standard unit of turbidity of water is in one litre of distilled water, one milligram of finely divided (A) Silica (B) Mud (C) Clay (D) Organic matter

Description : Standard unit of turbidity of water is in one litre of distilled water, one milligram of finely divided  (A) Silica  (B) Mud  (C) Clay  (D) Organic matter 

Last Answer : (A) Silica 

Hardness of water is caused by (A) Presence of soap lather (B) Presence of chlorides and sulphates of sodium and potassium (C) Presence of bicarbonates, sulphates or chlorides of calcium and magnesium (D) Turbidity

Description : Hardness of water is caused by  (A) Presence of soap lather  (B) Presence of chlorides and sulphates of sodium and potassium  (C) Presence of bicarbonates, sulphates or chlorides of calcium and magnesium  (D) Turbidity 

Last Answer : (C) Presence of bicarbonates, sulphates or chlorides of calcium and magnesium 

Turbidity of water may be caused due to (A) Suspended clay (B) Suspended silt (C) Finely divided organic material (D) All the above

Description : Turbidity of water may be caused due to  (A) Suspended clay  (B) Suspended silt  (C) Finely divided organic material  (D) All the above 

Last Answer : (D) All the above 

In a rapid sand filter, air binding is caused due to excessive (A) Negative pressure (B) Pressure (C) Turbidity (D) Water pressure

Description : In a rapid sand filter, air binding is caused due to excessive  (A) Negative pressure  (B) Pressure  (C) Turbidity  (D) Water pressure

Last Answer : (A) Negative pressure

Turbidity of raw water is a measure of (A) Suspended solids (B) Acidity of water (C) B.O.D. (D) None of these

Description : Turbidity of raw water is a measure of  (A) Suspended solids  (B) Acidity of water  (C) B.O.D.  (D) None of these 

Last Answer : (A) Suspended solids

On nephelometry turbidity unit (NTU) is equal to the turbidity produced by (a) 1 mg SiO2 dissolved in 1 l of distilled water with the test being run according to absorption principle (b) 1 mg SiO2 dissolved in 1 l of distilled water with the test being run according t scattering principle (c) 1 mg Formazin dissolved in 1 l of distilled water with the test being run according to absorption principle (d) 1 mg Formazin dissolved in 1 l o f distilled water with the test being run according to scattering principle.

Description : On nephelometry turbidity unit (NTU) is equal to the turbidity produced by (a) 1 mg SiO2 dissolved in 1 l of distilled water with the test being run according to absorption principle (b) 1 ... Formazin dissolved in 1 l o f distilled water with the test being run according to scattering principle.

Last Answer : (d) 1 mg Formazin dissolved in 1 l o f distilled water with the test being run according to scattering principle.

To detect the turbidity of the order of 0 to 1000 P.P.M. the instrument used is (A) Turbidimeter (B) Jackson turbidimeter (C) Baylis turbidimeter (D) Hellige turbidimeter

Description : To detect the turbidity of the order of 0 to 1000 P.P.M. the instrument used is (A) Turbidimeter (B) Jackson turbidimeter (C) Baylis turbidimeter (D) Hellige turbidimeter

Last Answer : (C) Baylis turbidimeter

Maximum permissible colour for domestic water supplies, based on Cobalt scale, is (A) 5 P.P.M. (B) 10 P.P.M. (C) 15 P.P.M. (D) 20 P.P.M.

Description : Maximum permissible colour for domestic water supplies, based on Cobalt scale, is (A) 5 P.P.M. (B) 10 P.P.M. (C) 15 P.P.M. (D) 20 P.P.M.

Last Answer : (D) 20 P.P.M.

In a pocket of A, the ratio of Rs.1 coins, 50p coins and 25p coins can be expressed by three consecutive odd prime numbers that are in ascending order. The total value of coins in the bag is Rs 58. If the number of Rs.1, 50p, 25p coins are reversed, find the new total value of coins in the pocket of A? A) Rs 68 B) Rs 43 C) Rs 75 D) Rs 82 E) NONE

Description : In a pocket of A, the ratio of Rs.1 coins, 50p coins and 25p coins can be expressed by three consecutive odd prime numbers that are in ascending order. The total value of coins in the bag is Rs 58. If the number of Rs.1 ... of coins in the pocket of A? A) Rs 68 B) Rs 43 C) Rs 75 D) Rs 82 E) NONE

Last Answer : Answer: D  Since the ratio of the number of Rs. 1, 50p and 25p coins can be represented by 3 consecutive odd numbers that are prime in ascending order, the only possibility for the ratio is 3:5:7. Let the number of ... =100 7k+50 5k+25 3k=1025k (In above we find the value of k). ⇒ 8200p = Rs 82.

What is the pH value and colour of paper of ammonia solution?

Description : What is the pH value and colour of paper of ammonia solution?

Last Answer : Need answer

Colour comparator is used to measure the (A) pH value (B) Electrode potential (C) Colour intensity (D) None of these

Description : Colour comparator is used to measure the (A) pH value (B) Electrode potential (C) Colour intensity (D) None of these

Last Answer : Option A

Scale formation in boiler is controlled by (A) Preheating of feed water (B) Reduction in hardness, silica & alumina in feed water (C) Keeping the pH value of feed water just below 7 (D) Eliminating H2S in feed water

Description : Scale formation in boiler is controlled by (A) Preheating of feed water (B) Reduction in hardness, silica & alumina in feed water (C) Keeping the pH value of feed water just below 7 (D) Eliminating H2S in feed water

Last Answer : (B) Reduction in hardness, silica & alumina in feed water

The nitrate concentration in domestic water supplies, is generally limited to (A) 10 ppm (B) 15 ppm (C) 30 ppm (D) 45 ppm

Description : The nitrate concentration in domestic water supplies, is generally limited to (A) 10 ppm (B) 15 ppm (C) 30 ppm (D) 45 ppm

Last Answer : (D) 45 ppm

The permissible amount of nitrites present in potable water, is (A) 10 ppm (B) 15 ppm (C) 45 ppm (D) Nil

Description : The permissible amount of nitrites present in potable water, is (A) 10 ppm (B) 15 ppm (C) 45 ppm (D) Nil

Last Answer : (D) Nil

The chloride content of treated water for public supplies should not exceed (A) 100 ppm (B) 150 ppm (C) 200 ppm (D) 250 ppm

Description : The chloride content of treated water for public supplies should not exceed (A) 100 ppm (B) 150 ppm (C) 200 ppm (D) 250 ppm

Last Answer : (D) 250 ppm

B.O.D. of treated water should be (A) 10 ppm (B) 25 ppm (C) 20 ppm (D) Nil

Description : B.O.D. of treated water should be (A) 10 ppm (B) 25 ppm (C) 20 ppm (D) Nil

Last Answer : (D) Nil

Pick up the correct statement from the following: (A) Water with hardness upto 75 ppm is considered soft (B) Water with hardness more than 200 ppm is considered hard (C) Water needed for laundries should contain hardness less than 75 ppm (D) All the above

Description : Pick up the correct statement from the following:  (A) Water with hardness upto 75 ppm is considered soft  (B) Water with hardness more than 200 ppm is considered hard  (C) Water needed for laundries should contain hardness less than 75 ppm  (D) All the above 

Last Answer : (D) All the above 

When a river’s water level reaches 10 metres, this means that: (a) the water level is 10 metres above an arbitrary ‘zero’ level (b) the water level is 10 metres above mean sea level (c) the water level is 10 metres above mean sea level or an arbitrary 'zero' level (d) it will flood.

Description : When a river’s water level reaches 10 metres, this means that: (a) the water level is 10 metres above an arbitrary ‘zero’ level (b) the water level is 10 metres above mean sea level (c) the water level is 10 metres above mean sea level or an arbitrary 'zero' level (d) it will flood.

Last Answer : (c) the water level is 10 metres above mean sea level or an arbitrary 'zero' level

The workability of concrete is expressed by (a) Water-cement ratio (b) Slump value (c) Compaction factor (d) Both (a) and (b)

Description : The workability of concrete is expressed by (a) Water-cement ratio (b) Slump value (c) Compaction factor (d) Both (a) and (b)

Last Answer : (d) Both (a) and (b)

Can I use an arbitrary webpage for my domain?

Description : Can I use an arbitrary webpage for my domain?

Last Answer : Not really, for a domain completely your own you need to set up apache or something simmilar on your own computer, and register a your static IP with a DNS service, then the DNS service that you pay for routes traffic going to yourdomain.com to that IP.

Can beauty be quantified or is it arbitrary by nature to the group or society you are in?

Description : Can beauty be quantified or is it arbitrary by nature to the group or society you are in?

Last Answer : i heard about a study where they [some scientists-that's what they said they were] looked at differnt societies from around the world and tried to find what made a woman beautiful. they found only 3 ... but i'm sure good bone stucture should fall in there but that wasn't one of the 3.

Are NASCAR vehicles "organically" related to the conventional models they are named for, or is the link arbitrary/marketing.

Description : Are NASCAR vehicles "organically" related to the conventional models they are named for, or is the link arbitrary/marketing.

Last Answer : I do not know, what I do know though that in the superior DTM series, only the body shell is taken from the original models, the rest is a custom developed pure race car.

Why is women's clothing sizing so arbitrary?

Description : Why is women's clothing sizing so arbitrary?

Last Answer : It's not at all arbitrary. It is carefully designed to be confusing because marketers don't want larger women to be turned off by plus sized clothing, and they don't want young, skinny teenagers to be put off ... a size 4. Real women are generally around a 14 to 16, but they don't want to know it.